Geology ReportsSearch

Geology topics

Lukas Zurcher

Publications and source records attributed to Lukas Zurcher.

8 recordsLinked to original sources

Porphyry copper potential of the U.S. Southern Basin and Range using ASTER data integrated with geochemical and geologic datasets to assess potential near-surface deposits in well-explored permissive tracts

ArcGIS was used to spatially assess and rank potential porphyry copper deposits using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data together with geochemical and geologic datasets in order to estimate undiscovered deposits in the southern Basin and Range Province in the southwestern United States. The assessment was done using a traditional expert opinion three-part method and a prospectivity model developed using weights of evidence and logistic regression techniques to determine if ASTER data integrated with other geologic datasets can be used to find additional areas of prospectivity in well-explored permissive tracts. ASTER hydrothermal alteration data were expressed as 457 alteration polygons defined from a low-pass filtered alteration density map of combined argillic, phyllic, and propylitic rock units. Sediment stream samples were plotted as map grid data and used as spatial information in ASTER polygons. Gravity and magnetic data were also used to define basins greater than 1 km in depth. Each ASTER alteration polygon was ranked for porphyry copper potential using alteration types, spatial amounts of alteration, stream sediment geochemistry, lithology, polygon shape, proximity to other alteration polygons, and deposit and prospects data. Permissive tracts defined for the assessment in the southern Basin and Range Province include the Laramide Northwest, Laramide Southeast, Jurassic, and Tertiary tracts. Expert opinion estimates using the three-part assessment method resulted in a mean estimate of 17 undiscovered porphyry copper deposits, whereas the prospectivity modeling predicted a mean estimate of nine undiscovered deposits. In the well-explored Laramide Southeast tract, which contains the most deposits and has been explored for over 100 years, an average of 4.3 undiscovered deposits was estimated using ASTER alteration polygon data versus 2.8 undiscovered deposits without ASTER data. The Tertiary tract, which contains the largest number of ASTER alteration polygons not associated with known Tertiary deposits, was predicted to contain the most undiscovered resources in the southern Basin and Range Province.

Economic Geology

Mapa metalogenético de América Central y El Caribe

La Asociación de Servicios Geológicos y Mineros de Iberoamérica (ASGMI), bajo los auspicios de la Comisión de la Carta Geológica del Mundo (CCGM) preparó la primera versión del Mapa Metalogénico de América Central y el Caribe. La coordinación general estuvo a cargo del Servicio Geológico Minero Argentino (SEGEMAR), con tres coordinaciones regionales: América Central a cargo del Servicio Geológico Mexicano (SGM), las islas del Caribe a cargo del Servicio Geológico Nacional de la República Dominicana y el norte de América del Sur a cargo del Servicio Geológico Colombiano. Participaron además los Servicios Geológicos, Direcciones de Minería u organismos equivalentes de los países involucrados, que designaron Coordinadores Nacionales. El proyecto fue presentado y aprobado en ocasión de la Asamblea de ASGMI realizada en La Habana (Cuba) en 2017. Posteriormente fue presentado ante la Comisión de la Carta Geológica del Mundo (CCGM) en París en 2018. Los objetivos, criterios metodológicos y cronograma de trabajo fueron así establecidos. En los años 2018 y 2019 se realizaron dos reuniones de los participantes, una en Santo Domingo, República Dominicana, y otra en Tegucigalpa, Honduras. Los avances del mapa fueron presentados durante la Reunión Santo Domingo de 2018 y en ocasión del XV Simposio IAGOD, celebrado en Salta (Argentina) ese mismo año. El mapa fue generado digitalmente a partir del Mapa Estructural del Caribe (Bouysse et al., 2020), provisto por la Comisión de la Carta Geológica del Mundo, realizándose una actualización de la información geológica, a partir de la bibliografía citada en el texto. Los polígonos fueron reclasificados y reagrupados en orden a definir unidades tectonoestratigráficas y mejor reflejar la metalogénesis de la región.

