Geology Reports⌕ Search

Geology topics

Katherine R. Barnhart

Publications and source records attributed to Katherine R. Barnhart.

30 records · Page 2Linked to original sources

Forecasting the inundation of postfire debris flows

In the semi-arid regions of the western United States, postfire debris flows are typically runoff generated. The U.S. Geological Survey has been studying the mechanisms of postfire debris-flow initiation for multiple decades to generate operational models for forecasting the timing, location, and magnitude of postfire debris flows. Here we discuss challenges and progress for extending operational capabilities to include modeling postfire debris-flow inundation extent. Analysis of volume and impacted area scaling relationships indicated that postfire debris flows do not conform to assumptions of geometric self-similarity. We documented sensitivity of impacted areas to rainfall intensity using a candidate methodology for generating inundation hazard assessments. Our results emphasize the importance of direct measurements of debris-flow volume, inundated area, and high temporal resolution rainfall intensity.

California↗

Runout model evaluation based on back-calculation of building damage

We evaluated the ability of three debris-flow runout models (RAMMS, FLO2D and D-Claw) to predict the number of damaged buildings in simulations of the 9 January 2019 Montecito, California, debris-flow event. Observations of building damage after the event were combined with OpenStreetMap building footprints to construct a database of all potentially impacted buildings. At the estimated event volume, all models overpredict the number of damaged buildings by a factor of 1.5–3.

California↗

Debris-flow process controls on steepland morphology in the San Gabriel Mountains, California

Steep landscapes evolve largely by debris flows, in addition to fluvial and hillslope processes. Abundant field observations document that debris flows incise valley bottoms and transport substantial sediment volumes, yet their contributions to steepland morphology remain uncertain. This has, in turn, limited the development of debris-flow incision rate formulations that produce morphology consistent with natural landscapes. In many landscapes, including the San Gabriel Mountains (SGM), California, steady-state fluvial channel longitudinal profiles are concave-up and exhibit a power-law relationship between channel slope and drainage area. At low drainage areas, however, valley slopes become nearly constant. These topographic forms result in a characteristically curved slope-area signature in log-log space. Here, we use a one-dimensional landform evolution model that incorporates debris-flow erosion to reproduce the relationship between this curved slope-area signature and erosion rate in the SGM. Topographic analysis indicates that the drainage area at which steepland valleys transition to fluvial channels correlates with measured erosion rates in the SGM, and our model results reproduce these relationships. Further, the model only produces realistic valley profiles when parameters that dictate the relationship between debris-flow erosion, valley-bottom slope, and debris-flow depth are within a narrow range. This result helps place constraints on the mathematical form of a debris-flow incision law. Finally, modeled fluvial incision outpaces debris-flow erosion at drainage areas less than those at which valleys morphologically transition from near-invariant slopes to concave profiles. This result emphasizes the critical role of debris-flow incision for setting steepland form, even as fluvial incision becomes the dominant incisional process.

California↗

The influence of large woody debris on post-wildfire debris flow sediment storage

Debris flows transport large quantities of water and granular material, such as sediment and wood, and this mixture can have devastating impacts on life and infrastructure. The proportion of large woody debris (LWD) incorporated into debris flows can be enhanced in forested areas recently burned by wildfire, because wood recruitment into channels accelerates in burned forests. In this study, we explored how LWD transported in post-wildfire debris flows acts to retain sediment within small headwater channels. We found that the largest amount of debris flow sediment is stored in channel reaches with a ratio of LWD length to channel width between 0.25 and 1. Moreover, the largest debris flow deposits forced by LWD were found in low-angle channel reaches. We examined two models for debris flow volume estimation: (1) the current volume prediction model used in U.S. Geological Survey debris flow hazard assessments, and (2) a regional model developed to predict the sediment yield associated with debris-laden flows. We found that the regional model better matched the magnitude of the observed sediment at the terminal fan, suggesting the utility of regionally calibrated parameters for debris flow volume prediction. However, large wood created sediment storage upstream of the terminal fan, and this volume was of the same magnitude as the total volume at the terminal fans. Finally, we demonstrate a method for estimating debris flow velocity based on estimates of the critical velocity required to break wood, which can be used in future field studies to estimate minimum debris flow velocity values.

