Geology Reports⌕ Search

Geology topics

Mark R. Hudson

Publications and source records attributed to Mark R. Hudson.

At least 37 records · Page 2Linked to original sources
USGS2011

Geologic map of the Cochiti Dam quadrangle, Sandoval County, New Mexico

The Cochiti Dam quadrangle is located in the southern part of the Española Basin and contains sedimentary and volcanic deposits that record alluvial, colluvial, eolian, tectonic and volcanic processes over the past seventeen million years. The geology was mapped from 1997 to 1999 and modified in 2004 to 2008. The primary mapping responsibilities were as follows: Dethier mapped the surficial deposits, basin-fill sedimentary deposits, Miocene to Quaternary volcanic deposits of the Jemez volcanic field, and a preliminary version of fault distribution. Thompson and Hudson mapped the Pliocene and Quaternary volcanic deposits of the Cerros del Rio volcanic field. Thompson, Minor, and Hudson mapped surface exposures of faults and Hudson conducted paleomagnetic studies for stratigraphic correlations. Thompson prepared the digital compilation of the geologic map. The mapped distribution of units is based primarily on interpretation of 1:16,000-scale, color aerial photographs taken in 1992, and 1:40,000-scale, black-and-white, aerial photographs taken in 1996. Most of the contacts on the map were transferred from the aerial photographs using a photogrammetric stereo-plotter and subsequently field checked for accuracy and revised based on field determination of allostratigraphic and lithostratigraphic units. Determination of lithostratigraphic units in volcanic deposits was aided by geochemical data, 40 Ar/ 39 Ar geochronology, aeromagnetic and paleomagnetic data. Supplemental revision of mapped contacts was based on interpretation of USGS 1-meter orthoimagery.

New Mexico↗
USGS2011

Three-dimensional geologic model of the southeastern Espanola Basin, Santa Fe County, New Mexico

This multimedia model and report show and describe digital three-dimensional faulted surfaces and volumes of lithologic units that confine and constrain the basin-fill aquifers within the Espanola Basin of north-central New Mexico. These aquifers are the primary groundwater resource for the cities of Santa Fe and Espanola, six Pueblo nations, and the surrounding areas. The model presented in this report is a synthesis of geologic information that includes (1) aeromagnetic and gravity data and seismic cross sections; (2) lithologic descriptions, interpretations, and geophysical logs from selected drill holes; (3) geologic maps, geologic cross sections, and interpretations; and (4) mapped faults and interpreted faults from geophysical data. Modeled faults individually or collectively affect the continuity of the rocks that contain the basin aquifers; they also help define the form of this rift basin. Structure, trend, and dip data not previously published were added; these structures are derived from interpretations of geophysical information and recent field observations. Where possible, data were compared and validated and reflect the complex relations of structures in this part of the Rio Grande rift. This interactive geologic framework model can be used as a tool to visually explore and study geologic structures within the Espanola Basin, to show the connectivity of geologic units of high and low permeability between and across faults, and to show approximate dips of the lithologic units. The viewing software can be used to display other data and information, such as drill-hole data, within this geologic framework model in three-dimensional space.

Scientific Investigations Report↗
USGS2010

Paleomagnetism and rotation constraints for the middle Miocene southwestern Nevada volcanic field

Middle Miocene rocks of the southwestern Nevada volcanic field (SWNVF) lie across the projection of the Walker Lane belt within the Basin and Range province and thus provide an interesting opportunity to test for late Cenozoic vertical-axis rotation. Paleomagnetic data from individual ash flow sheets document no significant relative vertical-axis rotation among localities within central SWNVF, an area of relatively low stratal tilts and widely spaced faults. A time-averaged mean paleomagnetic direction (D = 351.4°, I = 52.7°, α 95 = 4.5°) calculated from data from numerous separate rock units suggests that the central SWNVF underwent minimal counterclockwise vertical-axis rotation (R = −7.1° ± 6.6°) with respect to the North American craton. No clockwise vertical-axis rotation is found to support projection of dextral faults of the Walker Lane beneath the central SWNVF. Clockwise rotation of variable magnitude is common at numerous sites from southern and western margins of the field. These clockwise rotations probably reflect dextral shear strain developed at the interface between the little extended central SWNVF block and more strongly extended areas to the south and southwest of the field. Negligible rotation of 11.45-Ma to 13.25-Ma tuffs relative to the central SWNVF was found at the southeast margin of the field where 90° clockwise rotation at the northwest termination of the Las Vegas Valley shear zone had been postulated. Any clockwise rotation in this area must predate 13.25 Ma, and thus dextral shear within this part of the Walker Lane belt was not synchronous or connected across the southern margin of the field. Small counterclockwise vertical-axis rotation relative to the craton, as found for the central SWNVF block, might be a regional feature in the western Great Basin.

