Geology topics

Michael A. Wacker

Publications and source records attributed to Michael A. Wacker.

9 recordsLinked to original sources

USGS2015

Depth-dependent groundwater quality sampling at City of Tallahassee test well 32, Leon County, Florida, 2013

Public-supply wells sometimes produce water of less than desirable quality because contaminants can migrate to the open interval of wells through preferential pathways. If these pathways can be identified, zones that produce poor quality water can be excluded during the well-construction process. The U.S. Geological Survey has developed geophysical testing methods that can be used to delineate zones of high permeability in test wells. Once the highly permeable zones are identified, water-quality data can be collected from each zone to identify whether any of the zones produce water of poor quality. The zones producing poor quality water can then be cased off in the final well design so that they do not contribute flow to the production well, reducing subsequent water-treatment costs. A test well was drilled by the City of Tallahassee to assess the suitability of the site for the installation of a new well for public water supply. The test well is in Leon County in north-central Florida. The U.S. Geological Survey delineated high-permeability zones in the Upper Floridan aquifer, using borehole-geophysical data collected from the open interval of the test well. A composite water sample was collected from the open interval during high-flow conditions, and three discrete water samples were collected from specified depth intervals within the test well during low-flow conditions. Water-quality, source tracer, and age-dating results indicate that the open interval of the test well produces water of consistently high quality throughout its length. The cavernous nature of the open interval makes it likely that the highly permeable zones are interconnected in the aquifer by secondary porosity features.

Florida↗

USGS2014

Origins and delineation of saltwater intrusion in the Biscayne aquifer and changes in the distribution of saltwater in Miami-Dade County, Florida

Intrusion of saltwater into parts of the shallow karst Biscayne aquifer is a major concern for the 2.5 million residents of Miami-Dade County that rely on this aquifer as their primary drinking water supply. Saltwater intrusion of this aquifer began when the Everglades were drained to provide dry land for urban development and agriculture. The reduction in water levels caused by this drainage, combined with periodic droughts, allowed saltwater to flow inland along the base of the aquifer and to seep directly into the aquifer from the canals. The approximate inland extent of saltwater was last mapped in 1995. An examination of the inland extent of saltwater and the sources of saltwater in the aquifer was completed during 2008–2011 by using (1) all available salinity information, (2) time-series electromagnetic induction log datasets from 35 wells, (3) time-domain electromagnetic soundings collected at 79 locations, (4) a helicopter electromagnetic survey done during 2001 that was processed, calibrated, and published during the study, (5) cores and geophysical logs collected from 8 sites for stratigraphic analysis, (6) 8 new water-quality monitoring wells, and (7) analyses of 69 geochemical samples. The results of the study indicate that as of 2011 approximately 1,200 square kilometers (km 2 ) of the mainland part of the Biscayne aquifer were intruded by saltwater. The saltwater front was mapped farther inland than it was in 1995 in eight areas totaling about 24.1 km 2 . In many of these areas, analyses indicated that saltwater had encroached along the base of the aquifer. The saltwater front was mapped closer to the coast than it was in 1995 in four areas totaling approximately 6.2 km 2 . The changes in the mapped extent of saltwater resulted from improved spatial information, actual movement of the saltwater front, or a combination of both. Salinity monitoring in some of the canals in Miami-Dade County between 1988 and 2010 indicated influxes of saltwater, with maximum salinities ranging from 1.4 to 32 practical salinity units (PSU) upstream of the salinity control structures. Time-series electromagnetic induction log data from monitoring wells G–3601, G–3608, and G–3701, located adjacent to the Biscayne, Snapper Creek, and Black Creek Canals, respectively, and upstream of the salinity control structures, indicated shallow influxes of conductive water in the aquifer that likely resulted from leakage of brackish water or saltwater from these canals. The determination that saltwater influxes were recent is supported by the similarity in the oxygen and hydrogen stable isotope composition in samples from the Snapper Creek Canal, 1.6 kilometers (km) inland of a salinity control structure, and in samples from well G–3608, which is adjacent to the canal, as well as by the relative ages of the water sampled from well G–3608 and other wells open to the aquifer below the saltwater interface. Historical and recent salinity information from the Card Sound Road Canal, monitoring well FKS8 located adjacent to the canal, and the 2001 helicopter electromagnetic survey indicated that saltwater may occasionally leak from this canal as far inland as 15 km. This leakage may be prevented or reduced by a salinity control structure that was installed in May 2010. Saltwater also may have leaked from the Princeton Canal. Results of geochemical sampling and analysis indicate a close correspondence between droughts and saltwater intrusion. Tritium/helium-3 apparent (piston-flow) ages determined from samples of saltwater with chloride concentrations of about 1,000 milligrams per liter (mg/L) or greater generally corresponded to a period during which droughts were frequent. Comparison of average daily air temperatures in Miami, Florida, with estimates of recharge temperatures determined from the dissolved gas composition in water samples indicated that saltwater likely entered the aquifer in April or early May when water levels are typically at their lowest during the year. Conversely, most of the samples of freshwater with chloride concentrations less than about 1,000 mg/L indicate recharge temperatures corresponding to air temperatures in mid to late May when rainfall and water levels in the aquifer increase, and the piston-flow ages of these samples correspond to wet years. The piston-flow ages of freshwater samples generally were younger than ages of samples of saltwater. Saltwater samples that were depleted in boron, magnesium, potassium, sodium, and sulfate, and enriched in calcium relative to the concentrations theoretically produced by freshwater/seawater mixing, generally were found to be associated with areas where saltwater had recently intruded. The calcium to (bicarbonate + sulfate) molar ratios (Ca/(HCO 3 +SO 4 )) of these samples generally were greater than 1. Saltwater samples from some of the monitoring wells, however, indicated little or no enrichment or depletion of these ions relative to the theoretical freshwater/seawater mixing line, and the Ca/(HCO 3 +SO 4 ) molar ratios of these samples generally were less than 1. Results indicated that aquifer materials are approaching equilibrium with seawater at these well locations.

