Geology topics

Jeremie Lasue

Publications and source records attributed to Jeremie Lasue.

10 recordsLinked to original sources

USGS2022

Bedrock geochemistry and alteration history of the clay-bearing Glen Torridon region of Gale crater, Mars

Glen Torridon is a topographic trough located on the slope of Aeolis Mons, Gale crater, Mars. It corresponds to what was previously referred to as the “clay-bearing unit”, due to the relatively strong spectral signatures of clay minerals (mainly ferric smectites) detected from orbit. Starting in January 2019, the Curiosity rover explored Glen Torridon for more than 700 sols (Martian days). The objectives of this campaign included acquiring a detailed understanding of the geologic context in which the clay minerals were formed and determining the intensity of aqueous alteration experienced by the sediments. Here, we present the major-element geochemistry of the bedrock as analyzed by the ChemCam instrument. Our results reveal that the two main types of bedrock exposures identified in the lower part of Glen Torridon are associated with distinct chemical compositions (K-rich and Mg-rich), for which we are able to propose mineralogical interpretations. Moreover, the topmost stratigraphic member exposed in the region displays a stronger diagenetic overprint, especially at two locations close to the unconformable contact with the overlying Stimson formation, where the bedrock composition significantly deviates from the rest of Glen Torridon. Overall, the values of the Chemical Index of Alteration determined with ChemCam are elevated by Martian standards, suggesting the formation of clay minerals through open system weathering. However, there is no indication that the alteration was stronger than in some terrains previously visited by Curiosity , which in turn implies that the enhanced orbital signatures are mostly controlled by non-compositional factors.

Journal of Geophysical Research E: Planets↗

USGS2022

Post-landing major element quantification using SuperCam laser induced breakdown spectroscopy

The SuperCam instrument on the Perseverance Mars 2020 rover uses a pulsed 1064 nm laser to ablate targets at a distance and conduct laser induced breakdown spectroscopy (LIBS) by analyzing the light from the resulting plasma. SuperCam LIBS spectra are preprocessed to remove ambient light, noise, and the continuum signal present in LIBS observations. Prior to quantification, spectra are masked to remove noisier spectrometer regions and spectra are normalized to minimize signal fluctuations and effects of target distance. In some cases, the spectra are also standardized or binned prior to quantification. To determine quantitative elemental compositions of diverse geologic materials at Jezero crater, Mars, we use a suite of 1198 laboratory spectra of 334 well-characterized reference samples. The samples were selected to span a wide range of compositions and include typical silicate rocks, pure minerals (e.g., silicates, sulfates, carbonates, oxides), more unusual compositions (e.g., Mn ore and sodalite), and replicates of the sintered SuperCam calibration targets (SCCTs) onboard the rover. For each major element (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O), the database was subdivided into five “folds” with similar distributions of the element of interest. One fold was held out as an independent test set, and the remaining four folds were used to optimize multivariate regression models relating the spectrum to the composition. We considered a variety of models, and selected several for further investigation for each element, based primarily on the root mean squared error of prediction (RMSEP) on the test set, when analyzed at 3 m. In cases with several models of comparable performance at 3 m, we incorporated the SCCT performance at different distances to choose the preferred model. Shortly after landing on Mars and collecting initial spectra of geologic targets, we selected one model per element. Subsequently, with additional data from geologic targets, some models were revised to ensure results that are more consistent with geochemical constraints. The calibration discussed here is a snapshot of an ongoing effort to deliver the most accurate chemical compositions with SuperCam LIBS.