Tectonics↗
USGS2010

Geologic map of the Maumee quadrangle, Searcy and Marion Counties, Arkansas

This map summarizes the geology of the Maumee 7.5-minute quadrangle in northern Arkansas. The map area is in the Ozark plateaus region on the southern flank of the Ozark dome. The Springfield Plateau, composed of Mississippian cherty limestone, overlies the Salem Plateau, composed of Ordovician carbonate and clastic rocks, with areas of Silurian rocks in between. Erosion related to the Buffalo River and its tributaries, Tomahawk, Water, and Dry Creeks, has exposed a 1,200-ft-thick section of Mississippian, Silurian, and Ordovician rocks mildly deformed by faults and folds. An approximately 130-mile-long corridor along the Buffalo River forms the Buffalo National River that is administered by the National Park Service. McKnight (1935) mapped the geology of the Maumee quadrangle as part of a larger 1:125,000-scale map focused on understanding the lead and zinc deposits common in the area. Detailed new mapping for this study was compiled using a Geographic Information System (GIS) at 1:24,000 scale. Site location and elevation were obtained by using a Global Positioning Satellite (GPS) receiver in conjunction with a U.S. Geological Survey 7.5-minute topographic map and barometric altimeter. U.S. Geological Survey 10-m digital elevation model data were used to derive a hill-shade-relief map used along with digital orthophotographs to map ledge-forming units between field sites. Bedding attitudes were measured in drainage bottoms and on well-exposed ledges. Bedding measured at less than 2 degree dip is indicated as horizontal. Structure contours constructed for the base of the Boone Formation are constrained by field-determined elevations on both upper and lower formation contacts.

Scientific Investigations Map↗
USGS2009

Geologic map of the St. Joe quadrangle, Searcy and Marion Counties, Arkansas

This map summarizes the geology of the St. Joe 7.5-minute quadrangle in the Ozark Plateaus region of northern Arkansas. Geologically, the area lies on the southern flank of the Ozark dome, an uplift that exposes oldest rocks at its center in Missouri. Physiographically, the St. Joe quadrangle lies within the Springfield Plateau, a topographic surface generally held up by Mississippian cherty limestone. The quadrangle also contains isolated mountains (for example, Pilot Mountain) capped by Pennsylvanian rocks that are erosional outliers of the higher Boston Mountains plateau to the south. Tomahawk Creek, a tributary of the Buffalo River, flows through the eastern part of the map area, enhancing bedrock erosion. Exposed bedrock of this region comprises an approximately 1,300-ft-thick sequence of Ordovician, Mississippian, and Pennsylvanian carbonate and clastic sedimentary rocks that have been mildly deformed by a series of faults and folds. The geology of the St. Joe quadrangle was mapped by McKnight (1935) as part of a larger area at 1:125,000 scale. The current map confirms many features of this previous study, but it also identifies new structures and uses a revised stratigraphy. Mapping for this study was conducted by field inspection of numerous sites and was compiled as a 1:24,000-scale geographic information system (GIS) database. Locations and elevations of sites were determined with the aid of a global positioning satellite receiver and a hand-held barometric altimeter that was frequently recalibrated at points of known elevation. Hill-shade-relief and slope maps derived from a U.S. Geological Survey 10-m digital elevation model as well as U.S. Geological Survey orthophotographs from 2000 were used to help trace ledge-forming units between field traverses within the Upper Mississippian and Pennsylvanian part of the stratigraphic sequence. Strikes and dips of beds were typically measured along stream drainages or at well-exposed ledges. Beds dipping less than 2 degrees are shown as horizontal. Structure contours constructed on the base of the Boone Formation were hand drawn based on elevations of control points on both lower and upper contacts of the Boone Formation as well as other limiting information on their maximum or minimum elevations.

