Geology topics

Lori K. Fenton

Publications and source records attributed to Lori K. Fenton.

9 recordsLinked to original sources

USGS2024

Global survey of paleo-bedforms on Mars

Sedimentary processes on Mars have contributed to a plethora of landforms, both ancient and modern. Many of these are aeolian- or fluvial-formed constructs that meet the morphologic criteria for dunes and ripples but are clearly lithified and part of the rock record. This study conducted a survey of Mars using data returned from the High Resolution Imaging Science Experiment (HiRISE) to characterize the spatial distribution, origin, and geologic context of these preserved ancient bedforms, termed here as paleo-bedforms. The most compelling class include organized groups of 2–80-m-tall, crescentic to transverse features spaced at 100–1000 m wavelengths at Apollinaris Sulci, Valles Marineris, and other low-latitude sites. These morphologies along with superposed craters, boulders, and fractures led to the interpretation that these are highly lithified, friable, and partially eroded ancient aeolian dunes. In addition to lithified dunes, other remnants of ancient bedforms include examples in which the dune was completely removed, leaving a shallow depression in a crescentic outline as dune cast pits. The most widespread occurrences of paleo-bedforms show crest-to-crest wavelengths (10–80 m), heights (∼1–4 m), and morphologies consistent with lower-order bedforms of megaripples or transverse aeolian ridges. Paleo-megaripple fields in Arcadia Planitia, Hellas Planitia, Terra Sirenum, and other locations exhibit a progression of degraded morphologies, with crests showing signs of rounding, pitting, or fracturing, while heights and slopes are diminished due to erosion. Most rare are the paleo-bedforms in the fluvial bedform class at Lethe Vallis and Holden crater, as they occur along the path of proposed ancient flooding events. More enigmatic paleo-bedform candidates occur concentrated along the steep Valles Marineris and Noctis Labyrinthus wall slopes. These intermediate-sized, arcuate landforms that resemble transverse climbing dunes are heavily cratered, but they may align perpendicular or oblique to the local gradient, perhaps formed by wall slope winds and slope creep. The bedforms are unlike most ancient terrestrial aeolian or fluvial bedform systems, which are typically preserved only as truncated members of stratigraphic sections. Episodes of burial and exhumation by various geologic units (e.g., the Medusae Fossae Formation, pyroclastic units, lava flows, dust) are notable, whereas other bedforms appear to have been stabilized and partially lithified in place without burial. Ongoing agents of mass wasting, aeolian abrasion, and cryo-driven processes have contributed to the exhumation, erosion, and weathered appearance of paleo-bedforms, and a spectrum of degradation states was observed. Collectively, we report a diverse variety of ancient sedimentary bedforms preserved across Mars, with implications about paleoclimates and landscape evolution on Mars.

Geomorphology↗

USGS2022

Thermophysical and compositional properties of paleobedforms on Mars

Bedforms on Earth and Mars are often preserved in the rock record in the form of sedimentary rock with distinct cross-bedding. On rare occasions, the full-surface geometry of a bedform can be preserved through burial and lithification. These features, known as paleobedforms, are found in a variety of geographic locations on Mars. Evidence in the morphology of paleobedforms, such as the retention of impact craters and steep erosional scarps, suggests that these features are well-lithified and capable of withstanding prolonged weathering and erosion. Here, we present results from thermophysical and compositional analyses on a subset of the best preserved paleobedform candidate fields on Mars. Thermophysical modeling elucidates the changes these bedforms underwent from their unconsolidated, particulate nature to their currently observed properties. Certain paleobedforms have elevated thermal inertias (e.g., ∼300–500 J·m −2 ·s −1/2 ·K −1 ) when compared with modern bedforms (∼250 J·m −2 ·s −1/2 ·K −1 ), and modeling indicates that they have cement volumes of 0.8%–1.5% even as high as 30%. However, most paleobedform candidates have unexpectedly low thermal inertia when compared with modern dunes. Additionally, compositional analyses reveal a range of spectral characteristics within paleobedforms (e.g., primary and secondary alteration products). These features add to the already existing class of Martian surfaces in which thermal inertia does not seem to correspond to erodibility, cohesion, or mechanical strength. Studying paleobedforms with both raised and nonraised thermal inertia has provided new insights into lithification on Mars and constrained the environmental conditions leading to the formation of these enigmatic features.

