Geology topics

Lauren A. Edgar

Publications and source records attributed to Lauren A. Edgar.

At least 19 recordsLinked to original sources

USGS2025

Paleo-scours within the layered sulfate-bearing unit at Gale crater, Mars: Evidence for intense wind erosion

The surface of modern Mars is largely shaped by wind, but the influence of past wind activity is less well constrained. Sedimentary rocks exposed in the lower foothills of Aeolis Mons, the central mound within Gale crater, record a transition from predominantly lacustrine deposition in the Murray formation to aeolian deposition in the Mirador formation. Here, we report a series of enigmatic decameter-wide, concave-up scour-and-fill structures within the Mirador formation and discuss their formation mechanisms. Using panoramic images of stratigraphy exposed in cliff faces acquired by the Curiosity rover, we map the extent, distribution and orientation of the scour-and-fill structures and document the sedimentary facies within and surrounding these structures. The scours are grouped into two classes: (A) scours with a simple, symmetric morphology and light-toned, draping infill; and (B) scours with lateral pinching and dark-toned infill. We find that the scour-enclosing environment is composed of planar, even-in-thickness laminations with a pin-stripe pattern which we interpret as wind-ripple strata formed within an aeolian sandsheet environment. Class B contains cm-scale cross-bedding and a wing-shaped feature making this scour-and-fill structure consistent with fluvial processes. We interpret scour fill of class A as an aeolian infill due to similarities with the surrounding sandsheet strata. The broad morphologies and distribution of class A are also consistent with the geometry of blowout structures formed by localized, enhanced wind deflation. These paleo-blowout structures occur clustered within the same stratigraphic interval, which may imply that they record an interval of intensified wind activity at Gale crater.

JGR Planets↗

USGS2025

Pediment formation and subsequent erosion in Gale crater: Clues to the climate history of Mars

Evidence of paleo-rivers, fans, deltas, lakes, and channel networks across Mars has prompted much debate about what climate conditions would permit the formation of these surface water derived features. Pediments, gently sloping erosional surfaces of low relief developed in bedrock, have also been identified on Mars. On Earth, these erosional landforms, often thought to be created by overland flow and shallow channelized runoff, are typically capped by fluvial sediments, and thus in exceptionally arid regions, pediments are interpreted to record past wet periods. Here we document the Greenheugh pediment in Gale crater, exploiting the observational capability of the Curiosity rover. The absence of a fluvial cap suggests that the pediment was likely cut by wind erosion, not fluvial processes. The pediment was then buried by an aeolian deposit (Stimson sandstone) that mantled the lower footslopes of Aeolis Mons (informally known as Mt. Sharp). This burial terminated active wind erosion, preserving the pediment surface (as an angular unconformity). Groundwater was present prior-to, during, and shortly after Stimson deposition, perhaps contributing to lithification and certainly to early diagenesis. Post lithification, wind erosion first cut canyons in the northern most footslopes (north of Vera Rubin ridge). Unlithified gravels were deposited in these canyons, likely due to runoff from Mt. Sharp. Boulder-rich fluvial and debris flow deposits built a > 70 m thick sequence (Gediz Vallis ridge) on the southern Greenheugh pediment. Continued wind erosion left elevated patches of gravel on the northern footslopes, and exposure age dating shows that erosion essentially ceased before 1 Ga (but possibly much earlier). Erosion to the south led to emergence of Vera Rubin ridge, retreat of the Greenheugh pediment, and the formation of Glen Torridon valley. Hence, this footslope environment of Mt. Sharp records climate-driven periods of wind erosion, aeolian deposition (and groundwater activity), surface runoff and sediment deposition, followed by further significant wind erosion that declined to present very slow rates. This likely occurred during the late Hesperian and possibly into the Amazonian.

