Geology topics

Marisa M. Earll

Publications and source records attributed to Marisa M. Earll.

5 recordsLinked to original sources

USGS2026

Salinas Valley integrated hydrologic and reservoir operations models, Monterey and San Luis Obispo Counties, California

The area surrounding the Salinas Valley groundwater basin in Monterey and San Luis Obispo Counties of California is a highly productive agricultural area, contributes substantially to the local economy, and provides a substantial portion of vegetables and other agricultural commodities to the Nation. This region of California provides about half of the Nation’s lettuce, celery, broccoli, and spinach each year. Thus, this agricultural area provides substantial volumes of agricultural products not just for California but for the United States. Changes in population and increased agricultural development, which includes a shift toward more water-intensive crops, and climate variability, have put increasing demand on both surface-water and groundwater resources in the valley. This situation has resulted in water management challenges in the Salinas Valley that generally relate to the distribution of the water supply throughout the basin. Where and when the water is present in the surface and subsurface does not coincide with where and when the water is needed. Historically, to deal with the distribution issue, water has been used conjunctively in the valley. Conjunctive use is a water management strategy that coordinates surface-water and groundwater use to maximize water availability. Groundwater is used throughout the Salinas Valley to meet water demands when surface-water supplies are insufficient. The availability of surface water is constrained by climate. Precipitation and streamflow vary seasonally and year to year. Although there are two reservoirs in the Salinas Valley to capture and store water during wet periods, the only conveyance of reservoir water to coastal agricultural areas is the Salinas River. Increasing demand for groundwater and surface-water resources throughout the Salinas Valley has resulted in undesirable effects from unsustainable water use, such as surface-water depletion, groundwater-level declines, storage depletion in the principal aquifers, and seawater intrusion. To address these escalating issues, local communities, water management agencies, and groundwater sustainability agencies are evaluating how to sustainably manage both their surface-water and groundwater resources. To meet water demands and reduce the undesirable effects of unsustainable water use, continued conjunctive management of surface water and groundwater would ideally incorporate strategies to deal with increases in demand and climate variability. To evaluate the challenging water management issues in the Salinas Valley, the U.S. Geological Survey, Monterey County Water Resources Agency, and the Salinas Valley Basin Groundwater Sustainability Agency developed a comprehensive suite of models that represent the Salinas Valley hydrogeologic system called the Salinas Valley System Model. The geologic framework is known as the Salinas Valley Geologic Framework and was developed to characterize the subsurface using various topographic and geologic data sources, including information on hydrogeologic units, their surfaces and extents, geologic structures, lithology, and elevations from borehole data and cross sections, as well as details on faults and existing models. The surface-water model is called the Salinas Valley Watershed Model and simulates the Salinas River watershed. Monthly surface-water inflows into the integrated hydrologic model domain were simulated using the Salinas Valley Watershed Model. The historical model uses historical climate data, water and land use data, and reservoir releases to simulate agricultural operations, including landscape water demands, diversions, and reclaimed wastewater. The operational model adds an embedded reservoir operations framework to the simulation of the historical model that allows specified operational rules to simulate reservoir releases and changes in reservoir storage. The operational model assumes current reservoir operations and constant land use, which differs from historical conditions. Thus, the operational model is a hypothetical baseline model that can be used by local water managers to evaluate and quantify potential benefits of water supply projects. Together, the geologic framework, watershed, historical, and operational models form a tool that can be used to simulate irrigated agriculture and associated reservoir operations of the integrated hydrologic system of the Salinas Valley.

California↗

USGS2025

Application of Hydrologic Simulation Program—FORTRAN (HSPF) as part of an integrated hydrologic model for the Salinas Valley, California

The U.S. Geological Survey (USGS), in cooperation with the Monterey County Water Resources Agency, conducted studies to help evaluate the surface-water and groundwater resources of the Salinas Valley study area, consisting of the entire Salinas River watershed and several smaller, adjacent coastal watersheds draining into Monterey Bay. The Salinas Valley study area is a highly productive agricultural region that depends on the coordinated use of surface water and groundwater to meet demand for irrigation and public water supply. To continue to meet these demands, a better understanding of the historical water balance and the effects of water-resource development on the long-term sustainability of water resources in the Salinas Valley study area is needed.

