Geology ReportsSearch

Geology topics

John R. Gray

Publications and source records attributed to John R. Gray.

47 records · Page 3Linked to original sources

StreamStats: a U.S. geological survey web site for stream information

The U.S. Geological Survey has developed a Web application, named StreamStats, for providing streamflow statistics, such as the 100-year flood and the 7-day, 10-year low flow, to the public. Statistics can be obtained for data-collection stations and for ungaged sites. Streamflow statistics are needed for water-resources planning and management; for design of bridges, culverts, and flood-control structures; and for many other purposes. StreamStats users can point and click on data-collection stations shown on a map in their Web browser window to obtain previously determined streamflow statistics and other information for the stations. Users also can point and click on any stream shown on the map to get estimates of streamflow statistics for ungaged sites. StreamStats determines the watershed boundaries and measures physical and climatic characteristics of the watersheds for the ungaged sites by use of a Geographic Information System (GIS), and then it inserts the characteristics into previously determined regression equations to estimate the streamflow statistics. Compared to manual methods, StreamStats reduces the average time needed to estimate streamflow statistics for ungaged sites from several hours to several minutes.

Conference Paper

A spatially referenced regression model (SPARROW) for suspended sediment in streams of the Conterminous U.S.

Suspended sediment has long been recognized as an important contaminant affecting water resources. Besides its direct role in determining water clarity, bridge scour and reservoir storage, sediment serves as a vehicle for the transport of many binding contaminants, including nutrients, trace metals, semi-volatile organic compounds, a nd numerous pesticides (U.S. Environmental Protection Agency, 2000a). Recent efforts to addr ess water-quality concerns through the Total Maximum Daily Load (TMDL) process have iden tified sediment as the single most prevalent cause of impairment in the Nation’s streams a nd rivers (U.S. Environmental Protection Agency, 2000b). Moreover, sediment has been identified as a medium for the tran sport and sequestration of organic carbon, playing a potentia lly important role in understa nding sources and sinks in the global carbon budget (Stallard, 1998). A comprehensive understanding of sediment fate a nd transport is considered essential to the design and implementation of effective plans for sediment management (Osterkamp and others, 1998, U.S. General Accounting Office, 1990). An exte nsive literature addr essing the problem of quantifying sediment transport has produced a nu mber of methods for estimating its flux (see Cohn, 1995, and Robertson and Roerish, 1999, for us eful surveys). The accuracy of these methods is compromised by uncertainty in the concentration measurements and by the highly episodic nature of sediment movement, particul arly when the methods are applied to smaller basins. However, for annual or decadal flux es timates, the methods are generally reliable if calibrated with extended periods of data (Robertson and Roerish, 1999). A substantial literature also supports the Universal Soil Loss Equation (U SLE) (Soil Conservation Service, 1983), an engineering method for estimating sheet and rill erosion, although the empirical credentials of the USLE have recently been questioned (Tri mble and Crosson, 2000). Conversely, relatively little direct evidence is available concerning the fate of sediment. The common practice of quantifying sediment fate with a sediment deliv ery ratio, estimated from a simple empirical relation with upstream basin area, does not artic ulate the relative importance of individual storage sites within a basin (Wolman, 1977). Rates of sediment deposition in reservoirs and flood plains can be determined from empirical measurement s , but only a limited number of sites have been monitored, and net rates of deposition or loss from other potential sinks and sources is largely unknown (Stallard, 1998). In particular, little is known about how much sediment loss from fields ultimately makes its way to stream channels, and how much sediment is subsequently stored in or lost from th e streambed (Meade and Parker, 1985, Trimble and Crosson, 2000). This paper reports on recent progress made to a ddress empirically the question of sediment fate and transport on a national scale. The model pres ented here is based on the SPAtially Referenced Regression On Watershed attr ibutes (SPARROW) methodology, fi rst used to estimate the distribution of nutrients in str eams and rivers of the United Stat es, and subsequently shown to describe land and stream processes affecting the delivery of nutrients (Smith and others, 1997, Alexander and others, 2000, Preston and Brakeb ill, 1999). The model makes use of numerous spatial datasets, available at the national level, to explain long-term sediment water-quality conditions in major streams and rivers throughou t the United States. Sediment sources are identified using sediment erosion rates from the National Resources I nventory (NRI) (Natural Resources Conservation Service, 2000) and apportioned over the landscape according to 30- meter resolution land-use information from th e National Land Cover Data set (NLCD) (U.S. Geological Survey, 2000a). More than 76,000 reservoirs from the National Inventory of Dams (NID) (U.S. Army Corps of Engin eers, 1996) are identified as pot ential sediment sinks. Other, non-anthropogenic sources and sinks are identified using soil in formation from the State Soil Survey Geographic (STATSGO) data base (Schwarz and Alexander, 1995) and spatial coverages representing surficial rock t ype and vegetative cover. The SPA RROW model empirically relates these diverse spatial datasets to estimates of long-term, mean annual sediment flux computed from concentration and flow measurements co llected over the period 1985 -95 from more than 400 monitoring stations maintained by the Na tional Stream Quality Accounting Network (Alexander and others, 1998), the National Wa ter Quality Assessment Program, and U.S. Geological Survey District offices (Turcios and Gray, in press). Th e calibrated model is used to estimate sediment flux for over 60,000 stream segments included in the River Reach File 1 (RF1) stream network (Alexander and others, 1999). SPARROW uses statis tical methods to calibrate a simple, structural model of riverine water quality, one that imposes mass ba lance in accounting for changes in contaminant flux. As applied here, the mass-balance approach facilitates the interpretation of model results in terms of physical processes affecting sediment transport, and makes possible the estimation of various rates of sediment generation and loss associated with stream channels and features of the landscape. The statistical approach provides a basi s for assessing the error of these inferred rates and of the error in extrapolated estimates of sediment flux made for streams in the RF1 network. An important implication of the holistic modeling approach adopted in this analysis is that estimates of sediment production and loss ar e based on, and therefore consistent with, measurements of in-stream flux. Other ancillary information, such as direct measurements of long-term sediment storage and release from rese rvoirs (Steffen, 1996), is incorporated into the analysis by specifying additional equations expl aining these ancillary variables. The imposition of cross-equation constraints affords this info rmation a statistically consistent weight in explaining in-stream sediment flux. Thus, the me thodology described here represents a general framework for synthesizing a wide spectrum of available information relevant to the understanding of sediment fate and transport.