Icarus↗

USGS2025

Wave ripples formed in ancient, ice-free lakes in Gale crater, Mars

Symmetrical wave ripples identified with NASA’s Curiosity rover in ancient lake deposits at Gale crater provide a key paleoclimate constraint for early Mars: At the time of ripple formation, climate conditions must have supported ice-free liquid water on the surface of Mars. These features are the most definitive examples of wave ripples on another planet. The ripples occur in two stratigraphic intervals within the orbitally defined Layered Sulfate Unit: a thin but laterally extensive unit at the base of the Amapari member of the Mirador formation, and a sandstone lens within the Contigo member of the Mirador formation. In both locations, the ripples have an average wavelength of ~4.5 centimeters. Internal laminae and ripple morphology show an architecture common in wave-influenced environments where wind-generated surface gravity waves mobilize bottom sediment in oscillatory flows. Their presence suggests formation in a shallow-water (<2 meters) setting that was open to the atmosphere, which requires atmospheric conditions that allow stable surface water.

Science Advances↗

USGS2025

On the importance of geological and geophysical lunar field work enabled by Artemis Base Camp

We report on six Findings related to the benefit of Artemis Base Camp (ABC) to lunar geoscience (Figure 1). These Findings are on the topics of 1) Repeat field site visits; 2) Geological experiments; 3) Satellite ABC campus(es); 4) Advanced lab equipment; 5) Frequent and resource-intensive EVAs; and 6) Geoscience STEM engagement. Lastly, we consider certain issues and caveats meriting further study in any base camp architecture.

Report↗

USGS2024

Assessing community needs for terrestrial analog studies

Executive Summary The U.S. Geological Survey (USGS) developed and released a survey to assess the terrestrial analog needs of the planetary science community. The goal was to assess the current state of terrestrial analog studies and determine community needs related to the use of field sites for training and research, data dissemination and archiving, and sample collections. The survey was designed to gather feedback from community members who have a self-described interest in the use of terrestrial analogs. The web-based questionnaire contained a total of 33 questions and was designed to take <10 minutes to complete. The questionnaire was divided into four sections: (1) “Respondent Details,” (2) “Field Analog Use,” (3) “Data Portal Use,” and (4) “Geologic Materials Collection Use.” Comment boxes were provided for 12 of the 33 questions, which allowed respondents to provide more detailed comments to individual questions. The questionnaire received a total of 248 responses. We identified 21 notable findings which are matched with one or more recommendations to be addressed by the planetary science community. In general, the findings highlight the importance of terrestrial analog studies to the planetary science community. The findings address how and why the community uses terrestrial analogs, areas in which further support can lead to a greater return on investment, and how the community can better manage data and samples from these studies. The results from this survey identify a need for additional training opportunities and analog-focused workshops. There is a gap in formal education related to field techniques for a significant part of researchers who conduct fieldwork. There is also a subset of the community who are interested in conducting field-based studies but are, however, unaware of relevant sites and methods. Workshops would provide an opportunity for scientists at all career stages to share their results and discuss common challenges such as logistics, field safety, funding, and data and sample archiving. Trainings, workshops, and better communication may also lead to increased field-analog work at locations in closer proximity to home institutions, reducing costs associated with large field expeditions and ultimately leading to more available funding for more localized field studies. The survey also shows that the ability to archive a diverse array of field data is a major challenge for terrestrial studies and finds that existing practices are not compliant with National Aeronautics and Space Administration (NASA) data management policies. The survey points to a strong need for a central data repository, allowing for easier access to existing analog data and the archiving of new field data. The community would benefit from additional physical sample archiving, consolidated into several key institutions to promote easier access, such as NASA and USGS centers. Though scientists would still need to acquire their own samples in the field for certain studies, many studies would benefit from an archive of existing samples and associated data for widely used analog sites, reducing redundant sampling practices. This report finds that a coordinated effort to improve and standardize training, data archiving, sample curation, and communication regarding terrestrial analog studies will best serve the planetary science community in our exploration goals.