Florida↗

USGS2014

Geologic and hydrogeologic frameworks of the Biscayne aquifer in central Miami-Dade County, Florida

Evaluations of the lithostratigraphy, lithofacies, paleontology, ichnology, depositional environments, and cyclostratigraphy from 11 test coreholes were linked to geophysical interpretations, and to results of hydraulic slug tests of six test coreholes at the Snapper Creek Well Field (SCWF), to construct geologic and hydrogeologic frameworks for the study area in central Miami-Dade County, Florida. The resulting geologic and hydrogeologic frameworks are consistent with those recently described for the Biscayne aquifer in the nearby Lake Belt area in Miami-Dade County and link the Lake Belt area frameworks with those developed for the SCWF study area. The hydrogeologic framework is characterized by a triple-porosity pore system of (1) matrix porosity (mainly mesoporous interparticle porosity, moldic porosity, and mesoporous to megaporous separate vugs), which under dynamic conditions, produces limited flow; (2) megaporous, touching-vug porosity that commonly forms stratiform groundwater passageways; and (3) conduit porosity, including bedding-plane vugs, decimeter-scale diameter vertical solution pipes, and meter-scale cavernous vugs. The various pore types and associated permeabilities generally have a predictable vertical spatial distribution related to the cyclostratigraphy. The Biscayne aquifer within the study area can be described as two major flow units separated by a single middle semiconfining unit. The upper Biscayne aquifer flow unit is present mainly within the Miami Limestone at the top of the aquifer and has the greatest hydraulic conductivity values, with a mean of 8,200 feet per day. The middle semiconfining unit, mainly within the upper Fort Thompson Formation, comprises continuous to discontinuous zones with (1) matrix porosity; (2) leaky, low permeability layers that may have up to centimeter-scale vuggy porosity with higher vertical permeability than horizontal permeability; and (3) stratiform flow zones composed of fossil moldic porosity, burrow related vugs, or irregular vugs. Flow zones with a mean hydraulic conductivity of 2,600 feet per day are present within the middle semiconfining unit, but none of the flow zones are continuous across the study area. The lower Biscayne aquifer flow unit comprises a group of flow zones in the lower part of the aquifer. These flow zones are present in the lower part of the Fort Thompson Formation and in some cases within the limestone or sandstone or both in the uppermost part of the Pinecrest Sand Member of the Tamiami Formation. The mean hydraulic conductivity of major flow zones within the lower Biscayne aquifer flow unit is 5,900 feet per day, and the mean value for minor flow zones is 2,900 feet per day. A semiconfining unit is present beneath the Biscayne aquifer. The boundary between the two hydrologic units is at the top or near the top of the Pinecrest Sand Member of the Tamiami Formation. The lower semiconfining unit has a hydraulic conductivity of less than 350 feet per day. The most productive zones of groundwater flow within the two Biscayne aquifer flow units have a characteristic pore system dominated by stratiform megaporosity related to selective dissolution of an Ophiomorpha-dominated ichnofabric. In the upper flow unit, decimeter-scale vertical solution pipes that are common in some areas of the SCWF study area contribute to high vertical permeability compared to that in areas without the pipes. Cross-hole flowmeter data collected from the SCWF test coreholes show that the distribution of vuggy porosity, matrix porosity, and permeability within the Biscayne aquifer of the SCWF is highly heterogeneous and anisotropic. Groundwater withdrawals from production well fields in southeastern Florida may be inducing recharge of the Biscayne aquifer from canals near the well fields that are used for water-management functions, such as flood control and well-field pumping. The SCWF was chosen as a location within Miami-Dade County to study the potential for such recharge to the Biscayne aquifer from the C–2 (Snapper Creek) canal that roughly divides the well field in half. Geologic, hydrogeologic, and hydraulic information on the aquifer collected during construction of monitoring wells within the SCWF could be used to evaluate the groundwater flow budget at the well-field scale.

