Geology Reports⌕ Search

Geology topics

Jenna L. Shelton

Publications and source records attributed to Jenna L. Shelton.

At least 19 recordsLinked to original sources
USGS2026

The Great Lakes Geologic Mapping Coalition—Working collaboratively to understand the geology of the Great Lakes Region

Introduction The Great Lakes Geologic Mapping Coalition (GLGMC), commonly referred to as the “Coalition,” is a partnership between the U.S. Geological Survey (USGS), the U.S. States of Illinois, Indiana, Michigan, Minnesota, New York, Ohio, Pennsylvania, and Wisconsin and the Canadian province of Ontario. The member States receive funding for geologic mapping work from the USGS National Cooperative Geologic Mapping Program (NCGMP), whereas Ontario participates as a nonfunded partner. The mission of the GLGMC is to produce three-dimensional (3D) geologic maps that depict unconsolidated sediments and near-surface bedrock in the Great Lakes region of North America. Geologic maps are the basis of most earth science investigations and help support resource exploration (energy, minerals, groundwater), natural hazard mitigation, infrastructure development, and land-use planning, all of which can be used to advance economic development and strengthen national security in the Great Lakes region. During the last few million years, the Great Lakes region has experienced repeated glacial advances and retreats, leaving behind extensive sediments, abundant natural resources, and widespread effects on the underlying bedrock geology (Swezey and others, 2022). Linked by shared histories of past glaciations, industrial agriculture, and legacy automotive, coal, steel, and manufacturing industries, the GLGMC member States collaborate to improve the understanding of the 3D distribution of the sediments overlying the region’s bedrock (fig. 1). Developing a comprehensive subsurface 3D framework of this glaciated terrain can provide earth science data to policymakers at all levels. These insights facilitate informed decisions on the exploration, use, and protection of vital resources, such as critical minerals, industrial materials, and aquifers, thereby supporting economic prosperity and the well-being of the citizens of this region. Since its inception in 1998, the Coalition has completed more than 100 geologic mapping projects across the Great Lakes region. Each project aims to deliver geologic maps, 3D datasets, and other information that improves understanding of the geology of the Great Lakes region, with an emphasis on economic and water resources. Key deliverables include 3D geologic maps and models typically portraying sediment thickness, often derived from top-of-bedrock and borehole data. These products are developed through a combination of fieldwork, subsurface modeling, and the collection and analysis of rock and sediment cores. To support Coalition goals, member States collaborate with scientists working on related STATEMAP, EDMAP, and FEDMAP projects. Coalition scientists also engage with Tribal Nations in the Great Lakes region to ensure that Tribal interests pertaining to Coalition work are addressed. Through this collaboration, the Coalition unites the efforts of State, Federal, and Tribal Nation stakeholders to advance geologic data production and enhance understanding of the geologic resources of the Great Lakes region.

Illinois, Indiana, Michigan, Minnesota, New York, ↗
USGS2026

Per- and polyfluoroalkyl substances in waters associated with oil and gas development in the Denver Basin

Use of per- and polyfluoroalkyl substances (PFAS) in the petroleum industry could be a cause for concern due to the large volumes of produced water (PW) generated during oil and gas extraction, the reuse of these wastes in water-stressed regions, and adverse health outcomes related to PFAS exposures. However, PW PFAS characterization is nearly absent in the literature, and hydraulic fracturing (HF) chemical disclosures often omit the identities of additives as proprietary. Here we evaluate PFAS in PW samples from three petroleum wells in the Denver Basin during their first year of production. Total concentrations of targeted PFAS (Σ 40 PFAS) were < 35 ng/L in PW samples, with short-chain PFAS like perfluorobutanoic acid persisting throughout the sampled duration. Analysis of freshwater inputs for hydraulic fracturing (Σ 40 PFAS ~ 113 ng/L) and mixed fracture fluid (Σ 40 PFAS ~ 69 ng/L) indicated much of the targeted PFAS content was derived from the input water, and not from HF additives, however samples subjected to oxidation indicated the presence of PFAS precursors that would not be detected by targeted analysis. This study highlights that while PFAS content is low in the studied PWs, the potential for redistribution of PFAS in the environment may be a consideration for reuse applications.

