Geology Reports⌕ Search

Geology topics

Jeffrey D. Phillips

Publications and source records attributed to Jeffrey D. Phillips.

At least 19 recordsLinked to original sources
USGS2019

Crustal architecture beneath the southern Midcontinent (USA) and controls on Mesoproterozoic iron-oxide mineralization from 3D geophysical models

Several types of critical mineral-bearing ore deposits in the southern Midcontinent region of the U.S. are hosted in Mesoproterozoic igneous rocks largely concealed beneath Paleozoic cover. Discerning the architecture of igneous intrusions and volcanic centers in the crust is fundamental to understanding the geologic evolution of this vast region and its mineral resources. To advance the understanding of the geologic framework beneath the Southeast Missouri Iron Metallogenic Province, we invert continental-scale magnetic and gravity anomaly data to three-dimensional (3D) physical property models. The regional models image altered and mineralized igneous rocks near the Precambrian basement surface and underlying intrusive complexes that extend down to the Moho. At shallow crustal levels, our models confirm that iron oxide-apatite ± rare earth element (IOA±REE) deposits and iron oxide-copper-gold ± cobalt (IOCG) deposits occur within or near the edges of large low density/low susceptibility early Mesoproterozoic (ca 1.4 Ga) silicic calderas and (ca 1.3 Ga) granitic plutons. Previous isotopic and geochemical studies conclude that the iron deposits and their volcanic host rocks originated from mantle-derived and crustal melts that erupted during regional extension. Extension was associated with thermal event(s) that produced the large-scale silicic magmatism related to the ca 1.45 Ga Eastern Granite Rhyolite Province (EGRP) and the 1.35 Ga Southern Granite Rhyolite Province (SGRP). We postulate that early in the evolution of the EGRP, several trans-crustal magmatic plumbing systems developed that are evident in the 3D models. The Southeast Missouri Metallogenic Province is underlain by one such magmatic system that is expressed as a northwest-trending ~ 50 km-wide by 200 km-long elongate track of high susceptibility at deep crustal levels. The high susceptibility corridor splays upward through the crust to the Precambrian surface where the iron deposits are the epigenetic manifestation of this magmatic event. Our findings confirm that the iron deposits, with no distinct connection at the surface, are connected to one large magmatic system at depth. We propose that other similar susceptibility tracks, which are present along the top of the mantle, mark additional feeder zones that allowed magma to ascend to the main eruptive centers that produced the Granite Rhyolite Provinces. The early Mesoproterozoic extensional tectonic framework established crustal-scale pathways that controlled the distribution of subsequent magmatic activity, including the ca 1.4 Ga calderas and underlying intrusions, ca 1.3 Ga silicic plutons and Phanerozoic alkaline intrusions. If these interpretations are correct, our study has identified large areas that are prospective for critical mineral-bearing ore deposits and, importantly, suggests that the Mesoproterozoic architecture may have influenced subsequent magmatism and hydrothermal activity in the southern Midcontinent of the U.S.

Ore Geology Reviews↗
USGS2018

PDEPTH—A computer program for the geophysical interpretation of magnetic and gravity profiles through Fourier filtering, source-depth analysis, and forward modeling

PDEPTH is an interactive, graphical computer program used to construct interpreted geological source models for observed potential-field geophysical profile data. The current version of PDEPTH has been adapted to the Windows platform from an earlier DOS-based version. The input total-field magnetic anomaly and vertical gravity anomaly profiles can be filtered to produce derivative products such as reduced-to-pole magnetic profiles, pseudogravity profiles, pseudomagnetic profiles, and upward-or-downward-continued profiles. A variety of source-location methods can be applied to the original and filtered profiles to estimate (and display on a cross section) the locations and physical properties of contacts, sheet edges, horizontal line sources, point sources, and interface surfaces. Two-and-a-half-dimensional source bodies having polygonal cross sections can be constructed using a mouse and keyboard. These bodies can then be adjusted until the calculated gravity and magnetic fields of the source bodies are close to the observed profiles. Auxiliary information such as the topographic surface, bathymetric surface, seismic basement, and geologic contact locations can be displayed on the cross section using optional input files. Test data files, used to demonstrate the source location methods in the report, and several utility programs are included.

