Geology topics

Nadine G. Reitman

Publications and source records attributed to Nadine G. Reitman.

At least 19 recordsLinked to original sources

USGS2026

How to determine an earthquake rate budget? A comparison of geodetic, geologic, and seismologic moment rates

How much tectonic geodetic strain is accommodated as earthquakes? Can estimates of tectonic geodetic strain be used in probabilistic seismic hazard analyses? Understanding the balance of moment accumulation (i.e., geodetic moment) and accommodation (i.e., geologic and seismologic moment) is a necessary step toward leveraging corrected geodetic strain rates to quantify earthquake budgets. We investigate these questions using updated geodetic, geologic, and seismologic datasets compiled for the western United States (WUS) portion of the 2023 U.S. National Seismic Hazard Model (NSHM23‐WUS) to provide new views of moment rates across the WUS. We compare moment rates using a floating footprint approach across the extent of the NSHM23‐WUS fault sections database. We make these comparisons using “moment rate deviation (MRD),” which is defined as a surplus or deficit of geodetic moment rate relative to the sum of geologic and seismologic moment rates. We find that, in general, higher strain rate areas of the WUS (i.e., plate boundary) have smaller values of MRD, meaning that geodetic moment rates approximate the earthquake record preserved by geologic and seismologic moment rates well. In contrast, the lower strain rate, eastern portions of our analysis domain (i.e., intraplate) have very high values of MRD, with geodetic moment rates exceeding measured geologic and seismologic moment rates. We find that geodetic moment rates appear to be representative of the earthquake budget in relatively well‐characterized, interplate regions, and geodetic estimates of off‐fault deformation could be considered in seismic hazard analyses where MRD is minimized.

western United States↗

USGS2026

High‐resolution surface deformation and slip distribution observations for the 2023 Kahramanmaraş, Türkiye, earthquake sequence help constrain the rupture process

Splay, or branch, faults are a common geometric feature of earthquake surface ruptures and may provide constraints on the rupture behavior of an earthquake. The 2023 M w 7.8 Pazarcık and M w 7.5 Elbistan, Türkiye, earthquakes are examples of ruptures with multiple small splays, and the Pazarcık earthquake nucleated on a splay fault, the Narlı fault, before rupturing bilaterally on the East Anatolian fault (EAF). Here, we present 3‐m‐resolution surface displacement from subpixel correlation of Planet Dove optical images for the entirety of both ruptures with corresponding surface slip distributions. For a 30‐km‐long study region spanning the Narlı‐EAF intersection, we compare surface slip derived from five data sets with different resolutions (on‐the‐ground, WorldView, Planet Dove, Sentinel‐2, and Sentinel‐1) to elucidate complementary information. In addition, we integrate information from the surface expression of faulting with published dynamic rupture simulations and rupture process studies to constrain a rupture evolution for the Pazarcık earthquake that is consistent across data sets. This work highlights the complementary nature of disparate surface slip data sets and the role that high‐resolution surface displacement information, including from fault splays, can play in constraining nonunique rupture models and refining understanding of the earthquake rupture process.

Bulletin of the Seismological Society of America↗

USGS2026

Surface rupture and slip distribution of the 2025 Mw7.7 Mandalay earthquake and updated length scaling of supershear earthquakes

The 2025 M w 7.7 Mandalay, Burma (Myanmar), earthquake ruptured 475 km of the central Sagaing fault and is the longest continental strike-slip rupture on record. The observed rupture length is 1.6–4.7 times the value expected (100–300 km) from existing length-magnitude scaling relations for strike-slip earthquakes. The earthquake resulted from shallow dextral faulting and ruptured bilaterally with supershear speeds south of the epicenter, rupturing close to three major cities in Myanmar and exposing over six million people to violent or extreme shaking. We report on the surface rupture character, length, and slip distribution based on sub-pixel correlation of Sentinel-2 (10 m) and Planet Dove (3 m) optical images and visual analysis of SkySat and WorldView (0.3–0.5 m) optical images. The earthquake had moderate surface slip (average = 3.3 m, maximum = 5.6 m, 25–75% range = 3.0–4.0 m), narrow deformation zone width (1–10 pixels in sub-pixel correlation and up to 190 meters for the detailed surface rupture mapping), and simple fault geometry (no stepovers or large changes in strike, 87% of the rupture that was mapped in detail is single-stranded). We attribute the extreme length of the Mandalay earthquake to supershear rupture speed, simple fault geometry, narrow down-dip width, and moderate surface slip. Based on a compilation of 25 supershear strike-slip earthquakes ( M w 6.5–8.6; 1979–2025), we find that the rupture length of supershear earthquakes does not fit empirical scaling relationships for strike-slip earthquakes that predict length from magnitude. A length-magnitude scaling relationship based on supershear earthquakes has a best fit of log 10 (surface rupture length) = 0.89 M w – 4.44, indicating that supershear earthquakes tend to be longer than their subshear counterparts for any given magnitude and thus may expose a greater population to shaking.

