Geology topics

Jared R. Peacock

Publications and source records attributed to Jared R. Peacock.

At least 37 records · Page 2Linked to original sources

USGS2021

Bottom-up and top-down control on hydrothermal resources in the Great Basin: An example from Gabbs Valley, Nevada

The Great Basin in the western United States hosts various hydrothermal systems, including both active geothermal systems and ancient systems preserved as mineral deposits. New magnetotelluric and structural geologic data were collected in the Gabbs Valley area of western Nevada to demonstrate the advantage of imaging the full crustal column below known hydrothermal systems. Three-dimensional models are developed and jointly interpreted where the key findings are bottom-up and top-down controls on hydrothermal systems. Bottom-up control is dictated by weaknesses in the brittle-ductile transition that allow hydrothermal fluids to propagate into the crust; these are often collocated with Miocene volcanic structures. Top-down control is dominated by modern Walker Lane and Basin and Range tectonics that control fluid transport through the middle and upper crust. This study demonstrates that the characterization of regional mineral and geothermal resources is better informed by imaging lower crustal structures and preferential pathways to the surface.

Geophysical Research Letters↗

USGS2021

Three-dimensional electrical resistivity characterization of Mountain Pass, California and surrounding region

The Sulphide Queen carbonatite deposit at Mountain Pass in southeast California is a world class rare earth element (REE) resource. This study images electrical resistivity structure of the REE deposit and surrounding area to characterize resources under cover. An east-west elongated grid (35 × 15 km) of 65 wideband magnetotelluric stations spanning from eastern Shadow Valley to eastern Ivanpah Valley were collected and modeled in three-dimensions (3-D). Gravity, aeromagnetic, and geologic data are used to inform interpretation of structures in the resistivity model, including the following observations. Shadow Valley is filled with conductive sediment that locally dips southward to a depth of 1 km. The Kingston Range-Halloran Hills detachment fault dips westward at ∼15 degrees. The REE deposit is a moderate low resistivity zone dipping southwest to a possible depth of ∼1 km, and is bounded by the North and South faults and bisected by the Middle fault. Ivanpah Dry Lake is underlain by a north striking southward dipping sedimentary basin. Two possible zones of mineralization are observed in Ivanpah Valley, one along the western edge of Ivanpah Dry Lake and one on the western edge of valley along a new inferred fault. The brittle-ductile transition is imaged at ∼10 km below mean sea level. No deep electrically conductive structures are imaged to be related to the REE deposit likely due to the complex geologic history of the Mojave terrane. Future studies should regional target Proterozoic rocks and search within for geophysical signatures similar to Mountain Pass.

California↗

USGS2021

Multi-geophysical parameter classification of the Montserrat geothermal system

Multi-geophysical parameter classification can help to reduce the uncertainties of interpretations that often rely on one geophysical technique. Integrating these varying datasets requires a more robust classification approach rather than traditional qualitative methods. In this study, we applied the Fuzzy c-means (FCM) method to quantitatively classify similarities in a high resolution seismic tomography, a magnetotellurics and gravity datasets obtained in Montserrat. To group similar datapoints, this application uses a Euclidean distance measure and a membership function. Assigned membership values indicate the degree to which a datapoint belongs to a specific class. The spatial distribution of the derived classes, each classified with distinct geophysical parameters, helped to provide new structural and petrological information of the Montserrat geothermal system. In comparison to previous models, our new cluster model highlights two major improvements. These include the resolution and assessment of the spatial extension and 3D geometry of previously undetected features within the Montserrat geothermal system and the constrain and characterization of earlier identified anomalies. We additionally utilized geological and petrological data obtained from three geothermal wells in the Montserrat geothermal system to help validate our classifications. Based on a semi-quantitative approach we assessed the reliability of the FCM technique in relation to the likely uncertainties of the different geophysical models.

Geothermics↗

USGS2020

Temporal magnetotellurics reveals mechanics of the 2012 Mount Tongariro, NZ eruption

Monitoring dynamics of volcanic eruptions with geophysics is challenging. In August and November 2012, two small eruptions from Mount Tongariro provided a unique opportunity to image subsurface changes caused by the eruptions. A detailed magnetotelluric survey of the Tongariro volcanic complex completed prior to the eruption (2008–2010) provides the preeruption structure of the magmatic system. A subset of the initial measurement locations was reoccupied in June 2013. Significant changes were observed in phase tensor data at sites close to the eruptive center. Although subsurface electrical resistivity changed, the geometry of the preeruptive reservoir did not. These subsurface resistivity variations are interpreted as being predominantly caused by interaction of partial melt and the overlying brine layer causing volume reduction of the brine layer through phreatic eruption. The ability to detect significant changes associated with the magma reservoir suggests that magnetotellurics can be a valuable volcano monitoring tool.