Techniques and Methods↗
USGS2014

Crustal structure beneath the Paleozoic Parnaíba Basin revealed by airborne gravity and magnetic data, Brazil

The Parnaíba Basin is a large Paleozoic syneclise in northeastern Brazil underlain by Precambrian crystalline basement, which comprises a complex lithostructural and tectonic framework formed during the Neoproterozoic–Eopaleozoic Brasiliano–Pan African orogenic collage. A sag basin up to 3.5 km thick and 1000 km long formed after the collage. The lithologic composition, structure, and role in the basin evolution of the underlying basement are the focus of this study. Airborne gravity and magnetic data were modeled to reveal the general crustal structure underneath the Parnaíba Basin. Results indicate that gravity and magnetic signatures delineate the main boundaries and structural trends of three cratonic areas and surrounding Neoproterozoic fold belts in the basement. Triangular-shaped basement inliers are geophysically defined in the central region of this continental-scale Neoproterozoic convergence zone. A 3-D gravity inversion constrained by seismological data reveals that basement inliers exhibit a 36–40.5 km deep crustal root, with borders defined by a high-density and thinner crust. Forward modeling of gravity and magnetic data indicates that lateral boundaries between crustal units are limited by Brasiliano shear zones, representing lithospheric sutures of the Amazonian and São Francisco Cratons, Tocantins Province and Parnaíba Block. In addition, coincident residual gravity, residual magnetic, and pseudo-gravity lows indicate two complex systems of Eopaleozoic rifts related to the initial phase of the sag deposition, which follow basement trends in several directions.

Tectonophysics↗
USGS2014

Active tensor magnetic gradiometer system final report for Project MM–1514

An interactive computer simulation program, based on physical models of system sensors, platform geometry, Earth environment, and spheroidal magnetically-permeable targets, was developed to generate synthetic magnetic field data from a conceptual tensor magnetic gradiometer system equipped with an active primary field generator. The system sensors emulate the prototype tensor magnetic gradiometer system (TMGS) developed under a separate contract for unexploded ordnance (UXO) detection and classification. Time-series data from different simulation scenarios were analyzed to recover physical dimensions of the target source. Helbig-Euler simulations were run with rectangular and rod-like source bodies to determine whether such a system could separate the induced component of the magnetization from the remanent component for each target. This report concludes with an engineering assessment of a practical system design.

Open-File Report↗
USGS2014

A ground-based magnetic survey of Frenchman Flat, Nevada National Security Site and Nevada Test and Training Range, Nevada: data release and preliminary interpretation

The Nevada National Security Site (NNSS, formerly the Nevada Test Site) is located in southern Nevada approximately 105 kilometers (km) (65 miles) northwest of Las Vegas. Frenchman Flat is a sedimentary basin located on the eastern edge of NNSS and extending eastward into the adjacent Nevada Test and Training Range (NTTR). In late September 2010, the U.S. Geological Survey (USGS) conducted a ground-based magnetic survey of the northeast portion of Frenchman Flat within the NNSS and within the adjacent NTTR. The survey was designed to address two questions of importance to the siting of new monitoring wells near (down-gradient of) or within groundwater-contaminant plumes resulting from the Milk Shake and Pin Stripe underground nuclear tests: Question 1—What is the horizontal extent of the basalt flow (the Basalt lava flow aquifer or BLFA) encountered in three wells (UE5k, UE5i, and ER-5-3) within the alluvial section at depths ranging from 268 to 290 meters (m) (880 to 950 feet [ft]), and having a thickness between 9 and 21 m (30 and 70 ft)? Exploratory Hole UE5k is located near Emplacement Hole U5k, site of the Milk Shake underground nuclear test (U.S. Department of Energy, 2000). Characterization well ER-5-3 is located approximately 670 m (2,200 ft) west-northwest of the Milk Shake test. Question 2—Does basin and range normal faulting observed in the hills north of Frenchman Flat continue southward under alluvium and possibly disrupt the Topopah Spring Tuff of the Paintbrush Group (the Topopah Spring welded tuff aquifer or TSA) east of the Pin Stripe underground nuclear test, which was conducted in Emplacement hole U11b?