Servicio Geológico Minero Argentino, Anales

Tectono-magmatic evolution of porphyry belts in the central Tethys region of Turkey, the Caucasus, Iran, western Pakistan, and southern Afghanistan

Exploration in the central Tethys region of Turkey, Armenia, Azerbaijan, Georgia, Iran, and weste rn Pakistan has led to the identification of the giant Reko Diq (24 Mt Cu and 1300 t Au), Sar Cheshmeh (8.9 Mt Cu and 0.46 Mt Mo), Sungun (5.1 Mt Cu and 0.20 Mt Mo), and Kadjaran (4.6 Mt Cu, 0.94 Mt Mo, and 1100 t Au), and 10 other large (1–2 Mt Cu) porphyry deposits including Saindak, Cevizlidere, Teghout, Meiduk, and Halilağa. Continued exploration efforts have also resulted in the development of porphyry-related gold deposits such as Kişladağ (9.6 Moz Au), Çöpler (3.7 Moz Au), Aği Daği (1.7 Moz Au), and Sary Gunay (3.0 Moz Au), and in the generation of several other promising exploration projects. The distribution in space and time of porphyry deposits in the central Tethys region was shaped by complex pre- to post-mineral tectonic, igneous, collisional, uplift and burial events. These events are represented by a partially-overlapping and variably exhumed and covered collage of twenty-six Early Jurassic to Holocene magmatic belts permissive for the occurrence of porphyry deposits (porphyry tracts and sub-tracts). Twelve tracts or sub-tracts are characterized by compressional continental arcs that formed on drifting terranes or continental margins, 10 developed in compressional to extensional intra-oceanic arc and backarc-rift settings, and 4 formed in extensional post-collisional environments over amalgamated terranes. Eight of these belts were variably affected by coeval and younger metamorphic, fold-and-thrust, and extensional faulting events. Fifty-four porphyry Au-(Cu), Cu-Au, Cu-Mo, Mo-Cu deposits, 15 porphyry-related Au, Au-(Mo) and W-(Mo-Au) deposits, 239 porphyry prospects, and 68 other porphyry-related mineral sites were identified in the study region. Of the 376 porphyry and porphyry-related sites, about 11% formed in island arc, 42% in continental arc, 20% in backarc, and 27% in post-collisional settings. Of the 69 porphyry and porphyry-related deposits, 7% developed in intra-oceanic arc, 41% in continental arc, 27% in backarc, and 25% in post-collisional settings. The largest occur in either compressional continental arc (18 deposits including the Reko Diq and Sar Cheshmeh giants) or post-collisional (13 deposits including the Kadjaran and Sungun giants) environments. Ninety percent of the largest porphyry or porphyry-related deposits occur in only 9 of the 26 permissive porphyry tracts or sub-tracts. Moreover, 88, 90, and 77% of the identified Cu, Mo, and Au resources are contained in porphyry deposits that occur in only 4 of these 9 tracts. Of these 4 tracts, 3 outline arc settings, and one delimits a post-collisional environment. The compositional diversity of porphyry intrusions in these tectono-magmatic environments generally varies from island arc settings with the most restricted range (partly alkaline but mainly calc-alkaline dioritic to granodioritic-tonalitic), to continental arc (calc-alkaline dioritic-quartz dioritic, granodioritic, quartz monzonitic-granitic, and less commonly mildly alkaline), to backarc (mildly alkaline and calc-alkaline dioritic to granitic), to post-collisional settings with the most expansive range (alkaline and calc-alkaline mafic to felsic, and weakly peraluminous). Metal associations also vary broadly as a function of porphyry intrusion composition from weakly peraluminous to metaluminous felsic (Mo[±W ± Cu]; <2% of porphyry-related systems [i.e., Tyrnyauz]), to metaluminous felsic and intermediate (Cu-Mo[±Au]; 85% [i.e., Cevizlidere, Haft Cheshmeh, Kahang, Sar Cheshmeh, Sungun, Teghout, Reko Diq, Saindak]), to mildly alkaline felsic and intermediate (Cu-Au[±Mo] [i.e., Agarak, Kadjaran, Kale Kafi]) and mafic (Au-Cu; 12% [i.e., Çöpler]), and to alkaline felsic (Au-Mo; 1% of porphyry-related systems [i.e., Kişladağ). Tectonic changes were critical in triggering the formation of large porphyry deposits in the region. Large porphyry deposits were preferentially emplaced in continental arc settings shortly before major collisional events (Dar Alu, Kahang, Meiduk, Now Chun, and the giant Sar Cheshmeh and Reko Diq deposits), or in post-subduction environments shortly after collision (Bakirçay, Güzelyayla, Haft Cheshmeh, Masjed Daghi, and the giant Kadjaran and Sungun deposits) or during periods of prominent extension (Aği Daği, Halilağa, Kişladağ, Sari Gunay, and Zarshuran porphyry-related deposits). Collision-induced uplift, erosion, and removal of coeval volcanic rocks favorably exposed the hypabyssal level of subduction-related porphyry deposits. Extensional structures that developed parallel and orthogonal to the compressional principal stress component along transtensional or transpressional strike-slip faults or in pull-apart basins commonly controlled porphyry-related deposits in post-collisional settings. The latter deposits typically exhibit shallow epithermal levels of emplacement because of preservation by burial. Seventeen porphyry deposits and one porphyry-related deposit in the study region are reported to contain significant supergene resources. Relatively mature levels of secondary copper enrichment in dominantly granodioritic to granitic porphyry deposits occur in areas where large pyrite-rich quartz-sericite alteration zones have been preserved and exposed to surface oxidation (Güzelyayla and Ulutaş in northeastern Turkey; Agarak, Ankavan, Dastakert, Kadjaran, and Teghout in Armenia; Ali Javad in northern Iran; Kale Kafi in central Iran; Darreh Zar, Meiduk, Now Chun, and Sar Cheshmeh in southeastern Iran; and Tanjeel in southwestern Pakistan). Chalcocite blankets also developed over porphyry deposits in regions where significant post-mineral faulting has occurred (Muratdere and Sarıçayıryayla in western Turkey). Normal faulting also enhanced secondary enrichment of gold in the Halilağa porphyry and Sary Gunay porphyry-related deposits located respectively in western Turkey and northern Iran. Evaluation of provincial as well as local controls strongly suggests that continued exploration in the region will lead to the identification of additional porphyry and porphyry-related deposits. These deposits will likely be found under younger cover formations in porphyry belts that are already known, and in association with superjacent high- and intermediate-sulfidation epithermal deposits, or increasingly peripheral skarn, carbonate-replacement, and sediment-hosted deposits. Application of suitable exploration techniques to detect concealed and/or deformed deposits in porphyry belts that remain under-explored may also prove productive.

