Geology Reports⌕ Search

Geology topics

Niki E. Wintzer

Publications and source records attributed to Niki E. Wintzer.

14 recordsLinked to original sources

Global pegmatite-hosted lithium, cesium, and rubidium resources: A dataset for grade and tonnage modeling

Quantitative mineral resource assessments of potential undiscovered deposits can inform future mineral supply scenarios, but their accuracy is conditional on building robust grade and tonnage models of known deposits. This study presents an up-to-date global compilation and analysis of recently discovered and original, in-situ pegmatite-hosted Li, Cs, and Rb resources prior to historic production. Our analysis yields a median tonnage of 21.2 million tons (Mt) and grade of 1.12% Li 2 O, respectively, for global Li pegmatite deposits ( n = 73). The grades and tonnages of Li pegmatite resources vary depending on the age of the bedrock host domain, pegmatite crystallization age, and primary ore mineralogy. Lithium pegmatite resources hosted in Archean to transitional Archean-Paleoproterozoic domains have the largest median tonnage (29.8 Mt; n = 38), and those hosted in Paleoproterozoic to Mesoproterozoic domains have smaller median tonnages (6.5 Mt; n = 16). Cesium deposits where pollucite is the primary ore mineral have a bimodal grade distribution, with modes of 2.40 and 0.035 wt% Cs 2 O for high- and low-grade deposits, respectively, while Rb deposits are more unimodal with a median grade of 0.247 wt% Rb 2 O. Pegmatite-hosted Cs and Rb resources have median tonnages of 7.6 and 6.3 Mt, respectively. Covariation between ore mineralogy and the degree of crustal enrichment in pegmatite-hosted deposits is diagnostic of petrogenetic differences, including melt source characteristics, magma evolution, or variable degrees of volatile solubility. The Li pegmatite compilation is suitable for fitting robust numerical models to support quantitative assessments. More well-defined Rb and Cs pegmatite resources are required for quantitative assessments, but these data provide useful information about original in-place resources for framing supply discussions.

Ore Geology Reviews↗

Quantitative mineral resource assessment of lithium pegmatite deposits in the northern Appalachian orogen, USA

Lithium demand is projected to increase more than 48 times by 2040 due to electric vehicle production and other energy storage needs. Most lithium production is outside of the USA, thereby increasing supply chain vulnerability. The combined end use importance and heightened supply risk of lithium make this lightest metallic element a critical commodity to the USA. To mitigate this supply risk, the US Geological Survey is actively assessing lithium deposits in the USA. Herein, we detail an assessment for lithium-mineralized pegmatites in the US northern Appalachian Mountains. Permissive tracts were generated by cross-referencing tectonic and geologic maps and mineral occurrence data with mappable criteria derived from generalized and region-specific lithium pegmatite ore deposit models; tracts were then ranked as having high, medium, or low permissibility. Available geophysical and geochemical data were found to be of minimal utility for this deposit type at the scale of the assessment. The number of undiscovered deposits were estimated and integrated into probabilistic simulations, which included an expanded and updated global grade and tonnage model of pegmatite-hosted lithium ore. The estimated total amount of undiscovered resources for the northern Appalachian Orogen has a median value of 1,410,000 metric tons of Li 2 O when considering moderate correlation across sub-regions. At a confidence level of 90%, a resource of at least 90,000 metric tons of Li 2 O remains undiscovered, and at a 10% confidence level, a resource of as much as 7,380,000 metric tons Li 2 O remains undiscovered. After applying an up-to-date economic filter to convert median contained lithium to recoverable material, a correlated total of 900,000 metric tons of Li 2 O may be economically extractable, equating to enough Li 2 O to provide the current annual US lithium supply deficit (presently obtained through net imports) for 127 years at 2025 rates of apparent consumption. This period of provision will inevitably shorten with projected increasing consumption rates, emphasizing that further research could be completed to better delineate regions of high lithium resource potential and support exploration and domestic production.

