Geology ReportsSearch

Geology topics

Kevin R. Evans

Publications and source records attributed to Kevin R. Evans.

8 recordsLinked to original sources

Proposed Auxiliary Boundary Stratigraphic Section and Point (ASSP) for the base of the Ordovician System at Lawson Cove, Utah, USA

T he Global boundary Stratotype Section and Point (GSSP) for the base of the Ordovician System is at the First Appearance Datum (FAD) of the conodont Iapetognathus fluctivagus at Green Point in Newfoundland, Canada. Strata there are typical graptolitic facies that were deposited near the base of the continental slope.We propose establishing an Auxiliary boundary Stratotype Section and Point (ASSP) at the FAD of I. fluctivagus at the Lawson Cove section in the Ibex area of Millard County, Utah, USA. There, strata consist of typical shelly facies limestones that were deposited on a tropical carbonate platform and contain abundant conodonts, trilobites, brachiopods, and other fossil groups. Cambrian and Ordovician strata in this area are ~5300m thick, with the Lawson Cove section spanning 243m in three overlapping segments. Six other measured and studied sections in the area show stratigraphic relationships similar to those at Lawson Cove. Faunas have been used to divide these strata into 14 conodont and 7 trilobite zonal units. The widespread olenid trilobite Jujuyaspis occurs ~90cm above the proposed boundary at Lawson Cove; this genus is generally regarded as earliest Ordovician. Rhynchonelliform and linguliform brachiopods are common to abundant and are useful for correlation. The FAD of Iapetognathus fluctivagus and occurrences of Jujuyaspis and the Lower Ordovician planktonic graptolite Anisograptus matanensis all occur within a 2.4m interval of strata at a nearby section. Non-biological correlation tools include a detailed sequence stratigraphic classification and a detailed carbon-isotope profile. Especially useful for correlation is a positive 13C excursion peak ~15cm below the proposed boundary horizon. All of these correlation tools form an integrated framework that makes the Lawson Cove section especially useful as an ASSP for global correlation of strata with faunas typical of shallow, warm-water, shelly facies.

Utah

Visualizing impact structures using high-resolution LiDAR-derived DEMs: A case study of two structures in Missouri

Evidence suggests that a crypto-explosive hypothesis and a meteorite impact hypothesis may be partly correct in explaining several anomalous geological features in the middle of the United States. We used a primary geographic information science (GIScience) technique of creating a digital elevation model (DEM) of two of these features that occur in Missouri. The DEMs were derived from airborne light detection and ranging, or LiDAR. Using these DEMs, we characterized the Crooked Creek structure in southern Crawford County and the Weaubleau structure in southeastern St. Clair County, Missouri. The mensuration and study of exposed and buried impact craters implies that the craters may have intrinsic dimensions which could only be produced by collision. The results show elevations varying between 276 and 348 m for Crooked Creek and between 220 and 290 m for Weaubleau structure. These new high- resolution DEMs are accurate enough to allow for precise measurements and better interpretations of geological structures, particularly jointing in the carbonate rocks, and they show greater definition of the central uplift area in the Weaubleau structure than publicly available DEMs.

Missouri

Moloka'i fieldtrip guidebook: Selected aspects of the geology, geography, and coral reefs of Moloka'i

This guidebook was compiled with the express purpose of describing the general geology of Moloka'i and those locations with significance to the U.S. Geological Survey's study of Moloka'i's coral reef, a part of the U.S. Department of Interior's 'Protecting the Nation's Reefs' program. The first portion of the guidebook describes the island and gives the historical background. Fieldtrip stop locations are listed in a logical driving order, essentially from west to east. This order may be changed, or stops deleted, depending on time and scheduling of an individual fieldtrip.

Hawaii

A digital atlas of hydrocarbon accumulations within and adjacent to the National Petroleum Reserve-Alaska (NPRA)

The United States Geological Survey (USGS) has initiated a project to reassess the hydrocarbon potential of the NPRA. Although exploration for hydrocarbons in the NPRA was initiated in 1944, it has taken fifty years for the first commercial discovery to be made. That discovery, the Alpine field (projected recoverable reserves of 430 million barrels), was made in 1994 along the eastern boundary of the NPRA. This field produces from a formation heretofore considered to be mostly a source rock. The Alpine discovery made such a reassessment necessary. As part of this assessment, we have compiled stratigraphic, structural, petrophysical, and seismic data related to nineteen accumulations within and nearby the NPRA. The goal is to provide basic documentation and a set of analog accumulations for the new assessment. The first two displays of this atlas consist of a location map and a stratigraphic column showing the stratigraphic settings for the primary reservoir and source rocks for these accumulations. The third display is a table listing each accumulation and providing the hydrocarbon fluid type, reservoir, operator, status, and discovery well and date for each. Compilation of basic information for each individual accumulation follows these displays. A typical compilation includes a structurecontour map on or near the reservoir horizon, a log display of the discovery well with reservoir characteristics along with figures for recoverable volumes, and one or two seismic lines across or near the accumulation.