Colorado, Nebraska, Wyoming↗
USGS2024

Produced water geochemistry from hydraulically stimulated Niobrara Formation petroleum wells: Origin of salinity and temporal perspectives on treatment and reuse

Produced water (i.e., a mixture of returned injection fluids and geologic formation brines) represents the largest volumetric waste stream associated with petroleum production in the United States. As such, produced water has been the focus of intense study with emphasis on understanding the geologic origin of the fluids, environmental impacts of unintended or intentional release, disposal concerns, and their commodity (e.g., lithium) potential. However, produced water geochemistry from many active petroleum plays remain poorly constrained leading to knowledge gaps associated with the origin of brine salinity and parameters (e.g., radium levels) that can impact treatment, disposal, and possible reuse. Here we evaluate the major ion geochemistry, radium concentrations, and stable water isotope composition of ~120 produced water samples collected from 17 producing unconventional petroleum wells in Weld County, Colorado from the Late Cretaceous Niobrara Formation. This sample set encompasses eight produced water time series from four new wells across production days 0 to ~365 and from four established wells across production days ~1000 to ~1700. Additionally, produced water from nine other established Niobrara Formation wells were sampled at discrete time points ranging from day 458 to day 2256, as well as hydraulic fracturing input fluids. These results expand the available Niobrara Formation produced water geochemical data, previously limited to few wells sampled within the first year of production, allowing for the heterogeneity of major ions and radium to be evaluated. Furthermore, we explore the geochemical relationships between major ion ratios and stable water isotope composition to understand the origin of salinity in Niobrara Formation brines from the Denver-Julesburg Basin. These findings are discussed with perspective toward potential treatment and reuse of Niobrara produced water prior to disposal.

Colorado, Nebraska, Wyoming↗
USGS2023

The EDMAP Program: Training the next generation of geologic mappers

Introduction Detailed geologic maps are the basis of most earth science investigations and can be used for natural hazard mitigation, resource identification and exploration, infrastructure planning, and more. As a part of the U.S. Geological Survey (USGS) congressionally mandated National Cooperative Geologic Mapping Program (NCGMP), the EDMAP program (referred to as EDMAP) is a partnership between the USGS and participating colleges and universities that provides mentorship and training opportunities for earth science students nationwide. EDMAP supports graduate students and upper-level undergraduate students—under the guidance of a faculty member who serves as a “principal investigator”—for the training of students to become geologic mappers. Between 1996 and 2021, EDMAP funded geologic mapping educational experiences and training for 1,373 students at more than 170 universities.

Fact Sheet↗
USGS2023

Evaluation of portable Raman spectroscopic analysis for source-rock thermal maturity assessments on bulk crushed rock

This study presents a simplified method and empirical relationships for determining organic matter thermal maturity using a portable Raman system equipped with a 785 nm laser, for analysis of crushed, whole-rock samples. Suites of rocks represented by shale and coal samples with various mineralogical composition, thermal maturity, and total organic carbon (TOC) were used to test the method and build correlations between Raman band separation (RBS) values and traditional thermal maturity indicators, organic matter reflectance (Ro), and programmed temperature pyrolysis (Tmax) values. A set of disparate shale samples, where both vitrinite and solid bitumen reflectance values were reported, have Ro values that range from 0.40 to 4.62%. Above 3.35% Ro, the corresponding RBS values plateau at ∼290 cm−1, thus correlations were evaluated with a linear regression (R2 = 0.96) between 0.40 and 3.35% Ro. Shale samples with Ro < 2% and Tmax < 551 were also used to correlate Tmax and RBS, yielding a linear correlation with an R2 of 0.94. For the coal data set, Ro values range from 1.21 to 4.08% and correlated RBS values plateau at ∼250 cm−1 above Ro = 3.0%, suggesting its correlative application below this maturity level. Several sample preparation methods were tested on cuttings material and standard deviation values for RBS were minimized by washing, drying, and hand crushing the material to pass through a 40-mesh sieve, although less preparation can still yield reliable results. The high degrees of correlation between whole-rock RBS data and two thermal maturity indicators demonstrate the utility of this approach for generating source rock thermal maturity data from minimally processed, whole-rock samples which could easily be applied in field or laboratory settings.