Scientific Investigations Map↗
USGS2007

Guides to understanding the aeromagnetic expression of faults in sedimentary basins: Lessons learned from the central Rio Grande rift, New Mexico

High-resolution aeromagnetic data acquired over several basins in the central Rio Grande rift, north-central New Mexico, prominently display low-amplitude (5–15 nT) linear anomalies associated with faults that offset basin-fill sediments. The linear anomalies give an unparalleled view of concealed faults within the basins that has significant implications for future basin studies. These implications provide the impetus for understanding the aeromagnetic expression of faults in greater detail. Lessons learned from the central Rio Grande rift help to understand the utility of aeromagnetic data for examining concealed faults in sedimentary basins in general. For example, linear anomalies in the rift can be explained entirely by the tectonic juxtaposition of magnetically differing strata rather than the product of chemical processes acting at the fault zone. Differences in layer thickness, depth to the layer(s), and magnetic susceptibility govern the variability of the anomaly shape. Further investigations of these variables using simple models provide graphical, mathematical, and conceptual guides for understanding the aeromagnetic expression of faults, including the criteria for aeromagnetic expression of faults, how to locate fault traces from aeromagnetic anomalies, the effect of fault dip, and how to assess the role of topography. The horizontal gradient method applied to reduced-to-pole aeromagnetic data is particularly effective in mapping fault locations, especially at regional scales. With our new understanding of the aeromagnetic expression of faults, we updated interpretations of faults from the aeromagnetic data for the central Rio Grande rift. These interpretations, along with the guides, should provide direction and fuel for future work in a wide variety of multidisciplinary basin-related topics.

New Mexico↗
USGS2007

Geologic Map of the Boxley Quadrangle, Newton and Madison Counties, Arkansas

This map summarizes the geology of the Boxley 7.5-minute quadrangle in the Ozark Plateaus region of northern Arkansas. Geologically, the area lies on the southern flank of the Ozark dome, an uplift that exposes oldest rocks at its center in Missouri. Physiographically, the Boxley quadrangle lies within the Boston Mountains, a high plateau region underlain by Pennsylvanian sandstones and shales. Valleys of the Buffalo River and its tributaries expose an approximately 1,600-ft-(490-m-)thick sequence of Ordovician, Mississippian, and Pennsylvanian carbonate and clastic sedimentary rocks that have been mildly deformed by a series of faults and folds. Part of Buffalo National River, a park encompassing the Buffalo River and adjacent land that is administered by the National Park Service, extends through the eastern part of the quadrangle. Mapping for this study was conducted by field inspection of numerous sites and was compiled as a 1:24,000-scale geographic information system (GIS) database. Locations and elevation sites were determined with the aid of a global positioning satellite receiver and a hand-held barometric altimeter. Hill-shade-relief and slope maps derived from a U.S. Geological Survey 10-m digital elevation model as well as orthophotos were used to help trace ledge-forming units between field traverses within the Upper Mississippian and Pennsylvanian part of the stratigraphic sequence. Strike and dip of beds were typically measured along stream drainages or at well-exposed ledges. Structure contours were constructed on the top of the Boone Formation and the base of a prominent sandstone unit within the Bloyd Formation based on elevations of control points as well as other limiting information on their maximum or minimum elevations.

Scientific Investigations Map↗
USGS2007

Three-Dimensional Geologic Framework Model for a Karst Aquifer System, Hasty and Western Grove Quadrangles, Northern Arkansas

Understanding ground-water flow in a karst aquifer benefits from a detailed conception of the three-dimensional (3D) geologic framework. Traditional two-dimensional products, such as geologic maps, cross-sections, and structure contour maps, convey a mental picture of the area but a stronger conceptualization can be achieved by constructing a digital 3D representation of the stratigraphic and structural geologic features. In this study, a 3D geologic model was created to better understand a karst aquifer system in the Buffalo National River watershed in northern Arkansas. The model was constructed based on data obtained from recent, detailed geologic mapping for the Hasty and Western Grove 7.5-minute quadrangles. The resulting model represents 11 stratigraphic zones of Ordovician, Mississippian, and Pennsylvanian age. As a result of the highly dissected topography, stratigraphic and structural control from geologic contacts and interpreted structure contours were sufficient for effectively modeling the faults and folds in the model area. Combined with recent dye-tracing studies, the 3D framework model is useful for visualizing the various geologic features and for analyzing the potential control they exert on the ground-water flow regime. Evaluation of the model, by comparison to published maps and cross-sections, indicates that the model accurately reproduces both the surface geology and subsurface geologic features of the area.

