Geology topics

Jeffrey W. Beeson

Publications and source records attributed to Jeffrey W. Beeson.

4 recordsLinked to original sources

USGS2020

Controls on sediment distribution in the coastal zone of the central California transform continental margin, USA

We use >10,000 km of high-resolution seismic-reflection data together with multibeam bathymetry to document complex and highly variable post-Last Glacial Maximum (LGM) sediment distribution and thickness in the coastal zone (~10 m isobath to 5.6 km offshore) along a ~800 km section of central California's transform continental margin. Sediment thickness ranges from 0 (seafloor bedrock) to 64 m with a mean of 8.7 m. We delineate 25 coastal zone “sediment domains,” and group them based on common geomorphology and sediment occurrence. Thickest sediment occurs in “mountain front” and “large river” domains, which comprise 14.5% and 7.9% of the coastal zone and contain 30.1% and 18.2% of coastal zone sediment, respectively. In contrast, “small river” domains and “sediment-poor shelf” domains comprise 50.7% and 15.7% of the coastal zone and contain 18.4% and 12.7% of its sediment. The distribution and thickness of post-LGM sediment in the coastal zone is controlled by a combination of tectonics, sediment supply, and eustasy. Sediment is derived from a tectonically controlled coastal landscape of rapidly uplifting mountain fronts, more slowly uplifting marine terraces, and fault-bounded headlands and alluvial-estuarine troughs. Sediment supply is maximized along steep, landslide-prone, mountain fronts and at the mouths of large watersheds, and minimized along lower-relief, terraced coastal landscape drained by smaller rivers and creeks. In the offshore coastal zone, tectonics generates local uplifts and basins, and influences shelf width and gradient as well as the locations of some shelf-incised submarine canyons. Sea-level rise raises base level, drowns estuaries, creates accommodation space on the shelf (amount based on gradient), and isolates the heads of many submarine canyons at or near the shelfbreak. Comparison of shelf sediment volumes with estimates of “unaltered” watershed sediment supply reveals that a relatively small proportion of post-LGM sediment supply is preserved on the shelf offshore of some of the largest rivers. Sediments deposited in shoreline and shelf environments have limited preservation potential, and the most complete long-term geologic record of the post-LGM transgression and highstand is likely represented in slope and submarine fan deposits.

California↗

USGS2019

Offshore shallow structure and sediment distribution, Punta Gorda to Point Arena, Northern California

This publication consists of two map sheets that display shallow geologic structure, along with sediment distribution and thickness, for an approximately 150-km-long offshore section of the northern California coast between Punta Gorda and Point Arena. Each map sheet includes three maps at scales of either 1:100,000 or 1:200,000, and together the sheets include 30 figures that contain representative high-resolution seismic-reflection profiles. The maps and seismic-reflection surveys cover most of the continental shelf in this region. In addition, the maps show the locations of the shelf break and the 3-nautical-mile limit of California’s State Waters. The seismic-reflection data, which are the primary dataset used to develop the maps, were collected to support the California Seafloor Mapping Program, U.S. Geological Survey Offshore Geologic Hazards projects, and National Oceanic and Atmospheric Administration’s (NOAA’s) Ocean Explorer program. In addition to the two map sheets, this publication includes geographic information system data files of faults, sediment thicknesses, and depths-to-base of sediment The map area includes the northernmost section of the right-lateral San Andreas Fault, which extends offshore from Point Arena in the south to Point Delgada in the north. The San Andreas Fault is the primary structure in the widely distributed plate boundary between the Pacific Plate and the Sierra Nevada–Great Valley Microplate, with estimates of cumulative right slip of as much as up to 450 km. South of Point Delgada, fault-related transtension has resulted in development of the Noyo Basin. North of Point Delgada, the San Andreas Fault transitions into a complex contractional zone in and (or) south of the King Range, including a possible nearshore fault that may connect with the Mattole Canyon Fault. Quaternary sediments and bedrock underlie the shelf. On the seismic-reflection profiles, we digitally traced the thickness and depth of the uppermost seismic-stratigraphic unit, which is a focus of this publication. The upper contact of this unit is the seafloor; the lower contact is a transgressive surface of erosion, a commonly angular, wave-cut unconformity characterized by an upward change to lower amplitude, more diffuse reflections. On the basis of this lower contact, this stratigraphic unit is inferred to have been deposited on the shelf in the last about 21,000 years during the sea-level rise that followed the last major lowstand and the Last Glacial Maximum (LGM). Maps in this publication show both the thickness of this upper sediment unit and the depth to the base of the sediment unit. Within the map region, five different “domains” of post-LGM shelf sediment are delineated on the basis of sediment thickness and coastal geomorphology. Maximum sediment thickness (as much as 67 m) is found in the northern part of the region, along the steep south flank of the King Range. Minimum sediment thickness (areas of exposed bedrock) is found on fault-bounded uplifts, which include Tolo bank and Punta Gorda bank. Mean sediment thickness for the entire shelf in the map area between Punta Gorda and Point Arena is 8.9 m, and total sediment volume is 12,824×10 6 m 3 .

