Geology topics

Jeffrey Lee

Publications and source records attributed to Jeffrey Lee.

3 recordsLinked to original sources

USGS2020

Plate boundary trench retreat and dextral shear drive intracontinental fault-slip histories: Neogene dextral faulting across the Gabbs Valley and Gillis Ranges, Central Walker Lane, Nevada

The spatial-temporal evolution of intracontinental faults and the forces that drive their style, orientation, and timing are central to understanding tectonic processes. Intracontinental NW-striking dextral faults in the Gabbs Valley–Gillis Ranges (hereafter referred to as the GVGR), Nevada, define a structural domain known as the eastern Central Walker Lane located east of the western margin of the North American plate. To consider how changes in boundary type along the western margin of the North American plate influenced both the initiation and continued dextral fault slip to the present day in the GVGR, we combine our new detailed geologic mapping, structural studies, and 40 Ar/ 39 Ar geochronology with published geologic maps to calculate early to middle Miocene dextral fault-slip rates. In the GVGR, Mesozoic basement is nonconformably overlain by a late Oligocene to Miocene sequence dominated by tuffs, lavas, and sedimentary rocks. These rocks are cut and offset by four primary NW-striking dextral faults, from east to west the Petrified Spring, Benton Spring, Gumdrop Hills, and Agai Pah Hills–Indian Head faults. A range of geologic markers, including tuff- and lava-filled paleovalleys, the southern extent of lava flows, and a normal fault, show average dextral offset magnitudes of 9.6 ± 1.1 km, 7.0 ± 1.7 km, 9.7 ± 1.0 km, and 4.9 ± 1.1 km across the four faults, respectively. Cumulative dextral offset across the GVGR is 31.2 ± 2.3 km. Initiation of slip along the Petrified Spring fault is tightly bracketed between 15.99 ± 0.05 Ma and 15.71 ± 0.03 Ma, whereas slip along the other faults initiated after 24.30 ± 0.05 Ma to 20.14 ± 0.26 Ma. Assuming that slip along all four faults initiated at the same time as the Petrified Spring fault yields calculated dextral fault-slip rates of 0.4 ± 0.1–0.6 ± 0.1 mm/yr, 0.4 ± 0.1–0.5 ± 0.1 mm/yr, 0.6 ± 0.1 mm/yr, and 0.3 ± 0.1 mm/yr on the four faults, respectively. Middle Miocene initiation of dextral fault slip across the GVGR overlaps with the onset of normal slip along range-bounding faults in the western Basin and Range to the north and the northern Eastern California shear zone to the south. Based on this spatial-temporal relationship, we propose that dextral fault slip across the GVGR defines a kinematic link or accommodation zone between the two regions of extension. At the time of initiation of dextral slip across the GVGR, the plate-boundary setting to the west was characterized by subduction of the Farallon plate beneath the North American plate. To account for the middle Miocene onset of extension across the Basin and Range and dextral slip in the GVGR, we hypothesize that middle Miocene trench retreat drove westward motion of the Sierra Nevada and behind it, crustal extension across the Basin and Range and NW-dextral shear within the GVGR. During the Pliocene, the plate boundary to the west changed to NW-dextral shear between the Pacific and North American plates, which drove continued dextral slip along the same faults within the GVGR because they were fortuitously aligned subparallel to plate boundary motion.

Nevada↗

USGS2019

Dextral, normal, and sinistral faulting across the eastern California shear zone-Mina deflection transition, California-Nevada