Open-File Report↗

USGS2024

A novel surface energy balance method for thermal inertia studies of terrestrial analogs

Surface thermal inertia derived from satellite imagery offers a valuable tool for remotely mapping the physical structure and water content of planetary regolith. Efforts to quantify thermal inertia using surface temperatures on Earth, however, have consistently yielded large uncertainties and suffered from a lack of reproducibility. Unlike dry or airless bodies, Earth's abundant water and dense atmosphere lead to dynamic thermophysical conditions that are a greater challenge to model than on a world like Mars. In this work, an approach was developed using field experiments to inform and fine-tune a thermophysical model of terrestrial sediment and calculate an inherent thermal inertia value with higher precision and less initial knowledge of the sediment than has previously been achieved remotely on Earth. A thermal inertia derived for a basaltic tephra site in Northern Arizona was replicated within 1% between different field seasons, demonstrating reproducibility. Model-derived values were validated in situ by two different thermophysical field probes to within 8% of the measured mean values. Analog studies such as this hold the promise of improved interpretations of surface materials on Mars, and an accurate thermal model for Earth is the key step to enabling translation between the two worlds.

Earth and Space Science↗

USGS2024

Geological context and significance of the clay-sulfate transition region in Mount Sharp, Gale crater, Mars: An integrated assessment based on orbiter and rover data

On Mars, phyllosilicate (“clay”) minerals are often associated with older terrains, and sulfate minerals are associated with younger terrains, and this dichotomy is taken as evidence that Mars’ surface dried up over time. Therefore, in situ investigation of the Mount Sharp strata in Gale crater, which record a shift from dominantly clay-bearing to sulfate-bearing minerals, as seen in visible−near-infrared orbital reflectance spectra, is a key science objective for the Mars Science Laboratory (MSL) Curiosity rover mission. Here, we present regional (orbiter-based) and in situ (rover-based) evidence for a low-angle erosional unconformity that separates the lacustrine and marginal lacustrine deposits of the Carolyn Shoemaker formation from the dominantly eolian deposits of the lower Mirador formation within the orbitally defined clay-sulfate transition region. The up-section record of wetter (Carolyn Shoemaker formation) to drier (lower Mirador formation) depositional conditions is accompanied by distinct changes in diagenesis. Clay minerals occur preferentially within the Carolyn Shoemaker formation and are absent within the lower members of the Mirador formation. At and above the proposed unconformity, strata are characterized by an increase in diagenetic nodules enriched in X-ray amorphous Mg-sulfate. Early clay formation in the Carolyn Shoemaker formation may have created a hydraulic barrier such that later migrating magnesium- and sulfur-rich fluids accumulated preferentially within the lower members of the Mirador formation. The proposed unconformity may have also acted as a fluid conduit to further promote Mg-sulfate nodule formation at the Carolyn Shoemaker−Mirador formation boundary. These results confirm an association of the clay-sulfate transition with the drying of depositional environments, but they also suggest that at least some orbital sulfate signatures within the region are not time-congruent with the environmental signals extracted from primary sedimentology. Our findings highlight that complex interactions among primary depositional environment, erosion, and diagenesis contribute to the transition in clay-sulfate orbital signatures observed in the stratigraphy of Mount Sharp.

GSA Bulletin↗

USGS2024

Evolution of a lake margin recorded in the Sutton Island member of the Murray formation, Gale crater, Mars

This study uses data from the Mars Science Laboratory Curiosity rover to document the facies of the Sutton Island member of the Murray formation, interpret paleoenvironments, and establish key stratigraphic transitions at Gale crater. Two facies associations were identified: Facies Association 1 (FA1) and Facies Association 2 (FA2). Individual facies in FA1 include planar-laminated mudstone with minor intervals of planar sandstone, ripple cross-laminated sandstone, cross-stratified sandstone, and alternating laminated sandstone and mudstone. Meter-thick packages of planar-laminated mudstone in FA1 are interpreted to represent deposition in low-energy ponded environments along the lake margin. Straight- and curve-crested ripple cross-laminated facies are interpreted to represent current-influenced deposition. Cross-stratified sandstone facies consist of dm-thick sets that represent deposition in distal channels. Intercalated mm-scale mudstone and sandstone laminae represent waning flow conditions and possible channel abandonment. Facies in FA1 collectively represent deposition in a distal delta plain. FA2 is comprised of planar-laminated mudstone with minor sandstone and is interpreted to represent deposition in a lacustrine-basin setting by suspension settling linked to density flows. FA1 transitions upward into FA2, defining a rapid transgression substantial enough to facilitate the deposition of distal lake facies above delta plain facies. The abrupt transition from FA2 back to FA1 deltaic deposits is suggestive of forced regression. Facies in FA1 and FA2 are consistent with the prevalence of aqueous environments recorded in other Murray formation members and extend our understanding of the dynamic sedimentary processes that characterized ancient lacustrine systems at Gale crater.