New Mexico↗

User needs assessment for postfire debris-flow inundation hazard products

Debris flows are a type of mass movement that is more likely after wildfires, and while existing hazard assessments evaluate the rainfall intensities that are likely to trigger debris flows, no operational hazard assessment exists for identifying the areas where they will run out after initiation. Fifteen participants who work in a wide range of job functions associated with southern California postfire hazards were selected using purposive sampling for unstructured interviews about useful characteristics and needs for postfire debris-flow inundation hazard assessments. The interview guide was developed by a team of social and physical scientists following best practices for engaging with users. The guide focused on target information that could influence ongoing or not-yet-initiated research on debris-flow physics and hazard assessment methodology. Following standard methods for user needs assessment, the audio from the unstructured interviews was recorded, transcribed, and analyzed using a thematic coding scheme. Participants reported engaging with postfire debris-flow inundation as one of multiple postfire hazards and their information needs reflect this breadth. Most participants were from organizations with life and property mandates, and this focused their concerns on where debris-flow inundation could impact people’s physical safety, the ability of populations to egress, and damage to property. Common comments included, (1) the need to interpret inundation hazard assessments in the context of forecast rainfall—which are typically associated with different timeframes, 15 and 60 minutes, respectively; (2) the need to provide multiple scenarios in a hazard assessment to show how the hazard changes under different external factors such as varying rainfall intensity; and (3) the tension between fully reflecting all sources of uncertainty in identifying impacted areas and a high level of precision needed to determine evacuation zones in order to reduce evacuation fatigue. Participants saw utility in both low-resolution hazard assessments over large areas and fine-resolution targeted assessments over small areas, noting that the identification of target areas could pose an ethical challenge because some areas might be prioritized over others. Participants were concerned about the hazard posed by the continuum of postfire hydrologic hazards, including hyperconcentrated flows. Finally, participants recognized that the shrinking time window between the end of fire season and the start of the wet season in southern California makes the production, interpretation, and use of rapid postfire debris-flow inundation hazard assessments both important and challenging.

California↗

Simulating debris flow and levee formation in the 2D shallow flow model D-Claw: Channelized and unconfined flow

Debris flow runout poses a hazard to life and infrastructure. The expansion of human population into mountainous areas and onto alluvial fans increases the need to predict and mitigate debris flow runout hazards. Debris flows on unconfined alluvial fans can exhibit spontaneous self-channelization through levee formation that reduces lateral spreading and extends runout distances compared to unchannelized flows. Here we modify the D-Claw shallow flow model in two ways that are hypothesized to generate levees. We evaluate these modifications with observations from a large-scale flume experiment. We investigate model performance when including the effect of two different friction sub-models, as well as the inclusion of segregation effects on granular permeability. Results show that, for a wide range of plausible model input parameters, simulations including the effects of segregation promoted modeled levee formation, whereas simulations without the effects of segregation did not create levees. Further, using a forward predictive framework, simulations with the effects of segregation were more likely to better model the magnitude of debris flow depth and runout distance, whereas simulation timing of the debris flow was affected by the choice of friction sub-model. Our results indicate that including the effects of segregation on granular permeability can improve the likelihood of better predictions of debris flow depth and runout prior to an event occurring.

Earth and Space Science↗

New model of the Barry Arm landslide in Alaska reveals potential tsunami wave heights of 2 meters, values much lower than previously estimated

The retreat of Barry Glacier has contributed to the destabilization of slopes in Barry Arm, creating the possibility that a landslide could rapidly enter the fjord and trigger a tsunami. The U.S. Geological Survey (USGS) recently released a report documenting potential tsunami wave heights in the event of a large, fast-moving landslide at the Barry Arm fiord near Prince William Sound, Alaska (Barnhart and others, 2021). This new work shows that the largest plausible wave height is smaller than initial estimates published in Dai and others (2020), but waves still represent a substantial hazard to the people who live, work, and recreate in Prince William Sound. Thus, it is important that residents and visitors remain informed about this hazard and prepare accordingly.

