Katherine E. Potter | Geology Reports

USGS2012

Construction diagrams, geophysical logs, and lithologic descriptions for boreholes USGS 103, 105, 108, 131, 135, NRF-15, and NRF-16, Idaho National Laboratory, Idaho

This report, prepared in cooperation with the U.S. Department of Energy, summarizes construction, geophysical, and lithologic data collected from about 4,509 feet of core from seven boreholes deepened or drilled by the U.S. Geological Survey (USGS), Idaho National Laboratory (INL) Project Office, from 2006 to 2009 at the INL. USGS 103, 105, 108, and 131 were deepened and cored from 759 to 1,307 feet, 800 to 1,409 feet, 760 to 1,218 feet, and 808 to 1,239 feet, respectively. Boreholes USGS 135, NRF-15, and NRF-16 were drilled and continuously cored from land surface to 1,198, 759, and 425 feet, respectively. Cores were photographed and digitally logged by using commercially available software. Borehole descriptions summarize location, completion date, and amount and type of core recovered.

Idaho↗

USGS2011

Hotspot: The Snake River geothermal drilling project - An overview

The Snake River volcanic province (SRP) overlies a thermal anomaly that extends deep into the mantle; it represents one of the highest heat flow provinces in North America, and an area with the highest calculated geothermal gradients. This makes the SRP one of the potentially highest producing geothermal districts in the United States. Elevated heat flow is typically highest along the margins of the topographic Snake River Plain and lowest along the axis of the plain, where thermal gradients are suppressed by the Snake River aquifer. Beneath this aquifer, however, thermal gradients rise again and may tap even higher heat flows associated with the intrusion of mafic magmas into a geophysically-imaged mid-crustal sill complex. The primary goal of this project is to evaluate geothermal potential in three distinct settings: (1) the high sub-aquifer geothermal gradient associated with the intrusion of mafic magmas and the release of crustal fluids from the associated wall rocks, (2) the valley-margin settings where surface heat flow may be driven by the up-flow of hot fluids along buried caldera ring-fault complexes, and (3) a more traditional fault-bounded basin with thick sedimentary cover. All settings are found within the central or western Snake River Plain and represent previously untested targets for geothermal exploration. Our first drill site tests the extent of geothermal resources along the axis of the plain, beneath the Snake River aquifer, in an area where elevated groundwater temperatures imply a significant flux of conductive or advective heat flow from below. Our second drill site assesses the geothermal potential of up-flow zones along a buried caldera margin, in an area of known geothermal potential (Twin Falls geothermal district). Further studies will include seismic reflection-refraction surveys, gravity-magnetic surveys, and downhole geophysical logs.

Idaho↗