Connecticut, Delaware, Maine, Massachusetts, New H↗

Timing of hydrothermal alteration and Au-Sb-W mineralization, Stibnite-Yellow Pine district, Idaho

The Stibnite-Yellow Pine district of central Idaho was mined from the early 1900s until the 1990s, extracting gold, antimony, tungsten, and mercury from veins and disseminated and replacement ores in mountainous terrain along the headwaters of the Salmon River. Mining during the two World Wars supplied critical antimony and tungsten to the war efforts. Recent exploration has delineated mineral resources of over 187 metric tons Au, 274 metric tons Ag, and 93,000 metric tons Sb. Mineralization is hosted in Cretaceous Idaho batholith granitic rocks and a sequence of Neoproterozoic to Paleozoic metasedimentary strata of carbonate and siliciclastic compositions. Historical studies outlined some of the complex paragenesis but debated the absolute age of mineralization. New petrographic and geochronologic work documents a sequence of five hydrothermal events in the Stibnite-Yellow Pine district. Event 1 is related to Cretaceous magmatic and hydrothermal activity and includes events ranging in age from 86 to 75 Ma, including sparse quartz-molybdenite veins dated at 86 Ma. Disseminated gold mineralization of event 2 is associated with sericitic alteration and sulfidation of igneous biotite and replacement of plagioclase by potassium feldspar, largely in granodiorite. Gold is present in zoned arsenian pyrite in both disseminated ores and in crosscutting carbonate-quartz veins containing pyrite and arsenopyrite. The large Yellow Pine deposit, localized at a dilatant bend in the Meadow Creek fault, hosts such disseminated and vein gold. Event 2 is interpreted as the major gold-forming event; 40 Ar/ 39 Ar ages of sericite and potassium feldspar alteration range, respectively, from 70 to 59 and 66 to 56 Ma. The long span is interpreted to reflect the age of gold mineralization and local overprinting by event 3. A narrower range from 66 to 61 Ma is interpreted to date the peak of gold mineralization and alteration. Event 3, tungsten mineralization with scheelite, is texturally later than event 2 gold and localized along the Meadow Creek structure. Event 3 scheelite has been dated by isotope dilution-thermal ionization mass spectrometry (ID-TIMS) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) U-Pb methods at 57 Ma. Event 4, best developed in the West End area, includes gold-silver–bearing quartz-carbonate-pyrite veins and breccias with epithermal textures and potassium feldspar alteration envelopes. Adularia from event 4 yields 40 Ar/ 39 Ar plateau ages of 52 to 51 Ma. Event 5 antimony and mercury mineralization consists of stibnite veins and breccia cements at the Yellow Pine and Hangar Flat deposits as well as cinnabar veins and replacements at the peripheral Fern and Hermes deposits; it is constrained by an LA-ICP-MS U-Pb date on scheelite (ca. 47 Ma) intergrown with stibnite. Minor propylitic and argillic alteration is evident in 47 Ma igneous dikes, which do not contain economic mineralization. The Au-Sb-W ores in the Stibnite-Yellow Pine mining district formed over an extended time period from about 70 to 45 Ma in multiple pulses that were localized along the Meadow Creek fault zone. Each event corresponds to episodes of magmatism and/or hydrothermal activity in the region. Insignificant event 1 skarn and molybdenum mineralization is similar in age to the Thompson Creek porphyry molybdenum deposit in central Idaho. Event 2 gold mineralization occurred during a magmatic gap in central Idaho but was synchronous with magmatism in the Bitterroot lobe further north; event 2 is similar in age to orogenic gold-arsenic mineralization at the Beartrack mine in eastern Idaho. Event 3 scheelite mineralization coincides with tungsten mineralization at the Quartz Creek deposit, late magmatism in the Bitterroot lobe, and rapid exhumation of the Atlanta lobe of the Idaho batholith. Event 4 gold mineralization is coincident with the onset of regional Challis magmatism and extension. Event 5 antimony and mercury mineralization is time-equivalent to epithermal gold mineralization in the nearby Thunder Mountain volcanic field and the peak of Challis magmatism.