Strike-slip faults commonly include extensional and contractional bends and stepovers, whereas rotational stepovers are less common. The Volcanic Tableland, Black Mountain, and River Spring areas (California and Nevada, USA) (hereafter referred to as the VBR region) straddle the transition from the dominantly NW-striking dextral faults that define the northwestern part of the eastern California shear zone into a rotational stepover characterized by dominantly NE-striking sinistral faults that define the southwestern Mina deflection. New detailed geologic mapping, structural studies, and 40 Ar/ 39 Ar geochronology across the VBR region allow us to calculate Pliocene to Pleistocene fault slip rates and test predictions for the kinematics of fault slip transfer into this rotational stepover. In the VBR, Mesozoic basement is nonconformably overlain by a Miocene sequence of rhyolite, dacite, and andesite volcanic rocks that yield 40 Ar/ 39 Ar ages between 22.878 ± 0.051 Ma and 11.399 ± 0.041 Ma. Miocene rocks are unconformably overlain by an extensive sequence of Pliocene basalt and andesite lava flows and cinder cones that yield 40 Ar/ 39 Ar ages between 3.606 ± 0.060 Ma and 2.996 ± 0.027 Ma. The Pliocene sequence is, in turn, unconformably overlain by Quaternary tuffs and sedimentary rocks. This sequence of rocks is cut by NS- to NW-striking normal faults across the Volcanic Tableland that transition northward into NS-striking normal faults across the Black Mountain area and that, in turn, transition northward into NW-striking dextral and NE-striking sinistral faults in the River Spring area. A range of geologic markers were used to measure offset across the faults in the VBR, and combined with the age of the markers, yield minimum ∼EW-extension rates of ∼0.5 mm/yr across the Volcanic Tableland and Black Mountain regions, and minimum NW-dextral slip and NE-sinistral slip rates of ∼0.7 and ∼0.3 mm/yr, respectively, across the River Spring region. In the River Spring area, our preferred minimum dextral slip and sinistral slip rates are 0.8–0.9 mm/yr and 0.7–0.9 mm/yr, respectively. We propose three kinematic fault slip models, two irrotational and one rotational, whereby the VBR region transfers a portion of dextral Owens Valley fault slip northwestward into the Mina deflection. In irrotational model 1, Owens Valley fault slip is partitioned into two components, one northeastward onto the White Mountain fault zone and one northwestward into the Volcanic Tableland. Slip from the two zones is then transferred northward into the southwestern Mina deflection. In irrotational model 2, Owens Valley fault slip is partitioned into three components, with the third component partitioned west-northwest onto the Sierra Nevada frontal fault zone. In the rotational model, predicted sinistral slip rates across the southwestern Mina deflection are at least 115% greater than our observed minimum slip rates, implying our minimum observed rates underestimate true sinistral slip rates. A comparison of summed geologic fault slip rates, parallel to motion of the Sierra Nevada block relative to the central Great Basin, from the Sierra Nevada northeastward across the VBR region and into western Nevada are the same as geodetic rates, if our assumptions about the geologic slip rate across the dextral White Mountain fault zone is correct.

California, Nevada↗

USGS2014

Himalayan gneiss dome formation in the middle crust and exhumation by normal faulting: New geochronology of Gianbul dome, northwestern India

A general lack of consensus about the origin of Himalayan gneiss domes hinders accurate thermomechanical modeling of the orogen. To test whether doming resulted from tectonic contraction (e.g., thrust duplex formation, antiformal bending above a thrust ramp, etc.), channel flow, or via the buoyant rise of anatectic melts, this study investigates the depth and timing of doming processes for Gianbul dome in the western Himalaya. The dome is composed of Greater Himalayan Sequence migmatite, Paleozoic orthogneiss, and metasedimentary rock cut by multiple generations of leucogranite dikes. These rocks record a major penetrative D2 deformational event characterized by a domed foliation and associated NE-SW–trending stretching lineation, and they are flanked by the top-down-to-the-SW (normal-sense) Khanjar shear zone and the top-down-to-the-NE (normal sense) Zanskar shear zone (the western equivalent of the South Tibetan detachment system). Monazite U/Th-Pb geochronology records (1) Paleozoic emplacement of the Kade orthogneiss and associated granite dikes; (2) prograde Barrovian metamorphism from 37 to 33 Ma; (3) doming driven by upper-crustal extension and positive buoyancy of decompression melts between 26 and 22 Ma; and (4) the injection of anatectic melts into the upper levels of the dome—neutralizing the effects of melt buoyancy and potentially adding strength to the host rock—by ca. 22.6 Ma on the southwestern flank and ca. 21 Ma on the northeastern flank. As shown by a northeastward decrease in 40 Ar/ 39 Ar muscovite dates from 22.4 to 20.2 Ma, ductile normal-sense displacement within the Zanskar shear zone ended by ca. 22 Ma, after which the Gianbul dome was exhumed as part of a rigid footwall block below the brittle Zanskar normal fault, tilting an estimated 5°–10°SW into its present orientation.

Gianbul dome↗