Mandalay↗

USGS2026

Earthquake rupture arrest from depth‐dependent frictional stability on the Pütürge segment of the East Anatolian Fault Zone, Türkiye (Turkey)

Determining why earthquake ruptures stop is a central challenge in earthquake science and seismic hazard assessment. The Pütürge segment of the East Anatolian Fault Zone, Türkiye, exhibits shallow creep (<∼3 km depth) yet hosts M > 6.5 earthquake ruptures at greater depth. Here, we evaluate whether variations in frictional stability along this segment aided arrest of the 2020 M 6.7 Elaziğ and 2023 M 7.8 Pazarcık earthquake ruptures. Analysis of Sentinel‐1 Synthetic Aperture Radar imagery indicates the 2023 M 7.8 rupture propagated laterally into a metamorphic massif within the Pütürge segment, where slip rapidly decayed below detection limits. Creepmeters along this segment recorded no significant surface afterslip (<3 mm) in the following year. To investigate this fault‐slip behavior, we conducted triaxial friction experiments on Pütürge fault gouge sampled from an outcrop exposure. The gouge, composed primarily of muscovite, quartz, and calcite, is velocity strengthening at conditions approximating 0–2.5 km depth and velocity weakening at 4–5 km depth. This transition to velocity‐weakening friction is associated with enhanced comminution and shear localization observed microstructurally. Our results suggest that depth‐dependent frictional stability of the Pütürge fault segment facilitates rupture nucleation and propagation at depth while maintaining rupture‐arresting behavior near Earth’s surface.

Pütürge segment of the East Anatolian Fault Zone↗

USGS2025

Effect of land cover type on 3D deformation recovery from synthetically deformed high-resolution satellite optical imagery

The limits of detection for earthquake surface deformation in the spatial domain have improved with advances in remote sensing imagery data availability, resolution, and analysis. Sub-pixel correlation and digital elevation model (DEM) differencing from sub-meter, earthquake-spanning satellite optical imagery has enhanced surface rupture mapping and deformation measurements. However, knowledge of measurement accuracy and uncertainty is limited. To address this, we construct orthophotos and digital elevation models (DEMs) from repeat high resolution (∼0.5 m) satellite optical imagery along two sections of the Garlock fault, California with clear fault geomorphology and differing land cover. We deform later sets of DEMs and images with synthetic earthquakes containing both diffuse and discrete horizontal and vertical displacements. Sub-pixel image correlation and DEM differencing demonstrate how vegetation degrades recovered displacement accuracy. In barren land cover, horizontal displacements are detectable to an expected ∼1/10th-pixel size. With shrubs, trees, and grass, detectable displacements increase to >1/2-pixel size, and filtering results by correlation score and using elevation values as input rather than image values improves accuracy. Vertical displacement detection thresholds remain lower in vegetation, at >1-pixel size. Higher slope angles degrade displacement recovery, worsened by vegetation. Diminishing seasonal separation improves accuracy over vegetated regions, though not to the level achieved in barren environments. These results will inform research and operational efforts on the utility of high resolution satellite optical imagery for detecting deformation in varied land cover. Furthermore, they reveal where alternative measurements, such as from LiDAR or radar interferometry, are required to mitigate the effects of vegetation and capture fine-scale crustal deformation.