Journal of Geophysical Research - Planets↗

USGS2024

Global survey of paleo-bedforms on Mars

Sedimentary processes on Mars have contributed to a plethora of landforms, both ancient and modern. Many of these are aeolian- or fluvial-formed constructs that meet the morphologic criteria for dunes and ripples but are clearly lithified and part of the rock record. This study conducted a survey of Mars using data returned from the High Resolution Imaging Science Experiment (HiRISE) to characterize the spatial distribution, origin, and geologic context of these preserved ancient bedforms, termed here as paleo-bedforms. The most compelling class include organized groups of 2–80-m-tall, crescentic to transverse features spaced at 100–1000 m wavelengths at Apollinaris Sulci, Valles Marineris, and other low-latitude sites. These morphologies along with superposed craters, boulders, and fractures led to the interpretation that these are highly lithified, friable, and partially eroded ancient aeolian dunes. In addition to lithified dunes, other remnants of ancient bedforms include examples in which the dune was completely removed, leaving a shallow depression in a crescentic outline as dune cast pits. The most widespread occurrences of paleo-bedforms show crest-to-crest wavelengths (10–80 m), heights (∼1–4 m), and morphologies consistent with lower-order bedforms of megaripples or transverse aeolian ridges. Paleo-megaripple fields in Arcadia Planitia, Hellas Planitia, Terra Sirenum, and other locations exhibit a progression of degraded morphologies, with crests showing signs of rounding, pitting, or fracturing, while heights and slopes are diminished due to erosion. Most rare are the paleo-bedforms in the fluvial bedform class at Lethe Vallis and Holden crater, as they occur along the path of proposed ancient flooding events. More enigmatic paleo-bedform candidates occur concentrated along the steep Valles Marineris and Noctis Labyrinthus wall slopes. These intermediate-sized, arcuate landforms that resemble transverse climbing dunes are heavily cratered, but they may align perpendicular or oblique to the local gradient, perhaps formed by wall slope winds and slope creep. The bedforms are unlike most ancient terrestrial aeolian or fluvial bedform systems, which are typically preserved only as truncated members of stratigraphic sections. Episodes of burial and exhumation by various geologic units (e.g., the Medusae Fossae Formation, pyroclastic units, lava flows, dust) are notable, whereas other bedforms appear to have been stabilized and partially lithified in place without burial. Ongoing agents of mass wasting, aeolian abrasion, and cryo-driven processes have contributed to the exhumation, erosion, and weathered appearance of paleo-bedforms, and a spectrum of degradation states was observed. Collectively, we report a diverse variety of ancient sedimentary bedforms preserved across Mars, with implications about paleoclimates and landscape evolution on Mars.