Conterminous United States

Continuous automated sensing of streamflow density as a surrogate for suspended-sediment concentration sampling

A newly refined technique for continuously and automatically sensing the density of a water-sediment mixture is being tested at a U.S. Geological Survey streamflow-gaging station in Puerto Rico. Originally developed to measure crude oil density, the double bubbler instrument measures fluid density by means of pressure transducers at two elevations in a vertical water column. By subtracting the density of water from the value measured for the density of the water-sediment mixture, the concentration of suspended sediment can be estimated. Preliminary tests of the double bubbler instrument show promise but are not yet conclusive.

Conference Paper

A Synopsis of Technical Issues for Monitoring Sediment in Highway and Urban Runoff

Accurate and representative sediment data are critical for assessing the potential effects of highway and urban runoff on receiving waters. The U.S. Environmental Protection Agency identified sediment as the most widespread pollutant in the Nation's rivers and streams, affecting aquatic habitat, drinking water treatment processes, and recreational uses of rivers, lakes, and estuaries. Representative sediment data are also necessary for quantifying and interpreting concentrations, loads, and effects of trace elements and organic constituents associated with highway and urban runoff. Many technical issues associated with the collecting, processing, and analyzing of samples must be addressed to produce valid (useful for intended purposes), current, complete, and technically defensible data for local, regional, and national information needs. All aspects of sediment data-collection programs need to be evaluated, and adequate quality-control data must be collected and documented so that the comparability and representativeness of data obtained for highway- and urban-runoff studies may be assessed. Collection of representative samples for the measurement of sediment in highway and urban runoff involves a number of interrelated issues. Temporal and spatial variability in runoff result from a combination of factors, including volume and intensity of precipitation, rate of snowmelt, and features of the drainage basin such as area, slope, infiltration capacity, channel roughness, and storage characteristics. In small drainage basins such as those found in many highway and urban settings, automatic samplers are often the most suitable method for collecting samples of runoff for a variety of reasons. Indirect sediment-measurement methods are also useful as supplementary and(or) surrogate means for monitoring sediment in runoff. All of these methods have limitations in addition to benefits, which must be identified and quantified to produce representative data. Methods for processing raw sediment samples (including homogenization and subsampling) for subsequent analysis for total suspended solids or suspended-sediment concentration often increase variance and may introduce bias. Processing artifacts can be substantial if the methods used are not appropriate for the concentrations and particle-size distributions present in the samples collected. Analytical methods for determining sediment concentrations include the suspended-sediment concentration and the total suspended solids methods. Although the terms suspended-sediment concentration and total suspended solids are often used interchangeably to describe the total concentration of suspended solid-phase material, the analytical methods differ and can produce substantially different results. The total suspended solids method, which commonly is used to produce highway- and urban-runoff sediment data, may not be valid for studies of runoff water quality. Studies of fluvial and highway-runoff sediment data indicate that analyses of samples by the total suspended solids method tends to under represent the true sediment concentration, and that relations between total suspended solids and suspended-sediment concentration are not transferable from site to site even when grain-size distribution information is available. Total suspended solids data used to calculate suspended-sediment loads in highways and urban runoff may be fundamentally unreliable. Consequently, use of total suspended solids data may have adverse consequences for the assessment, design, and maintenance of sediment-removal best management practices. Therefore, it may be necessary to analyze water samples using the suspended-sediment concentration method. Data quality, comparability, and utility are important considerations in collection, processing, and analysis of sediment samples and interpretation of sediment data for highway- and urban-runoff studies. Results from sediment studies must be comparable and readily transf