California↗

USGS2019

Offshore shallow structure and sediment distribution, Point Sur to Point Arguello, central California

This publication consists of three map sheets that display shallow geologic structure, along with sediment distribution and thickness, for an about 225-km-long offshore section of the central California coast between Point Sur and Point Arguello. Each map sheet includes three maps, at scales of either 1:150,000 or 1:200,000, as well as a set of figures that contain representative high-resolution seismic-reflection profiles. The maps and seismic-reflection surveys cover most of the continental shelf in this region. In addition, the maps show the locations of the shelf break and the 3-nautical-mile limit of California’s State Waters. The seismic-reflection data, which are the primary dataset used to develop the maps, were collected to support the California Seafloor Mapping Program and U.S. Geological Survey Offshore Geologic Hazards projects. In addition to the three map sheets, this publication includes geographic information system data files of interpreted faults, folds, sediment thicknesses, and depths-to-base of sediment. The faults and folds shown on the maps have been locally simplified as appropriate for the map scales. The right-lateral San Gregorio–Hosgri Fault (SGHF) is the most significant structure in the map area. On a regional scale, the SGHF is part of a 400-km-long, right-lateral fault system that extends northwestward from Point Arguello to the area offshore of San Francisco, where it merges with the San Andreas Fault. From north to south in this part of central California, the SGHF lies offshore between the south flank of Point Sur and the north flank of Point Piedras Blancas, then comes onshore at Point Piedras Blancas, before heading offshore again between the south flank of Point Piedras Blancas and Point Arguello. Cumulative fault offset along the SGHF is as much as 150 to 160 km, decreasing to the south by transferring slip on to northwest-striking faults that converge with the SGHF both onland and offshore from the east. In the map area, the offshore-converging faults include the Los Osos Fault, the Shoreline–Point Buchon Fault, the Casmalia Fault, and the Lions Head Fault. Quaternary sediments and bedrock underlie the shelf. On the seismic-reflection profiles, we divide Quaternary shelf sediments into two units. Characterizing the younger, upper unit is a focus of this publication. This unit is inferred to have been deposited on the shelf in the last about 21,000 years during the sea-level rise that followed the last major lowstand and the Last Glacial Maximum (LGM). This upper unit overlies a transgressive surface of erosion, a commonly angular, wave-cut unconformity, and is generally characterized by low-amplitude, continuous to moderately continuous, diffuse, subparallel, generally flat reflections. Maps in this publication show both the thickness of this upper sediment unit and the depth to the base of the sediment unit. Within the map region, 11 different “domains” of post-LGM shelf sediment are delineated on the basis of sediment thickness and coastal geomorphology. Maximum sediment thickness is in the southern part of the region, offshore of the mouths of the Santa Ynez and Santa Maria Rivers. Minimum sediment thickness is found offshore of prominent rocky points, including Point Buchon and Piedras Blancas. Mean sediment thickness for the entire shelf in the map area between Point Sur and Point Arguello is 12.2 m, and total sediment volume is 24.7 million cubic meters.

California↗

USGS2017

The transtensional offshore portion of the northern San Andreas fault: Fault zone geometry, late Pleistocene to Holocene sediment deposition, shallow deformation patterns, and asymmetric basin growth

We mapped an ~120 km offshore portion of the northern San Andreas fault (SAF) between Point Arena and Point Delgada using closely spaced seismic reflection profiles (1605 km), high-resolution multibeam bathymetry (~1600 km 2 ), and marine magnetic data. This new data set documents SAF location and continuity, associated tectonic geomorphology, shallow stratigraphy, and deformation. Variable deformation patterns in the generally narrow (∼1 km wide) fault zone are largely associated with fault trend and with transtensional and transpressional fault bends. We divide this unique transtensional portion of the offshore SAF into six sections along and adjacent to the SAF based on fault trend, deformation styles, seismic stratigraphy, and seafloor bathymetry. In the southern region of the study area, the SAF includes a 10-km-long zone characterized by two active parallel fault strands. Slip transfer and long-term straightening of the fault trace in this zone are likely leading to transfer of a slice of the Pacific plate to the North American plate. The SAF in the northern region of the survey area passes through two sharp fault bends (∼9°, right stepping, and ∼8°, left stepping), resulting in both an asymmetric lazy Z–shape sedimentary basin (Noyo basin) and an uplifted rocky shoal (Tolo Bank). Seismic stratigraphic sequences and unconformities within the Noyo basin correlate with the previous 4 major Quaternary sea-level lowstands and record basin tilting of ∼0.6°/100 k.y. Migration of the basin depocenter indicates a lateral slip rate on the SAF of 10–19 mm/yr for the past 350 k.y. Data collected west of the SAF on the south flank of Cape Mendocino are inconsistent with the presence of an offshore fault strand that connects the SAF with the Mendocino Triple Junction. Instead, we suggest that the SAF previously mapped onshore at Point Delgada continues onshore northward and transitions to the King Range thrust.

Geosphere↗