Journal of Geophysical Research - Planets↗

USGS2021

Summary of the final report from the Ice and Climate Evolution Science Analysis group (ICE-SAG)

The Ice and Climate Evolution Science Analysis Group (ICE-SAG) was convened by the Mars Exploration Program Analysis Group (MEPAG) in fall 2018, with the aims of (1) identifying and prioritizing fundamental science questions related to the recent and ongoing evolution of Mars volatiles and climate, and (2) exploring new mission approaches that could address these high-priority science questions during the coming decade (2023–2032). In this white paper, we summarize the ICE-SAG final report via a selection of report materials and provide broad context for the content of this MEPAG-generated report (which is likely a reference mentioned within a number of other, community-based white papers).

Bulletin of the AAS↗

USGS2020

Ancient Martian aeolian sand dune deposits recorded in the stratigraphy of Valles Marineris and implications for past climates

Aeolian sediment transport, deposition, and erosion have been ongoing throughout Mars's history. This record of widespread aeolian processes is preserved in landforms and geologic units that retain important clues about past environmental conditions including wind patterns. In this study we describe landforms within Melas Chasma, Valles Marineris, that occur in distinct groups with linear to crescentic shapes, arranged with a characteristic wavelength; some possess slope profiles analogous to modern sand dunes yet show evidence for lithification. Based on the features' dimensions, asymmetry, and spatial patterns relative to modern equivalents, we interpret these landforms to be two classes of aeolian bedforms: decameter‐scale megaripples and sand dunes. The presence of superposed erosional features and depositional units indicates that these landforms were cemented and likely ancient. Melas paleodunes are found atop Hesperian‐aged layered deposits, but we estimate them to be younger, likely lithified in the Amazonian period. Although a range of degradation was observed, some paleodunes are >10 m tall and maintain steep lee sides (>25°), an uncommon scenario for terrestrial examples as other geologic processes lead to dune obliteration. The preserved paleobedform geometries are largely consistent with those of modern aeolian indicators, suggesting no major shifts in wind regime or contributing boundary conditions. Finally, we propose that their appearance and context require sequential periods of dune migration, stabilization following catastrophic burial, cementation, differential erosion, exposure, and burial. The presence of wholly preserved duneforms appears to be more common on Mars compared to the Earth and may signal something important about Martian landscape evolution.

Journal of Geophysical Research: Planets↗

USGS2020

The Mars Global Digital Dune Database (MGD3): Composition and stability

We present an expansion to the Mars Global Digital Dune Database (MGD3) describing 1) bulk dune field composition determined by fitting a mineral spectral library to Thermal Emission Spectra (TES) data, and 2) a morphologic stability index that measures the degree of non-aeolian modification that has eroded and stabilized each dune field. This paper describes results for these two components, providing insight into global patterns of dune sand sources, postdepositional alteration, and mineral maturity. Consistent with the work of others, the main mineral components of each analyzed dune field are feldspar, pyroxene, and high-silica phases, with minor amounts of olivine and possibly sulfate minerals. Subtle global-scale spatial variations in olivine and feldspar abundances correspond with previously observed trends in surface mineralogy, suggesting that dune sand is reflective of its regional setting, and thus that aeolian sand has typically not traveled far (<~100s of km) from its source regions. Dune-field-scale stabilization features are found mainly south of 60S, and in a few areas north of 60N, consistent with observed dune and ripple migration rates in these areas. The presence of such stabilization features may be an indicator of where bedform migration rates are low. Abundances of high-silica phases are elevated in some dune fields located in the southern mid- to high-latitudes, particularly in those dune fields located on intercrater plains, where stabilization features tend to be less well developed and where ripples tend to be actively migrating. This correlation of high-silica phase abundance with bedform activity also occurs in the north polar sand seas. In the north polar sand seas, this spectral signature has been attributed to iron-bearing glass that has been weathered through acid leaching, leaving behind silica-enriched rinds, and kept free of any precipitated coatings through active saltation. We hypothesize that near and thermal infrared spectral signatures of acid leaching are indicators of aeolian activity, and thus potentially of mineral maturity, in dune sands abundant in iron-bearing glass.

Icarus↗

USGS2018

Mars global digital dune database (MGD3)—Composition, stability, and thermal inertia

The Mars Global Digital Dune Database (MGD 3 ) is an online repository that has catalogued dune fields larger than 1 km 2 located between latitudes 90° N. and 90° S. The work presented here expands upon previous MGD3 open-file reports, with a new emphasis upon characterizing dune fields through composition, stability, and thermal inertia. Included in this latest addition is a detailed compositional analysis and the associated observational data from Mars Global Surveyor (MGS) Thermal Emission Spectrometer (TES) for dune fields 300 km 2 or larger; a near-global dune stability assessment; Mars Odyssey (MO1) Thermal Emission Imaging System (THEMIS) apparent thermal inertia values; and vertical near-surface thermophysical heterogeneities determined by fitting a two-layer thermal model to observed temperatures. These additional datasets are divided into two workbooks: equatorial and south polar regions. A detailed description for the layout of these workbooks can be found in the corresponding metadata document. The continuing goal of the MGD 3 is to provide a reliable and multifaceted repository of data for Mars’ dunes, with the intention that such data be easily accessible and useful to future research.