Spectrochimica Acta B↗

USGS2021

Clustering supported classification of ChemCam data from Gale crater, Mars

The Chemistry and Camera (ChemCam) instrument on board the MSL rover Curiosity has collected a very large and unique dataset of in-situ spectra and images of Mars since landing in August 2012. More than 800,000 single shot LIBS (laser-induced breakdown spectroscopy) spectra measured on more than 2,500 individual targets were returned so far by ChemCam. Such a dataset is ideally suited for the application of statistical methods for the recognition of patterns that are difficult to observe by humans. In this work, we develop an approach relying on the feature extraction method non-negative matrix factorization (NMF) and the repetition of k-means clustering to classify ChemCam spectra. A strong consistency of the clustering results among the repetitions were found, which allowed us to identify six clusters representing the dominant compositions measured by ChemCam in Gale crater so far. By tracking clusters across the rover traverse from landing to sol 2756, we are able to provide a chemostratigraphic overview of Gale crater from the ChemCam perspective. Transitions between major geologic groups (such as the Bradbury and the Mt. Sharp groups) are identifiable demonstrating that they are compositionally distinct, consistent with previous work. Compositional differences between their members also appear in the results. Furthermore, a first approach in which a random forest classifier was trained and validated with the obtained cluster assignments, reveals promising results for predicting cluster memberships of new ChemCam LIBS data acquired after sol 2756.

Earth and Space Science↗

USGS2017

Geologic overview of the Mars Science Laboratory rover mission at the Kimberley, Gale crater, Mars

The Mars Science Laboratory (MSL) Curiosity rover completed a detailed investigation at the Kimberley waypoint within Gale crater from sols 571-634 using its full science instrument payload. From orbital images examined early in the Curiosity mission, the Kimberley region had been identified as a high-priority science target based on its clear stratigraphic relationships in a layered sedimentary sequence that had been exposed by differential erosion. Observations of the stratigraphic sequence at the Kimberley made by Curiosity are consistent with deposition in a prograding, fluvio-deltaic system during the late Noachian to early Hesperian, prior to the existence of most of Mt. Sharp. Geochemical and mineralogic analyses suggest that sediment deposition likely took place under cold conditions with relatively low water-to-rock ratios. Based on elevated K2O abundances throughout the Kimberley formation, an alkali feldspar protolith is likely one of several igneous sources from which the sediments were derived. After deposition, the rocks underwent multiple episodes of diagenetic alteration with different aqueous chemistries and redox conditions, as evidenced by the presence of Ca-sulfate veins, Mn-oxide fracture-fills, and erosion-resistant nodules. More recently, the Kimberley has been subject to significant aeolian abrasion and removal of sediments to create modern topography that slopes away from Mt. Sharp, a process that has continued to the present day.

Journal of Geophysical Research E: Planets↗

USGS2017

Chemistry of diagenetic features analyzed by ChemCam at Pahrump Hills, Gale crater, Mars

The Curiosity rover's campaign at Pahrump Hills provides the first analyses of lower Mount Sharp strata. Here we report ChemCam elemental composition of a diverse assemblage of post-depositional features embedded in, or cross-cutting, the host rock. ChemCam results demonstrate their compositional diversity, especially compared to the surrounding host rock: (i) Dendritic aggregates and relief enhanced features, characterized by a magnesium enhancement and sulfur detection, and interpreted as Mg-sulfates; (ii) A localized observation that displays iron enrichment associated with sulfur, interpreted as Fe-sulfate; (iii) Dark raised ridges with varying Mg- and Ca-enriched compositions compared to host rock; (iv) Several dark-toned veins with calcium enhancement associated with fluorine detection, interpreted as fluorite veins. (v) Light-toned veins with enhanced calcium associated with sulfur detection, and interpreted as Ca-sulfates. The diversity of the Pahrump Hills diagenetic assemblage suggests a complex post-depositional history for fine-grained sediments for which the origin has been interpreted as fluvial and lacustrine. Assessment of the spatial and relative temporal distribution of these features shows that the Mg-sulfate features are predominant in the lower part of the section, suggesting local modification of the sediments by early diagenetic fluids. In contrast, light-toned Ca-sulfate veins occur in the whole section and cross-cut all other features. A relatively late stage shift in geochemical conditions could explain this observation. The Pahrump Hills diagenetic features have no equivalent compared to targets analyzed in other locations at Gale crater. Only the light-toned Ca-sulfate veins are present elsewhere, along Curiosity's path, suggesting they formed through a common late-stage process that occurred at over a broad area.