Mount Tongariro↗

USGS2020

Geophysical characterization of the Northwest Geysers geothermal field, California

The Clear Lake Volcanic Field in northern California is the youngest and northern-most part of a long-lived volcanic system that has produced recent (~10 ka) eruptions. Adjacent to the Clear Lake Volcanic Field is the worlds largest energy producing geothermal field, The Geysers. The hottest part of The Geysers geothermal field is in the northwest where temperatures reach ~400 C at 3 km depth. Low permeability, high thermal gradients, and low steam saturation prescribed development of an enhanced geothermal system (EGS) in the Northwest Geysers to increase energy producing capacity. Though the Northwest Geysers is known to be the hottest part of the field, geophysical methods have failed to adequately image any inferred heat source. This project aims to image the heat source of the Northwest Geysers using newly collected gravity and magnetotelluric (MT) measurements. Gravity data were jointly modeled with existing magnetic data along a two-dimensional profile aligned with an existing geologic cross-section. The key feature of the potential field model is a low-density, low-susceptibility body at 5 km depth (bmsl) under the EGS. MT data were modeled in three-dimensions to characterize subsurface resistivity structure, where the upper 3 km of the resistivity model agrees well with existing data. Lithologic and steam saturation are estimated from modeled resistivity values using existing geophysical data. Below 3 km depth (bmsl), the resistivity model images a possible young intrusion under the EGS. A possible zone of partial melt (<5%) below 7 km depth (bmsl) in the northwestern part of the field is also imaged which extends northeast towards the main part of the Clear Lake Volcanic Field.

California↗

USGS2020

Play fairway analysis in geothermal exploration: The Snake River plain volcanic province

The Snake River volcanic province (SRP) has long been considered a target for geothermal development. It overlies a thermal anomaly that extends deep into the mantle and represents one of the highest heat flow provinces in North America, but systematic exploration been hindered by lack of a conceptual model. Play Fairway Analysis (PFA) is a methodology adapted from the petroleum industry that integrates data at the regional or basin scale to define favorable plays for exploration in a systematic fashion. The success of play fairway analysis in geothermal exploration depends critically on defining a systematic methodology that is grounded in theory and adapted to the geologic and hydrologic framework of real geothermal systems. This study focused on identifying three critical resource parameters for exploitable hydrothermal systems in the Snake River Plain: heat source, reservoir and recharge permeability, and cap or seal. Data included in the compilation for Heat were heat flow, the distribution and ages of volcanic vents, groundwater temperatures, thermal springs and wells, helium isotope anomalies, and reservoir temperatures estimated using geothermometry. Permeability was derived from stress orientations and magnitudes, post-Miocene faults, and subsurface structural lineaments based on magnetic and gravity data. Data for Seal included the distribution of impermeable lake sediments and clay-seal associated with hydrothermal alteration below the regional aquifer. These data were used to compile Common Risk Segment (CRS) maps for Heat, Permeability and Seal, which were combined to create a Composite Common Risk Segment (CCRS) map for all of southern Idaho that reflects the risk associated with geothermal resource exploration and helps to identify favorable resource tracks. Our data suggests that important undiscovered geothermal resources may be located in several areas of the SRP, including the western SRP (associated with buried lineaments capped by lacustrine sediment), at lineament intersections in the central SRP, and along the margins of the eastern SRP. These blind resources are associated with temperatures sufficient to support electricity production, and may be exploitable with existing deep drilling technology. We are testing our methodology by drilling a geothermal test well in Camas Prairie, ID, confirm our predictions of permeability and reservoir temperature.

Idaho↗

USGS2019

Geophysical characterization of a Proterozoic REE terrane at Mountain Pass, eastern Mojave Desert, California

Mountain Pass, California (USA), located in the eastern Mojave Desert, hosts one of the world’s richest rare earth element (REE) deposits. The REE-rich terrane occurs in a 2.5-km-wide, northwest-trending belt of Mesoproterozoic (1.4 Ga) stocks and dikes, which intrude a larger Paleoproterozoic (1.7 Ga) metamorphic block that extends ∼10 km southward from Clark Mountain to the eastern Mescal Range. To characterize the REE terrane, gravity, magnetic, magnetotelluric, and whole-rock physical property data were analyzed. Geophysical data reveal that the Mountain Pass carbonatite body is associated with an ∼5 mGal local gravity high that is superimposed on a gravity terrace (∼4 km wide) caused by granitic Paleoproterozoic host rocks. Physical rock property data indicate that the Mountain Pass REE suite is essentially nonmagnetic at the surface with a magnetic susceptibility of 2.0 × 10 −3 SI ( n = 57), and lower-than-expected magnetizations may be the result of alteration. However, aeromagnetic data indicate that the intrusive suite occurs along the eastern edge of a distinct northwest-trending aeromagnetic high along the eastern Mescal Range. The source of this magnetic anomaly is ∼1.5–2 km below the surface and coincides with an electrical conductivity zone that is several orders of magnitude more conductive than the surrounding rock. The source of the magnetic anomaly is likely a moderately magnetic pluton. Combined geophysical data and models suggest that the carbonatite and its associated REE-enriched ultrapotassic suite were preferentially emplaced along a northwest-trending zone of weakness, which has potential implications for regional mineral exploration.

