Geology topics

John B. Storm

Publications and source records attributed to John B. Storm.

6 recordsLinked to original sources

USGS2019

Flood-inundation maps for the Amite and Comite Rivers from State Highway 64 to U.S. Highway 190 at Central, Louisiana

Flood-inundation maps for a 14.5-mile reach of the Amite River and a 20.2-mile reach of the Comite River from State Highway 64 to U.S. Highway 190 were created by the U.S. Geological Survey (USGS) in cooperation with the City of Central, Louisiana. These maps, which can be accessed through an interactive mapper at the USGS Flood Inundation Mapping Program website and from a companion USGS data release, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages Amite River at Magnolia, La., (07377300) and Comite River near Comite, La. (07378000). Flood profiles were computed for the Amite and Comite River reaches by using the two-dimensional (2D), finite-volume numerical modeling options in the U.S. Army Corps of Engineers Hydrologic Engineering Center’s River Analysis System (USACE HEC-RAS) software version 5.0.3. Models were calibrated to the current (2018) stage-discharge relations at the Amite River at Magnolia, La., and Comite River near Comite, La., streamgages, water-surface profiles from the March and August 2016 floods, and documented high-water marks from the flood of August 2016. The hydraulic models were used to compute 37 individual water-surface profiles (21 for the Amite River and 16 for the Comite River) at 1.0-foot intervals ranging from the National Weather Service flood stage to the highest peak on record at the two streamgages. The 37 simulated water-surface profiles were used with a light detection and ranging-derived digital elevation model to delineate the flood extent and associated depth at each water level. The delineated areas (inundation maps) were merged into 127 combinations or possible flooding scenarios based on annual peak stage information from the two streamgaging stations. The availability of these maps, along with real-time data delivered via the internet, will provide emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for recovery efforts after floods.

Louisiana↗

USGS2017

Characterization of peak streamflows and flood inundation of selected areas in Louisiana from the August 2016 flood

Heavy rainfall occurred across Louisiana and southwestern Mississippi in August 2016 as a result of a slow-moving area of low pressure and a high amount of atmospheric moisture. The storm caused major flooding in the southern portions of Louisiana including areas surrounding Baton Rouge and Lafayette. Flooding occurred along the rivers such as the Amite, Comite, Tangipahoa, Tickfaw, Vermilion, and Mermentau Rivers. Over 31 inches of rain was reported in the city of Watson, 20 miles northeast of Baton Rouge, La., over the duration of the event. Streamflow-gaging stations operated by the U.S. Geological Survey (USGS) recorded peak streamflows of record at 10 locations, and 7 other locations experienced peak streamflows ranking in the top five for the duration of the period of record. In August 2016, USGS hydrographers made 50 discharge measurements at 21 locations on streams in Louisiana. Many of those discharge measurements were made for the purpose of verifying the accuracy of stage-streamflow relations at gaging stations operated by the USGS. Following the storm event, USGS hydrographers recovered and documented 590 high-water marks, noting location and height of the water above land surface. Many of these high-water marks were used to create 12 flood-inundation maps for selected communities of Louisiana that experienced flooding in August 2016. Digital datasets of the inundation area, modeling boundary, water depth rasters, and final map products are available online.

Louisiana↗

USGS2016

Characterization of peak streamflows and flood inundation of selected areas in Louisiana, Texas, Arkansas, and Mississippi from flood of March 2016

Heavy rainfall occurred across Louisiana, Texas, Arkansas, and Mississippi in March 2016 as a result of a slow-moving southward dip in the jetstream, funneling tropical moisture into parts of the Gulf Coast States and the Mississippi River Valley. The storm caused major flooding in the northwestern and southeastern parts of Louisiana and in eastern Texas. Flooding also occurred in the Mississippi River Valley in Arkansas and Mississippi. Over 26 inches of rain were reported near Monroe, Louisiana, over the duration of the storm. In March 2016, U.S. Geological Survey (USGS) hydrographers made more than 500 streamflow measurements in Louisiana, Texas, Arkansas, and Mississippi. Many of those streamflow measurements were made to verify the accuracy of stage-streamflow relations at gaging stations operated by the USGS. Peak streamflows were the highest on record at 14 locations, and streamflows at 29 locations ranked in the top five for the period of record at USGS streamflow-gaging stations analyzed for this report. Following the storm, USGS hydrographers documented 451 high-water marks in Louisiana and on the western side of the Sabine River in Texas. Many of these high-water marks were used to create 19 flood-inundation maps for selected areas of Louisiana and Texas that experienced flooding in March 2016.