California↗

USGS2024

Evaluating seawater intrusion forecast uncertainty under climate change in the Pajaro Valley, California

Climate change and climate variability impacts such as rising sea levels have the potential to exacerbate seawater intrusion and the strain on coastal freshwater resources in already stressed groundwater basins such as those in the Pajaro Valley groundwater basin, California. Regional hydrologic models are often coupled with climate projections to forecast future hydrologic conditions and inform adaptive resources management strategies. However, there is high uncertainty in the future projections of water resources due to uncertainties from downscaling global general circulation models (GCMs) to local scale climate change projections, future land use changes, and the inherent uncertainty of developed hydrologic models. Future climate projections and the magnitude of their influence on modeled hydrologic drivers are highly variable. Therefore, to develop a forecast model, an ensemble of different projections can be used to capture a wider range of basin responses and the associated uncertainties in the modeled forecasts. Understanding the reliability and uncertainty of forecasts is important for developing climate adaptation strategies such as developing protective thresholds, particularly at the basin scale where the impacts are felt, and adaptation is implemented. To demonstrate this, an uncertainty analysis of groundwater level and seawater intrusion forecasts for the Pajaro Valley groundwater basin was performed using an ensemble of three future climate projections with the Pajaro Valley Integrated Hydrologic Model (PVIHM) and the first-order second moment (FOSM) method. FOSM uncertainty analysis of hydrologic forecasts across a multi-GCM climate ensemble provides an upper and lower bound of potential impacts of climate change on sustainability targets related to mitigating seawater intrusion. The groundwater level forecasts’ narrow range of variability can help policymakers in adaptation planning by constraining possible outcomes to a focused range for risk-management decisions. However, less than one-third of groundwater level forecasts met the current protection thresholds to prevent chronic lowering of groundwater. Therefore, sustainability targets may need to be reassessed. Relative to groundwater level changes, the seawater intrusion forecasts had larger uncertainty due to the GCM climate projections and the simulated hydrologic response that were compounded by the propagation of scaling and bias from the GCMs and model simplifications in simulating the coastal boundary.

California↗

USGS2021

Detection and measurement of land-surface deformation, Pajaro Valley, Santa Cruz and Monterey counties, California, 2015–18

Land-surface deformation (subsidence) caused by groundwater withdrawal is identified as an undesirable result in the Pajaro Valley Water Management Agency’s Basin Management Plan and California’s Sustainable Groundwater Management Act. In Pajaro Valley, groundwater provides nearly 90 percent of the total water supply. To aid the development of sustainable groundwater management criteria, the U.S. Geological Survey, in cooperation with the Pajaro Valley Water Management Agency, performed an analysis of land-surface deformation (subsidence and uplift) in Pajaro Valley for 2015–18, using Interferometric Synthetic Aperture Radar and continuous Global Positioning System methods. Land-surface deformation results were then compared with subsurface geology and groundwater altitudes to better understand the hydromechanical response of the coastal aquifer system. The results indicate the land surface is generally stable with only small magnitudes (less than 1 inch) of seasonal land-surface deformation (subsidence in the summer and uplift in the winter) during 2015–18. During this time, the largest magnitude of land-surface deformation was less than 2 inches of subsidence and was localized in one area just north of the city limits of Watsonville, California. Groundwater altitudes during 2015–18 demonstrated seasonal variability and annual to multi-annual increases after reaching historical lows by the mid-1990s. The small magnitudes of land-surface deformation coupled with groundwater-altitude increases in most areas indicate that the subsidence likely is largely elastic and recoverable. The Corralitos-Pajaro Valley groundwater basin contains fine-grained (clay) sediments that have the potential for permanent aquifer-system compaction and resultant land subsidence. However, groundwater altitudes throughout the Pajaro Valley have increased above historical lows, and observed increases in groundwater altitudes coincided with changes in groundwater management activities. Observed relations between groundwater management activities and groundwater altitudes indicate that management of groundwater supplies could minimize the potential for permanent land-surface deformation in Pajaro Valley.

California↗

USGS2020

One-Water Hydrologic Flow Model: A MODFLOW based conjunctive-use simulation software