Geomorphology↗

USGS2022

The Curiosity Rover’s exploration of Glen Torridon, Gale crater, Mars: An overview of the campaign and scientific results

The Mars Science Laboratory rover, Curiosity , explored the clay mineral-bearing Glen Torridon region for one martian year between January 2019 and January 2021, including a short campaign onto the Greenheugh pediment. The Glen Torridon campaign sought to characterize the geology of the area, seek evidence of habitable environments, and document the onset of a potentially global climatic transition during the Hesperian era. Curiosity roved 5 km in total throughout Glen Torridon, from the Vera Rubin ridge to the northern margin of the Greenheugh pediment. Curiosity acquired samples from 11 drill holes during this campaign and conducted the first martian thermochemolytic-based organics detection experiment with the Sample Analysis at Mars instrument suite. The lowest elevations within Glen Torridon represent a continuation of lacustrine Murray formation deposits, but overlying widespread cross bedded sandstones indicate an interval of more energetic fluvial environments and prompted the definition of a new stratigraphic formation in the Mount Sharp group called the Carolyn Shoemaker formation. Glen Torridon hosts abundant phyllosilicates yet remains compositionally and mineralogically comparable to the rest of the Mount Sharp group. Glen Torridon samples have a great diversity and abundance of sulfur-bearing organic molecules, which are consistent with the presence of ancient refractory organic matter. The Glen Torridon region experienced heterogeneous diagenesis, with the most striking alteration occurring just below the Siccar Point unconformity at the Greenheugh pediment. Results from the pediment campaign show that the capping sandstone formed within the Stimson Hesperian aeolian sand sea that experienced seasonal variations in wind direction.

JGR Planets↗

USGS2022

Evidence for fluctuating wind in shaping an ancient Martian dune field: The Stimson formation at the Greenheugh pediment, Gale crater

Temporal fluctuations of wind strength and direction can influence aeolian bedform morphology and orientation, which can be encoded into the architecture of aeolian deposits. These strata represent a direct record of atmospheric processes and can be used to understand ancient Martian atmospheric processes as well as those on Earth. The strata can: give insight to ancient atmospheric circulation, how the atmosphere evolved in response to global changes in habitability, and how ancient processes differ from modern processes. The Stimson formation at the Greenheugh pediment (Gale crater) records evidence of fluctuating wind across multiple temporal scales. The strata can be subdivided into three intervals–Gleann Beag, Ladder, and Edinburgh intervals. Internally, the intervals record changes of dune morphology and orientation, correlatable to wind fluctuations at multiple temporal scales. The basal Gleann Beag interval comprises compound cross-strata, deposited by oblique compound dunes. These dunes record a bimodal wind regime, resulting in net sediment transport toward the north. The Ladder interval records a reversal of sediment transport to the south, where straight-crested simple-dunes shaped by a seasonally variable winds formed. Finally, the Edinburgh interval records sediment transport to the west, where a unimodal wind formed sinuous-crested simple dunes. These observations demonstrate active and variable atmospheric circulation in Gale crater during the accumulation of the Stimson dune field, at multiple temporal scales from seasonally driven winds to much longer time-frames, during the Hesperian. These observations can be used to further understand ancient atmospheric conditions and processes, at a high temporal resolution on Mars.

Journal of Geophysical Research - Planets↗

USGS2022

Geology and stratigraphic correlation of the Murray and Carolyn Shoemaker formations across the Glen Torridon region, Gale crater, Mars

The Glen Torridon (GT) region within Gale crater, Mars, occurs in contact with the southern side of Vera Rubin ridge (VRR), a well-defined geomorphic feature that is comparatively resistant to erosion. Prior to detailed ground-based investigation of GT, its geologic relationship with VRR was unknown. Distinct lithologic subunits within the Jura member (Murray formation), which forms the upper part of VRR, made it possible to be also identified within GT. This indicates that the strata pass across the geomorphic divide between regions. Furthermore, the cross-bedded lower part of the overlying Knockfarril Hill member (Carolyn Shoemaker formation) also occurs within both VRR and GT. Correlation of both units demonstrates that the strata form a continuous stratigraphic succession regardless of large-scale geomorphic expression. The lithologic change from mudstone (Jura member) to cross-bedded sandstone (Knockfarril Hill member) heralds a significant shift in paleoenvironment from lacustrine to fluvial. The upper part of the Knockfarril Hill member consists of interbedded mudstone and sandstone that transitions to the overlying finely laminated mudstone of the Glasgow member, and a return to lacustrine deposition. In GT, the Stimson formation unconformably overlies the Glasgow member, where it demarks the southern boundary of GT. Contacts for each stratigraphic unit were defined and transferred to a high-resolution image base to make a geologic map and cross sections perpendicular to the NE strike. Stratal dips cannot exceed 2° NW to retain the positions of stratigraphic units in the locations they are exposed throughout GT.

