Geology Reports⌕ Search

Geology topics

Nicholas M. Ratcliffe

Publications and source records attributed to Nicholas M. Ratcliffe.

At least 19 recordsLinked to original sources
USGS2020

Bedrock geologic map of the Springfield 7.5- x 15-minute quadrangle, Windsor County, Vermont, and Sullivan County, New Hampshire

The bedrock geology of the 7.5- by 15-minute Springfield quadrangle consists of highly deformed and metamorphosed Mesoproterozoic through Devonian metasedimentary and meta-igneous rocks. In the west, Mesoproterozoic gneisses of the Mount Holly Complex are the oldest rocks and form the eastern side of the Chester dome. The Moretown slice structurally overlies the Chester dome along the Keyes Mountain thrust fault which represents the Ordovician Taconic suture (Red Indian Line) between Laurentian and Ganderian crust. The allochthonous Cambrian through Ordovician Moretown slice includes the Moretown and Cram Hill Formations and the North River Igneous Suite. Silurian and Devonian metasedimentary and metavolcanic rocks of the Connecticut Valley trough (CVT) unconformably overlie the Moretown slice. Ordovician to Silurian and Devonian metasedimentary and meta-igneous rocks of the New Hampshire sequence structurally overlie the CVT along the Devonian, Acadian Monroe thrust fault. The oldest part of the New Hampshire sequence consists of Ordovician metamorphosed volcanic, plutonic, and sedimentary rocks of the Bronson Hill arc including the Ammonoosuc Volcanics, the Partridge Formation, and the Oliverian Plutonic Suite. The Ammonoosuc Volcanics are the base of the exposed arc section in the map area. The Bronson Hill arc rocks are exposed in fault-bounded structural belts, including the Monroe thrust sheet, the Claremont belt, the Sugar River and Unity domes, and the footwall of the Brennan Hill thrust fault. Silurian to Devonian metasedimentary rocks of the Clough Quartzite, and Fitch and Littleton Formations unconformably overlie the Bronson Hill arc rocks. Devonian granitic and pegmatitic dikes and sills of the New Hampshire Plutonic Suite intruded previously deformed rocks. Devonian, Acadian F 1 fold nappes have a sheath fold geometry and are truncated by multiple generations of faults. The Bronson Hill arc structurally overlies the CVT along the Acadian Monroe fault with preserved tectonic mélange in the footwall. Upright dome-stage F 2 folds post-date amphibolite facies metamorphism and locally developed into sheath folds in high-strain zones. F 3 folds exhibit sinistral rotation associated with Alleghanian lower-greenschist facies faults. Late Paleozoic Alleghanian to Mesozoic shear zones transpose stratigraphy, early structures, and peak metamorphic isograds. 40 Ar/ 39 Ar white-mica growth ages (300–250 million years before present [Ma]) indicate that retrograde deformation continued into the latest Paleozoic and earliest Mesozoic. Apatite fission track data show that brittle faults were active prior to about 100 Ma and experienced Late Cretaceous and even Paleocene re-activation. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing characterization of the bedrock of Vermont and New Hampshire. This Scientific Investigations Map of the Springfield 7.5- x 15-minute quadrangle consists of sheets 1 and 2 as well as a geographic information system (GIS) database that includes bedrock geologic units, faults, outcrops, and structural geologic information. Sheet 1 of the report includes a bedrock geologic map, a correlation of map units, and a description of map units. Sheet 2 includes a discussion of the geology, references cited, two cross sections from the geologic map on sheet 1, a tectonic map showing major structural features, and a structural domain map showing the orientation of brittle features.

New Hampshire, Vermont↗
USGS2020

Bedrock geologic map of the Mount Ascutney 7.5- x 15-minute quadrangle, Windsor County, Vermont, and Sullivan County, New Hampshire