Arkansas, Louisiana, Mississippi, Texas↗

USGS2014

An expanded model: flood-inundation maps for the Leaf River at Hattiesburg, Mississippi, 2013

Digital flood-inundation maps for a 6.8-mile reach of the Leaf River at Hattiesburg, Mississippi (Miss.), were created by the U.S. Geological Survey (USGS) in cooperation with the City of Hattiesburg, City of Petal, Forrest County, Mississippi Emergency Management Agency, Mississippi Department of Homeland Security, and the Emergency Management District. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage at Leaf River at Hattiesburg, Miss. (station no. 02473000). Current conditions for estimating near-real-time areas of inundation by use of USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/ . In addition, the information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system ( http://water.weather.gov/ahps/ ). The NWS forecasts flood hydrographs at many places that are often colocated with USGS streamgages. NWS-forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated by using the most current stage-discharge relations at the Leaf River at Hattiesburg, Miss. streamgage (02473000) and documented high-water marks from recent and historical floods. The hydraulic model was then used to determine 13 water-surface profiles for flood stages at 1.0-foot intervals referenced to the streamgage datum and ranging from bankfull to approximately the highest recorded water level at the streamgage. The simulated water-surface profiles were then combined with a geographic information system (GIS) digital elevation model (DEM, derived from light detection and ranging (lidar) data having a 0.6-foot vertical and 9.84-foot horizontal resolution) in order to delineate the area flooded at each water level. Development of the estimated flood inundation maps as described in this report update previously published inundation estimates by including reaches of the Bouie and Leaf Rivers above their confluence. The availability of these maps along with Internet information regarding current stage from USGS streamgages and forecasted stream stages from the NWS provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures as well as for post flood recovery efforts.

Mississippi↗

USGS2012

Flood-inundation maps for the Leaf River at Hattiesburg, Mississippi

Digital flood-inundation maps for a 1.7-mile reach of the Leaf River were developed by the U.S. Geological Survey (USGS) in cooperation with the City of Hattiesburg, City of Petal, Forrest County, Mississippi Emergency Management Agency, Mississippi Department of Homeland Security, and the Emergency Management District. The Leaf River study reach extends from just upstream of the U.S. Highway 11 crossing to just downstream of East Hardy/South Main Street and separates the cities of Hattiesburg and Petal, Mississippi. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent of flooding corresponding to selected water-surface elevations (stages) at the USGS streamgage at Leaf River at Hattiesburg, Mississippi (02473000). Current conditions at the USGS streamgage may be obtained through the National Water Information System Web site at http://waterdata.usgs.gov/ms/nwis/uv/?site_no=02473000&PARAmeter_cd=00065,00060 . In addition, the information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood-warning system ( http://water.weather.gov/ahps/ ). The NWS forecasts flood hydrographs at many places that are often collocated at USGS streamgages. The forecasted peak-stage information, available on the AHPS Web site, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the most current stage-discharge relations at the Leaf River at Hattiesburg, Mississippi, streamgage and documented high-water marks from recent and historical floods. The hydraulic model was then used to determine 13 water-surface profiles for flood stages at 1.0-foot intervals referenced to the streamgage datum and ranging from bankfull to approximately the highest recorded water-surface elevation at the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model [derived from Light Detection and Ranging (LiDAR) data having a 0.6-foot vertical accuracy and 9.84-foot horizontal resolution] in order to delineate the area flooded at each 1-foot increment of stream stage. The availability of these maps, when combined with real-time stage information from USGS streamgages and forecasted stream stage from the NWS, provides emergency management personnel and residents with critical information during flood-response activities, such as evacuations and road closures, as well as for post-flood recovery efforts.

Mississippi↗

USGS2009

Global Positioning System surveys of storm-surge sensors deployed during Hurricane Ike, Seadrift, Texas, to Lake Charles, Louisiana, 2008

The U.S. Geological Survey installed a network of pressure sensors at 65 sites along the Gulf Coast from Seadrift, Texas, northeast to Lake Charles, Louisiana, to record the timing, areal extent, and magnitude of inland storm surge and coastal flooding caused by Hurricane Ike in September 2008. A Global Positioning System was used to obtain elevations of reference marks near each sensor. A combination of real-time kinematic (RTK) and static Global Positioning System surveys were done to obtain elevations of reference marks. Leveling relative to reference marks was done to obtain elevations of sensor orifices above the reference marks. This report summarizes the Global Positioning System data collected and processed to obtain reference mark and storm-sensor-orifice elevations for 59 storm-surge sensors recovered from the original 65 installed as a necessary prelude to computation of storm-surge elevations. National Geodetic Survey benchmarks were used for RTK surveying. Where National Geodetic Survey benchmarks were not within 12 kilometers of a sensor site, static surveying was done. Additional control points for static surveying were in the form of newly established benchmarks or reestablished existing benchmarks. RTK surveying was used to obtain positions and elevations of reference marks for 29 sensor sites. Static surveying was used to obtain positions and elevations of reference marks for 34 sensor sites; four sites were surveyed using both methods. Multiple quality checks on the RTK-survey and static-survey data were applied. The results of all quality checks indicate that the desired elevation accuracy for the surveys of this report, less than 0.1-meter error, was achieved.

Louisiana, Texas↗