Idaho↗

Quantitative mineral resource assessment of lithium pegmatite deposits in the Appalachian Orogen, USA

Lithium is classified as a U.S. critical mineral commodity, and its demand is projected to drastically increase through 2040, driven by electric vehicle production and energy storage applications (IEA 2021).Most global lithium production is not in the United States increasing vulnerability to a supply disruption. The U.S. Geological Survey is actively assessing domestic lithium deposits including lithium-bearing pegmatites in the Appalachian orogen. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical, and mineral occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. Estimates were then integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was used to estimate the amount of potentially recoverable undiscovered resources. Preliminary computations for the northern Appalachians, including application of the economic filter to the median recoverable contained resource, yields 900,000 metric tons of Li 2 O that correspond to enough Li 2 O to replace 127 years of import reliance at the current rate (7,100 t Li 2 O/yr; USGS, 2025). For the southern Appalachians, preliminary computations yielded 1,430,000 metric tons of Li 2 O, which corresponds to 201 years of import reliance.

Alabama, Connecticut, Delaware, Georgia, Maine, Ma↗

Mappable criteria for Li-mineralized pegmatites in the Appalachian orogen (utilizing the mineral systems approach)

Li-mineralized pegmatites are found throughout the Appalachian orogenic belt. Available evidence layers (e.g. tectonic setting, structures, geochemistry, geochronology) are used to develop mappable criteria for mineral resource assessments of Li-mineralized pegmatites in the northern and southern U.S. Appalachians. These evidence layers are placed into a mineral systems anatomy and classification of tectonic settings approach. We find that triggers of Li-mineralized pegmatite petrogenesis are closely associated with terrane accretion, continental collision, and orogenic collapse, spanning the Acadian to Alleghanian orogenies. These include overthickened crust in the northern Appalachians (Acadian altiplano) and terrane accretion in the southern Appalachians. The energy drivers of the system are anatexis broadly plutonism and/or deformation-related melting processes. Metal sources are associated with magmatic fluids of highly differentiated granitoids (e.g. peraluminous, S-type) and Silurian- Devonian sedimentary rocks. In many instances permeability and pathways of these systems are structurally controlled along major fault systems and within highly deformed metasedimentary rocks in the north. Notably, there are Li-mineralized pegmatite gaps along the Appalachian orogen that include: 1) regions of exposure of unfavorable metamorphic grade rocks, 2) favorable areas deeply buried by sedimentary rocks, and 3) gaps of unknown causes. Exhumation and preservation of midcrustal rocks are favourable as hosts to lithiummineralized pegmatites.

southern Appalachian mineral resourse assessment a↗

Polyphase stratabound scheelite-ferberite mineralization at Mallnock, Eastern Alps, Austria

A peculiar type of stratabound tungsten mineralization in metacarbonate rocks was discovered and explored at Mallnock (Austria) during the late 1980s. It is the only tungsten occurrence in the Eastern Alps in which scheelite is associated with wolframite (96 mol% ferberite). The tungsten prospect is located in the Austroalpine Drauzug-Gurktal Nappe System recording polyphase low-grade regional metamorphism. Raman spectroscopy of carbonaceous material yield maximum metamorphic temperatures of 296 ± 27 °C and 258 ± 27 °C, which are assigned to Variscan and Eoalpine metamorphism, respectively. Scheelite and ferberite occur as polyphase stockwork-like mineralization in Fe-rich magnesite in the northern ore zone (Mallnock North), whereas in the western ore zone (Mallnock West), scheelite-quartz veinlets are exclusively hosted in dolomitic marbles. LA-ICP-MS analyses of scheelite and ferberite yield low contents of Mo, Nb, Ta, and rare earth elements, but high contents of Na and Sr. Uranium is particularly high in scheelite (up to 200 µg/g) and makes this mineral a suitable target for U–Pb dating. In situ U–Pb dating of scheelite yielded an early Permian age (294 ± 8 Ma) for Mallnock West and a Middle Triassic age (239 ± 3 Ma) for Mallnock North. A monzodioritic dike close to Mallnock yielded a U–Pb apatite date of 282 ± 9 Ma and supports the polyphase formation of this mineralization. The U–Pb scheelite ages indicate that a model for tungsten metallogeny in the Eastern Alps must also consider remobilization of tungsten by metamorphic fluids. In the Alps, the Permian to Triassic period (ca. 290–225 Ma) is characterized by an overall extensional geodynamic setting related to the breakup of Pangea. Lithospheric thinning caused higher heat flow, low-P metamorphism, and anatexis in the lower crust, which led to enhanced crustal fluid flow in the upper crust. These processes were not only responsible for the formation of metasomatic hydrothermal magnesite and siderite deposits in the Eastern Alps but also for this unique magnesite-ferberite-scheelite mineralization at Mallnock.

