Geology ReportsSearch

Geology topics

Jonathon C. Scott

Publications and source records attributed to Jonathon C. Scott.

7 recordsLinked to original sources

User’s manual for the National Water Information System of the U.S. Geological Survey: Water-Quality System

This user documentation is designed to be a reference for the quality of water (QW) programs within the National Water Information System (NWIS). If you are a new user, the “Introduction” and “Getting Started” sections may be the right place for you to start. If you are an experienced user, you may want to go straight to the details provided in the “Program” section (section 3). Code lists and some miscellaneous reference materials are provided in the Appendices. The last section, “Tip Sheets,” is a collection of suggestions for accomplishing selected tasks, some of which are basic and some are advanced. These tip sheets are referenced in the main text of the documentation where appropriate.

Open-File Report

Software for analysis of chemical mixtures--composition, occurrence, distribution, and possible toxicity

The composition, occurrence, distribution, and possible toxicity of chemical mixtures in the environment are research concerns of the U.S. Geological Survey and others. The presence of specific chemical mixtures may serve as indicators of natural phenomena or human-caused events. Chemical mixtures may also have ecological, industrial, geochemical, or toxicological effects. Chemical-mixture occurrences vary by analyte composition and concentration. Four related computer programs have been developed by the National Water-Quality Assessment Program of the U.S. Geological Survey for research of chemical-mixture compositions, occurrences, distributions, and possible toxicities. The compositions and occurrences are identified for the user-supplied data, and therefore the resultant counts are constrained by the user’s choices for the selection of chemicals, reporting limits for the analytical methods, spatial coverage, and time span for the data supplied. The distribution of chemical mixtures may be spatial, temporal, and (or) related to some other variable, such as chemical usage. Possible toxicities optionally are estimated from user-supplied benchmark data. The software for the analysis of chemical mixtures described in this report is designed to work with chemical-analysis data files retrieved from the U.S. Geological Survey National Water Information System but can also be used with appropriately formatted data from other sources. Installation and usage of the mixture software are documented. This mixture software was designed to function with minimal changes on a variety of computer-operating systems. To obtain the software described herein and other U.S. Geological Survey software, visit http://water.usgs.gov/software/.

Scientific Investigations Report

Organic contaminants, trace and major elements, and nutrients in water and sediment sampled in response to the Deepwater Horizon oil spill

Beach water and sediment samples were collected along the Gulf of Mexico coast to assess differences in contaminant concentrations before and after landfall of Macondo-1 well oil released into the Gulf of Mexico from the sinking of the British Petroleum Corporation's Deepwater Horizon drilling platform. Samples were collected at 70 coastal sites between May 7 and July 7, 2010, to document baseline, or "pre-landfall" conditions. A subset of 48 sites was resampled during October 4 to 14, 2010, after oil had made landfall on the Gulf of Mexico coast, called the "post-landfall" sampling period, to determine if actionable concentrations of oil were present along shorelines. Few organic contaminants were detected in water; their detection frequencies generally were low and similar in pre-landfall and post-landfall samples. Only one organic contaminant--toluene--had significantly higher concentrations in post-landfall than pre-landfall water samples. No water samples exceeded any human-health benchmarks, and only one post-landfall water sample exceeded an aquatic-life benchmark--the toxic-unit benchmark for polycyclic aromatic hydrocarbons (PAH) mixtures. In sediment, concentrations of 3 parent PAHs and 17 alkylated PAH groups were significantly higher in post-landfall samples than pre-landfall samples. One pre-landfall sample from Texas exceeded the sediment toxic-unit benchmark for PAH mixtures; this site was not sampled during the post-landfall period. Empirical upper screening-value benchmarks for PAHs in sediment were exceeded at 37 percent of post-landfall samples and 22 percent of pre-landfall samples, but there was no significant difference in the proportion of samples exceeding benchmarks between paired pre-landfall and post-landfall samples. Seven sites had the largest concentration differences between post-landfall and pre-landfall samples for 15 alkylated PAHs. Five of these seven sites, located in Louisiana, Mississippi, and Alabama, had diagnostic geochemical evidence of Macondo-1 oil in post-landfall sediments and tarballs. For trace and major elements in water, analytical reporting levels for several elements were high and variable. No human-health benchmarks were exceeded, although these were available for only two elements. Aquatic-life benchmarks for trace elements were exceeded in 47 percent of water samples overall. The elements responsible for the most exceedances in post-landfall samples were boron, copper, and manganese. Benchmark exceedances in water could be substantially underestimated because some samples had reporting levels higher than the applicable benchmarks (such as cobalt, copper, lead and zinc) and some elements (such as boron and vanadium) were analyzed in samples from only one sampling period. For trace elements in whole sediment, empirical upper screening-value benchmarks were exceeded in 57 percent of post-landfall samples and 40 percent of pre-landfall samples, but there was no significant difference in the proportion of samples exceeding benchmarks between paired pre-landfall and post-landfall samples. Benchmark exceedance frequencies could be conservatively high because they are based on measurements of total trace-element concentrations in sediment. In the less than 63-micrometer sediment fraction, one or more trace or major elements were anthropogenically enriched relative to national baseline values for U.S. streams for all sediment samples except one. Sixteen percent of sediment samples exceeded upper screening-value benchmarks for, and were enriched in, one or more of the following elements: barium, vanadium, aluminum, manganese, arsenic, chromium, and cobalt. These samples were evenly divided between the sampling periods. Aquatic-life benchmarks were frequently exceeded along the Gulf of Mexico coast by trace elements in both water and sediment and by PAHs in sediment. For the most part, however, significant differences between pre-landfall and post-landfall samples were limited to concentrations of PAHs in sediment. At five sites along the coast, the higher post-landfall concentrations of PAHs were associated with diagnostic geochemical evidence of Deepwater Horizon Macondo-1 oil.

