Geology topics

Jason K. Van Beek

Publications and source records attributed to Jason K. Van Beek.

6 recordsLinked to original sources

USGS2022

Orbital and in-situ investigation of periodic bedrock ridges in Glen Torridon, Gale Crater, Mars

Wind has been the dominant agent of landscape modification on Mars for the past ~3 billion years. Among the diversity of features formed by aeolian abrasion on the surface of Mars are periodic bedrock ridges (PBRs), a relatively recently recognized class of erosional bedforms on Mars for which Earth analogues are rare. Gale crater, the field site for NASA’s Mars Science Laboratory Curiosity rover since it landed there in 2012, contains a diverse and extensive record of aeolian deposition and erosion. This study focuses on a series of periodic, linear bedrock ridges that occur within the Fe/Mg-smectite clay-bearing Glen Torridon region of Aeolis Mons (informally Mount Sharp). During Curiosity’s exploration of the Glen Torridon region between sols ~2300-3080, the rover drove through this field of ridges, providing the first opportunity for the in situ observation of these enigmatic erosional features. This study characterizes the Glen Torridon ridges using orbiter and rover data to determine their morphology, spatial distribution, compositional and material properties, and association with other aeolian features in the area. Based on these observations, the Glen Torridon ridges are interpreted to be consistent with an origin as wind-eroded periodic bedrock ridges carved during the most recent exhumation of Mount Sharp into the present-day mound. Although there is evidence for multidirectional winds in the Glen Torridon region based on the orientation of modern ripples, megaripples, TARs and other bedrock indicators, the consistent orientation of the Glen Torridon ridges, coupled with morphologic asymmetries within the ridges, support formation and elongation of the Glen Torridon PBRs forms parallel to a net regional northerly wind direction in and around Gale crater.

Journal of Geophysical Research E: Planets↗

USGS2021

A rock record of complex aeolian bedforms in a Hesperian desert landscape: The Stimson formation as exposed in the Murray Buttes, Gale Crater, Mars

Lithified aeolian strata encode information about ancient planetary surface processes and the climate during deposition. Decoding these strata provides insight regarding past sediment transport processes, bedform kinematics, depositional landscape, and the prevailing climate. Deciphering these signatures requires a detailed analysis of sedimentary architecture to reconstruct dune morphology, motion, and the conditions that enabled their formation. Here, we show that a distinct sandstone unit exposed in the foothills of Mount Sharp, Gale crater, Mars, records the preserved expression of compound aeolian bedforms that accumulated in a large dune field. Analysis of Mastcam images of the Stimson formation shows that it consists of cross‐stratified sandstone beds separated by a hierarchy of erosive bounding surfaces formed during dune migration. The presence of two orders of surfaces with distinct geometrical relations reveals that the Stimson‐era landscape consisted of large dunes (draas) with smaller, superimposed dunes migrating across their lee slopes. Analysis of cross‐lamination and subset bounding surface geometries indicate a complex wind regime that transported sediment toward the north, constructing oblique dunes. This dune field was a direct product of the regional climate and the surface processes active in Gale crater during the fraction of the Hesperian Period recorded by the Stimson formation. The environment was arid, supporting a large aeolian dune field; this setting contrasts with earlier humid depositional episodes, recorded by the lacustrine sediments of the Murray formation (also Hesperian). Such fine‐scale reconstruction of landscapes on the ancient surface of Mars is important to understanding the planet’s past climate and habitability.

Journal of Geophysical Research - Planets↗

USGS2020

A lacustrine paleoenvironment recorded at Vera Rubin ridge, Gale crater: Overview of the sedimentology and stratigraphy observed by the Mars Science Laboratory Curiosity rover

For ~500 Martian solar days (sols), the Mars Science Laboratory team explored Vera Rubin ridge (VRR), a topographic feature on the northwest slope of Aeolis Mons. Here we review the sedimentary facies and stratigraphy observed during sols 1,800–2,300, covering more than 100 m of stratigraphic thickness. Curiosity's traverse includes two transects across the ridge, which enables investigation of lateral variability over a distance of ~300 m. Three informally named stratigraphic members of the Murray formation are described: Blunts Point, Pettegrove Point, and Jura, with the latter two exposed on VRR. The Blunts Point member, exposed just below the ridge, is characterized by a recessive, fine-grained facies that exhibits extensive planar lamination and is crosscut by abundant curvi-planar veins. The Pettegrove Point member is more resistant, fine-grained, thinly planar laminated, and contains a higher abundance of diagenetic concretions. Conformable above the Pettegrove Point member is the Jura member, which is also fine-grained and parallel stratified, but is marked by a distinct step in topography, which coincides with localized meter-scale inclined strata, a thinly and thickly laminated facies, and occasional crystal molds. All members record low-energy lacustrine deposition, consistent with prior observations of the Murray formation. Uncommon outcrops of low-angle stratification suggest possible subaqueous currents, and steeply inclined beds may be the result of slumping. Collectively, the rocks exposed at VRR provide additional evidence for a long-lived lacustrine environment (in excess of 10 6 years via comparison to terrestrial records of sedimentation), which extends our understanding of the duration of habitable conditions in Gale crater.

