Geology Reports⌕ Search

Geology topics

Michael E. Field

Publications and source records attributed to Michael E. Field.

At least 37 records · Page 2Linked to original sources
USGS2006

High-resolution chirp seismic reflection data acquired from the Cap de Creus shelf and canyon area, Gulf of Lions, Spain in 2004

Seismic reflection data were collected from the Cap de Creus shelf and canyon in the southwest portion of the Gulf of Lions in October 2004. The data were acquired using the U.S. Geological Survey`s (USGS) high-resolution Edgetech CHIRP 512i seismic reflection system aboard the R/V Oceanus. Data from the shipboard 3.5 kHz echosounder were also collected but are not presented here. The seismic reflection data were collected as part of EuroSTRATAFORM funded by the Office of Naval Research. In October 2004, more than 200 km of high resolution seismic reflection data were collected in water depths ranging 30 m - 600 m. All data were recorded with a Delph Seismic PC-based digital recording system and processed with Delph Seismic software. Processed sections were georeferenced into tiff images for digital archive, processing and display. Penetration ranged 20-80 m. The data feature high quality vertical cross-section imagery of numerous sequences of Quaternary seismic stratigraphy. The report includes trackline maps showing the location of the data, as well as both digital data files (SEG-Y) and images of all of the profiles. The data are of high quality and provide new information on the location and thickness of sediment deposits overlying a major erosion surface on the Cap de Creus shelf; they also provide new insight into sediment processes on the walls and in the channel of Cap de Creus Canyon. These data are under study by researchers at the US Geological Survey, the University of Barcelona, and Texas A and M University. Copies of the data are available to all researchers.

Open-File Report↗
USGS2004

Holocene reef accretion: southwest Molokai, Hawaii, U.S.A.

Two reef systems off south Molokai, Hale O Lono and Hikauhi (separated by only 10 km), show strong and fundamental differences in modern ecosystem structure and Holocene accretion history that reflect the influence of wave-induced near-bed shear stresses on reef development in Hawaii. Both sites are exposed to similar impacts from south, Kona, and trade-wind swell. However, the Hale O Lono site is exposed to north swell and the Hikuahi site is not. As a result, the reef at Hale O Lono records no late Holocene net accretion while the reef at Hikauhi records consistent and robust accretion over late Holocene time. Analysis and dating of 24 cores from Hale O Lono and Hikauhi reveal the presence of five major lithofacies that reflect paleo-environmental conditions. In order of decreasing depositional energy they are: (1) coral-algal bindstone; (2) mixed skeletal rudstone; (3) massive coral framestone; (4) unconsolidated floatstone; and (5) branching coral framestone-bafflestone. At Hale O Lono, 10 cores document a backstepping reef ranging from ∼ 8,100 cal yr BP (offshore) to ∼ 4,800 cal yr BP (nearshore). A depauperate community of modern coral diminishes shoreward and seaward of ∼ 15 m depth due to wave energy, disrupted recruitment activities, and physical abrasion. Evidence suggests a change from conditions conducive to accretion during the early Holocene to conditions detrimental to accretion in the late Holocene. Reef structure at Hikauhi, reconstructed from 14 cores, reveals a thick, rapidly accreting and young reef (maximum age ∼ 900 cal yr BP). Living coral cover on this reef increases seaward with distance from the reef crest but terminates at a depth of ∼ 20 m where the reef ends in a large sand field. The primary limitation on vertical reef growth is accommodation space under wave base, not recruitment activities or energy conditions. Interpretations of cored lithofacies suggest that modern reef growth on the southwest corner of Molokai, and by extension across Hawaii in general, is controlled by wave-induced near-bed shear stress related to refracted North Pacific swell. Holocene accretion patterns here also reflect the long-term influence of wave-induced near-bed shear stress from north swell during late Holocene time. This finding is consistent with other studies (e.g., Grigg 1998; Cabioch et al. 1999) that reflect the dominance of swell energy and sea level in controlling modern and late Holocene accretion elsewhere in Hawaii and across the Pacific and Indian oceans. Notably, however, this result is refined and clarified for Hawaii in the hypothesis of Rooney et al. (2003) stating that enhancement of the El Niño Southern Oscillation beginning approximately 5000 years ago led to increased north swell energy and signaled the end to net accretion along exposed coastlines in Hawaii. The exposure of Hale O Lono to north swell and the age of sea floor there (ca. 4,800 cal yr BP), coupled with the lack of north swell incidence at Hikauhi and the continuous accretion that has occurred there over the last millennium, strongly supports the ENSO reef hypothesis as outlined by Rooney et al. (2003). Other factors controlling Holocene reef accretion at the study site are relative sea-level position and rate of rise, and wave sheltering by Laau Point. Habitat suitable for reef accretion on the southwest shore of Molokai has shrunk throughout the Holocene.

Hawai'i↗
USGS2004

Coastal circulation and sediment dynamics along West Maui, Hawaii: Part III: Flow and particulate dynamics during the 2003 summer coral spawning season

High-resolution measurements of currents, temperature, salinity and turbidity were made over the course of three months off West Maui in the summer and early fall of 2003 to better understand coastal dynamics in coral reef habitats. Measurements were made through the emplacement of a series of bottom-mounted instruments in water depths less than 11 m. The studies were conducted in support of the U.S. Geological Survey (USGS) Coastal and Marine Geology Program's Coral Reef Project. The purpose of these measurements was to collect hydrographic data to better constrain the variability in currents and water column properties such as water temperature, salinity and turbidity in the vicinity of nearshore coral reef systems over the course of a summer and early fall when coral larvae spawn. These measurements support the ongoing process studies being conducted under the Coral Reef Project; the ultimate goal is to better understand the transport mechanisms of sediment, larvae, pollutants and other particles in coral reef settings. This report, the third in a series of three, describes data acquisition, processing and analysis.