International Journal of Coal Geology↗
USGS2022

The National Cooperative Geologic Mapping Program’s U.S. GeoFramework Initiative — Delivering a digital database of geologic map information by 2030

The U.S. Geological Survey's National Cooperative Geologic Mapping Program's U.S. GeoFramework Initiative responds to Congressional direction to implement the National Geologic Map Database Phase Three. The U.S. GeoFramework Initiative aims to create and deliver a new digital geologic framework of the United States by 2030. This Fact Sheet outlines the collaborations needed and plans taken to achieve that goal.

Fact Sheet↗
USGS2022

In situ enhancement and isotopic labeling of biogenic coalbed methane

Subsurface microbial (biogenic) methane production is an important part of the global carbon cycle that has resulted in natural gas accumulations in many coal beds worldwide. Laboratory studies suggest that complex carbon-containing nutrients (e.g., yeast or algae extract) can stimulate methane production, yet the effectiveness of these nutrients within coal beds is unknown. Here, we use downhole monitoring methods in combination with deuterated water (D 2 O) and a 200-liter injection of 0.1% yeast extract (YE) to stimulate and isotopically label newly generated methane. A total dissolved gas pressure sensor enabled real-time gas measurements (641 days preinjection and for 478 days postinjection). Downhole samples, collected with subsurface environmental samplers, indicate that methane increased 132% above preinjection levels based on isotopic labeling from D 2 O, 108% based on pressure readings, and 183% based on methane measurements 266 days postinjection. Demonstrating that YE enhances biogenic coalbed methane production in situ using multiple novel measurement methods has immediate implications for other field-scale biogenic methane investigations, including in situ methods to detect and track microbial activities related to the methanogenic turnover of recalcitrant carbon in the subsurface.

Montana↗
USGS2022

National assessment of carbon dioxide enhanced oil recovery and associated carbon dioxide retention resources — Results

In 2020, the U.S. Geological Survey (USGS) completed a probabilistic assessment of the volume of technically recoverable oil resources available if current carbon dioxide enhanced oil recovery (CO 2 -EOR) technologies were applied to amenable oil reservoirs underlying the onshore and State waters areas of the conterminous United States. The assessment also includes estimates of the mass of CO 2 that could be stored (retained) as a result of CO 2 -EOR activities. The USGS assessment team evaluated more than 3,500 oil reservoirs that were miscible to injected CO 2 . The assessed reservoirs are in 185 previously defined USGS plays in 33 petroleum provinces of 7 national regions. The assessment team estimated that the technically recoverable oil associated with CO 2 -EOR ranges from approximately 25,000 million barrels (MMbbl) at the P 5 percentile to as much as 32,000 MMbbl at the P 95 percentile, with a mean of 29,000 MMbbl. The associated CO 2 retention ranges from approximately 7,400 million metric tons (Mt) at the P 5 percentile to as much as 9,500 Mt at the P 95 percentile, with a mean of 8,400 Mt. The West Texas and Eastern New Mexico region and the Gulf Coast region together contain 60 percent of the mean assessed CO 2 -EOR oil potential and 61 percent of the mean assessed CO 2 retention. Other regions with significant resource potential include the Midcontinent region and Rocky Mountains and Northern Great Plains region.