California↗

USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗

USGS2025

Timescales of surface faulting preservation in low-strain intraplate regions from landscape evolution modeling and the geomorphic and historical record

Large surface-rupturing intraplate earthquakes in stable continental regions (SCRs) are uncommon globally and have recurrence intervals of thousands to hundreds of thousands of years based on the paleoseismic and geomorphic record, challenging accurate active fault identification in these regions. To constrain the timescales of preservation for scarps created by surface ruptures from dip-slip earthquakes, we use a two-dimensional scarp diffusion model for typical intraplate settings and explore which parameters influence fault scarp preservation. These parameters include the coseismic vertical surface offset, the recurrence interval of similar magnitude earthquakes, diffusivity (as a proxy for mean annual precipitation rate), and the erodibility of the surficial material. We constrain parameter ranges from a compilation of historical surface ruptures in intraplate settings in a variety of climates, including the Central and Eastern United States, Australia, Europe, Central Asia (Mongolia, China), India, and West Africa. The timescales of scarp preservation from landscape evolution modeling agree well with observations of scarp preservation in low-strain SCR and intraplate tectonic settings, with some notable exceptions for Australian scarps. We find that the erodibility of the surficial material and earthquake recurrence interval have a stronger effect on the timescales of scarp preservation than diffusivity or coseismic vertical surface offset. Our model results may aid in identifying and characterizing subtle, slow-moving active faults in low-strain SCR and intraplate tectonic settings for different tectonic, geomorphic, and climatic characteristics. Accurate fault locations and characterization from the landscape record has implications for both probabilistic seismic and fault displacement hazard analyses.

Journal of Geophysical Research Solid Earth↗

USGS2025

Ultralong, supershear rupture of the 2025 Mw 7.7 Mandalay earthquake reveals unaccounted risk

The 28 March 2025 moment magnitude ( M w ) 7.7 earthquake in Mandalay, Burma (Myanmar), ruptured 475 kilometers of the Sagaing Fault, which was more than twice the length predicted by magnitude scaling relationships. Kinematic slip models and observation of a Rayleigh Mach wave that passed through parts of Thailand confirmed that rupture occurred at supershear velocities of greater than 5 kilometers per second. The anomalous length exposed a vast population to violent near-fault shaking. The Mandalay earthquake is a modern analog for the M w 7.9 1906 San Francisco earthquake, another atypically long and fast rupture. Probabilistic seismic hazard analyses use scaling relations that do not account for such long ruptures at moderate magnitudes. This limitation, in conjunction with a likely increased population and infrastructure exposure for atypically long ruptures, contributes to a potential mischaracterization of seismic risk.

Mandalay↗

USGS2024

Limited preservation of strike-slip surface displacement in the geomorphic record

Offset geomorphic markers are commonly used to interpret slip history of strike-slip faults and have played an important role in forming earthquake recurrence models. These data sets are typically analyzed using cumulative probability methods to interpret average amounts of slip in past earthquakes. However, interpretation of the geomorphic record to infer surface slip history is complicated by slip variability, measurement uncertainty, and modification of offset features in the landscape. To investigate how well geomorphic data record surface slip, we use offset measurements from recent strike-slip surface ruptures ( n = 39), faults with geomorphic evidence of multiple strike-slip earthquakes ( n = 29), and synthetic slip distributions with added noise ( n > 10,000) to examine the constraints of the geomorphic record and the underlying assumptions of the cumulative offset probability distribution analysis method. We find that the geomorphic record is unlikely to resolve more than two paleo-slip distributions, except in specific cases with low slip variability, high slip-per-event, and semiarid climate. In cases where site-specific conditions allow for interpretation of more than two earthquakes, lateral extrapolation along a fault is not straightforward because on-fault displacement and distributed deformation may be spatially variable in each earthquake. We also find that average slip in modern earthquakes is adequately recovered by probability methods, but the reported prevalence of strike-slip faults with characteristic slip history is not supported by geomorphic data. We also propose updated methods to interpret slip history and construct uncertainty bounds for paleo-slip distributions.