Hawaii↗
USGS1995

Mudflow generated by retrogressive slope failure, Santa Barbara Basin, California continental borderland

The morphology and internal geometry of a mudflow deposit on the mainland slope of the Santa Barbara Basin are defined using high-resolution seismic-reflection data in combination with core samples. Sediment failure occurred on a 4 degrees slope in the uppermost part of late Quaternary well-bedded slope deposits. The failure zone extends from water depths of 374-510 m near the base of slope, occupies an area of 4 km 2 , and involved the translation of 0.01-0.02 km 3 of sediment. Major geomorphic features of the mudflow deposit include a headscarp 6-8 m high, a scar 50-700 m wide, and a main body 1 km long and 12 m thick. The hummocky surface of the mudflow deposits, their chaotic internal structure, and the bulbous toe tapering upslope to a thin tail are consistent with mass flow involving extensive internal deformation. Sediment failed in stages, ending with upslope retrogressive retreat of the headwall along the east side of the failure zone. Known sedimentation rates of 0.8-1.4 m/k.y., as well as the presence of a thin (0.15-0.5 m thick) sediment cap resting atop the scar surface, indicate that the failure probably occurred within the past few centuries. A geotechnical analysis incorporating the results of both static and dynamic triaxial strength tests shows that the failure was probably caused by a strong (M nearly equal 7.5) nearby earthquake. The weakened sediment that remained after earthquake shaking continued to flow down the gentle basin slope under the stresses generated by gravity alone. The analysis also shows that much of the slope sediment is marginally stable and that additional mudflows will probably occur during future strong seismic shaking.

California↗
USGS1991

Regressive coastal deposits on Quaternary continental shelves: Preservation and legacy

Regressive coastal deposits containing internal downlapping surfaces are common on continental shelves of the world. Through theoretical considerations and evaluation of examples from the literature and our own studies in California and Italy, we have examined the conditions that lead both to the formation and preservation of these deposits. Coastal downlapping deposits form by progradation of coastal and deltaic lithosomes during stable and falling sea level. in addition to the rate and direction of sea-level change, the major controls governing the development of downlapping deposits are sediment availability and shelf morphology (gradient, surface irregularity, and depth of shelf break). Continental margins receiving a large, continuous supply of sediment commonly have vertical stacks of thick, laterally extensive deposits; those fed by relatively small coastal streams may have well-developed shelf-margin deposits if accommodation space was available. in the absence of feeder streams, shelf-margin downlapping deposits can form from locally derived sediment. Regressive coastal deposits are preserved in a variety of settings, but they are least likely to be preserved on broad, low-gradient (coastal plain) shelves, where small drops in relative sea level were accompanied by large seaward shifts of the shoreline. Even on high-gradient tectonic margins, downlapping deposits commonly are not preserved on the midshelf. The process of shoreface erosion during a transgression is efficient at planing off deposits from previous depositional cycles. Where the deposits are thin, the deposit is partially or wholly reworked; where they are thick, the basal part may be preserved. Regressive deposits are most likely to be preserved along the shelf margin, where relatively thick sequences form at or below the position of the lowstand sea level. On many continental shelves, the coarse sandy texture of outer-shelf sediment largely reflects original deposition in a regressive coastal environment during a fall and lowstand of relative sea level.

California↗
USGS1990

Pliocene-Pleistocene growth of the Rio Ebro margin, northeast Spain: A prograding-slope model

Pliocene-Pleistocene marine deposits overlying Messinian evaporites off northeast Spain are composed of five distinct seismic facies. These facies are interpreted to represent deposition in five adjacent settings: distal (isolated) basin, basin plain, base of slope,slope, and shelf. Contrary to previous studies, a submarine-fan style of deposition is not evident. Distal-basin deposits are characterized by thin, wavy, parallel beds draping the sea floor. Basin-plain deposits are similar but also have flat-lying beds and some low-relief channels. Base-of-slope deposits are dominated by stacked, overlapping, elongate channel/levee deposits that have concave-upward bases and convex-upward tops. Slope sequences are thick accumulations of overbank deposits laterally interrupted by large upward-climbing canyon fill. The shelf component is composed of overlapping and stacked delta lobes. The composite sediment body is a prograded, upward-shallowing, offlap sequence initiated and controlled by the influx of terrigenous sediment from the Rio Ebro during the Pleistocene. This style of deposition is common in the rock record, and our model may be more appropriate as a modern analogue for some rocks than are conventional shelf-canyon-fan models of margin sedimentation.

Ebro River, Gulf of Valencia, Mediterranean Sea↗
USGS1985

Gas hydrates on the northern California continental margin

The inner continental margin of northern California is underlain by a well-defined and extensive acoustic reflector that crosses other reflectors and mimics the surface of the sea floor. This bottom-simulating reflector (BSR) lies at a typical subsurface depth of about 250 m and has been mapped continuously beneath the Klamath Plateau and upper slope (water depths of 800 to 1200 m) for a distance of more than 130 km; it covers an area of at least 3000 km 2 . Limited data show that the BSR extends northward into Oregon and seaward at least to the base of the slope (3000 m). The water depths, subsurface depths, and pervasive nature of the BSR all suggest that it represents the base of a natural-gas hydrate. Using standard phase boundary diagrams for hydrate stability, we estimate the local geothermal gradient within the gas hydrate to be about 55 °C/km. This value is higher than that of most subduction margins and may be a result of the youthfulness of the subducting oceanic crust. This acoustically inferred gas hydrate is the first to be mapped on the western conterminous United States continental margin.

California↗