Continental United States↗
USGS2022

National assessment of carbon dioxide enhanced oil recovery and associated carbon dioxide retention resources — Summary

Introduction In 2020, the U.S. Geological Survey (USGS) completed a probabilistic assessment of the volume of technically recoverable oil resources that might be produced by using current carbon dioxide enhanced oil recovery (CO 2 -EOR) technologies in amenable conventional oil reservoirs underlying the onshore and State waters areas of the conterminous United States. The assessment also includes estimates of the mass of CO 2 that could be stored (retained) in the assessed oil reservoirs following the application of the CO 2 -EOR process. The USGS assessment team evaluated more than 3,500 oil reservoirs that were miscible to injected CO 2 . The assessed reservoirs are in 185 previously defined USGS plays in 33 petroleum provinces of 7 national regions. The team estimated that the total technically recoverable oil resulting from the application of the CO 2 -EOR process ranges from approximately 25,000 million barrels (MMbbl) at the P 5 percentile to as much as 32,000 MMbbl at the P 95 percentile, with a mean of 29,000 MMbbl. The associated CO 2 retention ranges from approximately 7,400 million metric tons (Mt) at the P 5 percentile to as much as 9,500 Mt at the P 95 percentile, with a mean of 8,400 Mt. The results are summarized in this fact sheet and are provided in more detail in the companion data release and circular. The West Texas and Eastern New Mexico region (primarily its Permian Basin) and the Gulf Coast region together contain 60 percent of the mean assessed CO 2 -EOR oil potential and 61 percent of the mean assessed CO 2 retention. Other regions with significant resource potential include the Midcontinent region and the Rocky Mountains and Northern Great Plains region.

Continental United States↗
USGS2022

Dissolved organic matter within oil and gas associated wastewaters from U.S. unconventional petroleum plays: Comparisons and consequences for disposal and reuse

Wastewater generated during petroleum extraction (produced water) may contain high concentrations of dissolved organics due to their intimate association with organic-rich source rocks, expelled petroleum, and organic additives to fluids used for hydraulic fracturing of unconventional (e.g., shale) reservoirs. Dissolved organic matter (DOM) within produced water represents a challenge for treatment prior to beneficial reuse. High salinities characteristic of produced water, often 10× greater than seawater, coupled to the complex DOM ensemble create analytical obstacles with typical methods. Excitation-emission matrix spectroscopy (EEMS) can rapidly characterize the fluorescent component of DOM with little impact from matrix effects. We applied EEMS to evaluate DOM composition in 18 produced water samples from six North American unconventional petroleum plays. Represented reservoirs include the Eagle Ford Shale (Gulf Coast Basin), Wolfcamp/Cline Shales (Permian Basin), Marcellus Shale and Utica/Point Pleasant (Appalachian Basin), Niobrara Chalk (Denver-Julesburg Basin), and the Bakken Formation (Williston Basin). Results indicate that the relative chromophoric DOM composition in unconventional produced water may distinguish different lithologies, thermal maturity of resource types (e.g., heavy oil vs. dry gas), and fracturing fluid compositions, but is generally insensitive to salinity and DOM concentration. These results are discussed with perspective toward DOM influence on geochemical processes and the potential for targeted organic compound treatment for the reuse of produced water.

Colorado, Montana, Nebraska, New York, North Dakot↗
USGS2022

Assessment of carbon dioxide enhanced oil recovery and associated carbon dioxide retention resources of the United States