Journal of Geophysical Research: Planets↗

USGS2022

Sedimentological and geochemical perspectives on a marginal lake environment recorded in the Hartmann’s Valley and Karasburg members of the Murray formation, Gale crater, Mars

This study utilizes instruments from the Curiosity rover payload to develop an integrated paleoenvironmental and compositional reconstruction for the 65-m thick interval of stratigraphy comprising the Hartmann's Valley and Karasburg members of the Murray formation, Gale crater, Mars. The stratigraphy consists of cross-stratified sandstone (Facies 1), planar-laminated sandstone (Facies 2), and planar-laminated mudstone (Facies 3). Facies 1 is composed of sandstone showing truncated sets of concave-curvilinear laminae stacked into cosets. Sets are estimated to be meter-to sub-meter-scale, consistent with low-height dunes. Thin stratigraphic intervals of Facies 1 and stacking patterns with Facies 2 and 3 support a wet aeolian dune interpretation. Meter-thick packages of planar-laminated sandstone (Facies 2) are interpreted to represent interfingering dune-interdune strata. Facies 3 consists of meter-thick packages of planar-laminated mudstone interpreted to represent lacustrine deposition with persistent standing water. Integration of geochemistry with each facies reveals some compositional control based on the depositional process. Models for source rock composition from Alpha Particle X-Ray Spectrometer measurements show that facies derived from a basaltic source. Alteration indices and geochemical trends provide evidence that moderate chemical weathering occurred before compositional changes due to diagenesis. Differences in wt% FeO (T) and TiO 2 between facies are minimal, though trends point to sediment sorting in transport. Comparisons to terrestrial basaltic sedimentary systems indicate that the Hartmann's Valley and Karasburg facies reflect deposition in an environment where diverse subaqueous and subaerial facies persisted adjacent to a long-lived body of water.

Journal of Geophysical Research Planets↗

USGS2022

Thermophysical and compositional properties of paleobedforms on Mars

Bedforms on Earth and Mars are often preserved in the rock record in the form of sedimentary rock with distinct cross-bedding. On rare occasions, the full-surface geometry of a bedform can be preserved through burial and lithification. These features, known as paleobedforms, are found in a variety of geographic locations on Mars. Evidence in the morphology of paleobedforms, such as the retention of impact craters and steep erosional scarps, suggests that these features are well-lithified and capable of withstanding prolonged weathering and erosion. Here, we present results from thermophysical and compositional analyses on a subset of the best preserved paleobedform candidate fields on Mars. Thermophysical modeling elucidates the changes these bedforms underwent from their unconsolidated, particulate nature to their currently observed properties. Certain paleobedforms have elevated thermal inertias (e.g., ∼300–500 J·m −2 ·s −1/2 ·K −1 ) when compared with modern bedforms (∼250 J·m −2 ·s −1/2 ·K −1 ), and modeling indicates that they have cement volumes of 0.8%–1.5% even as high as 30%. However, most paleobedform candidates have unexpectedly low thermal inertia when compared with modern dunes. Additionally, compositional analyses reveal a range of spectral characteristics within paleobedforms (e.g., primary and secondary alteration products). These features add to the already existing class of Martian surfaces in which thermal inertia does not seem to correspond to erodibility, cohesion, or mechanical strength. Studying paleobedforms with both raised and nonraised thermal inertia has provided new insights into lithification on Mars and constrained the environmental conditions leading to the formation of these enigmatic features.