Icarus↗

USGS2017

Recalibration of the Mars Science Laboratory ChemCam instrument with an expanded geochemical database

The ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) instrument onboard the Mars Science Laboratory (MSL) rover Curiosity has obtained > 300,000 spectra of rock and soil analysis targets since landing at Gale Crater in 2012, and the spectra represent perhaps the largest publicly-available LIBS datasets. The compositions of the major elements, reported as oxides (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O), have been re-calibrated using a laboratory LIBS instrument, Mars-like atmospheric conditions, and a much larger set of standards (408) that span a wider compositional range than previously employed. The new calibration uses a combination of partial least squares (PLS1) and Independent Component Analysis (ICA) algorithms, together with a calibration transfer matrix to minimize differences between the conditions under which the standards were analyzed in the laboratory and the conditions on Mars. While the previous model provided good results in the compositional range near the average Mars surface composition, the new model fits the extreme compositions far better. Examples are given for plagioclase feldspars, where silicon was significantly over-estimated by the previous model, and for calcium-sulfate veins, where silicon compositions near zero were inaccurate. The uncertainties of major element abundances are described as a function of the abundances, and are overall significantly lower than the previous model, enabling important new geochemical interpretations of the data.

Spectrochimica Acta Part B: Atomic Spectroscopy↗

USGS2016

The potassic sedimentary rocks in Gale Crater, Mars, as seen by ChemCam Onboard Curiosity

The Mars Science Laboratory rover Curiosity encountered potassium-rich clastic sedimentary rocks at two sites in Gale Crater, the waypoints Cooperstown and Kimberley. These rocks include several distinct meters thick sedimentary outcrops ranging from fine sandstone to conglomerate, interpreted to record an ancient fluvial or fluvio-deltaic depositional system. From ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) chemical analyses, this suite of sedimentary rocks has an overall mean K 2 O abundance that is more than 5 times higher than that of the average Martian crust. The combined analysis of ChemCam data with stratigraphic and geographic locations reveals that the mean K 2 O abundance increases upward through the stratigraphic section. Chemical analyses across each unit can be represented as mixtures of several distinct chemical components, i.e., mineral phases, including K-bearing minerals, mafic silicates, Fe-oxides, and Fe-hydroxide/oxyhydroxides. Possible K-bearing minerals include alkali feldspar (including anorthoclase and sanidine) and K-bearing phyllosilicate such as illite. Mixtures of different source rocks, including a potassium-rich rock located on the rim and walls of Gale Crater, are the likely origin of observed chemical variations within each unit. Physical sorting may have also played a role in the enrichment in K in the Kimberley formation. The occurrence of these potassic sedimentary rocks provides additional evidence for the chemical diversity of the crust exposed at Gale Crater.

Journal of Geophysical Research↗

USGS2016

ChemCam activities and discoveries during the nominal mission of the Mars Science Laboratory in Gale crater, Mars

At Gale crater, Mars, ChemCam acquired its first laser-induced breakdown spectroscopy (LIBS) target on Sol 13 of the landed portion of the mission (a Sol is a Mars day). Up to Sol 800, more than 188 000 LIBS spectra were acquired on more than 5800 points distributed over about 650 individual targets. We present a comprehensive review of ChemCam scientific accomplishments during that period, together with a focus on the lessons learned from the first use of LIBS in space. For data processing, we describe new tools that had to be developed to account for the uniqueness of Mars data. With regard to chemistry, we present a summary of the composition range measured on Mars for major-element oxides (SiO 2 , TiO 2 , Al 2 O 3 , FeO T , MgO, CaO, Na 2 O, K 2 O) based on various multivariate models, with associated precisions. ChemCam also observed H, and the non-metallic elements C, O, P, and S, which are usually difficult to quantify with LIBS. F and Cl are observed through their molecular lines. We discuss the most relevant LIBS lines for detection of minor and trace elements (Li, Rb, Sr, Ba, Cr, Mn, Ni, and Zn). These results were obtained thanks to comprehensive ground reference datasets, which are set to mimic the expected mineralogy and chemistry on Mars. With regard to the first use of LIBS in space, we analyze and quantify, often for the first time, each of the advantages of using stand-off LIBS in space: no sample preparation, analysis within its petrological context, dust removal, sub-millimeter scale investigation, multi-point analysis, the ability to carry out statistical surveys and whole-rock analyses, and rapid data acquisition. We conclude with a discussion of ChemCam performance to survey the geochemistry of Mars, and its valuable support of decisions about selecting where and whether to make observations with more time and resource-intensive tools in the rover's instrument suite. In the end, we present a bird's-eye view of the many scientific results: discovery of felsic Noachian crust, first observation of hydrated soil, discovery of manganese-rich coatings and fracture fills indicating strong oxidation potential in Mars' early atmosphere, characterization of soils by grain size, and wide scale mapping of sedimentary strata, conglomerates, and diagenetic materials.