Florida↗

USGS2010

Tools and data acquisition of borehole geophysical logging for the Florida Power and Light Company Turkey Point Power Plant in support of a groundwater, surface-water, and ecological monitoring plan, Miami-Dade County, Florida

Borehole geophysical logs were obtained from selected exploratory coreholes in the vicinity of the Florida Power and Light Company Turkey Point Power Plant. The geophysical logging tools used and logging sequences performed during this project are summarized herein to include borehole logging methods, descriptions of the properties measured, types of data obtained, and calibration information.

Open-File Report↗

USGS2009

Hydrogeologic and Hydraulic Characterization of the Surficial Aquifer System, and Origin of High Salinity Groundwater, Palm Beach County, Florida

Previous studies of the hydrogeology of the surficial aquifer system in Palm Beach County, Florida, have focused mostly on the eastern one-half to one-third of the county in the more densely populated coastal areas. These studies have not placed the hydrogeology in a framework in which stratigraphic units in this complex aquifer system are defined and correlated between wells. Interest in the surficial aquifer system has increased because of population growth, westward expansion of urbanized areas, and increased utilization of surface-water resources in the central and western areas of the county. In 2004, the U.S. Geological Survey, in cooperation with the South Florida Water Management District, initiated an investigation to delineate the hydrogeologic framework of the surficial aquifer system in Palm Beach County, based on a lithostratigraphic framework, and to evaluate hydraulic properties and characteristics of units and permeable zones within this framework. A lithostratigraphic framework was delineated by correlating markers between all wells with data available based primarily on borehole natural gamma-ray geophysical log signatures and secondarily, lithologic characteristics. These correlation markers approximately correspond to important lithostratigraphic unit boundaries. Using the markers as guides to their boundaries, the surficial aquifer system was divided into three main permeable zones or subaquifers, which are designated, from shallowest to deepest, zones 1, 2, and 3. Zone 1 is above the Tamiami Formation in the Anastasia and Fort Thompson Formations. Zone 2 primarily is in the upper part or Pinecrest Sand Member of the Tamiami Formation, and zone 3 is in the Ochopee Limestone Member of the Tamiami Formation or its correlative equivalent. Differences in the lithologic character exist between these three zones, and these differences commonly include differences in the nature of the pore space. Zone 1 attains its greatest thickness (50 feet or more) and highest transmissivity in coastal areas. Zone 2, the most transmissive and extensive zone, is thickest (80 feet or more) and most transmissive in the inland eastern areas near Florida's Turnpike. In this area, zone 1 is absent, and the semiconfining unit above zone 2 extends to the land surface with a thickness commonly ranging from 50 to 100 feet. The thickness of zone 2 decreases to zero in most wells near the coast. Zone 3 attains its greatest thickness (100 feet or more) in the southwestern and south-central areas; zone 3 is equivalent to the gray limestone aquifer. The distribution of transmissivity was mapped by zone; however, zones 2 and 3 were commonly combined in aquifer tests. Maximum transmissivities for zone 1, zones 2 and 3, and zone 3 were 90,000, 180,000, and 70,000 ft2/d (feet-squared per day), respectively. The northern extent of the area with transmissivity greater than 50,000 ft2/d for zones 2 and 3 in the inland northeastern area along Florida's Turnpike has not been defined based on available data and could extend 5 to 10 miles farther north than mapped. Based on the thickness of zone 2 and a limited number of aquifer tests, a large area of zone 2 with transmissivity greater than 10,000 ft2/d, and possibly as much as 30,000 ft2/d, extends to the west across Water Conservation Area 1 from the inland southeastern area into the south-central area and some of the southwestern area. In contrast to the Biscayne aquifer present to the south of Palm Beach County, zones 2 and 3 are interpreted to be present principally in the Tamiami Formation and are commonly overlain by a thick semiconfining unit of moderate permeability. These zones have been referred to as the 'Turnpike' aquifer in the inland eastern areas of Palm Beach County, and the extent of greatest thickness and transmissivity follows, or is adjacent to, Florida's Turnpike. Where it is thick and transmissive, zone 1 may be considered equivalent to the Biscayne aquifer. Areas