Alaska↗

Multi-model comparison of computed debris flow runout for the 9 January 2018 Montecito, California post-wildfire event

Hazard assessment for post-wildfire debris flows, which are common in the steep terrain of the western United States, has focused on the susceptibility of upstream basins to generate debris flows. However, reducing public exposure to this hazard also requires an assessment of hazards in downstream areas that might be inundated during debris flow runout. Debris flow runout models are widely available, but their application to hazard assessment for post-wildfire debris flows has not been extensively tested. Necessary inputs to these models include the total volume of the mobilized flow, flow properties (either inherent material properties or calibration coefficients), and site topography. Estimates of volume are possible in post-event (“back calculation”) studies, yet before an event, volume is an uncertain quantity. We simulated debris flow runout for the well-constrained 9 January 2018 Montecito event using three models (RAMMS, FLO2D, and D-Claw) to determine the relative importance of volume and flow properties. We broke the impacted area into three domains, and for each model-domain combination, we performed a numerical sampling study in which volume and flow properties varied within a wide, but plausible range. We assessed model performance based on inundation patterns and peak flow depths. We found all models could simulate the event with comparable results. Simulation performance was most sensitive to flow volume and less sensitive to flow properties. Our results emphasize the importance of reducing uncertainty in pre-event estimates of flow volume for hazard assessment.

California↗

Preliminary assessment of the wave generating potential from landslides at Barry Arm, Prince William Sound, Alaska

We simulated the concurrent rapid motion of landslides on an unstable slope at Barry Arm, Alaska. Movement of landslides into the adjacent fjord displaced fjord water and generated a tsunami, which propagated out of Barry Arm. Rather than assuming an initial sea surface height, velocity, and location for the tsunami, we generated the tsunami directly using a model capable of simulating the dynamics of both water and landslide material. The fjord below most of the landslide source area was occupied by the Barry Glacier until about 2012; therefore, our direct simulation of tsunami generation by landslide motion required new topographic and bathymetric data, which was collected in 2020. The topographic data also constrained landslide geometries and volumes. We considered four scenarios based on two landslide volumes and two landslide mobilities—a more mobile, contractive landslide and a less mobile, noncontractive landslide. The larger of the two volumes is 689 × 10 6 cubic meters (m 3 )—larger than the volume estimate in a previous study—and reflects the largest plausible volume given current observational data. The considered scenario that generated the largest wave heights resulted in forecast wave heights of over 200 meters (m) in the northern part of Barry Arm, adjacent to the landslide source area and runup on the opposite fjord wall in excess of 500 m. Simulated wave heights in excess of 5 m in southern Barry Arm and in Harriman Fjord occurred within 10–15 minutes (min) of landslide motion. The simulated tsunami reached Whittier, Alaska, approximately 20 min after initial rapid landslide motion, with peak heights of just over 2 m in Passage Fjord, 500 m offshore Whittier, occurring 26 min after initial rapid motion. Time of peak wave heights was consistent with previous modeling. Although results are preliminary and can be refined with additional observations and analyses, they provide a refined assessment of the upper bound of the hazard presented by the Barry Arm landslides. The results herein support the National Oceanic and Atmospheric Administration’s National Tsunami Warning Center mission to detect, forecast, and warn for tsunamis in Alaska.