Mount Mallock↗

Critical minerals in subduction-related magmatic-hydrothermal systems of the United States

During the World War and Cold War eras (1910s–1990s), domestic consumption of numerous mineral commodities relied increasingly on imported supplies. Consumption reliance has since expanded to include 50 “critical minerals” (elements and mineral commodities) that are mostly to entirely imported and subject to curtailment by suppliers or supply chain disruption. New domestic supplies of critical minerals are being pursued by mining companies and by several federal departments and agencies. Information on domestic deposits and resources of critical minerals is being compiled by the U.S. Geological Survey Mineral Resources Program, which has organized investigations by mineral system, deposit type, and commodity. Production, reserves, resources, and inventories of 21 critical minerals in domestic magmatic-hydrothermal deposits related to subduction-generated magmatism, and in tailings, slag, slimes, and electrolyte from copper concentrators, smelters, and refineries that processed some deposits, are largely restricted to Western States and Alaska. The critical mineral commodities Al, Sb, As, Bi, Co, fluorite, Ga, Ge, In, Mn, Ni, Nb, Pd, Pt, potash, Re, Ta, Te, Sn, W, and V are variably concentrated in porphyry/skarn copper-(molybdenum), skarn-replacement-vein (S-R-V) tungsten, polymetallic sulfide S-R-V intermediate sulfidation (IS), high-sulfidation gold-silver, low-sulfidation gold-silver, and lithocap alunite deposit types. These deposit types occur in porphyry copper-molybdenum-gold, alkalic porphyry, porphyry tin (granite related), and reduced intrusion-related mineral systems. Production, reserves, and resources of Co, Ni, Nb, Pd, Pt, Ta, Sn, and V in subduction-related deposits in Western States are insignificant to small, mostly equivalent to months to a few years of recent annual domestic consumption (2016–2020). Significant inventories, equivalent to 2 or more years of consumption of aluminum, antimony, potash, and tungsten in unmined S-R-V tungsten, polymetallic sulfide S-R-V-IS, and lithocap alunite deposits vary from approximately 2 to 8 years. Several decades of consumption of arsenic, bismuth, fluorite, gallium, germanium, and indium exist in some polymetallic sulfide S-R-V-IS and lithocap alunite deposit types. Based on concentrations of critical minerals in reserves, resources, drill holes, and deposit domains (ore types), and in captive refinery records, the largest domestic inventories of Sb, As, Bi, Re, and Te, and possibly Ga, Ge, In, Sn, and W, are in porphyry copper-molybdenum (Cu-Mo) deposits in Alaska, Idaho, Utah, and Arizona, and in interim products of processing porphyry Cu-Mo deposit ores for recovery of copper and molybdenum. Concentrations of critical minerals in archival specimens and sample collections, although somewhat biased by collection and conservation decisions and categorization, are broadly proportionate to those in reserves, resources, and drill holes. These concentrations imply significant inventories of some critical minerals in deposits for which production, resources, and refinery records are unavailable or incomplete. Because of the large masses of ores mined and processed annually (hundreds of millions of metric tons) and in reserves and resources (hundreds of millions of metric tons to billions of metric tons), calculated inventories of critical minerals in porphyry Cu-Mo deposits are equivalent to decades and centuries of recent consumption. However, these inventories should not be considered consumable supplies without reserve definition and development of economically viable mining plans and recovery techniques. An expeditious strategy for elimination or reduction of import reliance is recovery, and improved recovery efficiency, of Sb, As, Bi, Re, and Te, and possibly Ga, Ge, In, Ni, Sn, Ti, and W; during concentration and refining of copper and molybdenum minerals in ores of operating porphyry Cu-Mo mines; and in unmined porphyry Cu-Mo resources. These chalcophile, siderophile, and lithophile critical minerals, often undetectable in ore, are concentrated (hundreds of parts per million to percents) in slimes and electrolyte during copper electrorefining or could be recovered, in part, during sulfide concentration and smelting. Other than rhenium (recovered during molybdenum refining) and tellurium, all have been routinely discarded. Subsidization (for example, commodity price guarantees, tax credits, recovery technology development), political initiative, and (or) sustained market favorability could support new production of critical mineral commodities from subduction-related magmatic-hydrothermal deposits in Western States. In addition, insufficient domestic refining capacity could relegate the large inventories of critical minerals in porphyry Cu-Mo reserves and resources (for example, Pebble, Alaska; Resolution and Copper World [Rosemont], Arizona) to exportation in concentrates and importation insecurity, fortifying their present status.

