Geology ReportsSearch

Geology topics

M. L. Merritt

Publications and source records attributed to M. L. Merritt.

9 recordsLinked to original sources

Recovering fresh water stored in saline limestone aquifers

Numerical modeling techniques are used to examine the hydrogeologic, design, and management factors governing the recovery efficiency of subsurface fresh-water storage. The modeling approach permitted many combinations of conditions to be studied. A sensitivity analysis was used that consisted of varying certain parameters while keeping constant as many other parameters or processes as possible. The results show that a loss of recovery efficiency resulted from: 1) processes causing mixing of injected fresh water with native saline water (hydrodynamic dispersion); 2) processes or conditions causing the irreversible displacement of the injected fresh water with respect to the well (buoyancy stratification and background hydraulic gradients); or 3) processes or procedures causing injection and withdrawal flow patterns to be dissimilar (dissimilar injection and withdrawal schedules in multiple-well systems). Other results indicated that recovery efficiency improved considerably during the first several successive cycles, provided that each recovery phase ended whgen the chloride concentration of withdrawn water exceeded established criteria for potability (usually 250 milligrams per liter). Other findings were that fresh water injected into highly permeable or highly saline aquifers would buoy rapidly with a deleterious effect on recovery efficiency. -Author

Ground Water

Simulation of the interaction of karstic lakes Magnolia and Brooklyn with the upper Floridan Aquifer, southwestern Clay County, Florida

The stage of Lake Brooklyn, in southwestern Clay County, Florida, has varied over a range of 27 feet since measurements by the U.S. Geological Survey began in July 1957. The large stage changes have been attributed to the relation between highly transient surface-water inflow to the lake and subsurface conduits of karstic origin that permit a high rate of leakage from the lake to the Upper Floridan aquifer. After the most recent and severe stage decline (1990-1994), the U.S. Geological Survey began a study that entailed the use of numerical ground-water flow models to simulate the interaction of the lake with the Upper Floridan aquifer and the large fluctuations of stage that were a part of that process. A package (set of computer programs) designed to represent lake/aquifer interaction in the U.S. Geological Survey Modular Finite-Difference Ground-Water Flow Model (MODFLOW-96) and the Three-Dimensional Method-of-Characteristics Solute-Transport Model (MOC3D) simulators was prepared as part of this study, and a demonstration of its capability was a primary objective of the study. (Although the official names are Brooklyn Lake and Magnolia Lake (Florida Geographic Names), in this report the local names, Lake Brooklyn and Lake Magnolia, are used.) In the simulator of lake/aquifer interaction used in this investigation, the stage of each lake in a simulation is updated in successive time steps by a budget process that takes into account ground-water seepage, precipitation upon and evaporation from the lake surface, stream inflows and outflows, overland runoff inflows, and augmentation or depletion by artificial means. The simulator was given the capability to simulate both the division of a lake into separate pools as lake stage falls and the coalescence of several pools into a single lake as the stage rises. This representational capability was required to simulate Lake Brooklyn, which can divide into as many as 10 separate pools at sufficiently low stage. In the first of two calibrated models, recharge to the water table, specified as a monthly rate, was set equal to 40 percent of the monthly rainfall rate. The specified rate of inflow to the uppermost stream segment was set equal to outflows from Lake Lowry estimated from lake stage and the 1994-97 rating table. Leakage to the intermediate and Upper Floridan aquifers was assumed to occur from the surficial aquifer system through the confining layers directly beneath deeper parts of the lake bottom. A leakance coefficient value of 0.001 feet per day per foot of thickness was used beneath Lake Magnolia, and a value of 0.005 feet per day per foot of thickness was used beneath most of Lake Brooklyn. With these values, the conductance through the confining layers beneath Lake Brooklyn was about 19 times that beneath Lake Magnolia. The simulated stages of Lake Brooklyn matched the measured stages reasonably well in the early (1957-72) and later (1990-98) parts of the simulation time period, but the match was unsatisfactory in an intermediate time period (1973-89). To resolve this discrepancy, the hypothesis was proposed that undocumented losses of water from Alligator Creek upstream from Lake Brooklyn or from the lake itself occurred between 1973 and 1989 when there was sufficient streamflow. The resulting simulation of lake stages matched the measured lake stages accurately during the entire simulation time period. The model was then revised to incorporate the assumption that only 20 percent of precipitation recharged the water table (the second calibrated model). Recalibration of the model required that leakance values for the confining units under deeper parts of the lakes also be reduced by nearly 50 percent. The stages simulated with the new parameter assumptions, but retaining the assumption of surface-water losses, were an excellent match of the measured values. The stage of Lake Magnolia was also simulated accurately. The results of sensitivity analyses show that simulated streamflow between Lakes Magnolia and Brooklyn tends to be water-budget controlled, and is not appreciably affected by the specified outflow altitude or channel characteristics of the receiving stream. To match heads measured in observation wells of the surficial aquifer network, the assigned hydraulic conductivity values were zoned, and ranged from a minimum of 4 feet per day to a maximum of 400 feet per day in the first calibrated model. These values were reduced by about 50 percent in the second calibrated model. Differences between observation wells were noted in the abruptness of changes of measured head values, and in the relation of the timing of peak measured heads and simulated peak heads. These differences seemed to be correlated with the depth of the water table below land surface. Spatially uniform values of transmissivity were specified for the intermediate (10,000 feet squared per day) and Upper Floridan (100,000 feet squared per day) aquifers. Simulated heads in the Upper Floridan aquifer layer follow the trend of the heads measured in a long-term observation well with data beginning in 1960. This result suggests that the observed head decline could be explained entirely in terms of the stage decline in Lake Brooklyn and may not indicate a regional trend.

