Geology Reports⌕ Search

Geology topics

Kristen A. Bennett

Publications and source records attributed to Kristen A. Bennett.

29 records · Page 2Linked to original sources
USGS2022

Temperatures of the Lacus Mortis region of the Moon

Over 11 years of data acquired by the Diviner Lunar Radiometer Experiment instrument aboard Lunar Reconnaissance Orbiter have been compiled into a comprehensive data set of surface temperatures in the Lacus Mortis region which includes the landing ellipse of the Astrobotic Mission One lander mission. These data provide diurnal brightness temperatures at 128 pixels per degree (ppd) spatial resolution and 0.1 hr of local time resolution. From this data set, we highlight several features that display variations in radiative and thermophysical properties in the Lacus Mortis region and characterize the temperatures of the Astrobotic Mission One landing ellipse. We identify distinctly contrasting properties of materials in the walls of Bürg crater, hummocks of materials on the southeast margin of the mare basalts, and materials exposed or excavated by impacts. Additionally, we describe an exceptionally rocky fault scarp that predates the formation of Bürg crater suggesting the observed boulders are replenished on a timescale <1 Ga. Within the Astrobotic landing ellipse, temperatures are observed to range from ∼88 to ∼359 K with sunrise and sunset local times constrained to 5.8–6.3 hr and 17.8 and 18.1 hr respectively.

Earth and Space Science↗
USGS2021

Diagenesis revealed by fine-scale features at Vera Rubin ridge, Gale crater, Mars

Fine-scale (submillimeter to centimeter) depositional and diagenetic features encountered during the Curiosity rover's traverse in Gale crater provide a means to understand the geologic history of Vera Rubin ridge (VRR). VRR is a topographically high feature on the lower north slope of Aeolis Mons, a 5-km high stratified mound within Gale crater. We use high-spatial resolution images from the Mars Hand Lens Imager (MAHLI) as well as grain sizes estimated with the Gini index mean score technique that uses ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical data to constrain the postdepositional history of the strata exposed on this ridge. MAHLI images were used to examine the color, grain size, and style of lamination of the host rocks, as well as to explore the occurrence of nodules, diagenetic crystals, pits, and a variety of dark-gray iron-rich features. This survey revealed abundant and widespread diagenetic features within the rocks exposed on VRR and demonstrated that rock targets estimated to be coarser generally contain more diagenetic features than those estimated to have finer grains, which indicate that grain size may have influenced the degree and type of diagenesis. A subset of rocks within VRR are gray in color and exhibit the highest proportion of diagenetic features. We suggest that these targets experienced a different diagenetic history than the other rocks on VRR and hypothesize that redistribution and recrystallization of iron within specific intervals may have resulted in both the gray color and the abundance of dark-gray iron-rich diagenetic features.

JGR Planets↗
USGS2021

Brine-driven destruction of clay minerals in Gale crater, Mars

Mars’ sedimentary rock record preserves information on geological (and potential astrobiological) processes that occurred on the planet billions of years ago. The Curiosity rover is exploring the lower reaches of Mount Sharp, in Gale crater on Mars. A traverse from Vera Rubin ridge to Glen Torridon has allowed Curiosity to examine a lateral transect of rock strata laid down in a martian lake ~3.5 billion years ago. We report spatial differences in the mineralogy of time-equivalent sedimentary rocks <400 meters apart. These differences indicate localized infiltration of silica-poor brines, generated during deposition of overlying magnesium sulfate–bearing strata. We propose that destabilization of silicate minerals driven by silica-poor brines (rarely observed on Earth) was widespread on ancient Mars, because sulfate deposits are globally distributed.