Scientific Investigations Report↗

U-Pb scheelite ages of tungsten and antimony mineralization in the Stibnite-Yellow Pine district, central Idaho

The Stibnite-Yellow Pine district contains the largest antimony resource in the United States, as well as significant gold, and is a historic producer of tungsten. Application of in situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) direct dating of scheelite from two Au-Sb-W ore deposits, Yellow Pine and Hangar Flats, yielded an older group of U-Pb ages in the range of 60.0 ± 2.8 to 57.0 ± 1.1 Ma and a younger U-Pb age for scheelite intergrown with stibnite of 47.4 ± 1.1 Ma. These in situ analyses were calibrated by isotope dilution-thermal ionization mass spectrometry (ID-TIMS) U-Pb lower intercept ages of two coarsely crystalline scheelite samples that yielded ages of 57.52 ± 0.22 and 56.62 ± 0.16 Ma. Scheelite of the latter age is of sufficient quality to serve as a primary reference material for LA-ICP-MS scheelite U-Pb geochronology. The group of older U-Pb scheelite ages agrees with 40 Ar/ 39 Ar ages of 56.9 ± 1.2 to 56.38 ± 0.54 Ma on adularia from Yellow Pine and Hangar Flats, whereas the younger U-Pb scheelite age is similar to an 40 Ar/ 39 Ar age of 46.00 ± 0.40 Ma on adularia from an epithermal gold-silver deposit in the adjacent Thunder Mountain caldera. Our results indicate that the main stage of tungsten mineralization occurred at ca. 57 Ma, whereas the main stage of antimony mineralization occurred at ca. 47 Ma—thereby providing first-time age constraints for antimony and tungsten mineralization in the Stibnite-Yellow Pine district.