Tethys region

Probabilistic mineral resource assessment of U.S. Territories of the Caribbean Basin and adjacent areas: Progress report

The U.S. Geological Survey is partnering with the IberoAmerican Association of Geological and Mining Surveys (ASGMI) to conduct an assessment of undiscovered metallic and non-metallic resources in the Greater Antilles region. The assessment plans to provide science-based information on the geologic availability of these resources for development, land-use planning, and decision making. The USGS anticipates contributing information generated for the Greater Antilles assessment project to the concurrent ASGMI project “Metallogenetic Map of Central America and the Caribbean”. ASGMI, in turn, anticipates contributing expertise on the metallogeny of the region to the USGS assessment project. For this purpose, the USGS plans to conduct a workshop on assessment methodology to support ASGMI’s participation in the probabilistic estimation of undiscovered deposits. Both projects stand to benefit significantly from this collaborative effort.

US Virgin Islands, Puerto Rico

New method to integrate remotely sensed hydrothermal alteration mapping into quantitative mineral resource assessments

Hydrothermal alteration data mapped using the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were compiled into hydrothermal alteration polygons for use in an assessment of porphyry copper mineral resource potential in the southwestern United States. Hydrothermal alteration polygons along with geochemistry, gravity and magnetic, lithologic, and deposit and prospects data were compiled in a GIS to produce a quantitative set of physical properties for each polygon that were effectively used in making estimates of undiscovered deposits for each permissive tract. Results show a higher estimate of potential undiscovered deposits (17 vs 14) for permissive tracts when ASTER alteration data were used in the assessment.

Conference Paper

Preliminary assessment of porphyry copper deposits in the Sierra Maestra, Cuba

The U.S. Geological Survey’s “three-step” form of mineral-resource assessment was used to obtain a preliminary estimate of copper resources in undiscovered porphyry deposits of the Paleogene Sierra Maestra Arc. Results of this preliminary assessment suggest that a mean of 3.2 undiscovered deposits are likely present. This estimate is comparable to results from an independently-derived porphyry deposit density model, which points to 3.9 undiscovered deposits. Monte Carlo simulation results further show that the mean estimate of undiscovered copper resources in this porphyry copper tract is in the order of 12 million metric tons. Notwithstanding having been a relatively short-lived (20-25 Ma) magmatic event, the Sierra Maestra Arc was a particularly favorable environment for the formation of porphyry copper deposits.

Conference Paper

Tectono-magmatic evolution and distribution of porphyry Cu systems in the Central Tethys Region of Turkey, the Caucasus, Iran, and southern Pakistan

Recent compilation of geodynamic, geochemical, geochronologic, and ore deposits data provided an opportunity to review the continental margin, intra-oceanic, and post-collisional tectonic settings in the Central Tethys Region. These settings formed during sequential rifting of microcontinents from the passive margin of Gondwana, their northward transport across the Neo-Tethys Ocean, and their collision with the active margin of Eurasia.