Florida

Assessment of saltwater intrusion in southern coastal Broward County, Florida

Of the counties in southeastern Florida, Broward County has experienced some of the most severe effects of saltwater intrusion into the surficial Biscayne aquifer because, before 1950, most public water-supply well fields in the county were constructed near the principal early population centers located less than 5 miles from the Atlantic Ocean. The construction of major regional drainage canals in the early 20th century caused a lowering of the water table and a gradual inland movement of the saltwater front toward the well fields. The U.S. Geological Survey began field investigations of saltwater intrusion in the Biscayne aquifer of southeastern Broward County in 1939. As part of the present study, the positions of the saltwater front in 1945, 1969, and 1993 were estimated using chloride concentrations of water samples collected between 1939 and 1994 from various monitoring and exploratory wells. The data indicate that, between 1945 and 1993, the saltwater front has moved as much as 0.5 mile inland in parts of the study area. The position and movement of the saltwater front were simulated numerically to help determine which of the various hydrologic factors and water-management features characterizing the coastal subsurface environment and its alteration by man are of significance in increasing or decreasing the degree of saltwater intrusion. Two representational methods were applied by the selection and use of appropriate model codes. The SHARP code simulates the position of the saltwater front as a sharp interface, which implies that no transition zone (a zone in which a gradational change between freshwater and saltwater occurs) separates freshwater and saltwater. The Subsurface Waste Injection Program (SWIP) code simulates a two-fluid, variable-density system using a convective-diffusion approach that includes a representation of the transition zone that occurs between the freshwater and saltwater bodies. The models were applied to: (1) approximately replicate predevelopment and current positions of the interface in the study area; and (2) study the relative importance of various factors affecting the interface position. The model analyses assumed a conceptual model of uniform easterly flow in the aquifer toward points of offshore discharge to tidewater. Measurements of water-table altitude and the depth to the interface in the study area exhibit an interrelation that differes substantially from the classical Ghyben-Herzberg relation. However, both model codes simulated water-table altitudes and interface positions that were generally consistent with the Ghyben-Herzberg relation but differed substantially from observed data. The simulate interface positions were inland of the known positions, and simulate water-table altitudes were higher than measured ones. The SHARP and SWIP simulations were in general agreement with each other when a low value of longitudinal dispersivity was specified in the SWIP simulation and also for higher values of longitudinal dispersivity when modified dispersion algorithms were used in SWIP that greatly reduced the simulated degree of vertical dispersion. Sensitivity analyses performed using the SHARP code indicated simulation results to be relatively insensitive to a substantial change in the specified slope of the base of the aquifer and moderately sensitive to a 150-percent change in net atmospheric recharge to the aquifer (rainfall minus evapotranspiration). Representing well-field pumping by the City of hallandale had only a minor, localized influence on the simulated regional interface position. Using various cross-sectional grid designs in applications of the SWIP code, near convergence of all lines of equal concentrations in the transition zone was achieved within a simulation time of 10 years. The simulated equilibrium interface location was sensitive to substantial spatial variations in the specified hydraulic conductivity values, but was relatively insensitive to seasonal varying