Journal of Geophysical Research: Solid Earth↗

USGS2024

Are field observations of surface rupture useful? An example from the 2023 Mw 7.8 Pazarcık, Turkey (Türkiye), earthquake

Field investigations have long been an important component of the scientific response to surface‐faulting earthquakes. However, in light of advances in remote data and models, the question arises whether field‐based observations of surface rupture remain useful for understanding rupture processes and seismic hazards. We approach this question using a field‐based study of the central 2023 M w 7.8 Pazarcık, Turkey (Türkiye), earthquake rupture, at the intersection of the east Anatolian fault (EAF) and Narlı fault. Our field observations include the surface rupture expression and extent of the central EAF and northernmost Narlı fault in generally forested and steep terrain and 68 measurements of left‐lateral surface displacement. These data improve our understanding of the Pazarcık rupture complexity, resolve the surface geometry of the Narlı fault–EAF connection, and exhibit a clear (>2 m) change in surface displacement across this intersection zone that confirms remote‐based coseismic slip models. Our study shows that focusing field efforts in areas of obscured or low‐resolution remote data can yield essential data for refining rupture extent, documenting perishable on‐fault displacement, and improving postearthquake situational awareness. A comparison of similarly large‐magnitude continental surface‐rupturing earthquakes indicates that displacement uncertainties relate to a complex set of factors, including measurement methods, rupture complexity, and displacement magnitude. Our study validates the need for postearthquake field observations, which, when driven by clear motivating questions and knowledge of methodological strengths and limitations, provide high‐resolution rupture data that complement remote‐based models.

Pazarcık↗

USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗

USGS2024

Unlearning Racism in Geoscience (URGE): Summary of U.S. Geological Survey URGE pod deliverables

The U.S. Geological Survey (USGS) is in a unique position to be a leader in diversity, equity, inclusion, and accessibility in the Earth sciences. As one of the largest geoscience employers, the USGS wields significant community influence and has a responsibility to adopt and implement robust, unbiased policies so that the science it is charged to deliver is better connected to the diverse communities it serves. Meaningful and effective improvements in implementation of diversity, equity, inclusion, and accessibility principles made within the USGS will be seen across the geoscience community. Despite this opportunity, however, the community, including the USGS, has struggled to diversify the geoscience workforce, which does not reflect the Nation’s diversity. This disparity suggests that the implementation of past policies did not achieve their desired outcomes in sustainable ways. The persistent lack of diversity across the geosciences and the racial justice protests of 2020 motivated a group of geoscience scholars to launch a global, virtual initiative known as Unlearning Racism in Geoscience (URGE) in the winter of 2021. The 16-week facilitated URGE curriculum was designed to highlight existing literature, share expert opinions, and foster discussion within groups (pods) around the world to build action plans for affecting change within their home institutions ( https://urgeoscience.org/ ). Whereas most of the approximately 4,500 participants were university faculty and students or from professional societies and nonprofit organizations, 6 pods totaling over 120 participants from the USGS joined the program—the largest participation of any Federal science agency. Summarizing the recommendations of over 100 USGS employees across the USGS who participated in URGE, this Circular represents a grassroots plan for making the USGS workforce more diverse and inclusive. To identify how peer-reviewed best practices could be implemented at the USGS, participants read existing literature, reviewed USGS policies and procedures, explored new and existing demographic data, and listened to and discussed primary interviews with scholars, all facilitated by the URGE program. This Circular leverages the efforts and momentum of the USGS URGE participants to catalyze and support positive, systemic change throughout the organization in a holistic way that represents an achievable departure from past policies that fell short of success. These recommendations are starting points. Reflecting the overall lack of diversity in the USGS workforce, the USGS URGE participants were predominantly White, meaning recommendations in this document can and should continue to evolve to include the lived perspectives and input from the broader USGS community. Finally, this summary document only highlights some of the key findings of these working groups. Additional details that may be more suitable to specific USGS Centers and programs can be found in the primary documents developed by each USGS URGE pod; a list of all registered pods can be found at https://urgeoscience.org/pods/ .