Tethys region

Porphyry copper and other intrusion-related mineralization in Mexico

Intrusion-related copper-bearing ore deposits in Mexico span a wide-range of deposit types and geological settings and formed from the mid-Mesozoic through the Holocene. These deposits include world-class copper porphyry and skarn deposits as well as a continuum of similar skarn, porphyry, vein, and replacement deposits that contain variable quantities of molybdenum, zinc, silver, lead, iron, gold, tungsten, tin, fluorine, and beryllium. Based on a new compilation, this paper reviews data on the full spectrum of intrusion-related deposits, concentrating on copper-rich systems, and attempts to place them in a generalized geological and petrological context. In Mexico, intrusion-related mineral deposits are primarily Mesozoic to middle Tertiary in age. Three broad periods are prominent in the mineralization record: the late Mesozoic, the Laramide, and the middle Tertiary. Jurassic to Late Cretaceous calc-alkalic batholiths with sparse volcanic rocks occur along the Pacific margin mainly on eugeoclinal crust, although locally on continental crust (for example, in Sonora). Latest Cretaceous to Early Tertiary ('Laramide') calc-alkalic batholithic, subvolcanic, and volcanic centers occur in an overlapping but somewhat more easterly band that extends with diminished intensity and somewhat younger ages into the Sierra Madre Oriental. Mid-Tertiary volcanism and local intrusive centers are widely developed, with the greatest abundance of calcalkalic felsic volcanics in the Sierra Madre Occidental and more mafic middle to late Tertiary arc volcanics in the Sierra Madre del Sur in southern Mexico and as a fringe of alkalic volcanic' and sub volcanic centers in northeastern Mexico. Over 600 copper-rich intrusion-related systems can be inferred from the literature; about 100 can be documented with some confidence. Copper-rich deposits occur with both intermediate (dioritic) and felsic (granodioritic) intrusive centers and show a corresponding variety of associated metals and alteration types. Styles include porphyry-type disseminated or stockwork mineralization, skarn, breccia pipes, and pegmatites. Multiple styles commonly occur in the same district. Porphyry copper deposits are best developed in association with the Laramide intrusive centers of northern Mexico and the mid-Tertiary intrusions in southern Mexico. Other intrusion-related deposit types occur within the same magmatic framework, but they have different temporal and spatial correlations related to their igneous composition and exposure level. The continuum of intrusion-related mineralization in Mexico can be divided by geological associations, metal contents, and styles of alteration. Although more than 1,500 intrusion-associated mineral deposits are known, the scarcity of data requires a simplified approach focusing on major districts. We distinguish the following overlapping groups of deposits based on their metal contents and igneous compositions: (1) porphyry or skarn Cu(-Mo-Zn) associated with intermediate to felsic granitoids, (2) porphyry or skarn Cu (-Au-Fe) associated with intermediate intrusions, (3) greisen, skarn, or pegmatite W(-Mo) associated with intermediate to felsic granitoids, (4) replacement or skarn Zn-Pb-Ag(-Cu-F) deposits associated with felsic intrusions, (5) volcanic-hosted vein Ag-Au(-Zn-F-Sn) deposits associated with hypabyssal felsic intrusions, (6) vein ± replacement Ag-Au(-Cu-Zn-Pb) deposits associated with intermediate stocks, (7) volcanichosted Au-Ag(-Cu) systems, (8) rhyolite-related F(-Sn-Be) deposits, (9) diorite-related Fe(-Au-Cu) skarns, and (9) rhyolite-related Fe deposits. Some inferences can be drawn from examination of these patterns: • Igneous compositions vary in time and space in Mexico, but multiple compositions commonly were emplaced at different times in the same region. Temporal variations (as in Sonora) are as important as differences in province (as between Sonora and southern Mexico). • Alteration and metal differences between alkaline and sub alkaline, felsic and mafic magma suites can be partly rationalized from equilibria among igneous minerals (for example, in terms of a Al 2 O 3 vs a CaO [vs a SiO 2 ]), fluid chloride and sulfur contents, and magmatic metal contents which reflect province and process. • Exposure and preservation filter observed Mexican metallogeny. Erosion of the Mesozoic arc superstructure in the west leaves mainly tungsten-skarns, burial of the Laramide arc in central Mexico interrupts porphyry copper patterns, and minimal exhumation of mid-Tertiary intrusive centers preserves distal vein or replacement systems. • The superimposed metallogenic patterns in Mexico have parallels with metallogenic patterns in the western United States in terms of the effects of preservation, process, and province. Future work should focus on increasing the basic geological data on mineral deposits and igneous rocks. Geochronology, petrology, and geochemistry would help better define the temporal, spatial, and compositional interrelationships between tectonism, magmatism, and mineralization.

Book chapter