Journal of Geophysical Research - Planets↗

USGS2022

Orbital and in-situ investigation of periodic bedrock ridges in Glen Torridon, Gale Crater, Mars

Wind has been the dominant agent of landscape modification on Mars for the past ~3 billion years. Among the diversity of features formed by aeolian abrasion on the surface of Mars are periodic bedrock ridges (PBRs), a relatively recently recognized class of erosional bedforms on Mars for which Earth analogues are rare. Gale crater, the field site for NASA’s Mars Science Laboratory Curiosity rover since it landed there in 2012, contains a diverse and extensive record of aeolian deposition and erosion. This study focuses on a series of periodic, linear bedrock ridges that occur within the Fe/Mg-smectite clay-bearing Glen Torridon region of Aeolis Mons (informally Mount Sharp). During Curiosity’s exploration of the Glen Torridon region between sols ~2300-3080, the rover drove through this field of ridges, providing the first opportunity for the in situ observation of these enigmatic erosional features. This study characterizes the Glen Torridon ridges using orbiter and rover data to determine their morphology, spatial distribution, compositional and material properties, and association with other aeolian features in the area. Based on these observations, the Glen Torridon ridges are interpreted to be consistent with an origin as wind-eroded periodic bedrock ridges carved during the most recent exhumation of Mount Sharp into the present-day mound. Although there is evidence for multidirectional winds in the Glen Torridon region based on the orientation of modern ripples, megaripples, TARs and other bedrock indicators, the consistent orientation of the Glen Torridon ridges, coupled with morphologic asymmetries within the ridges, support formation and elongation of the Glen Torridon PBRs forms parallel to a net regional northerly wind direction in and around Gale crater.

Journal of Geophysical Research E: Planets↗

USGS2022

Ancient winds, waves, and atmosphere in Gale Crater, Mars, inferred from sedimentary structures and wave modeling

Wave modeling and analysis of sedimentary structures were used to evaluate whether four examples of symmetrical, reversing, or straight-crested bedforms in Gale crater sandstones are preserved wave ripples; deposition by waves would demonstrate that the lake was not covered by ice at that time. Wave modeling indicates that regardless of atmospheric density, winds that exceeded the threshold of aeolian sand transport could have generated waves capable of producing nearshore wave ripples in most grain sizes of sand. Reversing 3-m-wavelength bedforms in the Kimberley formation are interpreted not as wave ripples but rather as large aeolian ripples that formed in an atmosphere approximately as thin as at present. These exhumed bedforms define many of the ridges at outcrops that appear striated in satellite images. At Kimberley these bedforms demonstrably underlie and therefore predate subaqueous beds, suggesting that a thin atmosphere existed at least temporarily before subaqueous deposition ceased in the crater. The other three candidate wave ripples (Square Top, Hunda, and Voe) are consistent with modeled waves, but other origins cannot be excluded. The predominance of flat-laminated (non-rippled) beds in the lacustrine Murray formation suggests that some aspect of the lake was not conducive to formation or preservation of recognizable wave ripples. Water depths may generally have been too deep, lakebed sediment may have been too fine-grained, the lake may have been smaller than modeled, or the lake may have been covered by ice. Plain Language Summary Wave modeling and analysis of sedimentary structures were used to evaluate whether ancient lake deposits in Gale crater contain ripples formed by waves on the surface of the lake. Deposition by waves would show that the lake was not covered by ice at that time. Modeling shows that regardless of atmospheric density, winds capable of moving sand on land would generally have been strong enough to form waves that would produce ripples near shore. Large bedforms in the Kimberley formation are interpreted as ripples formed by the wind in an atmosphere similar to that of Mars today. These bedforms underlie and are older than other beds deposited in water, thereby showing that a thin atmosphere existed at least temporarily before deposition in water ceased in the crater. Three other candidate wave ripples are consistent with modeled waves, but other origins are possible. Thick sequences of sedimentary rock in Gale crater are flat-laminated rather than rippled, suggesting that some aspect of the lake was not favorable for their formation or preservation. Much of the lake may have been too deep or ice-covered, or the lake may have been smaller than modeled or had sediment too fine to form easily observed ripples.