Alabama, Arkansas, Florida, Georgia, Louisiana, Te

Organic contaminants, trace and major elements, and nutrients in water and sediment sampled in response to the Deepwater Horizon oil spill

Beach water and sediment samples were collected along the Gulf of Mexico coast to assess differences in contaminant concentrations before and after landfall of Macondo-1 well oil released into the Gulf of Mexico from the sinking of the British Petroleum Corporation's Deepwater Horizon drilling platform. Samples were collected at 70 coastal sites on the Gulf of Mexico between May 7 and July 7, 2010, to document baseline, "pre-landfall" conditions. A subset of these sites was resampled during October 4 to 14, 2010, after oil had made landfall on the Gulf of Mexico coast ("post-landfall") to determine if actionable concentrations of oil were present along shorelines. Few organic contaminants were detected in water; their detection frequencies were generally low and similar in pre-landfall and post-landfall samples. Only one organic contaminant, toluene, had significantly higher concentrations in post-landfall than pre-landfall water samples. No samples exceeded any human-health benchmarks, and only one sample exceeded an aquatic-life benchmark-the toxic-unit benchmark for polycyclic aromatic hydrocarbons (PAH) mixtures was exceeded in one post-landfall water sample from Louisiana. No exceedance was observed in the corresponding pre-landfall water sample at this site. In sediment, several PAHs were detected at over 20 percent of sites. Concentrations of 3 parent PAHs and 17 alkylated PAH groups were significantly higher in post-landfall samples than pre-landfall samples. One pre-landfall sample from Texas exceeded the sediment toxic-unit benchmark for PAH mixtures; this site was not sampled during the post-landfall period, so no comparison between sampling periods could be made. Twenty-seven percent of sediment samples exceeded empirical sediment-quality benchmarks (upper screening values) for PAHs, indicating these samples are in the probable-effect range. A higher percentage of post-landfall samples exceeded upper screening-value benchmarks (37 percent) than did pre-landfall samples (22 percent), but there was no significant difference in the proportion of samples exceeding one or more benchmarks between paired pre-landfall and post-landfall samples. Seven sites had the largest concentration differences between post-landfall and pre-landfall samples for fifteen alkylated PAHs. Five of these seven sites (1 site in Louisiana, 1 in Mississippi, and 3 in Alabama) were identified on the basis of diagnostic geochemical biomarkers as containing Macondo-1 oil in post-landfall sediments and tarballs, as described in a companion report by Rosenbauer and others (2010). For trace and major elements in water, analytical reporting levels for several elements were highly variable; after censoring to a common reporting threshold, concentrations were significantly different between pre-landfall and post-landfall samples for a few elements, all of which are elements in seawater. No human-health benchmarks were exceeded, although these were available for only two elements. Aquatic-life benchmarks for trace elements were exceeded in almost 50 percent of water samples. Post-landfall samples exceeded one or more acute benchmarks in 21 percent, and chronic benchmarks in 93 percent of samples, compared to 1 percent (acute) and 39 percent (chronic) for pre-landfall samples. The elements responsible for the most exceedances in post-landfall samples were boron (48 samples), copper (22), and manganese (12). Nickel and vanadium, which U.S. Environmental Protection Agency specifically identified as relevant to the oil spill, were responsible for exceedances in only one of the fifty-two post-landfall samples with exceedances. These results represent the minimum number of exceedances for several trace elements because a substantial number of samples could not be compared with benchmarks because the element was determined during only one sampling period (boron and vanadium) or the reporting level for the sample was higher than the applicable benchmark value (for example, cobalt, copper, lead, and nickel). The high and variable reporting levels for trace elements in water also precluded the statistical comparison between sampling periods of the proportion of samples exceeding benchmarks. For trace elements in whole (unsieved) sediment, 47 percent of samples exceeded empirical upper screening-value benchmarks, indicating these samples are in the probable-effect range. However, there was no significant difference in the proportion of samples exceeding one or more benchmarks between paired pre-landfall post-landfall samples. Benchmark exceedance frequencies could be conservatively high, because they are based on measurements of total trace-element concentrations, including the sediment matrix. In fine sediment (the less than 63-micrometer sediment fraction), one or more trace or major elements were anthropogenically enriched relative to national baseline values for U.S. streams for almost all sediment samples (123 of 124). Sixteen percent of sediment samples exceeded upper screening-value benchmarks for, and were enriched in, one or more of the element(s) barium (in 14 samples), vanadium (5), aluminum (3), manganese (3), arsenic (2), chromium (2), and cobalt (1). These samples, collected from Louisiana and Texas, were evenly divided between the pre-landfall (9 samples) and post-landfall (10 samples) periods. Considering all the information evaluated in this report, there were significant differences between pre-landfall and post-landfall samples for PAH concentrations in sediment. Pre-landfall and post-landfall samples did not differ significantly in concentrations or benchmark exceedances for most organics in water or trace elements in sediment. For trace elements in water, aquatic-life benchmarks were exceeded in almost 50 percent of samples, but the high and variable analytical reporting levels precluded statistical comparison of benchmark exceedances between sampling periods. Concentrations of several PAH compounds in sediment were significantly higher in post-landfall samples than pre-landfall samples, and five of seven sites with the largest differences in PAH concentrations also had diagnostic geochemical evidence of Deepwater Horizon Macondo-1 oil from Rosenbauer and others (2010).