Scientific Investigations Report↗

USGS2008

Borehole Geophysical Logging Program: Incorporating New and Existing Techniques in Hydrologic Studies

The borehole geophysical logging program at the U.S. Geological Survey (USGS)-Florida Integrated Science Center (FISC) provides subsurface information needed to resolve geologic, hydrologic, and environmental issues in Florida. The program includes the acquisition, processing, display, interpretation, and archiving of borehole geophysical logs. The borehole geophysical logging program is a critical component of many FISC investigations, including hydrogeologic framework studies, aquifer flow-zone characterization, and freshwater-saltwater interface delineation.

Fact Sheet↗

USGS2007

Hydrostratigraphic Framework and Selection and Correlation of Geophysical Log Markers in the Surficial Aquifer System, Palm Beach County, Florida

The surficial aquifer system is the major source of freshwater for public water supply in Palm Beach County, Florida, yet many previous studies of the hydrogeology of this aquifer system have focused only on the eastern one-half to one-third of the county in the more densely populated coastal area (Land and others, 1973; Swayze and others, 1980; Swayze and Miller, 1984; Shine and others, 1989). Population growth in the county has resulted in the westward expansion of urbanized areas into agricultural areas and has created new demands on the water resources of the county. Additionally, interest in surface-water resources of central and western areas of the county has increased. In these areas, plans for additional surface-water storage reservoirs are being made under the Comprehensive Everglades Restoration Plan originally proposed by the U.S. Army Corps of Engineers and the South Florida Water Management District (1999), and stormwater treatment areas have been constructed by the South Florida Water Management District. Surface-water and ground-water interactions in the Everglades are thought to be important to water budgets, water quality, and ecology (Harvey and others, 2002). Most of the previous hydrogeologic and ground-water flow simulation studies of the surficial aquifer system have not utilized a hydrostratigraphic framework, in which stratigraphic or sequence stratigraphic units, such as those proposed in Cunningham and others (2001), are delineated in this stratigraphically complex aquifer system. A thick zone of secondary permeability mapped by Swayze and Miller (1984) was not subdivided and was identified as only being within the Anastasia Formation of Pleistocene age. Miller (1987) published 11 geologic sections of the surficial aquifer system, but did not delineate any named stratigraphic units in these sections. This limited interpretation has resulted, in part, from the complex facies changes within rocks and sediments of the surficial aquifer system and the seemingly indistinct and repetitious nature of the most common lithologies, which include sand, shell, sandstone, and limestone. Model construction and layer definition in a simulation of ground-water flow within the surficial aquifer system of Palm Beach County utilized only the boundaries of one or two major hydrogeologic zones, such as the Biscayne aquifer and surficial aquifer system; otherwise layers were defined by average elevations rather than geologic structure or stratigraphy (Shine and others, 1989). Additionally, each major permeable zone layer in the model was assumed to have constant hydraulic conductivity with no allowance for the possibility of discrete (thin) flow zones within the zone. The key to understanding the spatial distribution and hydraulic connectivity of permeable zones in the surficial aquifer system beneath Palm Beach County is the development of a stratigraphic framework based on a consistent method of county-wide correlation. Variability in hydraulic properties in the system needs to be linked to the stratigraphic units delineated in this framework, and proper delineation of the hydrostratigraphic framework should provide a better understanding and simulation of the ground-water flow system. In 2004, the U.S. Geological Survey, in cooperation with the South Florida Water Management District, initiated an investigation to develop a hydrostratigraphic framework for the surficial aquifer system in Palm Beach County.

Scientific Investigations Map↗

USGS2004

Hydrogeology and ground-water flow at Levee 31N, Miami-Dade County, Florida, July 2003 to May 2004: As part of the Comprehensive Everglades Restoration Plan