Open-File Report

Comparability of suspended-sediment concentration and total suspended solids data

Two laboratory analytical methods — suspended-sediment concentration (SSC) and total suspended solids (TSS) — are predominantly used to quantify concentrations of suspended solid-phase material in surface waters of the United States. The analytical methods differ. SSC data are produced by measuring the dry weight of all the sediment from a known volume of a water-sediment mixture. TSS data are produced by several methods, most of which entail measuring the dry weight of sediment from a known volume of a subsample of the original. An evaluation of 3,235 paired SSC and TSS data, of which 860 SSC values include percentages of sand-size material, shows bias in the relation between SSC and TSS —SSC values tend to increase at a greater rate than their corresponding paired TSS values. As sand-size material in samples exceeds about a quarter of the sediment dry weight, SSC values tend to exceed their corresponding paired TSS values. TSS analyses of three sets of quality-control samples (35 samples) showed unexpectedly small sediment recoveries and relatively large variances in the TSS data. Two quality-control data sets (18 samples) that were analyzed for SSC showed both slightly deficient sediment recoveries, and variances that are characteristic of most other quality-control data compiled as part of the U.S. Geological Survey’s National Sediment Laboratory Quality Assurance Program. The method for determining TSS, which was originally designed for analyses of wastewater samples, is shown to be fundamentally unreliable for the analysis of natural-water samples. In contrast, the method for determining SSC produces relatively reliable results for samples of natural water, regardless of the amount or percentage of sand-size material in the samples. SSC and TSS data collected from natural water are not comparable and should not be used interchangeably. The accuracy and comparability of suspended solid-phase concentrations of the Nation’s natural waters would be greatly enhanced if all these data were produced by the SSC analytical method.

Water-Resources Investigations Report

Coordination and standardization of federal sedimentation activities

In August 1964, the Bureau of the Budget issued Circular A-67 to set forth guidelines for the coordination of water-data acquisition activities throughout the Federal government. The U.S. Department of the Interior was assigned the task of implementing Circular A-67, which in turn redelegated this responsibility to the U.S. Geological Survey (USGS). Delegation of the lead responsibility for water-data coordination to the USGS occurred because of its historical role as the primary agency for water-data acquisition in the United States. To provide overall leadership for implementing the provisions of Circular A-67, the USGS established the Office of Water Data Coordination in the Water Resources Division (WRD). In addition, regional and district offices of the WRD were delegated responsibility for coordinating water data within their geographic areas of responsibility. On December 10, 1991, the Office of Management and Budget issued OMB Number Memorandum M-92-01, which expands the USGS's coordination role to encompass all water information. This includes data critical to water resources in the following categories: - surface- and ground-water quality and quantity, - sediment, - constituent transport, - erosion, - water chemistry, and - precipitation information critical to water resources management. Memorandum M-92-01 covers primarily freshwater bodies and includes activities, such as "development and distribution of consensus standards, field-data collection and laboratory analytical methods, data processing and interpretation, data-base management, quality control and quality assurance, and water- resources appraisals, assessments, and investigations." Research activities are not included.

Conference Paper

A science-based, watershed strategy to support effective remediation of abandoned mine lands

A U.S. Geological Survey Abandoned Mine Lands Initiative will develop a strategy for gathering and communicating the scientific information needed to formulate effective and cost-efficient remediation of abandoned mine lands. A watershed approach will identify, characterize, and remediate contaminated sites that have the most profound effect on water and ecosystem quality within a watershed. The Initiative will be conducted during 1997 through 2001 in two pilot watersheds, the Upper Animas River watershed in Colorado and the Boulder River watershed in Montana. Initiative efforts are being coordinated with the U.S. Forest Service, Bureau of Land Management, National Park Service, and other stakeholders which are using the resulting scientific information to design and implement remediation activities. The Initiative has the following eight objective-oriented components: estimate background (pre-mining) conditions; define baseline (current) conditions; identify target sites (major contaminant sources); characterize target sites and processes affecting contaminant dispersal; characterize ecosystem health and controlling processes at target sites; develop remediation goals and monitoring network; provide an integrated, quality-assured and accessible data network; and document lessons learned for future applications of the watershed approach.