Idaho↗

Geologic map of the Stibnite mining area, Valley County, Idaho

The Stibnite mining area, as used herein, is bounded by the map extent that includes the Yellow Pine, West End, and Hangar Flats ore bodies. Other ore bodies are nearby, but the purpose of this map is to offer a detailed (1:8,000 scale) geologic map with new cross sections in the immediate area of Stibnite, Idaho. This geologic map is very similar to the Stibnite quadrangle map (Stewart and others, 2016) particularly the units and structure descriptions, because of the overlap of map extent. The new work by the author includes: (1) the topographic lines generated from the LiDAR base (courtesy of Midas Gold Corporation); (2) additional structural measurements; (3) revision of geologic unit contact placements particular around West End and Stibnite pits among other locations; and (4) seven new cross sections. New structural measurements from field work account for 20 percent of measurements shown with the remaining from Midas Gold Corp., Smitherman (1985), and the Stibnite quadrangle map (Stewart and others, 2016). Locations of many shallow features in the cross sections are controlled by core logs of 48 drillholes provided by Midas Gold Corp. The logs include dike placement, dike to plutonic bodies relationships, metasedimentary body localities, and dips of stratigraphic units. The law of sines was used to calculate dip of contacts between metasedimentary units for each cross section. Other features at depth in the cross sections are schematic based on nearby surface features and overall geologic interpretation. The map area contains metamorphosed sediments of Neoproterozoic and Paleozoic age within the Stibnite roof pendant. This rock package is open to tightly folded and reached lower amphibolite facies metamorphism during the Cretaceous Period. Most of the metasedimentary rocks are nearly vertical to overturned and young to the southwest, except on the southwestern flank of the Garnet Creek syncline. Pulses of the Idaho batholith granitoids intruded the metasedimentary units found in the Stibnite roof pendant. Faulting with apparent reverse, normal, and/or strike-slip offset are all present within the map area. Mineralization is largely fault controlled with some stratigraphic control. Volumetrically minor dikes, sills, and small intrusions are of Eocene age, and these intrusions are mostly depicted on the cross sections. Quaternary surficial deposits occur in stream beds and glaciated areas. Field work was conducted during the summers of 2013, 2015, and 2016. For consistency with recent research, most of the Stibnite quadrangle geologic map units (Stewart and others, 2016) are used for this geologic map. Intrusive units Kqd and Tba are new. The additional geologic mapping by the authors and compilation of detailed geologic maps from Midas Gold Corp. enhanced resolution. Cross sections incorporated drill core data including rock type, unit thickness, and oriented structural measurements offering detailed subsurface control. Data access was courtesy of Midas Gold Corp. Reed S. Lewis, Russell V. Di Fiori, and Claudio Berti provided constructive reviews that significantly improved this maps and cross sections. Previous studies that focus on mineralization include Schrader and Ross (1925), Currier (1935), White (1940), Cooper (1951), Cookro and others (1988), and more recently Gillerman and others (2019). Digital map files are available online (Wintzer, 2022).

Idaho↗

Qualitative assessment of selected areas of the world for undiscovered sediment-hosted stratabound copper deposits: Chapter Y in Global mineral resource assessment

A qualitative mineral resource assessment of sediment-hosted stratabound copper mineralized areas for undiscovered copper deposits was performed for 10 selected areas of the world. The areas, in alphabetical order, are (1) Belt-Purcell Basin, United States and Canada; (2) Benguela and Cuanza Basins, Angola; (3) Chuxiong Basin, China; (4) Dongchuan Group rocks, China; (5) Egypt–Israel–Jordan Rift, Egypt, Israel, and Jordan; (6) Maritimes Basin, Canada; (7) Neuquén Basin, Argentina; (8) Northwest Botswana Rift, Botswana and Namibia; (9) Redstone Copperbelt, Canada; and (10) Salta Rift System, Argentina. This assessment (1) outlines the main characteristics of the areas, (2) classifies known deposits by deposit model subtypes, and (3) ranks the areas according to their potential to contain undiscovered copper deposits. An analytic hierarchy process (AHP) was used to rank assessment areas according to their potential for undiscovered copper deposits. Once the main characteristics of each area were compiled (age of host rock, geologic setting, stratigraphy, host lithology, deposit subtype(s), known deposits and occurrences, and mineral system components), three criteria (mineralization, extent of study area, and lithostratigraphic framework, each with multiple subcriteria) were scored for all assessment areas. Relative weights and scores were assigned to all criteria by three geologists. In addition, the assessment areas were ranked for comparison exclusively on the basis of professional opinion. The AHP and professional opinion lists are similar but not the same. Both the professional opinion and the cumulative AHP lists rate the Northwest Botswana Rift in Botswana and Namibia as the area most likely to contain the most undiscovered copper deposits. The Salta Rift System in Argentina is rated lowest among the 10 qualitatively assessed areas.