Open-File Report↗

USGS2013

Summary of the Third International Planetary Dunes Workshop: remote sensing and image analysis of planetary dunes

The Third International Planetary Dunes Workshop took place in Flagstaff, AZ, USA during June 12–15, 2012. This meeting brought together a diverse group of researchers to discuss recent advances in terrestrial and planetary research on aeolian bedforms. The workshop included two and a half days of oral and poster presentations, as well as one formal (and one informal) full-day field trip. Similar to its predecessors, the presented work provided new insight on the morphology, dynamics, composition, and origin of aeolian bedforms on Venus, Earth, Mars, and Titan, with some intriguing speculation about potential aeolian processes on Triton (a satellite of Neptune) and Pluto. Major advancements since the previous International Planetary Dunes Workshop include the introduction of several new data analysis and numerical tools and utilization of low-cost field instruments (most notably the time-lapse camera). Most presentations represented advancement towards research priorities identified in both of the prior two workshops, although some previously recommended research approaches were not discussed. In addition, this workshop provided a forum for participants to discuss the uncertain future of the Planetary Aeolian Laboratory; subsequent actions taken as a result of the decisions made during the workshop may lead to an expansion of funding opportunities to use the facilities, as well as other improvements. The interactions during this workshop contributed to the success of the Third International Planetary Dunes Workshop, further developing our understanding of aeolian processes on the aeolian worlds of the Solar System.

Aeolian Research↗

USGS2007

Mars global digital dune database and initial science results

A new Mars Global Digital Dune Database (MGD 3 ) constructed using Thermal Emission Imaging System (THEMIS) infrared (IR) images provides a comprehensive and quantitative view of the geographic distribution of moderate‐ to large‐size dune fields (area >1 km 2 ) that will help researchers to understand global climatic and sedimentary processes that have shaped the surface of Mars. MGD 3 extends from 65°N to 65°S latitude and includes ∼550 dune fields, covering ∼70,000 km 2 , with an estimated total volume of ∼3,600 km 3 . This area, when combined with polar dune estimates, suggests moderate‐ to large‐size dune field coverage on Mars may total ∼800,000 km 2 , ∼6 times less than the total areal estimate of ∼5,000,000 km 2 for terrestrial dunes. Where availability and quality of THEMIS visible (VIS) or Mars Orbiter Camera narrow‐angle (MOC NA) images allow, we classify dunes and include dune slipface measurements, which are derived from gross dune morphology and represent the prevailing wind direction at the last time of significant dune modification. For dunes located within craters, the azimuth from crater centroid to dune field centroid (referred to as dune centroid azimuth) is calculated and can provide an accurate method for tracking dune migration within smooth‐floored craters. These indicators of wind direction are compared to output from a general circulation model (GCM). Dune centroid azimuth values generally correlate to regional wind patterns. Slipface orientations are less well correlated, suggesting that local topographic effects may play a larger role in dune orientation than regional winds.

Journal of Geophysical Research E: Planets↗

USGS2000

Topography and Stratigraphy of the Northern Martian Polar Layered Deposits Using Photoclinometry, Stereogrammetry, and MOLA Altimetry

We present two photoclinometric profiles across a trough in the martian northern polar layered terrain. Complications caused by albedo variations were avoided by using an early springtime Viking image with a thin cover of seasonal CO 2 frost. The topographic profiles were constrained with stereogrammetric elevations derived from summertime Viking images of the same region. We find that the photoclinometric profiles are consistent with a nearby MOLA (Mars Orbiter Laser Altimeter) track crossing the same polar trough. The trough is asymmetric, with higher relief and a steeper slope on the equatorward-facing wall. Individual layers are subdued and difficult to observe in the profiles. A decrease in both relief and elevation toward the eastern end of the trough suggests that layers become thinner to the east. Declining equatorward slopes in the eastern portion of the trough imply that erosion rates have varied along the trough. The variation in erosion rate may be linked to the change in layer thickness along the trough. Layers have an average thickness of 19±8 m in the center of the trough and 59±32 m on the northern wall. The northern wall is most likely composed of thinner layers that are obscured. To first order, we find that a 19-m layer requires 16,000 years of deposition to form. Although this timescale does not coincide with orbital variation periods of 10 5 and 10 6 years, deposition rates may not be constant and thus the 16,000-year layer formation time does not preclude layer formation during part of each orbital oscillation.

Icarus↗