Scientific Investigations Report↗
USGS2006

Regional survey of structural properties and cementation patterns of fault zones in the northern part of the Albuquerque Basin, New Mexico - Implications for ground-water flow

Motivated by the need to document and evaluate the types and variability of fault zone properties that potentially affect aquifer systems in basins of the middle Rio Grande rift, we systematically characterized structural and cementation properties of exposed fault zones at 176 sites in the northern Albuquerque Basin. A statistical analysis of measurements and observations evaluated four aspects of the fault zones: (1) attitude and displacement, (2) cement, (3) lithology of the host rock or sediment, and (4) character and width of distinctive structural architectural components at the outcrop scale. Three structural architectural components of the fault zones were observed: (1) outer damage zones related to fault growth; these zones typically contain deformation bands, shear fractures, and open extensional fractures, which strike subparallel to the fault and may promote ground-water flow along the fault zone; (2) inner mixed zones composed of variably entrained, disrupted, and dismembered blocks of host sediment; and (3) central fault cores that accommodate most shear strain and in which persistent low- permeability clay-rich rocks likely impede the flow of water across the fault. The lithology of the host rock or sediment influences the structure of the fault zone and the width of its components. Different grain-size distributions and degrees of induration of the host materials produce differences in material strength that lead to variations in width, degree, and style of fracturing and other fault-related deformation. In addition, lithology of the host sediment appears to strongly control the distribution of cement in fault zones. Most faults strike north to north-northeast and dip 55? - 77? east or west, toward the basin center. Most faults exhibit normal slip, and many of these faults have been reactivated by normal-oblique and strike slip. Although measured fault displacements have a broad range, from 0.9 to 4,000 m, most are <100 m, and fault zones appear to have formed mainly at depths less than 1,000 m. Fault zone widths do not exceed 40 m (median width = 15.5 m). The mean width of fault cores (0.1 m) is nearly one order of magnitude less than that of mixed zones (0.75 m) and two orders of magnitude less than that of damage zones (9.7 m). Cements, a proxy for localized flow of ancient ground water, are common along fault zones in the basin. Silica cements are limited to faults that are near and strike north to northwest toward the Jemez volcanic field north of the basin, whereas carbonate fault cements are widely distributed. Coarse sediments (gravel and sand) host the greatest concentrations of cement within fault zones. Cements fill some extension fractures and, to a lesser degree, are concentrated along shear fractures and deformation bands within inner damage zones. Cements are commonly concentrated in mixed zones and inner damage zones on one side of a fault and thus are asymmetrically distributed within a fault zone, but cement does not consistently lie on the basinward side of faults. From observed spatial patterns of asymmetrically distributed fault zone cements, we infer that ancient ground-water flow was commonly localized along, and bounded by, faults in the basin. It is apparent from our study that the Albuquerque Basin contains a high concentration of faults. The geometry of, internal structure of, and cement and clay distribution in fault zones have created and will continue to create considerable heterogeneity of permeability within the basin aquifers. The characteristics and statistical range of fault zone features appear to be predictable and consistent throughout the basin; this predictability can be used in ground-water flow simulations that consider the influence of faults.

New Mexico↗
USGS2006

Geologic map of the Western Grove quadrangle, northwestern Arkansas

This map summarizes the geology of the Western Grove 7.5-minute quadrangle in northern Arkansas that is located on the southern flank of the Ozark dome, a late Paleozoic regional uplift. The exposed bedrock of this map area comprises approximately 1,000 ft of Ordovician and Mississippian carbonate and clastic sedimentary rocks that have been mildly folded and broken by faults. A segment of the Buffalo River loops through the southern part of the quadrangle, and the river and adjacent lands form part of Buffalo National River, a park administered by the U.S. National Park Service. This geologic map provides information to better understand the natural resources of the Buffalo River watershed, particularly its karst hydrogeologic framework.