The bedrock geology of the Mount Ascutney 7.5- x 15-minute quadrangle consists of highly deformed and metamorphosed Mesoproterozoic through Devonian metasedimentary and meta-igneous rocks intruded by rocks of the Mesozoic White Mountain Igneous Suite. In the west, Mesoproterozoic gneisses of the Mount Holly Complex are the oldest rocks and form the northeastern flank of the Chester dome. The allochthonous Cambrian through Ordovician rocks include the Moretown and Cram Hill Formations and the North River Igneous Suite; these rocks structurally overlie the Chester dome along the Keyes Mountain thrust fault. Silurian and Devonian metasedimentary and metavolcanic rocks of the Connecticut Valley trough (CVT) unconformably overlie the pre-Silurian rocks. The easternmost extent of the CVT in New Hampshire is exposed in the Meriden antiform. Ordovician to Silurian and Devonian metasedimentary rocks of the Bronson Hill anticlinorium structurally overlie the CVT along the Monroe thrust fault. The oldest part of the Bronson Hill anticlinorium, called the Bronson Hill arc, consists of Ordovician metamorphosed volcanic, plutonic, and sedimentary rocks of the Ammonoosuc Volcanics, the Partridge Formation, and the Oliverian Plutonic Suite. The rocks of the Bronson Hill arc may be partly correlative with the pre-Silurian rocks above the Chester dome and are exposed in two fault-bounded structural belts (Cornish City and Claremont belts) and in the Sugar River dome. Collectively, these belts form the regional Orfordville anticlinorium, Hardscrabble synclinorium, and the western part of the broader Bronson Hill anticlinorium in western New Hampshire. Silurian to Devonian metasedimentary rocks of the Clough Quartzite, and Fitch and Littleton Formations unconformably overlie the rocks of the Bronson Hill arc. Devonian granitic and pegmatitic dikes and sills of the New Hampshire Plutonic Suite intruded previously deformed rocks. Post-tectonic Cretaceous plutonic and volcanic rocks of the Ascutney Mountain Intrusive Complex underlie Mount Ascutney. Because of the historically significant scientific research, and its prominence in the landscape, Mount Ascutney is commonly regarded as Vermont’s most famous volcano. The bedrock geology was mapped to study the tectonic history of the area and to provide a framework for ongoing characterization of the bedrock of Vermont and New Hampshire. This Scientific Investigations Map of the Mount Ascutney 7.5- x 15-minute quadrangle consists of sheets 1 and 2 as well as a geographic information system (GIS) database that includes bedrock geologic units, faults, outcrops, structural geologic information, geochemistry, and photographs. Sheet 1 of the report includes a bedrock geologic map, a correlation of map units, and a description of map units. Sheet 2 includes a discussion of the geology, references, three cross sections from the geologic map on sheet 1, igneous rock geochemistry results of the main map units from the Mount Ascutney stock, a tectonic map showing major structural features, and a structural domain map showing the orientation and distribution of brittle features.

New Hampshire, Vermont↗
USGS2011

Provisional zircon and monazite uranium-lead geochronology for selected rocks from Vermont

This report presents the results of zircon and monazite uranium-lead (U-Pb) geochronologic analyses of 24 rock samples. The samples in this study were collected from mapped exposures identified while conducting either new, detailed (1:24,000-scale) geologic quadrangle mapping or reconnaissance mapping, both of which were used for compilation of the bedrock geologic map of Vermont. All of the collected samples were judged to be igneous rocks (either intrusive or extrusive) on the basis of field relations and geochemistry. The one exception is the Okemo Quartzite on Ludlow Mountain. These geochronologic data were used to supplement regional correlations between igneous suites on the basis of similar geochemistry and geologic mapping.

Open-File Report↗
USGS2011

Bedrock geologic map of Vermont

The Bedrock Geologic Map of Vermont is the result of a cooperative agreement between the U.S. Geological Survey (USGS) and the State of Vermont. The State's complex geology spans 1.4 billion years of Earth's history. The new map comes 50 years after the most recent map of the State by Charles G. Doll and others in 1961 and a full 150 years since the publication of the first geologic map of Vermont by Edward Hitchcock and others in 1861. At a scale of 1:100,000, the map shows an uncommon level of detail for State geologic maps. Mapped rock units are primarily based on lithology, or rock type, to facilitate derivative studies in multiple disciplines. The 1961 map was compiled from 1:62,500-scale or smaller maps. The current map was created to integrate more detailed (1:12,000- to 1:24,000-scale) modern and older (1:62,500-scale) mapping with the theory of plate tectonics to provide a framework for geologic, tectonic, economic, hydrogeologic, and environmental characterization of the bedrock of Vermont. The printed map consists of three oversize sheets (52 x 76 inches). Sheets 1 and 2 show the southern and northern halves of Vermont, respectively, and can be trimmed and joined so that the entire State can be displayed as a single entity. These sheets also include 10 cross sections and a geologic structure map. Sheet 3 on the front consists of descriptions of 486 map units, a correlation of map units, and references cited. Sheet 3 on the back features a list of the 195 sources of geologic map data keyed to an index map of 7.5-minute quadrangles in Vermont, as well as a table identifying ages of rocks dated by uranium-lead zircon geochronology.