The U.S. Geological Survey’s (USGS) Modular Ground-Water Flow Model (MODFLOW-2005) is a computer program that simulates groundwater flow by using finite differences. The MODFLOW-2005 framework uses a modular design that allows for the easy development and incorporation of new features called processes and packages that work with or modify inputs to the groundwater-flow equation. A process solves a flow equation or set of equations. For example, the central part of MODFLOW is the groundwater-flow process that solves the groundwater-flow equation; the surface-water routing process is an additional process that solves the surface-water flow equation. Packages are code related to the groundwater-flow process. For example, the subsidence package modifies the groundwater-flow process by including aquifer compaction effects on flow. With the development of new packages and processes, the MODFLOW-2005 base framework diverged into multiple independent versions designed for specific simulation needs. This divergence limited each independent MODFLOW release to its specific purpose, so that there was no longer a single, comprehensive, general-purpose hydraulic-simulation framework. The MODFLOW One-Water Hydrologic Flow Model (MF-OWHM, also informally known as OneWater) is an integrated hydrologic flow model that combines multiple MODFLOW-2005 variants in one cohesive simulation software; changes were made to enable multiple capabilities in one code. This fusion of the MODFLOW-2005 versions resulted in a simulation software that can be used to address and analyze a wide class of conjunctive-use, water-management, water-food-security, and climate-crop-water scenarios. As a second core version of MODFLOW-2005, MF-OWHM maintains backward compatibility with existing MODFLOW-2005 versions, with features that include the following: Process-based simulation. Saturated groundwater flow (three-dimensional). Surface-water flow (one- and two-dimensional). Stream and river flow. Lake and reservoir storage. Landscape simulation and irrigated agriculture. Land-use and crop simulation. Root uptake of groundwater. Actual evapotranspiration. Estimated irrigation demand. Reservoir operations. Aquifer compaction and subsidence by vertical model-grid deformation. Seawater intrusion by a sharp-interface assumption. Karst-aquifer and fractured-bedrock flow. Turbulent and laminar-pipe network flow. Unsaturated groundwater flow (one-dimensional). Internal linkages among the processes that couple hydraulic head, flow, and deformation. Redesigned code for faster simulation, increased user-input options, easier model updates, and more robust error reporting than in previous models. MF-OWHM is a MODFLOW-2005 based integrated hydrologic model that can simulate and analyze varying environmental conditions to allow for the evaluation of management options from many components of human and natural water movement through a physically based, supply and demand framework. The term “integrated,” in the context of this report, refers to the tight coupling of groundwater flow, surface-water flow, landscape processes, aquifer compaction and subsidence, reservoir operations, and conduit (karst) flow. Another benefit of this integrated hydrologic model is that models developed to run by MODFLOW-2005, MODFLOW-NWT, MODFLOW-CFP, or MODFLOW-FMP can also be simulated with MF-OWHM. At the time of this report’s publication, MF-OWHM version 2 (MF-OWHM2) does not include a direct internal simulation of snowmelt, advanced mountainous watershed rainfall-runoff simulation, detailed shallow soil-moisture accounting, or atmospheric moisture content. Atmospheric moisture may be accounted for indirectly by, optionally, specifying a pan-evaporation rate, reference evapotranspiration, and precipitation. These features are not included to ensure that simulation runtime remains short enough to enable the use of automated methods of calibrating model parameters to field observations, which typically require many simulation model runs. The MF-OWHM approach is to include as much detail as possible to simulate hydrological processes, providing the simulation runtimes remain reasonable enough to allow for robust parameter estimation and model calibration. To represent both natural and human-influenced flow, MF-OWHM integrates physically based flow processes derived from MODFLOW-2005 in a supply and demand framework. From this integration, the physically based movement of groundwater, surface water, imported water, and precipitation serve as supply to meet consumptive demands associated with irrigated and non-irrigated agriculture, natural vegetation, and urban water uses. Water consumption is determined by balancing the available water supply with water demand, leading to the concept of a demand-driven, supply-constrained simulation. The MF-OWHM Supply-and-Demand Framework is especially useful for the analysis of agricultural water use, where there are often few data available to describe changes in land-use through time, such as crop type and distribution, and the associated changes in groundwater pumpage. This framework attempts to satisfy each land-use water demand with available water supplies—that is, groundwater uptake, precipitation, and irrigation. An option provided in MF-OWHM2 is to automatically increase groundwater pumping for irrigation, which often is unknown, by the calculated residual between demand and the other available sources of supply. From large- to small-scale applications, the physically based supply and demand framework provides key capabilities for simulating and analyzing historical, current, and future conjunctive-use of surface water and groundwater. To achieve the physically based supply and demand framework, the MODFLOW-2005 standard of no inter-package and -process communication was relaxed for MF-OWHM2. Traditional MODFLOW simulation models required that all packages and processes interact through the groundwater-flow equation or by removing the water flow from the simulation domain. For example, the MODFLOW-2005 representation of a groundwater well extracts water from the groundwater-flow equation (by subtraction) and removes it from the simulation domain. This feature is available in the MF-OWHM framework, but options have been added to allow the specification of a use or destination of pumped groundwater within the model domain, for example, it can be used for irrigation, managed aquifer recharge, or return-flow to streams.

Techniques and Methods↗