In 2020, the U.S. Geological Survey (USGS) completed a probabilistic assessment of the volume of technically recoverable oil resources that could be produced using current carbon dioxide enhanced oil recovery (CO2-EOR) technologies in amenable conventional oil reservoirs underlying onshore and State-owned offshore waters (herein after, onshore and State waters areas) of the conterminous United States. Our assessment also includes estimates of the mass of CO2 that could be stored (retained) in the assessed oil reservoirs following the application of the CO2-EOR process. The USGS assessment team evaluated more than 3,500 oil reservoirs that were amenable to miscible CO2 injection. The assessed reservoirs are located in 185 plays previously defined by a USGS National Oil and Gas Assessment in 33 petroleum provinces of seven national regions. The team estimated that the total technically recoverable oil resulting from the application of the CO2-EOR process ranges from approximately 25,000 million barrels (MMbbl) at the P5 probability percentile to as much as 32,000 MMbbl at the P95 probability percentile, with a mean of 29,000 MMbbl. The associated CO2 retention ranges from approximately 7,400 million metric tons (Mt) at the P5 percentile to as much as 9,500 Mt at the P95 percentile, with a mean of 8,400 Mt.

conterminous United States↗
USGS2021

Machine learning can assign geologic basin to produced water samples using major ion geochemistry

Understanding the geochemistry of waters produced during petroleum extraction is essential to informing the best treatment and reuse options, which can potentially be optimized for a given geologic basin. Here, we used the US Geological Survey’s National Produced Waters Geochemical Database (PWGD) to determine if major ion chemistry could be used to classify accurately a produced water sample to a given geologic basin based on similarities to a given training dataset. Two datasets were derived from the PWGD: one with seven features but more samples (PWGD7), and another with nine features but fewer samples (PWGD9). The seven-feature dataset, prior to randomly generating a training and testing (i.e., validation) dataset, had 58,541 samples, 20 basins, and was classified based on total dissolved solids (TDS), bicarbonate (HCO 3 ), Ca, Na, Cl, Mg, and sulfate (SO 4 ). The nine-feature dataset, prior to randomly splitting into a training and testing (i.e., validation) dataset, contained 33,271 samples, 19 basins, and was classified based on TDS, HCO 3 , Ca, Na, Cl, Mg, SO 4 , pH, and specific gravity. Three supervised machine learning algorithms—Random Forest, k-Nearest Neighbors, and Naïve Bayes—were used to develop multi-class classification models to predict a basin of origin for produced waters using major ion chemistry. After training, the models were tested on three different datasets: Validation7, Validation9, and one based on data absent from the PWGD. Prediction accuracies across the models ranged from 23.5 to 73.5% when tested on the two PWGD-based datasets. A model using the Random Forest algorithm predicted most accurately compared to all other models tested. The models generally predicted basin of origin more accurately on the PWGD7-based dataset than on the PWGD9-based dataset. An additional dataset, which contained data not in the PWGD, was used to test the most accurate model; results suggest that some basins may lack geochemical diversity or may not be well described, while others may be geochemically diverse or are well described. A compelling result of this work is that a produced water basin of origin can be determined using major ions alone and, therefore, deep basinal fluid compositions may not be as variable within a given basin as previously thought. Applications include predicting the geochemistry of produced fluid prior to drilling at different intervals and assigning historical produced water data to a producing basin.

Natural Resources Research↗
USGS2020

Utica shale play oil and gas brines: Geochemistry and factors influencing wastewater management

The Utica and Marcellus Shale Plays in the Appalachian Basin are the fourth and first largest natural gas producing plays in the United States, respectively. Hydrocarbon production generates large volumes of brine (“produced water”) that must be disposed of, treated, or reused. Though Marcellus brines have been studied extensively, there are few studies from the Utica Shale Play. This study presents new brine chemical analyses from 16 Utica Shale Play wells in Ohio and Pennsylvania. Results from Na–Cl–Br systematics and stable and radiogenic isotopes suggest that the Utica Shale Play brines are likely residual pore water concentrated beyond halite saturation during the formation of the Ordovician Beekmantown evaporative sequence. The narrow range of chemistry for the Utica Shale Play produced waters (e.g., total dissolved solids = 214–283 g/L) over both time and space implies a consistent composition for disposal and reuse planning. The amount of salt produced annually from the Utica Shale Play is equivalent to 3.4% of the annual U.S. halite production. Utica Shale Play brines have radium activities 580 times the EPA maximum contaminant level and are supersaturated with respect to barite, indicating the potential for surface and aqueous radium hazards if not properly disposed of.