Scientific Investigations Map↗
USGS2004

Geologic map of the Hasty Quadrangle, Boone and Newton Counties, Arkansas

This digital geologic map compilation presents new polygon (for example, geologic map unit contacts), line (for example, fault, fold axis, and structure contour), and point (for example, structural attitude, contact elevations) vector data for the Hasty 7.5-minute quadrangle in northern Arkansas. The map database, which is at 1:24,000-scale resolution, provides geologic coverage of an area of current hydrogeologic, tectonic, and stratigraphic interest. The Hasty quadrangle is located in northern Newton and southern Boone Counties about 20 km south of the town of Harrison. The map area is underlain by sedimentary rocks of Ordovician, Mississippian, and Pennsylvanian age that were mildly deformed by a series of normal and strike-slip faults and folds. The area is representative of the stratigraphic and structural setting of the southern Ozark Dome. The Hasty quadrangle map provides new geologic information for better understanding groundwater flow paths in and adjacent to the Buffalo River watershed.

Scientific Investigations Map↗
USGS2003

Geologic map of the Ponca quadrangle, Newton, Boone, and Carroll Counties, Arkansas

This digital geologic map compilation presents new polygon (i.e., geologic map unit contacts), line (i.e., fault, fold axis, and structure contour), and point (i.e., structural attitude, contact elevations) vector data for the Ponca 7 1/2' quadrangle in northern Arkansas. The map database, which is at 1:24,000-scale resolution, provides geologic coverage of an area of current hydrogeologic, tectonic, and stratigraphic interest. The Ponca quadrangle is located in Newton, Boone, and Carroll Counties about 20 km southwest of the town of Harrison. The map area is underlain by sedimentary rocks of Ordovician, Mississippian, and Pennsylvanian age that were mildly deformed by a series of normal and strike-slip faults and folds. The area is representative of the stratigraphic and structural setting of the southern Ozark Dome. The Ponca quadrangle map provides new geologic information for better understanding groundwater flow paths and development of karst features in and adjacent to the Buffalo River watershed.

Miscellaneous Field Studies Map↗
USGS2002

Eagle collapse center: Interpretation of evidence for late Cenozoic evaporite-related deformation in the Eagle River basin, Colorado

Evaporite tectonism resulted in deformation and collapse over an area of ~2500 km2 that is referred to as the Eagle collapse center. The collapse center includes much of the Eagle and Colorado River drainage basins between Vail, Dotsero, and McCoy, Colorado. The volume loss of evaporitic rocks by dissolution in the collapse center is estimated to be nearly 1700 km3 3 . Before ca. 10 Ma, Miocene basaltic flows partly covered an extensive, nearly horizontal, low-relief surface. Parts of this surface collapsed 1.3 km near the present-day Eagle and Colorado Rivers. Remnants of this surface outside the area of collapse, such as highlands of the White River uplift, the flank of the Gore Range, and Basalt Mountain, stand at elevations of 2.9–3.6 km. The high-standing Castle Peak basaltic cap, situated near the center of the Eagle collapse center, may not have collapsed, or collapsed little. The areas of collapse lie within or nearby known and inferred limits of the Pennsylvanian Eagle Valley Evaporite (mostly halite, gypsum, and anhydrite) that was deposited in the Central Colorado trough. Our geologic mapping and research in the Eagle collapse center delineate synclinal sags in the basaltic flows with amplitudes of 0.5–1 km, sinuous and discontinuous high-angle faults that cut basaltic flows, elongate grabens, evaporite-cored anticlines, and an ellipsoidal fault system that drops a 30 km X 10 km mountain block of younger strata into evaporite. Collapse as far as 20 km from the Colorado and Eagle Rivers suggests that the greater load on evaporite beneath surrounding highlands causes lateral flow of evaporite toward anticlinal crests in river valleys. Thus, gravity-driven evaporite flow and removal of evaporite by dissolution in groundwater and by subsequent discharge to surface waters combine to produce large-scale collapse. Although most evaporite tectonism post dates the basaltic flow capped surface, local angular unconformities under this surface record earlier, possibly Laramide evaporite tectonism, and overthickened post-evaporite red beds record some late Paleozoic evaporite deformation

Colorado↗
USGS2002

Evaporite tectonism in the lower Roaring Fork River valley, west-central Colorado