Introduction The Levee 31N Seepage Management Pilot Project began in 2001, as part of the Comprehensive Everglades Restoration Plan (CERP). The pilot project seeks to determine the appropriate technology needed to control seepage from Everglades National Park (ENP), and provide the appropriate amount of ground-water flow to minimize potential impacts to the West Well Field and Biscayne Bay. To meet these needs, a levee cut-off wall (vertical subsurface barrier) has been proposed along Levee 31N in Miami-Dade County to reduce seepage flow from ENP. During the wet season, ground water would be captured by wells adjacent to Levee 31N and diverted into a buffer area adjacent to ENP where sheetflow would be reestablished. An integrated, multidisciplinary investigation of ground-water flow is currently in progress by the South Florida Water Management District (SFWMD) and U.S. Army Corps of Engineers as part of the Levee 31N Seepage Management Pilot Project. Pre-seepage pilot wall ground-water flow patterns are being assessed through use of in situ heat-pulse flowmeter measurements, monitoring the vertical changes in hydraulic head and temperature, ground-water age dating, and measurement of the vertical change in ambient ground-water quality. A high-resolution hydrogeologic framework is needed as part of this effort. In 2003, the U.S. Geological Survey (USGS) initiated a study to characterize the surficial aquifer system in detail to a depth of about 100 feet below ground level in the Levee 31N study area, and to delineate karst preferential ground-water flow zones. This study was part of a cooperative agreement between the USGS and the SFWMD (USGS Joint Funding Agreement No. 04E0FL208011 and SFWMD Agreement No. CPO40324), and funded through CERP.

Florida↗

USGS2004

Characterization of aquifer heterogeneity using cyclostratigraphy and geophysical methods in the upper part of the Karstic Biscayne Aquifer, Southeastern Florida

This report identifies and characterizes candidate ground-water flow zones in the upper part of the shallow, eogenetic karst limestone of the Biscayne aquifer in the Lake Belt area of north-central Miami-Dade County using cyclostratigraphy, ground-penetrating radar (GPR), borehole geophysical logs, and continuously drilled cores. About 60 miles of GPR profiles were used to calculate depths to shallow geologic contacts and hydrogeologic units, image karst features, and produce qualitative views of the porosity distribution. Descriptions of the lithology, rock fabrics, and cyclostratigraphy, and interpretation of depositional environments of 50 test coreholes were linked to the geophysical interpretations to provide an accurate hydrogeologic framework. Molluscan and benthic foraminiferal paleontologic constraints guided interpretation of depositional environments represented by rockfabric facies. Digital borehole images were used to characterize and quantify large-scale vuggy porosity. Preliminary heat-pulse flowmeter data were coupled with the digital borehole image data to identify candidate ground-water flow zones. Combined results show that the porosity and permeability of the karst limestone of the Biscayne aquifer have a highly heterogeneous and anisotropic distribution that is mostly related to secondary porosity overprinting vertical stacking of rock-fabric facies within high-frequency cycles (HFCs). This distribution of porosity produces a dual-porosity system consisting of diffuse-carbonate and conduit flow zones. The nonuniform ground-water flow in the upper part of the Biscayne aquifer is mostly localized through secondary permeability, the result of solution-enlarged carbonate grains, depositional textures, bedding planes, cracks, root molds, and paleokarst surfaces. Many of the resulting pore types are classified as touching vugs. GPR, borehole geophysical logs, and whole-core analyses show that there is an empirical relation between formation porosity, permeability, formation electrical conductivity, and GPR reflection amplitudes? as porosity and permeability increase, formation electrical conductivity increases and reflection amplitude decreases. This relation was observed throughout the entire vertical and lateral section of the upper part of the Biscayne aquifer in the study area. Further, upward-shallowing brackish- or freshwatercapped cycles of the upper part of the Fort Thompson Formation show low-amplitude reflections near their base that correspond to relatively higher porosity and permeability. This distribution is related to a systematic vertical stacking of rock-fabric facies within the cycle. Inferred flow characteristics of the porosity distribution within the upper part of the Biscayne aquifer were used to identify four ground-water flow classes, with each characterized by a discrete pore system that affects vertical and horizontal groundwater flow: (1) a low-permeability peat, muck, and marl ground-water flow class; (2) a horizontal conduit ground-water flow class; (3) a leaky, low-permeability ground-water flow class; and (4) a diffuse-carbonate ground-water flow class. At the top of the Biscayne aquifer, peat, muck, and marl can combine to form a relatively low-permeability layer of Holocene sediment that water moves through slowly. Most horizontal conduit flow is inferred to occur along touching vugs in portions of the following rock-fabric facies: (1) touchingvug pelecypod floatstone and rudstone, (2) sandy touching-vug pelecypod floatstone and rudstone, (3) vuggy wackestone and packstone, (4) laminated peloid grainstone and packstone, (5) peloid grainstone and packstone, and (6) peloid wackestone and packstone. Gastropod floatstone and rudstone, mudstone and wackestone, and pedogenic limestone rock-fabric facies are the main hosts for leaky, low-permeability units.

Florida↗