Geology Reports⌕ Search

Geology topics

Nikolas I. Christensen

Publications and source records attributed to Nikolas I. Christensen.

7 recordsLinked to original sources
USGS2012

Thin, low‐velocity crust beneath the southern Yukon‐Tanana Terrane, east central Alaska: Results from Trans‐Alaska crustal transect refraction/wide‐angle reflection data

A seismic refraction/wide‐angle reflection survey for the Trans‐Alaska Crustal Transect program reveals a thin, reflective crust beneath the southern Yukon‐Tanana terrane (YTT) in east central Alaska. These data are the first detailed refraction survey of the southern YTT and compose a 130‐km‐long reversed profile along the Alaska and Richardson highways. Results from this study indicate that low‐velocity (≤ 6.4 km/s) rocks extend to approximately 27 km in depth. Based on these low velocities and an average Poisson's ratio of 0.23 determined for depths of ≤27 km, an overall silicic composition is interpreted for this portion of the crust beneath the Yukon‐Tanana terrane. From approximately 8 to 27 km depth the crust exhibits an increase in reflectivity. This middle to lower crustal reflectivity is modeled as alternating high‐ and low‐velocity lamellae with an average velocity of 6.1 km/s at 10 km depth to an average velocity of 6.4 km/s at 27 km depth. Beneath these reflective, low‐velocity rocks a 3‐ to 5‐km‐thick, 7.0 km/s basal crustal layer produces a prominent reflection that extends to offsets of up to 280 km. The crust‐mantle boundary, modeled at an average depth of 30 km, produces a variable PmP reflection, which may indicate lateral heterogeneity of this boundary, and a weak and emergent Pn refraction with a velocity of 8.2 km/s. We interpret the crustal section as follows: the low‐velocity rocks of the southern YTT extend from the surface to depths of approximately 10 km; underthrust Mesozoic flysch of the Kahiltna terrane, rocks of the Gravina arc, and basement of the Wrangellia(?) terrane extend from 10 to 27 km depth; a 3‐ to 5‐km‐thick layer of mantle‐derived mafic rocks, relic oceanic crust, or Wrangellia(?) terrane lower crust extends from 27 to approximately 30 km depth; a tectonically young Moho beneath the southern YTT is found at an average depth of 30 km; and it is underlain by a mantle that may be relatively cool and/or olivine rich. In this interpretation, the Yukon‐Tanana terrane is a thin‐skinned terrane. Our results indicate that tectonic, and possibly magmatic, underplating has played a significant role in crustal growth for central Alaska.

Alaska↗
USGS2012

Seismic velocity structure and composition of the continental crust: A global view

Seismic techniques provide the highest‐resolution measurements of the structure of the crust and have been conducted on a worldwide basis. We summarize the structure of the continental crust based on the results of seismic refraction profiles and infer crustal composition as a function of depth by comparing these results with high‐pressure laboratory measurements of seismic velocity for a wide range of rocks that are commonly found in the crust. The thickness and velocity structure of the crust are well correlated with tectonic province, with extended crust showing an average thickness of 30.5 km and orogens an average of 46.3 km. Shields and platforms have an average crustal thickness nearly equal to the global average. We have corrected for the nonuniform geographical distribution of seismic refraction profiles by estimating the global area of each major crustal type. The weighted average crustal thickness based on these values is 41.1 km. This value is 10% to 20% greater than previous estimates which underrepresented shields, platforms, and orogens. The average compressional wave velocity of the crust is 6.45 km/s, and the average velocity of the uppermost mantle ( Pn velocity) is 8.09 km/s. We summarize the velocity structure of the crust at 5‐km depth intervals, both in the form of histograms and as an average velocity‐depth curve, and compare these determinations with new measurements of compressional wave velocities and densities of over 3000 igneous and metamorphic rock cores made to confining pressures of 1 GPa. On the basis of petrographic studies and chemical analyses, the rocks have been classified into 29 groups. Average velocities, densities, and standard deviations are presented for each group at 5‐km depth intervals to crustal depths of 50 km along three different geotherms. This allows us to develop a model for the composition of the continental crust. Velocities in the upper continental crust are matched by velocities of a large number of lithologies, including many low‐grade metamorphic rocks and relatively silicic gneisses of amphibolite facies grade. In midcrustal regions, velocity gradients appear to originate from an increase in metamorphic grade, as well as a decrease in silica content. Tonalitic gneiss, granitic gneiss, and amphibolite are abundant midcrustal lithologies. Anisotropy due to preferred mineral orientation is likely to be significant in upper and midcrustal regions. The bulk of the lower continental crust is chemically equivalent to gabbro, with velocities in agreement with laboratory measurements of mafic granulite. Garnet becomes increasingly abundant with depth, and mafic garnet granulite is the dominant rock type immediately above the Mohorovicic discontinuity. Average compressional wave velocities of common crustal rock types show excellent correlations with density. The mean crustal density calculated from our model is 2830 kg/m 3 , and the average SiO 2 content is 61.8%.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Density and velocity relationships for digital sonic and density logs from coastal Washington and laboratory measurements of Olympic Peninsula mafic rocks and greywackes