Colorado;Montana

Monitoring radionuclide and suspended-sediment transport in the Little Colorado River basin, Arizona and New Mexico, USA

From July 1988 through September 1991, radionuclide and suspended-sediment transport were monitored in ephemeral streams in the semiarid Little Colorado River basin of Arizona and New Mexico, USA, where in-stream gross-alpha plus gross-beta activities have exceeded Arizona's Maximum Allowable Limit through releases from natural weathering processes and from uranium-mining operations in the Church Rock Mining District, Grants Mineral Belt, New Mexico. Water samples were collected at a network of nine continuous-record streamgauges equipped with microprocessor-based satellite telemetry and automatic water-sampling systems, and six partial-record streamgauges equipped with passive water samplers. Analytical results from these samples were used to calculate transport of selected suspended and dissolved radionuclides in the uranium-238 and thorium-232 decay series.

Arizona;New Mexico

Techniques for computing discharge at four Navigation Dams on the Illinois and Des Plaines Rivers in Illinois

Techniques for computing discharge are developed for Brandon Road Dam on the Des Plaines River and for Dresden Island, Marseilles, and Starved Rock Dams on the Illinois River. At Brandon Road Dam, streamflow is regulated by the operation of Tainter gates and headgates. At Dresden Island, Marseilles, and Starved Rock Dams, only Tainter gates are operated to regulate streamflow. The locks at all dams are equipped with culvert valves that are used to fill and empty the lock. The techniques facilitate determination of discharge at locations along the upper Illinois Waterway where no streamflow-gaging stations exist. The techniques are also useful for computing low flows when the water-surface slope between control structures on the river approaches zero and traditional methods of determining discharge based on slope are unsatisfactory. Two techniques can be used to compute discharge at the dams--gate ratings and tailwater ratings . A gate ratingdescribes the relation between discharge, gate opening, tailwater stage, and headwater stage. A tailwater rating describes the relation between tailwater stage and discharge. Gate ratings for Tainter gates at Dresden Island, Marseilles, and Starved Rock Dams are based on a total of 78 measurements of discharge that range from 569 to 86,400 cubic feet per second. Flood hydrographs developed from the gate ratings and Lockmaster records of gate opening and stage compare closely with streamflow records published for nearby streamflow-gaging stations. Additional measurements are needed to verify gate ratings for Tainter gates and headgates at Brandon Road Dam after the dam rehabilitation is completed. Extensive leakage past deteriorated headgates and sluice gates contributed to uncertainty in the ratings developed for this dam. A useful tailwater rating is developed for Marseilles Dam. Tailwater ratings for Dresden Island Dam and Starved Rock Dam are of limited use because of varying downstream channel-storage conditions. A tailwater rating could not be developed for Brandon Road Dam because its tailwater pool is substantially affected by the headwater pool of Dresden Island Dam.

Water-Resources Investigations Report

Low-flow sediment transport in the Colorado River

In support of beach-stability research, bedload and suspended sediment were measured during a steady flow of 5,880 ft 3 /s and receding flows from 12,100 to 5,660 ft 3 /s in the Colorado River above National Canyon, near Supai, Arizona, October 7-12, 1989. During steady flows, 75 percent of the mean total-sediment discharge of 128 t/d was in suspension and about half the total-sediement load was finer than 0.062 mm. Median grain sizes of bedload and bed material were 0.43 and 0.40 mm, respecively. Although steady-flow bedload transport varied from the mean by about 45 percent, suspended-sediment discharge remained constant within sampling error. Helley-Smith and BL-86-3 bedload samplers were not significantly different. At larger transport rates, however, the rates measured by the Helley-Smith exceeded those measure by the BL-86-3. Transport rates from bedload samples collected with Helley-Smith and BL-86-3 bedload samplers in sections 8 ft apart demonstrate no consistent autocorrelation or cross correlation. Cross-sectional bedload-transport rates measured concurrently or consecutively with the bedload samplers showed good agreement indicating that bedload varied by at least a factor of 2.4 during the steady-flow period. Ninety-five percent of the bedload transport during low flow occurred in the center one-third of the channel.

Arizona

RUNOFF, SEDIMENT TRANSPORT, AND SURFACE COLLAPSE AT A LOW-LEVEL RADIOACTIVE-WASTE BURIAL SITE NEAR SHEFFIELD, ILLINOIS.

Runoff, sediment transport, and precipitation were measured in three gaged basins composing two-thirds of the 20-acre site, and in a 3. 5-acre basin located 0. 3 mile south of the site. Locations and dimensions of surface collapses at the site were recorded by the site contractor. Volumes of collapsed material were calculated and converted to an equivalent weight of earth material by applying a mean value for the bulk density of soils at the site.

Conference Paper