Circular↗

USGS2024

Paleoseismology of the Sawtooth fault and implications for fault behavior in the epicentral region of the 2020 Mw 6.5 Stanley, Idaho, earthquake

The 2020 moment magnitude ( M w ⁠⁠ ) 6.5 Stanley, Idaho, earthquake raised questions about the history and extent of complex faulting in the northwestern Centennial Tectonic Belt (CTB) and its relation to the Sawtooth normal fault and Eocene Trans‐Challis fault system (TCFS). To explore faulting in this area, we excavated a paleoseismic trench across the Sawtooth fault along the western margin of the CTB, and compared an early Holocene (9.1 ± 2.1 ka, 1δ ⁠ ) rupture at the site with lacustrine paleoseismic data and fault mapping in the 2020 epicentral region. We find: (1) a history of partial to full rupture of the Sawtooth fault ( M w ⁠ 6.8–7.4), (2) that shorter ruptures ( M w ≤ ⁠⁠6.9 ) are likely along distributed and discontinuous faults in the epicentral region, (3) that this complex system that hosted the 2020 earthquake is not directly linked to the Sawtooth fault, (4) that the northeast‐trending TCFS likely plays a role in controlling fault length and rupture continuity for adjacent faults, and (5) that parts of the TCFS may facilitate displacement transfer between normal faults that accommodate crustal extension and rotation. Our results help unravel complex faulting in the CTB and imply that relict structures can help inform regional seismic hazard assessments.

Idaho↗

USGS2023

Rapid surface rupture mapping from satellite data: The 2023 Kahramanmaraş, Turkey (Türkiye), earthquake sequence

The 6 February 2023 Kahramanmaraş, Turkey (Türkiye), earthquake sequence produced > 500 km of surface rupture primarily on the left‐lateral East Anatolian (~345 km) and Çardak (~175 km) faults. Constraining the length and magnitude of surface displacement on the causative faults is critical for loss estimates, recovery efforts, rapid identification of impacted infrastructure, and fault displacement hazard analysis. To support these efforts, we rapidly mapped the surface rupture from satellite data with support from remote sensing and field teams, and released the results to the public in near‐real time. Detailed surface rupture mapping commenced on 7 February and continued as high‐resolution (< 1.0 m/pixel) optical images from WorldView satellites (2023 Maxar) became available. We interpreted the initial simplified rupture trace from subpixel offset fields derived from Advanced Land Observation Satellite2 and Sentinel‐1A synthetic aperture radar image pairs available on 8 and 10 February, respectively. The mapping was released publicly on 10 February, with frequent updates, and published in final form four months postearthquake ( Reitman, Briggs, et al. , 2023 ). This publicly available, rapid mapping helped guide fieldwork and constrained U.S. Geological Survey finite‐fault and loss estimate models, as well as stress change estimates and dynamic rupture models.

Kahramanmaraş↗

USGS2023

Rapid characterization of the February 2023 Kahramanmaraş, Turkey, earthquake sequence

The 6 February 2023 M w "> M w 7.8 Pazarcık and subsequent M w "> M w 7.5 Elbistan earthquakes generated strong ground shaking that resulted in catastrophic human and economic loss across south‐central Türkiye and northwest Syria. The rapid characterization of the earthquakes, including their location, size, fault geometries, and slip kinematics, is critical to estimate the impact of significant seismic events. The U.S. Geological Survey National Earthquake Information Center (NEIC) provides real‐time monitoring of earthquakes globally, including rapid source characterization and impact estimates. Here, we describe the seismic characterization products generated and made available by the NEIC over the two weeks following the start of the earthquake sequence in southeast Türkiye, their evolution, and how they inform our understanding of regional seismotectonics and hazards. The kinematics of rupture for the two earthquakes was complex, involving multiple fault segments. Therefore, incorporating observations from rupture mapping was critical for characterizing these events. Dense local datasets facilitated robust source characterization and impact assessment once these observations were obtained and converted to NEIC product input formats. We discuss how we may improve the timeliness of NEIC products for rapid assessment of future seismic hazards, particularly in the case of complex ruptures.