Kentucky, Maryland, New York, Ohio, Pennsylvania, ↗
USGS2020

Repetitive sampling and control threshold improve 16S rRNA results from produced waters associated with hydraulically fractured shales

Sequencing microbial DNA from deep subsurface environments is complicated by a number of issues ranging from contamination to non-reproducible results. Many samples obtained from these environments - which are of great interest due to the potential to stimulate microbial methane generation - contain low biomass. Therefore, samples from these environments are difficult to study as sequencing results can be easily impacted by contamination. In this case, the low amount of sample biomass may be effectively swamped by the contaminating DNA and generate misleading results. Additionally, performing field work in these environments can be difficult, as researchers generally have limited access to and time on site. Therefore, optimizing a sampling plan to produce the best results while collecting the greatest number of samples over a short period of time is ideal. This study aimed to recommend an adequate sampling plan for field researchers obtaining microbial biomass for 16S rRNA gene sequencing, applicable specifically to oil and gas-producing environments. Forty-nine different samples were collected by filtering specific volumes of produced water from a hydraulically fractured well producing from the Niobrara Shale. Water was collected in two different sampling events 24 hours apart. Four to five samples were collected from 11 specific volumes. These samples along with eight different blanks were submitted for analysis. DNA was extracted from each sample, and quantitative polymerase chain reaction (qPCR) and 16S rRNA Illumina MiSeq gene sequencing were performed to determine relative concentrations of biomass and microbial community composition, respectively. The qPCR results varied across sampled volumes, while no discernible trend correlated contamination to volume of water filtered. This suggests that collecting a larger volume of sample may not result in larger biomass concentrations or better representation of a sampled environment. Researchers could prioritize collecting many low volume samples over few high-volume samples. Our results suggest that there also may be variability in the concentration of microbial communities present in produced waters over short (i.e., hours) time scales, which warrants further investigation. Submission of multiple blanks is also vital to determining how contamination or low biomass effects may influence a sample set collected from an unknown environment.

Montana, Wyoming, Colorado, New Mexico, Texas, Okl↗
USGS2020

Compositional analysis of formation water geochemistry and microbiology of commercial and carbon dioxide-rich wells in the southwestern United States

Studies of naturally occurring subsurface carbon dioxide (CO 2 ) accumulations can provide useful information for potential CO 2 injection projects; however, the microbial communities and formation water geochemistry of most reservoirs are understudied. Formation water and microbial biomass were sampled at four CO 2 -rich reservoir sites: two within Bravo Dome, a commercial CO 2 field in New Mexico; one northwest of Bravo Dome in Colorado (Oakdale Field); and one southwest of Bravo Dome in New Mexico (Rafter “K” Ranch). Aside from the Rafter “K” Ranch site, minor differences were observed in the geochemistry of formation water collected from these sites compared to historical data. No organisms were significantly associated with Oakdale Field compared to the other three sites, nor were any hydrogeochemical or gas geochemical parameters (for example, CO 2 concentration) found to have significant associations with the microbial ecology of these four sites. Microorganisms from these sites were metabolically diverse and had the potential to (1) generate methane, (2) produce corrosive hydrogen sulfide (H 2 S), and (3) rapidly biofoul and (or) clog pore spaces by shifting microbial communities with changes in salinity or nutrient supply. This study demonstrates that high concentrations of CO 2 in subsurface reservoirs apparently have not imparted a distinct geochemical or microbiological signature on the associated formation waters and that the microorganisms in these reservoirs are metabolically diverse and could adapt to geochemical changes in the subsurface.