Journal of Analytical Atomic Spectrometry↗

USGS2015

Chemical variations in Yellowknife Bay formation sedimentary rocks analyzed by ChemCam on board the Curiosity rover on Mars

The Yellowknife Bay formation represents a ~5 m thick stratigraphic section of lithified fluvial and lacustrine sediments analyzed by the Curiosity rover in Gale crater, Mars. Previous works have mainly focused on the mudstones that were drilled by the rover at two locations. The present study focuses on the sedimentary rocks stratigraphically above the mudstones by studying their chemical variations in parallel with rock textures. Results show that differences in composition correlate with textures and both manifest subtle but significant variations through the stratigraphic column. Though the chemistry of the sediments does not vary much in the lower part of the stratigraphy, the variations in alkali elements indicate variations in the source material and/or physical sorting, as shown by the identification of alkali feldspars. The sandstones contain similar relative proportions of hydrogen to the mudstones below, suggesting the presence of hydrous minerals that may have contributed to their cementation. Slight variations in magnesium correlate with changes in textures suggesting that diagenesis through cementation and dissolution modified the initial rock composition and texture simultaneously. The upper part of the stratigraphy (~1 m thick) displays rocks with different compositions suggesting a strong change in the depositional system. The presence of float rocks with similar compositions found along the rover traverse suggests that some of these outcrops extend further away in the nearby hummocky plains.

Journal of Geophysical Research E: Planets↗

USGS2014

Trace element geochemistry (Li, Ba, Sr, and Rb) using Curiosity's ChemCam: early results for Gale crater from Bradbury Landing Site to Rocknest

The ChemCam instrument package on the Mars rover, Curiosity, provides new capabilities to probe the abundances of certain trace elements in the rocks and soils on Mars using the laser-induced breakdown spectroscopy technique. We focus on detecting and quantifying Li, Ba, Rb, and Sr in targets analyzed during the first 100 sols, from Bradbury Landing Site to Rocknest. Univariate peak area models and multivariate partial least squares models are presented. Li, detected for the first time directly on Mars, is generally low (<15 ppm). The lack of soil enrichment in Li, which is highly fluid mobile, is consistent with limited influx of subsurface waters contributing to the upper soils. Localized enrichments of up to ~60 ppm Li have been observed in several rocks but the host mineral for Li is unclear. Bathurst_Inlet is a fine-grained bedrock unit in which several analysis locations show a decrease in Li and other alkalis with depth, which may imply that the unit has undergone low-level aqueous alteration that has preferentially drawn the alkalis to the surface. Ba (~1000 ppm) was detected in a buried pebble in the Akaitcho sand ripple and it appears to correlate with Si, Al, Na, and K, indicating a possible feldspathic composition. Rb and Sr are in the conglomerate Link at abundances >100 ppm and >1000 ppm, respectively. These analysis locations tend to have high Si and alkali abundances, consistent with a feldspar composition. Together, these trace element observations provide possible evidence of magma differentiation and aqueous alteration.

Journal of Geophysical Research E: Planets↗