Alaska↗

Postwildfire soil‐hydraulic recovery and the persistence of debris flow hazards

Deadly and destructive debris flows often follow wildfire, but understanding of changes in the hazard potential with time since fire is poor. We develop a simulation‐based framework to quantify changes in the hydrologic triggering conditions for debris flows as postwildfire infiltration properties evolve through time. Our approach produces time‐varying rainfall intensity‐duration thresholds for runoff‐ and infiltration‐generated debris flows with physics‐based hydrologic simulations that are parameterized with widely available hydroclimatic, vegetation reflectance, and soil texture data. When we apply our thresholding protocol to a test case in the San Gabriel Mountains (California, USA), the results are consistent with existing regional empirical thresholds and rainstorms that caused runoff‐ and infiltration‐generated debris flows soon after and three years following a wildfire, respectively. We find that the hydrologic triggering mechanisms for the two observed debris flow types are coupled with the effects of fire on the soil saturated hydraulic conductivity. Specifically, the rainfall intensity needed to generate debris flows via runoff increases with time following wildfire while the rainfall duration needed to produce debris flows via subsurface pore‐water pressures decreases. We also find that variations in soil moisture, rainfall climatology, median grain size, and root reinforcement could impact the median annual probability of postwildfire debris flows. We conclude that a simulation‐based method for calculating rainfall thresholds is a tractable approach to improve situational awareness of debris flow hazard in the years following wildfire. Further development of our framework will be important to quantify postwildfire hazard levels in variable climates, vegetation types, and fire regimes.

Journal of Geophysical Research: Earth Surface↗

Offset channels may not accurately record strike-slip fault displacement: Evidence from landscape evolution models

Slip distribution, slip rate, and slip per event for strike‐slip faults are commonly determined by correlating offset stream channels—under the assumption that they record seismic slip—but offset channels are formed by the interplay of tectonic and geomorphic processes. To constrain offset channel development under known tectonic and geomorphic conditions, we use numerical landscape evolution simulations along a theoretical strike‐slip fault with uniform and steady uplift, erosion, and diffusion. We investigate the influence of four tectonic parameters (fault zone width, earthquake recurrence interval, variance of the recurrence interval, and total slip relative to channel spacing) on offset channel development through multiple earthquake cycles. Analysis of >3,000 automatically measured offsets from >135 simulations suggests ~30% variability in individual measurements, but modeled displacement is recovered by averaging multiple measurements. However, the average of multiple offset measurements systematically underestimates modeled slip except when the fault zone is less than ~5 m wide, total slip is less than channel spacing, and offsets are measured shortly after an earthquake. In these simulations, postearthquake landscape evolution widens the geomorphic expression of the fault zone and modifies apparent channel offsets. We distinguish this “geomorphic fault zone” from the tectonic fault zone (zone of coseismic distributed deformation). This study highlights the capability of landscape evolution models to explore a range of conditions not easily defined in natural examples and the importance of averaging multiple measurements. Our results verify that paleoseismic studies must consider how geomorphic change has modified offset markers and use caution interpreting slip histories with multiple earthquakes.

Journal of Geophysical Research Solid Earth↗

Modeling erosion of ice-rich permafrost bluffs along the Alaskan Beaufort Sea coast

The Arctic climate is changing, inducing accelerating retreat of ice-rich permafrost coastal bluffs. Along Alaska’s Beaufort Sea coast, erosion rates have increased roughly threefold from 6.8 to 19 m yr −1 since 1955 while the sea ice-free season has increased roughly twofold from 45 to 100 days since 1979. We develop a numerical model of bluff retreat to assess the relative roles of the length of sea ice-free season, sea level, water temperature, nearshore wavefield, and permafrost temperature in controlling erosion rates in this setting. The model captures the processes of erosion observed in short-term monitoring experiments along the Beaufort Sea coast, including evolution of melt notches, topple of ice wedge-bounded blocks, and degradation of these blocks. Model results agree with time-lapse imagery of bluff evolution and time series of ocean-based instrumentation. Erosion is highly episodic with 40% of erosion is accomplished during less than 5% of the sea ice-free season. Among the formulations of the submarine erosion rate we assessed, we advocate those that employ both water temperature and nearshore wavefield. As high water levels are a prerequisite for erosion, any future changes that increase the frequency with which water levels exceed the base of the bluffs will increase rates of coastal erosion. The certain increases in sea level and potential changes in storminess will both contribute to this effect. As water temperature also influences erosion rates, any further expansion of the sea ice-free season into the midsummer period of greatest insolation is likely to result in an additional increase in coastal retreat rates.

Alaska↗