Journal of Geophysical Research: Planets↗

USGS2021

A geologic field guide to S P Mountain and its lava flow, San Francisco Volcanic Field, Arizona

Introduction We created this guide to introduce the user to the San Francisco Volcanic Field as a terrestrial analog site for planetary volcanic processes. For decades, the San Francisco Volcanic Field has been used to teach scientists to recognize the products of common types of volcanic eruptions and associated volcanic features. The volcanic processes and products observed in this volcanic field are like those observed on lunar and Martian surfaces. As a result, this region has been a favored location for training National Aeronautics and Space Administration astronauts and engineers since the Apollo missions. Though the San Francisco Volcanic Field has more than 600 volcanic vents and flows, this guide will focus on S P Mountain (known locally as S P Crater, located ~30 miles north of Flagstaff, Arizona), one of the best preserved and most accessible of the volcanic cones and lava flows. S P Mountain presents both major types of basaltic eruptions—explosive and effusive—as well as some commonly associated tectonic landforms. We assume that the user has a basic understanding of geologic concepts and terminology. For more specialized terminology, we include tables showing the classification scheme for lava compositions, styles of eruptions, and tephra sizes (tables 1, 2, and 3). If a further introduction or refresher in volcanological terminology is desired, we suggest reviewing such terms on the U.S. Geological Survey Volcano Science Center’s online glossary ( https://volcanoes.usgs.gov/vsc/glossary/ ). One term requires clarification at the start of this guide—the term cinder. The terms cinder and cinder cone are widely used to describe the material and edifice produced by lava fountains. However, the term comes from the mining and construction industries and has no clear or formal definition. The international committees in geology and volcanology have chosen the term tephra to be the general term to describe pyroclasts (material ejected through a volcanic explosion or from a volcanic vent). Therefore, in this guide, we use the term tephra rather than cinder. This guide is outlined as follows: A brief tour of volcanism across the solar system A brief geologic history of the Colorado Plateau and San Francisco Volcanic Field Background on distributed volcanism and S P Mountain Driving directions and field stops Questions for discussion Each field stop includes a brief description, learning goals, tasks, and a summary of key points. At the end of the field guide are discussion points and questions that will ask the user to consider what they have observed and learned and how such knowledge can be used to better our understanding of geologic processes on other planetary bodies. Upon the completion of this field guide, we expect the user to: Have a basic understanding of the volcanic processes relevant to S P Mountain and its lava flow. Be able to identify different volcanic textures that are associated with tephra cones. Be aware of the different observations one can make at different scales (for example, observing lava flow morphology from aerial or satellite imagery versus tephra characteristics in the field).

Arizona↗

USGS2021

A review of the phyllosilicates in Gale Crater as detected by the CheMin Instrument on the Mars Science Laboratory, Curiosity Rover

Curiosity , the Mars Science Laboratory (MSL) rover, landed on Mars in August 2012 to investigate the ~3.5-billion-year-old (Ga) fluvio-lacustrine sedimentary deposits of Aeolis Mons (informally known as Mount Sharp) and the surrounding plains (Aeolis Palus) in Gale crater. After nearly nine years, Curiosity has traversed over 25 km, and the Chemistry and Mineralogy (CheMin) X-ray diffraction instrument on-board Curiosity has analyzed 30 drilled rock and three scooped soil samples to date. The principal strategic goal of the mission is to assess the habitability of Mars in its ancient past. Phyllosilicates are common in ancient Martian terrains dating to ~3.5–4 Ga and were detected from orbit in some of the lower strata of Mount Sharp. Phyllosilicates on Earth are important for harboring and preserving organics. On Mars, phyllosilicates are significant for exploration as they are hypothesized to be a marker for potential habitable environments. CheMin data demonstrate that ancient fluvio-lacustrine rocks in Gale crater contain up to ~35 wt. % phyllosilicates. Phyllosilicates are key indicators of past fluid–rock interactions, and variation in the structure and composition of phyllosilicates in Gale crater suggest changes in past aqueous environments that may have been habitable to microbial life with a variety of possible energy sources.

Minerals↗