Nevada↗
USGS2014

Porphyry copper assessment of western Central Asia

The U.S. Geological Survey conducted an assessment of resources associated with porphyry copper deposits in the western Central Asia countries of Kyrgyzstan, Uzbekistan, Kazakhstan, and Tajikistan and the southern Urals of Kazakhstan and Russia as part of a global mineral resource assessment. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits; (2) compile a database of known porphyry copper deposits and significant prospects; (3) where data permit, estimate numbers of undiscovered deposits within those permissive tracts; and (4) provide probabilistic estimates the amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in those undiscovered deposits. Western Central Asia, a region diverse in its geologic complexity, is situated north of the Tarim and North China tectonic blocks and sandwiched between the East European and Siberian cratons. The Ural Mountains form the western margin of the region; the southern margin is formed by the high-standing ranges that make up the Tian Shan mountain range in the border regions of Kazakhstan, Kyrgyzstan, and western China, where the effects of collisional tectonics are well displayed. The tectonic collage that makes up the core of western Central Asia is perhaps the geologically least understood part of the region. There is broad agreement that the early Paleozoic is made up of tectonically juxtaposed blocks that vary from Precambrian-cored microcontinents to magmatic arc and related complexes to subduction-related accretionary complexes. The rudiments of an incipient, contiguous single Kazakhstan block were formed by the end of the Silurian. In the middle to late Paleozoic, the block was unconformably superposed by two large, nested magmatic-arc belts, one Devonian, the other Carboniferous. Both magmatic-arc complexes were folded into a horseshoe-shaped, southeast-opening orocline in response to the final collisions of the various surrounding cratonic blocks with the Kazakhstan block. Additional deformation in the upper Cenozoic derived from the collision of India and China significantly redistributed fragments of the various mosaicked blocks, particularly in the central and southern parts of the western Central Asian region. Porphyry copper deposits are associated with many of the magmatic-arc fragments and belts throughout the geologically complex region, and economically important deposits are found in arc sequences of all Paleozoic Periods. The economically most productive arcs are Carboniferous. The assessment includes a discussion of the tectonic and geologic setting of porphyry copper deposits in western Central Asia (chapter 1), an application of remote sensing data for hydrothermal alteration mapping as a tool for porphyry copper assessment in the region (chapter 2), and a probabilistic assessment of undiscovered porphyry copper resources in four areas that represent Ordovician and Late Paleozoic (Carboniferous-Permian) magmatic arcs (chapter 3). The principal litho-tectonic terrane concept used to delineate permissive tracts was that of a magmatic arc that formed in the subduction boundary zone above a subducting plate. Eight permissive tracts are delineated on the basis of mapped and inferred subsurface distributions of igneous rocks assigned to magmatic arcs of specified age ranges that define areas where the occurrence of porphyry copper deposits within 1 kilometer of the Earth’s surface is possible. These tracts range in area from about 8,000 to 200,000 square kilometers and host 18 known porphyry copper deposits that contain about 54 million metric tons of copper. Available data included geologic maps, the distribution of significant porphyry copper occurrences and potentially related deposit types, the distribution of hydrothermal alteration patterns that are consistent with porphyry copper mineralization, and information on possible subsurface extensions of permissive rocks. On the basis of analyses of these data, the assessment team estimated a mean of 25 undiscovered porphyry copper deposits for the study area. Estimates of numbers of undiscovered deposits were combined with grade and tonnage models in a Monte Carlo simulation to yield a mean estimate of 95 million metric tons of copper in undiscovered porphyry copper deposits; this represents about twice the amount of identified porphyry copper resources (54 million metric tons). Detailed descriptions of each permissive tract, including the rationales for delineation and assessment, are given in appendixes, along with a geographic information system (GIS) that includes permissive tract boundaries, point locations of known porphyry copper deposits and significant occurrences, and hydrothermal alteration data based on analysis of remote sensing data.

Ural Mountains↗
USGS2011

Assessment of undiscovered oil and gas resources of the Cook Inlet region, south-central Alaska, 2011

The U.S. Geological Survey (USGS) recently completed a new assessment of undiscovered, technically recoverable oil and gas resources in the Cook Inlet region of south-central Alaska. Using a geology-based assessment methodology, the USGS estimates that mean undiscovered volumes of nearly 600 million barrels of oil, about 19 trillion cubic feet of natural gas, and 46 million barrels of natural gas liquids remain to be found in this area.

Alaska↗
USGS2009

Geophysical Interpretations of the Southern Espanola Basin, New Mexico, That Contribute to Understanding Its Hydrogeologic Framework

The southern Espanola basin consists of a westward- and northward-thickening wedge of rift fill, composed primarily of Santa Fe Group sediments, that serves as an important aquifer for the city of Santa Fe and surrounding areas. Detailed aeromagnetic surveys were flown to better understand ground-water resources in this aquifer. This report presents a synthesis of these data with gravity data and other constraints. The interpretations were accomplished using qualitative interpretation, state-of-art data analysis techniques, and two- and three-dimensional modeling. The results depict the presence of and depth to many geologic features that have hydrogeologic significance, including shallow faults, different types of igneous units, and basement rocks. The results are presented as map interpretations, geophysical profile models, and a digital surface that represents the base and thickness of Santa Fe Group sediments, as well as vector files of some volcanic features and faults.