Science↗
USGS2020

Evidence for a diagenetic origin of Vera Rubin Ridge, Gale Crater, Mars: Summary and synthesis of Curiosity's exploration campaign

This paper provides an overview of the Curiosity rover's exploration at Vera Rubin ridge (VRR) and summarizes the science results. VRR is a distinct geomorphic feature on lower Aeolis Mons (informally known as Mount Sharp) that was identified in orbital data based on its distinct texture, topographic expression, and association with a hematite spectral signature. Curiosity conducted extensive remote sensing observations, acquired data on dozens of contact science targets, and drilled three outcrop samples from the ridge, as well as one outcrop sample immediately below the ridge. Our observations indicate that strata composing VRR were deposited in a predominantly lacustrine setting and are part of the Murray formation. The rocks within the ridge are chemically in family with underlying Murray formation strata. Red hematite is dispersed throughout much of the VRR bedrock, and this is the source of the orbital spectral detection. Gray hematite is also present in isolated, gray‐colored patches concentrated toward the upper elevations of VRR, and these gray patches also contain small, dark Fe‐rich nodules. We propose that VRR formed when diagenetic event(s) preferentially hardened rocks, which were subsequently eroded into a ridge by wind. Diagenesis also led to enhanced crystallization and/or cementation that deepened the ferric‐related spectral absorptions on the ridge, which helped make them readily distinguishable from orbit. Results add to existing evidence of protracted aqueous environments at Gale crater and give new insight into how diagenesis shaped Mars' rock record.

Journal of Geophysical Research: Planets↗
USGS2020

Diagenesis of Vera Rubin ridge, Gale crater, Mars from Mastcam multispectral images

Images from the Mars Science Laboratory (MSL) mission of lacustrine sedimentary rocks of Vera Rubin ridge on “Mt. Sharp” in Gale crater, Mars, have shown stark color variations from red to purple to gray. These color differences crosscut stratigraphy and are likely due to diagenetic alteration of the sediments after deposition. However, the chemistry and timing of these fluid interactions is unclear. Determining how diagenetic processes may have modified chemical and mineralogical signatures of ancient Martian environments is critical for understanding the past habitability of Mars and achieving the goals of the MSL mission. Here we use visible/near-infrared spectra from Mastcam and ChemCam to determine the mineralogical origins of color variations in the ridge. Color variations are consistent with changes in spectral properties related to the crystallinity, grain size, and texture of hematite. Coarse-grained gray hematite spectrally dominates in the gray patches and is present in the purple areas, while nanophase and fine-grained red crystalline hematite are present and spectrally dominate in the red and purple areas. We hypothesize that these differences were caused by grain-size coarsening of hematite by diagenetic fluids, as observed in terrestrial analogs. In this model, early primary reddening by oxidizing fluids near the surface was followed during or after burial by bleaching to form the gray patches, possibly with limited secondary reddening after exhumation. Diagenetic alteration may have diminished the preservation of biosignatures and changed the composition of the sediments, making it more difficult to interpret how conditions evolved in the paleolake over time.

JGR Planets↗
USGS2020

Extraformational sediment recycling on Mars

Extraformational sediment recycling (old sedimentary rock to new sedimentary rock) is a fundamental aspect of Earth’s geological record; tectonism exposes sedimentary rock, whereupon it is weathered and eroded to form new sediment that later becomes lithified. On Mars, tectonism has been minor, but two decades of orbiter instrument–based studies show that some sedimentary rocks previously buried to depths of kilometers have been exposed, by erosion, at the surface. Four locations in Gale crater, explored using the National Aeronautics and Space Administration’s Curiosity rover, exhibit sedimentary lithoclasts in sedimentary rock: At Marias Pass, they are mudstone fragments in sandstone derived from strata below an erosional unconformity; at Bimbe, they are pebble-sized sandstone and, possibly, laminated, intraclast-bearing, chemical (calcium sulfate) sediment fragments in conglomerates; at Cooperstown, they are pebble-sized fragments of sandstone within coarse sandstone; at Dingo Gap, they are cobble-sized, stratified sandstone fragments in conglomerate derived from an immediately underlying sandstone. Mars orbiter images show lithified sediment fans at the termini of canyons that incise sedimentary rock in Gale crater; these, too, consist of recycled, extraformational sediment. The recycled sediments in Gale crater are compositionally immature, indicating the dominance of physical weathering processes during the second known cycle. The observations at Marias Pass indicate that sediment eroded and removed from craters such as Gale crater during the Martian Hesperian Period could have been recycled to form new rock elsewhere. Our results permit prediction that lithified deltaic sediments at the Perseverance (landing in 2021) and Rosalind Franklin (landing in 2023) rover field sites could contain extraformational recycled sediment.