Evaporite tectonism in the lower Roaring Fork River valley in west-central Colorado has caused regional subsidence of a differentially downdropped area in the southern part of the Carbondale collapse center during the late Cenozoic. A prominent topographic depression coincides with this collapse area, and drainage patterns within the collapse area contrast sharply with those outside of it. Miocene volcanic rocks are downdropped as much as 1220 m in the collapse area. Much of the structural lowering occurred along the margins of the collapse area. Major Laramide-age structures bound the east and west sides of the collapse area, but movement on these structures during late Cenozoic collapse was in an opposite direction to their Laramide movement. Within the interior part of the collapse area faults and folds have as much as 300 m of structural relief. Large blocks of rock may be rafting into the Roaring Fork River valley as underlying evaporite flows toward the valley. Sinkholes are common in the collapse area, as are closed, or nearly closed, structurally controlled topographic depressions that are formed in both surficial deposits and bedrock. Upper Cenozoic deltaic and lacustrine deposits preserved on ridgelines and mesas document the positions of former structural depressions that were initially filled with sediments and later breached by erosion. At least 450 m of syn-collapse sediments accumulated in a collapse depression on the north side of Mount Sopris. Complexly deformed and brecciated deposits in the interior parts of the collapse center are interpreted as collapse debris. Evaporite flow is an important element in the collapse process, and during early stages of collapse it was perhaps the primary means of deformation. Flow by itself, does not remove evaporite from the collapse area. Dissolution and accompanying transport of dissolved constituents by groundwater and surface water are the ultimate means by which evaporite exits the collapse area. Collapse continues today, as evidenced by historic sinkholes and modern high-salinity loads in rivers and thermal springs. Thick evaporite deposits still underlie much of the collapse area, so collapse will likely continue in the future.

Colorado↗
USGS2000

Style and age of late Oligocene-early Miocene deformation in the southern Stillwater Range, west central Nevada: Paleomagnetism, geochronology, and field relations

Paleomagnetic and geochronologic data combined with geologic mapping tightly restrict the timing and character of a late Oligocene to early Miocene episode of large magnitude extension in the southern Stillwater Range and adjacent regions of west central Nevada. The southern Stillwater Range was the site of an Oligocene to early Miocene volcanic center comprising (1) 28.3 to 24.3 Ma intracaldera ash flow tuffs, lava flows, and subjacent plutons associated with three calderas, (2) 24.8 to 20.7 Ma postcaldera silicic dikes and domes, and (3) unconformably overlying 15.3 to 13.0 Ma dacite to basalt lava flows, plugs, and dikes. The caldera-related tuffs, lava flows, and plutons were tilted 60°-70° either west or east during the initial period of Cenozoic deformation that accommodated over 100% extension. Directions of remanent magnetization obtained from these extrusive and intrusive, caldera-related rocks are strongly deflected from an expected Miocene direction in senses appropriate for their tilt. A mean direction for these rocks after tilt correction, however, suggests that they were also affected by a moderate (33.4° ± 11.8°) component of counterclockwise vertical axis rotation. Paleomagnetic data indicate that the episode of large tilting occurred during emplacement of 24.8 to 20.7 Ma postcaldera dikes and domes. In detail, an apparent decrease in rotation with decreasing age of individual, isotopically dated bodies of the postcaldera group indicates that most tilting occurred between 24.4 and 24.2 Ma. The onset of tilting immediately following after the final caldera eruptions suggests that the magmatism and deformation were linked. Deformation was not driven by magma buoyancy, however, because tilting equally affected the caldera systems of different ages, including their plutonic roots. It is more likely that regional extension was focused in the southern Stillwater Range due to magmatic warming and reduction of tensile strength of the brittle crust. Faults that accommodated deformation in the southern Stillwater Range initially dipped steeply and cut deeply to expose more than 9 km of crustal section. The exposed crustal sections are probably rotated blocks above an unexposed basal detachment that lay near the early Miocene brittle-ductile transition.

Journal of Geophysical Research B: Solid Earth↗
USGS1999

Geophysical framework of the southwestern Nevada volcanic field and hydrogeologic implications

Gravity and magnetic data, when integrated with other geophysical, geological, and rock-property data, provide a regional framework to view the subsurface geology in the southwestern Nevada volcanic field. The region has been loosely divided into six domains based on structural style and overall geophysical character. For each domain, the subsurface tectonic and magmatic features that have been inferred or interpreted from previous geophysical work has been reviewed. Where possible, abrupt changes in geophysical fields as evidence for potential structural lithologic control on ground-water flow has been noted. Inferred lithology is used to suggest associated hydrogeologic units in the subsurface. The resulting framework provides a basis for investigators to develop hypotheses from regional ground-water pathways where no drill-hole information exists.

Nevada↗