Florida

Simulation of the water-table altitude in the Biscayne Aquifer, southern Dade County, Florida, water years 1945-89

A digital model of the flow system in the highly permeable surficial Biscayne aquifer of southern Dade County, Florida, was constructed for the purposes of better understanding processes that influence the flow system and of supporting the construction of a subregional model of the transport of brackish water from a flowing artesian well. Problems that needed resolution in this endeavor included the development of methods to represent the influence of flowing surface water in seasonally inundated wetlands and the influence of a network of controlled canals developed in stages during the simulation time period (water years 1945-89). An additional problem was the general lack of natural aquifer boundaries near the boundaries of the study area. The model construction was based on a conceptual description of the Biscayne aquifer developed from the results of previous U.S. Geological Survey investigations. Modifications were made to an existing three-dimensional finite-difference simulator of ground-water flow to enable an upper layer of the grid to represent seasonally occurring overland sheetflow in a series of transient simulations of water levels from 1945 to 1989. A rewetting procedure was developed for the simulator that permitted resaturation of cells in this layer when the wet season recurred. An "equivalent hydraulic conductivity" coefficient was assigned to the overland flow layer that was analogous, subject to various approximations, to the use of the Manning equation. The surficial semiconfining peat and marl layers, levees, canals, and control structures were also represented as part of the model grid with the appropriate choices of hydraulic coefficient values. For most of the Biscayne aquifer grid cells, the value assigned to hydraulic conductivity for model calibration was 30,000 feet per day and the value assigned to porosity was 20 percent. Boundary conditions were specified near data sites having long-term records of surface-water stages or water-table altitudes, and modifications to the simulator permitted the specification of time-varying pressures at boundary grid cells. Rainfall data from a station in Homestead generally were used as an areally uniform rainfall specification throughout the modeled region. Maximum evapotranspiration rates ranged seasonally from a minimum of 0.08 inch per day in January to a maximum of 0.21 inch per day between June and October. Shallow-root and deep-root zone depths for the evapotranspiration calculation were 3 and 20 feet in the coastal ridge and were 0.10 and 5 feet in the glades regions where peat and marl covers occurred. Results of sensitivity analyses indicated that the simulations of stages and water levels were relatively unresponsive to 50 percent changes in aquifer hydraulic conductivity, porosity, and the equivalent hydraulic conductivity of overland flow. However, 20 percent changes in rainfall and maximum evapotranspiration rates produced significantly different water levels, as did interchange of coastal ridge and glades deep-root zone (extinction) depths. Water levels were simulated very well at most measurement sites. Sensitivity analyses illustrated the significant influence of the uncontrolled agricultural drainage canals on pre-1968 regional water levels and the further influence of Black Creek Canal in draining a region of high water after 1961. Other analyses indicated that the flood-control system of 1968-82 lowered peak water levels in the affected region by as much as 1.5 feet in the wet summers of 1968, 1969, and 1981, and that Levee 67 Extended channeled flows from the S-12 spillway structures and raised overland flow stages in Shark River Slough. Hypothetical scenarios of well-field pumping in the vicinity of Levee 31N indicated that the pumping induced a significant amount of recharge from the adjacent borrow canal, the degree of which depended on the distance between the canal and the well field. The computed ratio of evapotranspiration to rainfall recharge ranged from 88 to 94 percent during water years 1945-82. The ratio increased to about 97.9 percent during water years 1983-89, possibly because of changing water-management practices and deficient rainfall.