Professional Paper↗
USGS2007

Geosoft eXecutables (GX's) Developed by the U.S. Geological Survey, Version 2.0, with Notes on GX Development from Fortran Code

Introduction Geosoft executables (GX's) are custom software modules for use with the Geosoft Oasis montaj geophysical data processing system, which currently runs under the Microsoft Windows 2000 or XP operating systems. The U.S. Geological Survey (USGS) uses Oasis montaj primarily for the processing and display of airborne geophysical data. The ability to add custom software modules to the Oasis montaj system is a feature employed by the USGS in order to take advantage of the large number of geophysical algorithms developed by the USGS during the past half century. This main part of this report, along with Appendix 1, describes Version 2.0 GX's developed by the USGS or specifically for the USGS by contractors. These GX's perform both basic and advanced operations. Version 1.0 GX's developed by the USGS were described by Phillips and others (2003), and are included in Version 2.0. Appendix 1 contains the help files for the individual GX's. Appendix 2 describes the new method that was used to create the compiled GX files, starting from legacy Fortran source code. Although the new method shares many steps with the approach presented in the Geosoft GX Developer manual, it differs from that approach in that it uses free, open-source Fortran and C compilers and avoids all Fortran-to-C conversion.

Open-File Report↗
USGS2006

Preliminary integrated geologic map databases for the United States: Digital data for the generalized bedrock geologic map, Yukon Flats region, east-central Alaska

The growth in the use of Geographic Information Systems (GIS) has highlighted the need for digital geologic maps that have been attributed with information about age and lithology. Such maps can be conveniently used to generate derivative maps for manifold special purposes such as mineral-resource assessment, metallogenic studies, tectonic studies, and environmental research. This report is part of a series of integrated geologic map databases that cover the entire United States. Three national-scale geologic maps that portray most or all of the United States already exist; for the conterminous U.S., King and Beikman (1974a,b) compiled a map at a scale of 1:2,500,000, Beikman (1980) compiled a map for Alaska at 1:2,500,000 scale, and for the entire U.S., Reed and others (2005a,b) compiled a map at a scale of 1:5,000,000. A digital version of the King and Beikman map was published by Schruben and others (1994). Reed and Bush (2004) produced a digital version of the Reed and others (2005a) map for the conterminous U.S. The present series of maps is intended to provide the next step in increased detail. State geologic maps that range in scale from 1:100,000 to 1:1,000,000 are available for most of the country, and digital versions of these state maps are the basis of this product. The digital geologic maps presented here are in a standardized format as ARC/INFO export files and as ArcView shape files. Data tables that relate the map units to detailed lithologic and age information accompany these GIS files. The map is delivered as a set 1:250,000-scale quadrangle files. To the best of our ability, these quadrangle files are edge-matched with respect to geology. When the maps are merged, the combined attribute tables can be used directly with the merged maps to make derivative maps.

Alaska↗
USGS2004

Tertiary thrust systems and fluid flow beneath the Beaufort coastal plain (1002 area), Arctic National Wildlife Refuge, Alaska, U.S.A.

Beneath the Arctic coastal plain (commonly referred to as "the 1002 area") in the Arctic National Wildlife Refuge, northeastern Alaska, United States, seismic reflection data show that the northernmost and youngest part of the Brookian orogen is preserved as a Paleogene to Neogene system of blind and buried thrust-related structures. These structures involve Proterozoic to Miocene (and younger?) rocks that contain several potential petroleum reservoir facies. Thermal maturity data indicate that the deformed rocks are mature to overmature with respect to hydrocarbon generation. Oil seeps and stains in outcrops and shows in nearby wells indicate that oil has migrated through the region; geochemical studies have identified three potential petroleum systems. Hydrocarbons that were generated from Mesozoic source rocks in the deformed belt were apparently expelled and migrated northward in the Paleogene, before much of the deformation in this part of the orogen. It is also possible that Neogene petroleum, which was generated in Tertiary rocks offshore in the Arctic Ocean, migrated southward into Neogene structural traps at the thrust front. However, the hydrocarbon resource potential of this largely unexplored region of Alaska's North Slope remains poorly known. In the western part of the 1002 area, the dominant style of thin-skinned thrusting is that of a passive-roof duplex, bounded below by a detachment (floor thrust) near the base of Lower Cretaceous and younger foreland basin deposits and bounded above by a north-dipping roof thrust near the base of the Eocene. East-west-trending, basement-involved thrusts produced the Sadlerochit Mountains to the south, and buried, basement-involved thrusts are also present north of the Sadlerochit Mountains, where they appear to feed displacement into the thin-skinned system. Locally, late basement-involved thrusts postdate the thin-skinned thrusting. Both the basement-involved thrusts and the thin-skinned passive-roof duplex were principally active in the Miocene. In the eastern part of the 1002 area, a northward-younging pattern of thin-skinned deformation is apparent. Converging patterns of Paleocene reflectors on the north flank of the Sabbath syncline indicate that the Aichilik high and the Sabbath syncline formed as a passive-roof duplex and piggyback basin, respectively, just behind the Paleocene deformation front. During the Eocene and possibly the Oligocene, thin-skinned thrusting advanced northward over the present location of the Niguanak high. A passive-roof duplex occupied the frontal part of this system. The Kingak and Hue shales exposed above the Niguanak high were transported into their present structural position during the Eocene to Oligocene motion on the long thrust ramps above the present south flank of the Niguanak high. Broad, basement-cored subsurface domes (Niguanak high and Aurora dome) formed near the deformation front in the Oligocene, deforming the overlying thin-skinned structures and feeding a new increment of displacement into thin-skinned structures directly to the north. Deformation continued through the Miocene above a detachment in the basement. Offshore seismicity and Holocene shortening documented by previous workers may indicate that contractional deformation continues to the present day.

