Geology topics

Mike R. James

Publications and source records attributed to Mike R. James.

4 recordsLinked to original sources

USGS2020

Volcanological applications of unoccupied aircraft systems (UAS): Developments, strategies, and future challenges

Unoccupied aircraft systems (UAS) are developing into fundamental tools for tackling the grand challenges in volcanology; here, we review the systems used and their diverse applications. UAS can typically provide image and topographic data at two orders of magnitude better spatial resolution than space-based remote sensing, and close-range observations at temporal resolutions down to those of video frame rates. Responsive deployments facilitate dense time-series measurements, unique opportunities for geophysical surveys, sample collection from hostile environments such as volcanic plumes and crater lakes, and emergency deployment of ground-based sensors (and robots) into hazardous regions. UAS have already been used to support hazard management and decision-makers during eruptive crises. As technologies advance, increased system capabilities, autonomy and availability, supported by more diverse and lighter-weight sensors, will offer unparalleled potential for hazard monitoring. UAS are expected to provide opportunities for pivotal advances in our understanding of complex physical and chemical volcanic processes.

Volcanica↗

USGS2019

Insights into pāhoehoe lava emplacement using visible and thermal structure-from-motion photogrammetry

We present the evolution over 3 months of a 2016–2017 pāhoehoe flow at Kīlauea as it changed from a narrow sheet flow into a compound lava field fed by a stable system of tubes. The portion of the flow located on Kīlauea's coastal plain was characterized using helicopter‐based visible and thermal structure‐from‐motion photogrammetry to construct a series of georeferenced digital surface models and thermal maps on eight different days. Results reveal key influences on the emplacement and evolution of such long‐lived pāhoehoe flows. This region of the flow grew by ~12 × 10 6 m 3 with a near‐constant time‐average discharge rate of 1.2–2.7 m 3 /s. The development of two tube systems is captured and shows an initial nascent tube enhanced by a narrow topographic confinement, which later inflated and created a topographic inversion that modulated the emplacement of a second flow lobe with its own tube system. The analysis of breakouts at various stages of the field's life suggests that the evolution of the thermal and morphological properties of the flow surface reflect its maturity. Thermal properties of breakouts were used to expand the empirical relationship of breakout cooling to longer timescales. This study contributes to the long‐term development and validation of more accurate predictive models for pāhoehoe, required during the management of long‐lasting lava flow crises in Hawai'i and elsewhere.

Hawaii↗

USGS2016

Volcano dome dynamics at Mount St. Helens: Deformation and intermittent subsidence monitored by seismicity and camera imagery pixel offsets

The surface deformation field measured at volcanic domes provides insights into the effects of magmatic processes, gravity- and gas-driven processes, and the development and distribution of internal dome structures. Here we study short-term dome deformation associated with earthquakes at Mount St. Helens, recorded by a permanent optical camera and seismic monitoring network. We use Digital Image Correlation (DIC) to compute the displacement field between successive images and compare the results to the occurrence and characteristics of seismic events during a 6 week period of dome growth in 2006. The results reveal that dome growth at Mount St. Helens was repeatedly interrupted by short-term meter-scale downward displacements at the dome surface, which were associated in time with low-frequency, large-magnitude seismic events followed by a tremor-like signal. The tremor was only recorded by the seismic stations closest to the dome. We find a correlation between the magnitudes of the camera-derived displacements and the spectral amplitudes of the associated tremor. We use the DIC results from two cameras and a high-resolution topographic model to derive full 3-D displacement maps, which reveals internal dome structures and the effect of the seismic activity on daily surface velocities. We postulate that the tremor is recording the gravity-driven response of the upper dome due to mechanical collapse or depressurization and fault-controlled slumping. Our results highlight the different scales and structural expressions during growth and disintegration of lava domes and the relationships between seismic and deformation signals.

Washington↗

USGS2010

Seismic source mechanism of degassing bursts at Kilauea volcano, Hawaii: Results from waveform inversion in the 10–50 s band

The current (March 2008 to February 2009) summit eruptive activity at Kilauea Volcano is characterized by explosive degassing bursts accompanied by very long period (VLP) seismic signals. We model the source mechanisms of VLP signals in the 10–50 s band using data recorded for 15 bursts with a 10‐station broadband network deployed in the summit caldera. To determine the source centroid location and source mechanism, we minimize the residual error between data and synthetics calculated by the finite difference method for a point source embedded in a homogeneous medium that takes topography into account. The VLP signals associated with the bursts originate in a source region ∼1 km below the eastern perimeter of Halemaumau pit crater. The observed waveforms are well explained by the combination of a volumetric component and a vertical single force component. For the volumetric component, several source geometries are obtained which equally explain the observed waveforms. These geometries include (1) a pipe dipping 64° to the northeast; (2) two intersecting cracks including an east striking crack (dike) dipping 80° to the north, intersecting a north striking crack (another dike) dipping 65° to the east; (3) a pipe dipping 58° to the northeast, intersecting a crack dipping 48° to the west–southwest; and (4) a pipe dipping 57° to the northeast, intersecting a pipe dipping 58° to the west–southwest. Using the dual‐crack model as reference, the largest volume change obtained among the 15 bursts is ∼24,400 m 3 , and the maximum amplitude (peak to peak) of the force is ∼20 GN. Each burst is marked by a similar sequence of deflation and inflation, trailed by decaying oscillations of the volumetric source. The vertical force is initially upward, synchronous with source deflation, then downward, synchronous with source reinflation, followed by oscillations with polarity opposite to the volumetric oscillations. This combination of force and volume change is attributed to pressure and momentum changes induced during a fluid dynamic source mechanism involving the ascent, expansion, and burst of a large slug of gas within the upper ∼150 m of the magma conduit. As the slug expands upon approach to the surface and more liquid becomes wall supported by viscous shear forces, the pressure below the slug decreases, inducing conduit deflation and an upward force on the Earth. The final rapid slug expansion and burst stimulate VLP and LP oscillations of the conduit system, which slowly decay due to viscous dissipation and elastic radiation. Consideration of the fluid dynamic arguments leads us to prefer the dual‐crack VLP source model as it is the only candidate model capable of producing plausible values of length scales and pressure changes. The magnitudes of the vertical forces observed in the 15 bursts appear consistent with slug masses of 10 4 to 10 6 kg.

Hawaii↗