The Seismic Record↗

USGS2022

Climatic influence on the expression of strike-slip faulting

Earthquakes on strike-slip faults are preserved in the geomorphic record by offset landforms that span a range of displacements, from small offsets created in the most recent earthquake (MRE) to large offsets that record cumulative slip from multiple prior events. An exponential decay in the number of large cumulative offsets has been observed on many faults, and a leading hypothesis is that climate controls the rate of decay. We present offset measurements compiled from 31 studies of strike-slip faults with evidence of multiple paleoearthquakes and corresponding climatic and tectonic information to test this hypothesis. Both the global compilation and numerical landscape evolution modeling reveal that the decay rate in large offsets is negatively correlated with mean annual precipitation. Faults in dry regions with high drainage density more commonly preserve small MRE offsets, and faults in wet regions with lower drainage density more commonly preserve a mix of small MRE and large cumulative offsets. Geomorphology of faults in different climates supports this result and illustrates precipitation’s effect on the development and preservation of offset channels. Our findings imply that current and past climate affect how displacement on strike-slip faults is recorded and interpreted to inform earthquake history.

Geology↗

USGS2022

Revised earthquake geology inputs for the central and eastern United States and southeast Canada for the 2023 National Seismic Hazard Model

It has been nearly a decade since updates to seismic and fault sources in the central and eastern United States (CEUS) were last assessed for the 2012 Central and Eastern United States Seismic Source Characterization for nuclear facilities (CEUS-SSCn) and 2014 United States Geological Survey National Seismic Hazard Model (NSHM) for the conterminous U.S. In advance of the 2023 NSHM update, we created 3 related geospatial databases to summarize and characterize new fault source information for the CEUS. These include fault section, fault-zone polygon, and earthquake geology (fault slip rate, earthquake recurrence intervals) databases which document updates to fault parameters used in prior seismic hazard models in this region. The 2012 CEUS-SSCn and 2014 NSHM fault models served as a foundation, as we revised and added fault sources where new published studies documented significant changes to our understanding of fault location, geometry, or activity. We added 9 new fault sections that meet the criteria of (1) a length ≥7 km, (2) evidence of recurrent Quaternary tectonic activity, and (3) documentation that is publicly available in a peer-reviewed source. The prior CEUS models only included 6 fault sections (sources) and 10 fault-zone polygons (previously called repeating large magnitude earthquake (RLME) polygons). The revised databases include 15 fault sections and 10 fault zone polygons. Updates to the faults constitute a 150% increase in fault sections, but no change in the number of fault-zone polygons, although some fault-zone polygons differ from RLME polygons used in prior models. No faults were removed from past models. Several seismic zones and suspected faults were evaluated but not included in this update due to a lack of information about fault location, geometry, or recurrent Quaternary activity. These updates to the fault sections, fault-zone polygons, and earthquake geology databases will inform fault geometry and activity rates of CEUS sources during the 2023 NSHM implementation.

Seismological Research Letters↗

USGS2022

Western U.S. geologic deformation model for use in the U.S. National Seismic Hazard Model 2023

Fault geometry and slip rates are key input data for geologic deformation models, which are a fundamental component of probabilistic seismic hazard analyses (PSHAs). However, geologic sources for PSHA have traditionally been limited to faults with field‐based slip rate constraints, which results in underrepresentation of known, but partially characterized, active faults. Here, we evaluate fault geometries and geologic fault slip rates for the western United States to construct a new geologic deformation model for the U.S. National Seismic Hazard Model 2023 update (NSHM23). In previous NSHM iterations, only faults with published geologic slip rates were included. In the NSHM23 fault sections database compilation, this inclusion criterion was expanded to include faults without known slip rates. In this updated geologic deformation model, preferred slip rates and associated uncertainty distributions are incorporated for faults with slip rates derived from field studies. For faults without site‐specific slip rates, we evaluate a suite of uncertainty distributions derived from broad slip rate categories in the U.S. Geological Survey Quaternary Fault and Fold Database. Preferred slip rate distributions are selected via comparison with geodetic strain rates in tectonic subregions. The resultant moment of the geologic deformation model is generally in deficit compared with the geodetic moment within each region. Primary advances in the NSHM23 geologic deformation model include the following: (1) slip rates are presented as preferred values with uncertainties rather than single values; (2) the representation of the western U.S. active fault network is more complete; and (3) the geologic deformation model leverages geodetic information to assess regional constraints on geologic fault slip rates.

Seismological Research Letters↗