Alaska

Map of Distribution of Bottom Sediments on the Continental Shelf, Gulf of Alaska

Introduction The U.S. Geological Survey has a long history of exploring marine geology in the Gulf of Alaska. As part of a cooperative program with other federal and state agencies, the USGS is investigating the relations between ocean-floor geology and benthic marine biohabitats. This bottom sediment map, compiled from published literature will help marine biologists develop an understanding of sea-floor geology in relation to various biological habitats. The pattern of sea-floor sedimentation and bottom morphology in the Gulf of Alaska reflects a complex interplay of regional tectonism, glacial advances and retreats, oceanic and tidal currents, waves, storms, eustatic change, and gravity-driven processes. This map, based on numerous cruises during the period of 1970-1996, shows distribution of bottom sediments in areas of study on the continental shelf. The samples were collected with piston, box, and gravity corers, and grab samplers. The interpretations of sediment distribution are the products of sediment size analyses combined with interpretations of high-resolution seismic reflection profiles. The sea floor was separated into several areas as follows: Cook Inlet -- Hazards studies in this embayment emphasized sediment distribution, sediment dynamics, bedforms, shallow faults, and seafloor stability. Migrating mega-sandwaves, driven by strong tidal currents, influence seabed habitats and stability of the seafloor, especially near pipelines and drilling platforms. The coarseness of the bottom sediment reinforces the influence of the strong tidal currents on the seafloor habitats. Kodiak Shelf -- Tectonic framework studies demonstrate the development of an accretionary wedge as the Pacific Plate underthrusts the Alaskan landmass. Seismic data across the accretionary wedge reveal anomalies indicative of fluid/gas vent sites in this segment of the continental margin. Geologic hazards research shows that movement along numerous shallow faults poses a risk to sea floor structures. Sea-floor sediment on shallow banks is eroded by seasonal wave-generated currents. The winnowing action of the large storm waves results in concentrations of gravel over broad segments of the Kodiak shelf. Northeastern Gulf of Alaska -- Tectonic framework studies demonstrate that rocks of distant origin (Yakutat terrane) are currently attached to and moving with the Pacific Plate, as it collides with and is subducted beneath southern Alaska. This collision process has led to pronounced structural deformation of the continental margin and adjacent southern Alaska. Consequences include rapidly rising mountains and high fluvial and glacial sedimentation rates on the adjacent margin and ocean floor. The northeastern Gulf of Alaska shelf also has concentrations of winnowed (lag) gravel on Tarr Bank and on the outer shelf southeast of Yakutat Bay. Between Kayak Island and Yakutat Bay the outer shelf consists of pebbly mud (diamict). This diamict is a product of glacial marine sedimentation during the Pleistocene and is present today as a relict sediment. A prograding wedge of Holocene sediment consisting of nearshore sand grading seaward into clayey silt and silty clay covers the relict pebbly mud to mid-shelf and beyond. Shelf and slope channel systems transport glacially derived sediment across the continental margin into Surveyor Channel, an abyssal fan and channel system that reaches over 1,000 km to the Aleutian Trench.

Miscellaneous Field Studies Map

Thermal maturity of sedimentary rocks in Alaska: Digital resources

This CD-ROM is an updated re-release of three USGS publications on the thermal maturity of sedimentary rocks in Alaska: 1) Vitrinite reflectance and conodont color alteration index data from Alaska; data to accompany the thermal maturity map of Alaska; Open-File Report 92-409 (1992), version 1.1 (revised 1999), 2) Generalized thermal maturity map of Alaska; Miscellaneous Geologic Investigations Map I-2494, scale 1:2,500,000 (1996), 3) Thermal evolution of sedimentary basins in Alaska; Bulletin 2142, 131 p. (1996).

Alaska