Alaska↗
USGS2004

Thickness of Santa Fe Group sediments in the Espanola Basin south of Santa Fe, New Mexico, as estimated from aeromagnetic data

In the southern Espa?ola basin south of Santa Fe, New Mexico, weakly magnetic Santa Fe Group sediments of Oligocene to Pleistocene age, which represent the primary aquifers for the region, are locally underlain by moderately to strongly magnetic igneous and volcaniclastic rocks of Oligocene age. Where this relationship exists, the thickness of Santa Fe Group sediments, and thus the maximum thickness of the aquifers, can be estimated from quantitative analysis of high-resolution aeromagnetic data. These thickness estimates provide guidance for characterizing the ground-water resources in between scattered water wells in this area of rapid urban development and declining water supplies. This report presents one such analysis based on the two-step extended Euler method for estimating depth to magnetic sources. The results show the general form of a north-trending synclinal basin located between the Cerrillos Hills and Eldorado with northward thickening of Santa Fe Group sediments. The increase in thickness is gradual from the erosional edge on the south to a U-shaped Santa Fe embayment hinge line, north of which sediments thicken much more dramatically. Along the north-south basin axis, Santa Fe Group sediments thicken from 300 feet (91 meters) at the hinge line near latitude 35o32'30'N to 2,000 feet (610 meters) at the Cerrillos Road interchange at Interstate 25, north of latitude 35o36'N. The depth analysis indicates that, superimposed on this general synclinal form, there are many local areas where the Santa Fe Group sediments may be thickened by a few hundred feet, presumably due to erosional relief on the underlying Oligocene volcanic and volcaniclastic rocks. Some larger areas of greater apparent thickening occur where the presence of magnetic rocks directly underlying the Santa Fe Group is uncertain. Where magnetic rocks are absent beneath the Santa Fe Group, the thickness cannot be estimated from the aeromagnetic data.

Open-File Report↗
USGS2002

Merged digital aeromagnetic data for the middle Rio Grande and southern Espanola basins, New Mexico

The U. S. Geological Survey (USGS) recently conducted a multi-disciplinary study of the Middle Rio Grande basin (Bartolino and Cole, 2002; Fig. 1). The main purpose of this study was to gain a better multi-dimensional understanding of the basin's hydrogeologic framework and use this new understanding to construct an improved regional ground-water flow model. The Middle Rio Grande basin fill serves as the primary water resource for Albuquerque and surrounding communities (Thorn and others, 1993). It is composed of poorly consolidated, Tertiary to Quaternary sediments, collectively called the Santa Fe Group. These sediments were deposited during the Tertiary to Quaternary development of the Rio Grande rift (Fig. 1, inset). The strata vary in thickness from 1,000 to more than 4,000 m and range from mudstone to conglomerate (Kelley, 1977; May and Russell, 1994).

New Mexico↗
USGS2002

Processing and interpretation of aeromagnetic data for the Santa Cruz Basin–Patagonia Mountains area, south-central Arizona

In 1997, the U.S. Geological Survey (USGS) contracted with Sial Geosciences Inc. for a detailed aeromagnetic survey of the Santa Cruz basin and Patagonia Mountains area of south-central Arizona. The contractor's Operational Report is included as an Appendix in this report. This section describes the data processing performed by the USGS on the digital aeromagnetic data received from the contractor. This processing was required in order to remove flight line noise, estimate the depths to the magnetic sources, and estimate the locations of the magnetic contacts. Three methods were used for estimating source depths and contact locations: the horizontal gradient method, the analytic signal method, and the local wavenumber method. The depth estimates resulting from each method are compared, and the contact locations are combined into an interpretative map showing the dip direction for some contacts.

Arizona↗