Three-dimensional velocity models for the basins along the coast of Washington and in Puget Lowland provide a means for better understanding the lateral variations in strong ground motions recorded there. We have compiled 16 sonic and 18 density logs from 22 oil test wells to help us determine the geometry and physical properties of the Cenozoic basins along coastal Washington. The depth ranges sampled by the test-well logs fall between 0.3 and 2.1 km. These well logs sample Quaternary to middle Eocene sedimentary rocks of the Quinault Formation, Montesano Formation, and Hoh rock assemblage. Most (18 or 82%) of the wells are from Grays Harbor County, and many of these are from the Ocean City area. These Grays Harbor County wells sample the Quinault Formation, Montesano Formation, and frequently bottom in the Hoh rock assemblage. These wells show that the sonic velocity and density normally increase significantly across the contacts between the Quinault or the Montesano Formations and the Hoh rock assemblage. Reflection coefficients calculated for vertically traveling compressional waves from the average velocities and densities for these units suggest that the top of the Hoh rock assemblage is a strong reflector of downward-propagating seismic waves: these reflection coefficients lie between 11 and 20%. Thus, this boundary may reflect seismic energy upward and trap a substantial portion of the seismic energy generated by future earthquakes within the Miocene and younger sedimentary basins found along the Washington coast. Three wells from Jefferson County provide data for the Hoh rock assemblage for the entire length of the logs. One well (Eastern Petroleum Sniffer Forks #1), from the Forks area in Clallam County, also exclusively samples the Hoh rock assemblage. This report presents the locations, elevations, depths, stratigraphic, and other information for all the oil test wells, and provides plots showing the density and sonic velocities as a function of depth for each well log. We also present two-way traveltimes for 15 of the wells calculated from the sonic velocities. Average velocities and densities for the wells having both logs can be reasonably well related using a modified Gardner’s rule, with p=1825v(1/4), where p is the density (in kg/m3) and v is the sonic velocity (in km/s). In contrast, a similar analysis of published well logs from Puget Lowland is best matched by a Gardner’s rule of p=1730v(1/4), close to the p=1740v(1/4) proposed by Gardner et al. (1974). Finally, we present laboratory measurements of compressional-wave velocity, shear-wave velocity, and density for 11 greywackes and 29 mafic rocks from the Olympic Peninsula and Puget Lowland. These units have significance for earthquake-hazard investigations in Puget Lowland as they dip eastward beneath the Lowland, forming the “bedrock” beneath much of the lowland. Average Vp/Vs ratios for the mafic rocks, mainly Crescent Formation volcanics, lie between 1.81 and 1.86. Average Vp/Vs ratios for the greywackes from the accretionary core complex in the Olympic Peninsula show greater scatter but lie between 1.77 and 1.88. Both the Olympic Peninsula mafic rocks and greywackes have lower shear-wave velocities than would be expected for a Poisson solid (Vp/Vs=1.732). Although the P-wave velocities and densities in the greywackes can be related by a Gardner’s rule of p=1720v(1/4), close to the p=1740v(1/4) proposed by Gardner et al. (1974), the velocities and densities of the mafic rocks are best related by a Gardner’s rule of p=1840v(1/4). Thus, the density/velocity relations are similar for the Puget Lowland well logs and greywackes from the Olympic Peninsula. Density/velocity relations are similar for the Washington coastal well logs and mafic rocks from the Olympic Peninsula, but differ from those of the Puget Lowland well logs and greywackes from the Olympic Peninsula.

Washington↗
USGS1997

Composition of the crust in the Grenville and Appalachian Provinces of North America inferred from VP/VS ratios

We use the ratios between P and S wave velocities (V P /V S ), derived from seismic refraction data, to infer the composition of the crust in the Grenville and the Appalachian Provinces of North America. The crust exhibits V P /V S increasing with depth from 1.64 to 1.84; there is a clear distinction between the Grenville Province (average V P /V S =1.81) and the Appalachian Province (average V P /V S =1.73) which persists at all depths. The boundary between these provinces is east dipping extending for 100 km east of the Champlain thrust. In the Appalachian Province the increase in V P /V S ratios with depth from 1.67 to 1.74±0.02 may reflect a normal decrease of silica content in the continental crust. In the Grenville Province beneath the Central Granulite Terrane, an anomalous V P /V S ratio of 1.82±0.02 is observed extending to a depth of 10 km; this correlates with the abundance of Ca‐plagioclase in the Marcy Anorthosite. At greater depth (15–20 km), where seismic lamination and high electrical conductivity is observed, V P /V S is 1.84±0.02 and correlates with the Tahawus Complex, a layered mafic intrusion. Within the 25‐km‐thick lower crust of the Grenville Province the V P /V S is 1.84±0.02 and P‐velocity is 7.0±0.1 km/s, which are typical for plagioclase‐bearing rocks (gabbro‐norite). The high V P /V S ratio in the Grenville Province has not been reported in crust of any other age. Since the Grenville Province contains 75% of the world's known anorthosites, high V P /V S ratio is related to high plagioclase. We suggest that the composition of the Grenville lower crust was significantly modified by the emplacement of the anorthosites in the mid‐Proterozoic.

Journal of Geophysical Research B: Solid Earth↗
USGS1995

Velocities of southern Basin and Range xenoliths: Insights on the nature of lower crustal reflectivity and composition

To reconcile differences between the assessments of crustal composition in the southern Basin and Range province on the basis of seismic refraction and reflection data and lower-crustal xenoliths, we measured velocities of xenoliths from the Cima volcanic field in southern California. Lower-crustal samples studied included gabbro, microgabbro, and pyroxenite. We find that the mafic xenolith velocities are compatible with regional in situ measurements from seismic refraction studies, provided that a mixture of gabbro and pyroxenite is present in the lower crust. Supporting this model are observations that many of the lower-crustal xenoliths from the Cima volcanic field are composites of these rock types, with igneous contacts. Vertical incidence synthetic seismograms show that a gabbroic lower crust with occasional pyroxenite layering can produce a reflective lower crust that is similar in texture to that shown by seismic reflection data recorded nearby.

California↗