California↗

USGS2019

Crustal magmatism and anisotropy beneath the Arabian Shield - A cautionary tale

Volcanism in Saudi Arabia includes a historic eruption close to the holy city of Al Madinah. As part of a volcanic hazard assessment of this area, magnetotelluric (MT) data were collected to investigate the structural setting, the distribution of melt within the crust, and the mantle source of volcanism. Interpretation of a new 3‐D resistivity model includes a shallow graben beneath thin lava fields (Harrats), a melt‐free upper crust, and decompression melting in the asthenosphere below thin lithosphere. Within the lower crust the model images elongate conductivity anomalies, one of which was attributed in a previous MT study to melt. The regional MT data, combined with perspective from geology and geophysical modeling, suggest the lower crust is anisotropic with no interconnected melt zones. These divergent interpretations have distinct hazard implications and highlight the importance of large survey aperture and anisotropic modeling to MT studies of volcanic regions. Lower‐crustal anisotropy extends beyond the Harrat, with the most conductive direction oriented N10°E and a factor of 3–5, determined from 2‐D anisotropic inversion, between the most and least conductive directions. The enhanced conductivity is likely due to interconnected grain boundary graphite, while the anisotropy direction reflects either frozen‐in fabric from Neoproterozoic stabilization of the Arabian Shield or modern ductile deformation driven by channelized asthenospheric flow coupled through a thin rigid mantle lid. Asthenospheric melt is interpreted to transect the crust primarily through diking, with limited melt storage and short residence times in the crust.

Arabian Shield↗

USGS2019

The MTPy software package for magnetotelluric data analysis and visualisation

The magnetotelluric (MT) method is increasingly being applied to a wide variety of geoscience problems. However, the software available for MT data analysis and interpretation is still very limited in comparison to many of the more mature geophysical methods such as the gravity, magnetic or seismic reflection methods. MTPy is an open source Python package to assist with MT data processing, analysis, modelling, visualization and interpretation. It was initiated at the University of Adelaide in 2013 as a means to store and share Python code amongst the MT community (Krieger & Peacock, 2014). Here we provide an overview of the software and describe recent developments to MTPy. These include new functionality and a clean up and standardization of the source code, as well as the addition of an integrated testing suite, documentation, and examples in order to facilitate the use of MT in the wider geophysics community.

Journal of Open Source Software↗

USGS2019

Geophysical Characterization of the heat source in the Northwest Geysers, California

The Geysers, in northern California, is the largest energy producing geothermal field in the world. Looking to expand capacity, the operator Calpine Corporation developed an anomalously hot (~400 °C at 2.5 km depth) part of the field in the northwest Geysers, including testing of an enhanced geothermal systems (EGS). Though the area is anomalously hot, geophysical methods have failed to adequately image any inferred magmatic heat source. Gravity measurements were collected and jointly modeled with existing magnetic data along a two-dimensional profile aligned with an existing geologic cross-section. The key feature of the potential field model is a low-density, low-susceptibility body below the EGS at 5 km depth. Magnetotelluric (MT) measurements were collected around the northwest Geysers and modeled in three-dimensions to characterize subsurface resistivity structure. The resistivity model images an extension of a Quaternary granitic pluton locally known as “the felsite” under the EGS project and a possible zone of partial melt (<10%) below 7 km in the northwestern part of the field.

California↗

USGS2018

Crustal inheritance and a top-down control on arc magmatism at Mount St Helens

In a subduction zone, the volcanic arc marks the location where magma, generated via flux melting in the mantle wedge, migrates through the crust and erupts. While the location of deep magma broadly defines the arc position, here we argue that crustal structures, identified in geophysical data from the Washington Cascades magmatic arc, are equally important in controlling magma ascent and defining the spatial distribution and compositional variability of erupted material. As imaged by a three-dimensional resistivity model, a broad lower-crustal mush zone containing 3–10% interconnected melt underlies this segment of the arc, interpreted to episodically feed upper-crustal magmatic systems and drive eruptions. Mount St Helens is fed by melt channelled around a mid-Tertiary batholith also imaged in the resistivity model and supported by potential–field data. Regionally, volcanism and seismicity are almost exclusive of the batholith, while at Mount St Helens, along its margin, the ascent of viscous felsic melt is enabled by deep-seated metasedimentary rocks. Both the anomalous forearc location and composition of St Helens magmas are products of this zone of localized extension along the batholith margin. This work is a compelling example of inherited structural control on local stress state and magmatism.