Belt-Purcell Basin, Benguela Basin, Cuanza Basin, ↗

Antimony: a flame fighter

Antimony is a brittle, silvery-white semimetal that conducts heat poorly. The chemical compound antimony trioxide (Sb 2 O 3 ) is widely used in plastics, rubbers, paints, and textiles, including industrial safety suits and some children’s clothing, to make them resistant to the spread of flames. Also, sodium antimonate (NaSbO 3 ) is used during manufacturing of high-quality glass, which is found in cellular phones. Humans have known about stibnite (Sb 2 S 3 ), a lead gray antimony sulfide mineral, since ancient times. Egyptians used powdered stibnite in black eye makeup to create their signature look. Pedanius Dioscorides, a 1st century A.D. Greek physician, recommended stibnite for skin ailments. French and German doctors in the 17th century prescribed antimony-containing mixtures to induce vomiting. Antimony was later recognized to be an intense skin irritant and a lethal toxin, particularly when swallowed. In the 11th century, the word antimonium was used by medieval scholar Constantinus Africanus, but antimony metal was not isolated until the 16th century by Vannoccio Biringuccio, an Italian metallurgist. In the early 18th century, chemist Jons Jakob Berzelius chose the periodic symbol for antimony (Sb) based on stibium, which is the Latin name for stibnite.

Fact Sheet↗

Assessment of undiscovered sandstone copper deposits of the Kodar-Udokan area, Russia

Mineral resource assessments integrate and synthesize available information as a basis for estimating the location, quality, and quantity of undiscovered mineral resources. This probabilistic mineral resource assessment of undiscovered sandstone copper deposits within Paleoproterozoic metasedimentary rocks of the Kodar-Udokan area in Russia is a contribution to a global assessment led by the U.S. Geological Survey (USGS). The purposes of this study are to (1) delineate permissive areas (tracts) to indicate where undiscovered sandstone-hosted copper deposits may occur within 2 km of the surface, (2) provide a database of known sandstone copper deposits and significant prospects, (3) estimate numbers of undiscovered deposits within these permissive tracts at several levels of confidence, and (4) provide probabilistic estimates of amounts of copper (Cu) and mineralized rock that could be contained in undiscovered deposits within each tract. The workshop for the assessment, held in October 2009, used a three-part form of mineral resource assessment as described by Singer (1993) and Singer and Menzie (2010). Permissive tracts were delineated by estimating the volume of rock that contains the stratigraphic section ranging from the Chitkanda to the Sakukan Formations of the Udokan Complex to a depth of 2 km and then projecting this rock volume to the surface. The six permissive tracts delineated in this assessment occur in several domains, referred to as troughs in Russian literature, which represent remnants of a much larger basin that likely covered the Kodar-Udokan region. Tracts range in size from about 100 km 2 to 800 km 2 . The mapped distributions of rocks as shown on 1:200,000-scale geologic maps, supplemented in some areas by prospect mapping and drilling, were used to delineate the tracts. In this study area, data are insufficient to constrain the original basin geometry or the structural or stratigraphic traps that would have localized copper mineralization. Some alteration is described, and the types of sandstone cements vary; however, no patterns are known that provide evidence for regional flow paths of metal-bearing brines that could localize deposits. This probabilistic assessment indicates that a significant amount of undiscovered copper is associated with sediment-hosted stratabound copper deposits in the Kodar-Udokan Trough. In the assessment, a mean of 21 undiscovered deposits is estimated to occur within the Kodar-Udokan area. There are two known deposits in the area that contain drill-identified resources of 19.6 million metric tons of copper. Using Monte Carlo simulation, probabilistic estimates of the numbers of undiscovered sandstone copper deposits for these tracts were combined with tonnage and grade distributions of sandstone copper deposits to forecast an arithmetic mean of 20.6 million metric tons of undiscovered copper. Significant value can be expected from associated metals, particularly silver.

Scientific Investigations Report↗

Sediment-hosted stratabound copper assessment of the Neoproterozoic Roan Group, central African copperbelt, Katanga Basin, Democratic Republic of the Congo and Zambia