Florida

Aspects of numerical and representational methods related to the finite-difference simulation of advective and dispersive transport of freshwater in a thin brackish aquifer

The simulation of the transport of injected freshwater in a thin brackish aquifer, overlain and underlain by confining layers containing more saline water, is shown to be influenced by the choice of the finite-difference approximation method, the algorithm for representing vertical advective and dispersive fluxes, and the values assigned to parametric coefficients that specify the degree of vertical dispersion and molecular diffusion that occurs. Computed potable water recovery efficiencies will differ depending upon the choice of algorithm and approximation method, as will dispersion coefficients estimated based on the calibration of simulations to match measured data. A comparison of centered and backward finite-difference approximation methods shows that substantially different transition zones between injected and native waters are depicted by the different methods, and computed recovery efficiencies vary greatly. Standard and experimental algorithms and a variety of values for molecular diffusivity, transverse dispersivity, and vertical scaling factor were compared in simulations of freshwater storage in a thin brackish aquifer. Computed recovery efficiencies vary considerably, and appreciable differences are observed in the distribution of injected freshwater in the various cases tested. The results demonstrate both a qualitatively different description of transport using the experimental algorithms and the interrelated influences of molecular diffusion and transverse dispersion on simulated recovery efficiency. When simulating natural aquifer flow in cross-section, flushing of the aquifer occurred for all tested coefficient choices using both standard and experimental algorithms.

Journal of Hydrology

Digital simulation of the regional effects of subsurface injection of liquid waste near Pensacola, Florida

Industrial, organic, liquid waste has been injected into a part of the lower limestone of the Floridan aquifer at one site since 1963 and at another site since 1975, raising water levels in the injection zone throughout a large region. The hydrogeologic conceptual model of the injection zone is a layer tightly confined above by a thick layer of clay and in which lateral hydraulic conductivity decreases rapidly below the upper 60 feet. Recharge areas are to the north and east, where the confining layer pinches out. There appear to be permeability barriers to the northwest, west, and southwest due to facies changes, faults, or pinchouts. Measured and reconstructed preinjection water levels suggested that flow in the aquifer is from the northern recharge areas toward the southeast. A steady-state model simulation incorporating the cited boundary assumptions approximately simulated this pattern. A two-dimensional flow model and the subsurface waste injection program (SWIP) were calibrated to simulate the water level increases at various monitor wells since 1963. Sensitivity analyses showed the simulations to be quite sensitive to moderate errors in either transmissivity or storage parameter specifications. The predictive use of the hydraulic model is understood to be restricted to the geographical locations of data used for model calibration. (USGS)

Water-Resources Investigations Report

A description of the index of active Florida water data collection stations and a user's guide for station or site information retrieval using computer program Findex H578

A computerized index of water-data collection activities and retrieval software to generate publication list of this information was developed for Florida. This system serves a vital need in the administration of the many and diverse water-data collection activities. Previously, needed data was very difficult to assemble for use in program planning or project implementation. Largely descriptive, the report tells how a file of computer card images has been established which contains entries for all sites in Florida at which there is currently a water-data-collection activity. Entries include information such as identification number, station name, location, type of site, county, information about data collection, funding, and other pertinent details. The computer program FINDEX selectively retrieves entries and lists them in a format suitable for publication. Updating the index is done routinely. (Woodard-USGS)

Open-File Report