Vermont↗
USGS2011

Hydrogeology and simulation of groundwater flow in fractured rock in the Newark basin, Rockland County, New York

Groundwater in the Newark basin aquifer flows primarily through discrete water-bearing zones parallel to the strike and dip of bedding, whereas flow perpendicular to the strike is restricted, thereby imparting anisotropy to the groundwater flow field. The finite-element model SUTRA was used to represent bedrock structure in the aquifer by spatially varying the orientation of the hydraulic conductivity tensor to reflect variations in the strike and dip of the bedding. Directions of maximum and medium hydraulic conductivity were oriented parallel to the bedding, and the direction of minimum hydraulic conductivity was oriented perpendicular to the bedding. Groundwater flow models were prepared to simulate local flow in the vicinity of the Spring Valley well field and regional flow through the Newark basin aquifer. The Newark basin contains sedimentary rocks deposited as alluvium during the Late Triassic and is one of a series of basins that developed when Mesozoic rifting of the super continent Pangea created the Atlantic Ocean. The westward-dipping basin is filled with interbedded facies of coarse-grained to fine-grained rocks that were intruded by diabase associated with Jurassic volcanism. The Newark basin aquifer is bounded to the north and east by the Palisades sill and to the west by the Ramapo Fault. Although the general dip of bedding is toward the fault, mapping of conglomerate beds indicates the rocks are folded into broad anticlines and synclines. An alternative, more uniform pattern of regional structure, based on interpolated strike and dip measurements from a number of sources, has also been proposed. Two groundwater flow models (A for the former type of bedrock structure and B for the latter type) were developed to represent these alternative depictions of bedrock structure. Transient simulations were calibrated to reproduce measured water-level recoveries in a 9.3 mi&sup2 area surrounding the Spring Valley well field during a 5-day aquifer test in 1992. The models represented a 330-ft thick rock mass divided vertically into 10 equally spaced layers and were calibrated through nonlinear regression. Results of model B best matched the observed water-level recoveries with an estimated hydraulic conductivity of 9.5 ft/day, specific storage of 7.6 x 10 -6 ft -1, and K max : K min anisotropy ratio (hydraulic conductivity parallel to bedding: perpendicular to bedding) of 72:1. Model error was 50 percent greater in model A because the assumed structure did not match the actual strike of bedding in this area. Steady-state simulations of regional flow through the 85.4-mi2 modeled extent of the Newark basin aquifer represented both the alluvial aquifer beneath the Mawah River and the fractured bedrock. The rock mass was divided into two aquifer units: an upper 500-ft thick unit divided into 10 equally spaced layers through which most groundwater is assumed to flow and a lower unit divided into 7 layers with increasing thickness. Models were calibrated through nonlinear regression to average water levels measured in 140 wells from August 2005 through April 2007. Water levels simulated using the two models were similar and generally matched those observed, and the average recharge rate estimated using both models was 19 inches/year for the simulated period. Estimated transmissivity parallel to the strike of bedding (1,100 ft&sup2/d) was uniform in two transmissivity (T) zones in model A, but in model B the transmissivity of a high T zone (1,600 ft&sup2/d), delineated on the basis of aquifer test data, was slightly greater than in a low T zone (1,300 ft&sup2/d). The K max : K min anisotropy was estimated to be 58:1 in model A and 410:1 in model B, so the proportion of flow perpendicular to bedding is less in model B than in model A. Distributions of groundwater age simulated with models A and B are similar and indicate that most shallow ground-water (225 ft below the bedrock surface) is 5 t

Scientific Investigations Report↗
USGS1998

Interpretation of ages of arc magmatism, metamorphism, and collisional tectonics in the Taconian orogen of western New England

Available geochronologic ages of volcanic and intrusive rocks of the Taconian arc complex of western New England suggest that the Shelburne Falls and Bronson Hill arcs are not temporally or spatially discrete. Arc activity ranges from earliest Ordovician to Silurian. Activity in the Early and Middle Ordovician coincided with outboard accretionary tectonics and metamorphism that was contemporaneous with the older igneous activity in the Shelburne Falls arc and Bronson Hill arcs. Activity at about 455 to 445 Ma coincides with the collisional stage of the Taconian orogeny that affected Caradocian and older rocks of the Laurentian margin. The 455 to 445 Ma range for the collisional stage of Taconian orogeny in western New England is bracketed by biostratigraphic ages of sedimentary rocks formed on the Laurentian margin and 40Ar/39Ar ages of prograde hornblende formed during Taconian metamorphism. The previous 40Ar/39Ar age estimate of 465 Ma for this collisional and metamorphic event is now known to be too old because this age violates the age of metasedimentary rocks involved in the collisional tectonics. Acceptance of the newer 40Ar/39Ar age estimates of 445 to 450 Ma for Taconian metamorphism during collision establishes the contemporaneity with arc activity in the Bronson Hill arc. Taken together these data support the concept of a long-lived volcanic arc terrane(s) that prograded oceanward. Collision with this time-composite arc terrane(s) in the Caradocian produced the Taconian orogeny rather than the collision of a separate and smaller arc called the "Shelburne Falls arc" by Karabinos and others (1998).

American Journal of Science↗