Geology topics

Leonardo Ramírez-Guzmán

Publications and source records attributed to Leonardo Ramírez-Guzmán.

3 recordsLinked to original sources

USGS2013

Ground motion in the presence of complex topography: Earthquake and ambient noise sources

To study the influence of topography on ground motion, eight seismic recorders were deployed for a period of one year over Poverty Ridge on the east side of the San Francisco Bay Area, California. This location is desirable because of its proximity to local earthquake sources and the significant topographic relief of the array (439 m). Topographic amplification is evaluated as a function of frequency using a variety of methods, including reference‐site‐based spectral ratios and single‐station horizontal‐to‐vertical spectral ratios using both shear waves from earthquakes and ambient noise. Field observations are compared with the predicted ground motion from an accurate digital model of the topography and a 3D local velocity model. Amplification factors from the theoretical calculations are consistent with observations. The fundamental resonance of the ridge is prominently observed in the spectra of data and synthetics; however, higher‐frequency peaks are also seen primarily for sources in line with the major axis of the ridge, perhaps indicating higher resonant modes. Excitations of lateral ribs off of the main ridge are also seen at frequencies consistent with their dimensions. The favored directions of resonance are shown to be transverse to the major axes of the topographic features.

California↗

USGS2013

Rupture history of the 2008 M w 7.9 Wenchuan, China, earthquake: Evaluation of separate and joint inversions of geodetic, teleseismic, and strong-motion data

An extensive data set of teleseismic and strong-motion waveforms and geodetic offsets is used to study the rupture history of the 2008 Wenchuan, China, earthquake. A linear multiple-time-window approach is used to parameterize the rupture. Because of the complexity of the Wenchuan faulting, three separate planes are used to represent the rupturing surfaces. This earthquake clearly demonstrates the strengths and limitations of geodetic, teleseismic, and strong-motion data sets. Geodetic data (static offsets) are valuable for determining the distribution of shallower slip but are insensitive to deeper faulting and reveal nothing about the timing of slip. Teleseismic data in the distance range 30°–90° generally involve no modeling difficulties because of simple ray paths and can distinguish shallow from deep slip. Teleseismic data, however, cannot distinguish between different slip scenarios when multiple fault planes are involved because steep takeoff angles lead to ambiguity in timing. Local strong-motion data, on the other hand, are ideal for determining the direction of rupture from directivity but can easily be over modeled with inaccurate Green’s functions, leading to misinterpretation of the slip distribution. We show that all three data sets are required to give an accurate description of the Wenchuan rupture. The moment is estimated to be approximately 1.0 × 10 21 N · m with the slip characterized by multiple large patches with slips up to 10 m. Rupture initiates on the southern end of the Pengguan fault and proceeds unilaterally to the northeast. Upon reaching the cross-cutting Xiaoyudong fault, rupture of the adjacent Beichuan fault starts at this juncture and proceeds bilaterally to the northeast and southwest.

Wenchuan↗

USGS2011

Long-period earthquake simulations in the Wasatch Front, UT: misfit characterization and ground motion estimates

In this research we characterize the goodness-of-fit between observed and synthetic seismograms from three small magnitude (M3.6-4.5) earthquakes in the region using the Wasatch Front community velocity model (WCVM) in order to determine the ability of the WCVM to predict earthquake ground motions for scenario earthquake modeling efforts. We employ the goodness-of-fit algorithms and criteria of Olsen and Mayhew (2010). In focusing comparisons on the ground motion parameters that are of greatest importance in engineering seismology, we find that the synthetic seismograms calculated using the WCVM produce a fair fit to the observed ground motion records up to a frequency of 0.5 Hz for two of the modeled earthquakes and up to 0.1 Hz for one of the earthquakes. In addition to the reference seismic material model (WCVM), we carry out earthquake simulations using material models with perturbations to the regional seismic model and with perturbations to the deep sedimentary basins. Simple perturbations to the regional seismic velocity model and to the seismic velocities of the sedimentary basin result in small improvements in the observed misfit but do not indicate a significantly improved material model. Unresolved differences between the observed and synthetic seismograms are likely due to un-modeled heterogeneities and incorrect basin geometries in the WCVM. These differences suggest that ground motion prediction accuracy from deterministic modeling varies across the region and further efforts to improve the WCVM are needed.

Utah↗