Colorado, New Mexico, Texas, Oklahoma↗
USGS2019

A probabilistic assessment methodology for carbon dioxide enhanced oil recovery and associated carbon dioxide retention

The U.S. Energy Independence and Security Act of 2007 authorized the U.S. Geological Survey (USGS) to conduct a national assessment of the potential volume of hydrocarbons recoverable by injection of carbon dioxide (CO 2 ) into known oil reservoirs with historical production. The implementation of CO 2 enhanced oil recovery (CO 2 -EOR) techniques could increase the U.S. recoverable hydrocarbon resource base. Use of anthropogenic CO 2 in the CO 2 -EOR process could reduce the amount of CO 2 released to the atmosphere by allowing a percentage of the injected CO 2 to remain in reservoir pore space once occupied by produced oil and water or by CO 2 dissolution in oil and water in the reservoir. The USGS has developed a new methodology for the national assessment of technically recoverable oil resources that may be produced by using current CO 2 -EOR technologies. The methodology relies on a proprietary reservoir-level database, the comprehensive resource database (CRD). The CRD incorporates commercially available geologic and engineering data, and USGS-defined play averages or province averages of reservoir data were used to populate incomplete records. Values from the CRD are used to estimate the original oil in place ( OOIP ) for each reservoir. The inputs are reviewed by USGS geologists, particularly when play or province averages have been used. Monte Carlo simulation is used to produce a numerical probability distribution for the OOIP for each reservoir, with the mean defined as the value of the OOIP in the CRD. A reservoir model (CO 2 Prophet, developed for the U.S. Department of Energy by Texaco, Inc.) is used to determine the incremental recovery factors for oil during the CO 2 -EOR process, on an individual reservoir basis. The model is also used to estimate the volume of CO 2 remaining in the reservoir after the CO 2 -EOR process is complete. Empirical decline curve analysis and comparison with data from published papers and reports on CO 2 -EOR projects are utilized to substantiate the simulation results. Numerical distributions of recovery factors are prepared for variations in the reservoir lithology (clastic or carbonate). The distribution of incremental oil is computed by multiplying the appropriate probability distribution of recovery factors by the individual reservoir distribution of the OOIP . A way to estimate the CO 2 remaining in the reservoir after the completion of the CO 2 -EOR process is also included in the methodology. Assessment results will be aggregated to play, petroleum province, regional, and national scales. This assessment methodology has been tested on the Horseshoe Atoll, Upper Pennsylvanian-Wolfcampian play in the Permian Basin Province in Texas; the play consists of 27 reservoirs having at least 2 billion barrels of OOIP that are amenable to the CO 2 -EOR process. The play was selected as a test case because CO 2 -EOR production data and published reports are available for several reservoirs within the play. Preliminary estimates of oil recoverable by implementation of miscible CO 2 -EOR are comparable to those reported in the literature and obtained by reservoir decline curve analysis.

Scientific Investigations Report↗
USGS2019

Carbon dioxide enhanced oil recovery and residual oil zone studies at the U.S. Geological Survey

The U.S. Geological Survey (USGS) is preparing a national resource assessment of the potential hydrocarbons recoverable after injection of carbon dioxide (CO2) into conventional oil reservoirs in the United States. The implementation of CO2-enhanced oil recovery (CO2-EOR) techniques can increase hydrocarbon production, and lead to incidental retention of CO2 in reservoir pore space allowing long-term storage of anthropogenic CO2. A Comprehensive Resource Database (CRD) containing proprietary data on location, geologic, petrophysical, and reservoir parameters, plus production and well counts for major oil and gas reservoirs in onshore areas and State waters of the conterminous United States and Alaska, was developed to support the USGS assessment. Residual oil zones (ROZs) also can provide potential pore space for long-term storage of anthropogenic CO2. However, ROZs are not included in the upcoming USGS national CO2-EOR assessment because assessment methods for ROZs still are being developed. Additional ROZ CO2-EOR and CO2 retention data and reservoir simulations are needed to calibrate national ROZ assessment estimates.

Conference Paper↗