Geosphere↗
USGS2020

A lacustrine paleoenvironment recorded at Vera Rubin ridge, Gale crater: Overview of the sedimentology and stratigraphy observed by the Mars Science Laboratory Curiosity rover

For ~500 Martian solar days (sols), the Mars Science Laboratory team explored Vera Rubin ridge (VRR), a topographic feature on the northwest slope of Aeolis Mons. Here we review the sedimentary facies and stratigraphy observed during sols 1,800–2,300, covering more than 100 m of stratigraphic thickness. Curiosity's traverse includes two transects across the ridge, which enables investigation of lateral variability over a distance of ~300 m. Three informally named stratigraphic members of the Murray formation are described: Blunts Point, Pettegrove Point, and Jura, with the latter two exposed on VRR. The Blunts Point member, exposed just below the ridge, is characterized by a recessive, fine-grained facies that exhibits extensive planar lamination and is crosscut by abundant curvi-planar veins. The Pettegrove Point member is more resistant, fine-grained, thinly planar laminated, and contains a higher abundance of diagenetic concretions. Conformable above the Pettegrove Point member is the Jura member, which is also fine-grained and parallel stratified, but is marked by a distinct step in topography, which coincides with localized meter-scale inclined strata, a thinly and thickly laminated facies, and occasional crystal molds. All members record low-energy lacustrine deposition, consistent with prior observations of the Murray formation. Uncommon outcrops of low-angle stratification suggest possible subaqueous currents, and steeply inclined beds may be the result of slumping. Collectively, the rocks exposed at VRR provide additional evidence for a long-lived lacustrine environment (in excess of 10 6 years via comparison to terrestrial records of sedimentation), which extends our understanding of the duration of habitable conditions in Gale crater.

Journal of Geophysical Research: Planets↗
USGS2018

The thermophysical properties of the Bagnold Dunes, Mars: Ground truthing orbital data

We compare the thermophysical properties and particle sizes derived from the Mars Science Laboratory rover's Ground Temperature Sensor of the Bagnold dunes, specifically Namib dune, to those derived orbitally from Thermal Emission Imaging System, ultimately linking these measurements to ground truth particle sizes determined from Mars Hand Lens Imager images. In general, we find that all three datasets report consistent particle sizes for the Bagnold dunes (~110–350 μm and are within measurement and model uncertainties), indicating that particle sizes of homogeneous materials inferred from temperature measurements and thermophysical models are reliable. Furthermore, we examine the effects of two physical characteristics that could influence the modeled thermal inertia and particle sizes, including (1) fine‐scale (centimeter to meter scale) ripples and (2) thin layering of indurated/armored materials. To first order, we find that small‐scale ripples and thin (approximately centimeter scale) layers do not significantly affect the determination of bulk thermal inertia from orbital thermal data using a single nighttime temperature. Modeling of a layer of coarse or indurated material reveals that a thin layer (< ~5 mm; similar to what was observed by the Curiosity rover) would not significantly change the observed thermal properties of the surface and would be dominated by the properties of the underlying material. Thermal inertia and particle sizes of relatively homogeneous materials derived from nighttime orbital data should be considered as reliable, as long as there are no significant subpixel anisothermality effects (e.g., lateral mixing of multiple thermophysically distinct materials).

Journal of Geophysical Research: Planets↗