This study estimates the location, quality, and quantity of undiscovered copper in stratabound deposits within the Neoproterozoic Roan Group of the Katanga Basin in the Democratic Republic of the Congo and Zambia. The study area encompasses the Central African Copperbelt, the greatest sediment-hosted copper-cobalt province in the world, containing 152 million metric tons of copper in greater than 80 deposits. This study (1) delineates permissive areas (tracts) where undiscovered sediment-hosted stratabound copper deposits may occur within 2 kilometers of the surface, (2) provides a database of known sediment-hosted stratabound copper deposits and prospects, (3) estimates numbers of undiscovered deposits within these permissive tracts at several levels of confidence, and (4) provides probabilistic estimates of amounts of copper and mineralized rock that could be contained in undiscovered deposits within each tract. The assessment, conducted in January 2010 using a three-part form of mineral resource assessment, indicates that a substantial amount of undiscovered copper resources might occur in sediment-hosted stratabound copper deposits within the Roan Group in the Katanga Basin. Monte Carlo simulation results that combine grade and tonnage models with estimates of undiscovered deposits indicate that the mean estimate of undiscovered copper in the study area is 168 million metric tons, which is slightly greater than the known resources at 152 million metric tons. Furthermore, significant value can be expected from associated metals, particularly cobalt. Tracts in the Democratic Republic of the Congo (DRC) have potential to contain near-surface, undiscovered deposits. Monte Carlo simulation results indicate a mean value of 37 million metric tons of undiscovered copper may be present in significant prospects.

Katanga Basin↗

Descriptive models, grade-tonnage relations, and databases for the assessment of sediment-hosted copper deposits: with emphasis on deposits in the Central Africa Copperbelt, Democratic Republic of the Congo and Zambia: Chapter J in Global mineral resource assessment

The Central African Copperbelt (CACB) is one of the most important copper-producing regions of the world. The majority of copper produced in Africa comes from this region defined by the Neoproterozoic Katanga sedimentary basin of the southern Democratic Republic of the Congo (DRC) and northern Zambia. Copper in the CACB is mined from sediment-hosted stratabound copper deposits associated with red beds and includes the giant deposits in the Kolwezi and Tenge-Fungurume districts in the DRC and the Konkola-Musoshi and Nchanga-Chingola districts in Zambia. In recent years, sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits, such as the giant Kansanshi deposit in Zambia have become important exploration targets in the CACB region. In 2011, the CACB accounted for 7.2 percent of the estimated global mine production of copper. Global production of copper is principally derived from porphyry and sediment-hosted copper deposits (57 and 23 percent, respectively). Almost 50 percent of the copper known to exist in sediment-hosted deposits (past production plus identified resources) is contained in the CACB, 25 percent is contained in the Zechstein Basin of northern Europe, and the remainder is contained in an additional 29 sedimentary basins distributed around the globe. The U.S. Geological Survey (USGS) led an assessment of undiscovered copper resources in the CACB as part of a global mineral resource assessment for undiscovered resources of potash, copper, and platinum-group elements in selected mineral deposit types. As part of the assessment process, available data for the CACB were compiled and evaluated. This report describes the results of that work, including new descriptive mineral-deposit and grade and tonnage models and spatial databases for deposits and occurrences, ore bodies and open pits. Chapter 1 of this report summarizes a descriptive model of sediment-hosted stratabound copper deposits. General characteristics and subtypes of sediment-hosted stratabound copper deposits are described based upon worldwide examples. Chapter 2 provides a global database of 170 sediment-hosted copper deposits, along with a statistical evaluation of grade and tonnage data for stratabound deposits, a comparison of stratabound deposits in the CACB with those found elsewhere, a discussion of the distinctive characteristics of the subtypes of sediment-hosted copper deposits that occur within the CACB, and guidelines for using grade and tonnage distributions for assessment of undiscovered resources in sediment-hosted stratabound deposits in the CACB. Chapter 3 presents a new descriptive model of sediment-hosted structurally controlled replacement and vein (SCRV) copper deposits with descriptions of individual deposits of this type in the CACB and elsewhere. Appendix A describes a relational database of tonnage, grade, and other information for more than 100 sediment-hosted copper deposits in the CACB. These data are used to calculate the pre-mining mineral endowment for individual deposits in the CACB and serve as the basis for the grade and tonnage models presented in chapter 2. Appendix B describes three spatial databases (Esri shapefiles) for (1) point locations of more than 500 sediment-hosted copper deposits and prospects, (2) projected surface extent of 86 selected copper ore bodies, and (3) areal extent of 77 open pits, all within the CACB.

Scientific Investigations Report↗