Journal of Geophysical Research: Planets↗

USGS2019

Evidence for plunging river plume deposits in the Pahrump Hills member of the Murray formation, Gale crater, Mars

Recent robotic missions to Mars have offered new insights into the extent, diversity and habitability of the Martian sedimentary rock record. Since the Curiosity rover landed in Gale crater in August 2012, the Mars Science Laboratory Science Team has explored the origins and habitability of ancient fluvial, deltaic, lacustrine and aeolian deposits preserved within the crater. This study describes the sedimentology of a ca 13 m thick succession named the Pahrump Hills member of the Murray formation, the first thick fine‐grained deposit discovered in situ on Mars. This work evaluates the depositional processes responsible for its formation and reconstructs its palaeoenvironmental setting. The Pahrump Hills succession can be sub‐divided into four distinct sedimentary facies: (i) thinly laminated mudstone; (ii) low‐angle cross‐stratified mudstone; (iii) cross‐stratified sandstone; and (iv) thickly laminated mudstone–sandstone. The very fine grain size of the mudstone facies and abundant millimetre‐scale and sub‐millimetre‐scale laminations exhibiting quasi‐uniform thickness throughout the Pahrump Hills succession are most consistent with lacustrine deposition. Low‐angle geometric discordances in the mudstone facies are interpreted as ‘scour and drape’ structures and suggest the action of currents, such as those associated with hyperpycnal river‐generated plumes plunging into a lake. Observation of an overall upward coarsening in grain size and thickening of laminae throughout the Pahrump Hills succession is consistent with deposition from basinward progradation of a fluvial‐deltaic system derived from the northern crater rim into the Gale crater lake. Palaeohydraulic modelling constrains the salinity of the ancient lake in Gale crater: assuming river sediment concentrations typical of floods on Earth, plunging river plumes and sedimentary structures like those observed at Pahrump Hills would have required lake densities near freshwater to form. The depositional model for the Pahrump Hills member presented here implies the presence of an ancient sustained, habitable freshwater lake in Gale crater for at least ca 10 3 to 10 7 Earth years.

Sedimentology↗

USGS2017

Diagenetic silica enrichment and late-stage groundwater activity in Gale crater, Mars

Diagenetic silica enrichment in fracture-associated halos that crosscut lacustrine and unconformably overlying aeolian sedimentary bedrock is observed on the lower north slope of Aeolis Mons in Gale crater, Mars. The diagenetic silica enrichment is colocated with detrital silica enrichment observed in the lacustrine bedrock yet extends into a considerably younger, unconformably draping aeolian sandstone, implying that diagenetic silica enrichment postdates the detrital silica enrichment. A causal connection between the detrital and diagenetic silica enrichment implies that water was present in the subsurface of Gale crater long after deposition of the lacustrine sediments and that it mobilized detrital amorphous silica and precipitated it along fractures in the overlying bedrock. Although absolute timing is uncertain, the observed diagenesis likely represents some of the most recent groundwater activity in Gale crater and suggests that the timescale of potential habitability extended considerably beyond the time that the lacustrine sediments of Aeolis Mons were deposited.

Geophysical Research Letters↗

USGS2015

Curiosity’s robotic arm-mounted Mars Hand Lens Imager (MAHLI): Characterization and calibration status

MAHLI (Mars Hand Lens Imager) is a 2-megapixel, Bayer pattern color CCD camera with a macro lens mounted on a rotatable turret at the end of the 2-meters-long robotic arm aboard the Mars Science Laboratory rover, Curiosity. The camera includes white and longwave ultraviolet LEDs to illuminate targets at night. Onboard data processing services include focus stack merging and data compression. Here we report on the results and status of MAHLI characterization and calibration, covering the pre-launch period from August 2008 through the early months of the extended surface mission through February 2015. Since landing in Gale crater in August 2012, MAHLI has been used for a wide range of science and engineering applications, including distinction among a variety of mafic, siliciclastic sedimentary rocks; investigation of grain-scale rock, regolith, and eolian sediment textures and structures; imaging of the landscape; inspection and monitoring of rover and science instrument hardware concerns; and supporting geologic sample selection, extraction, analysis, delivery, and documentation. The camera has a dust cover and focus mechanism actuated by a single stepper motor. The transparent cover was coated with a thin film of dust during landing, thus MAHLI is usually operated with the cover open. The camera focuses over a range from a working distance of 2.04 cm to infinity; the highest resolution images are at 13.9 µm per pixel; images acquired from 6.9 cm show features at the same scale as the Mars Exploration Rover Microscopic Imagers at 31 µm/pixel; and 100 µm/pixel is achieved at a working distance of ~26.5 cm. The very highest resolution images returned from Mars permit distinction of high contrast silt grains in the 30–40 µm size range. MAHLI has performed well; the images need no calibration in order to achieve most of the investigation’s science and engineering goals. The positioning and repeatability of robotic arm placement of the MAHLI camera head have been excellent on Mars, often with the hardware arriving within millimeters of expectation. Stability while imaging is usually such that the images are sharply focused; some exceptions—thought to result from motion induced by wind—have occurred during longer exposure LED-illuminated night imaging. Image calibration includes relative radiometric correction by removal of dark current and application of a flat field. Dark current is negligible to minor for typical daytime exposure durations and temperatures at the Gale field site. A pre-launch flat field product is usually applied to the data but new products created from images acquired by MAHLI of the Martian sky are superior and can provide a relative radiometric accuracy of ~6%. The camera lens imparts negligible distortion to its images; camera models derived from pre-launch data, with CAHV and CAHVOR parameters captured in their archived labels, can be applied to the images for analysis. MAHLI data and derived products, including pre-launch images, are archived with the NASA Planetary Data System (PDS). This report includes supplementary calibration and characterization data that are not available in the PDS archive (see supplement file MAHLITechRept0001_Supplement.zip).

MSL MAHLI Technical Report↗