Open-File Report

Digital atlas of the upper Washita River basin, southwestern Oklahoma

Numerous types of environmental data have been collected in the upper Washita River basin in southwestern Oklahoma. However, to date these data have not been compiled into a format that can be comprehensively queried for the purpose of evaluating the effects of various conservation practices implemented to reduce agricultural runoff and erosion in parts of the upper Washita River basin. This U.S. Geological Survey publication, 'Digital atlas of the upper Washita River basin, southwestern Oklahoma' was created to assist with environmental analysis. This atlas contains 30 spatial data sets that can be used in environmental assessment and decision making for the upper Washita River basin. This digital atlas includes U.S. Geological Survey sampling sites and associated water-quality, biological, water-level, and streamflow data collected from 1903 to 2005. The data were retrieved from the U.S. Geological Survey National Water Information System database on September 29, 2005. Data sets are from the Geology, Geography, and Water disciplines of the U.S. Geological Survey and cover parts of Beckham, Caddo, Canadian, Comanche, Custer, Dewey, Grady, Kiowa, and Washita Counties in southwestern Oklahoma. A bibliography of past reports from the U.S. Geological Survey and other State and Federal agencies from 1949 to 2004 is included in the atlas. Additionally, reports by Becker (2001), Martin (2002), Fairchild and others (2004), and Miller and Stanley (2005) are provided in electronic format.

Data Series

User's manual for the National Water Information Systemof the U.S. Geological Survey Water-Quality System

This user documentation is designed to be a reference for the Water-Quality System (QWDATA) within the National Water Information System (NWIS). For the new user, the 'Introduction' and 'Getting Started' sections are the recommended places to begin. The experienced user may want to go straight to the details provided in the program section (section 3). Code lists and some miscellaneous reference materials are provided in the Appendices. The last section, 'Tip Sheets,' is a collection of suggestions for accomplishing selected tasks, some of which are basic and some of which are advanced. Where appropriate, these Tip Sheets are referenced in the main text of the documentation.

Open-File Report

User's manual for the National Water Information System of the U.S. Geological Survey (USGS), Water-quality System (QWDATA)

This user documentation is designed to be a reference for the Water-Quality System (QWDATA) within the National Water Information System (NWIS). For the new user, the 'Introduction' and 'Getting Started' sections are the recommended places to begin. The experienced user may want to go straight to the details provided in the program section (section 3). Code lists and some miscellaneous reference materials are provided in the Appendices. The last section, 'Tip Sheets,' is a collection of suggestions for accomplishing selected tasks, some of which are basic and some of which are advanced. Where appropriate, these Tip Sheets are referenced in the main text of the documentation.

Open-File Report