Washington↗

USGS2018

Discovery of a blind geothermal system in Southern Gabbs Valley, western Nevada, through application of the play fairway analysis at multiple scales

The Great Basin region is capable of generating much greater amounts of geothermal energy than currently produced. Most geothermal resources in this region are blind, and thus favorable characteristics for geothermal activity must be synthesized and methodologies developed to discover new commercial-grade systems. The geothermal play fairway concept involves integration of multiple parameters indicative of geothermal activity to identify promising areas for new development. In the Nevada play fairway project, geologic, geochemical, and geophysical parameters were initially synthesized to produce a new geothermal potential map of 96,000 km2. Southern Gabbs Valley in western Nevada is a particularly promising site selected for detailed study. It contains favorable structural settings, including Quaternary fault intersections and a displacement transfer zone. Geologic, geophysical, and geochemical techniques were employed to define the most likely sites for high permeability and select targets for temperature-gradient holes. Permeability models were revised to reflect results of detailed analyses and generate new detailed play fairway maps. The most promising site lies in an area of multiple fault intersections in a broader displacement transfer zone directly north of the Petrified Springs dextral fault, as revealed by gravity, magnetic, and MT data. A 2-m temperature anomaly and warm temperature gradient wells (~120oC at ~150 m depth) confirm the presence of a geothermal system and provide initial validation of the play fairway methodology. The system is blind, with no surface hot springs, fumaroles, or paleo-geothermal deposits. Lessons learned in the detailed studies include: 1) initially identified sites commonly include multiple favorable settings at a finer scale; 2) promising sites in Cenozoic basins cannot be recognized without detailed geophysical surveys; and 3) play fairway analysis is critical at multiple scales.

Geothermal Resources Council Transactions↗

USGS2018

Geothermal potential of the Umatilla Indian Reservation, Oregon: Evidence from detailed geophysical investigations

Recent geologic and geophysical investigations were undertaken in northeastern Oregon to better assess earthquake hazards in the region and determine relative favorability for geothermal energy development on lands of the Confederated Tribes of the Umatilla Indian Reservation (CTUIR). This work was funded in part by a Bureau of Indian Affairs grant awarded to the CTUIR to identify areas most suitable for further exploration of geothermal resources. Results from this work were utilized as inputs to a geothermal favorability modeling process that led to the identification of target sites for further geothermal investigation. Beyond the geothermal aspect of this project, the region is of great tectonic significance as it marks the intersection of two major physiographic and geophysical features, the Klamath-Blue Mountain lineament (KBL) and Olympic-Wallowa lineament (OWL), inferred to represent major basement boundaries. The Thorn Hollow and Hite faults, which appear to be major linkages between the KBL and OWL, run through the study area. New aeromagnetic, gravity and magnetotelluric (MT) surveying, along with fault analyses, were conducted as part of this effort. Detailed geophysical exploration resulted in the collection of 1,380 new gravity stations, 34,524-line kilometers of aeromagnetic data (covering 12,524 km2) and measurements from 36 MT stations. Two-dimensional (2D) forward-modeling was executed along several profiles using gravity and aeromagnetic data, combined with existing geologic mapping and rock property constraints measured from hand samples and outcrops. These models are used to define lithologic contacts in the subsurface in the absence of well logs or borehole data to determine possible geothermal fluid reservoirs, as well as identify major structures that may act as conduits for the upward migration of geothermal fluids.

Oregon↗

USGS2018

A geophysical characterization of the structural framework of the Camas Prairie Geothermal System, southcentral Idaho

Play Fairway Analysis methods, utilizing existing geologic, thermal, geochemical, and geophysical data were employed in an initial assessment of geothermal resources in the Snake River Plain. These efforts identified the Camas Prairie in southcentral Idaho as a region with elevated resource potential. Subsequent efforts included structural and geophysical data collection to identify the most favorable structural settings for exploiting resources in the valley. The present work involved high-resolution gravity, magnetic, magnetotellurics (MT), field mapping, and seismic surveys to further characterize the system and target sites for exploration drilling around Barron’s Hot Springs (BHS) in the southwest part of the valley. Geophysical mapping and modeling reveal that the BHS coincides with a complex intersection of two major fault systems: a prominent NW-trending system that includes the Pothole fault, and EW-trending basin-bounding faults that control NS-extension. This complex zone includes a dense network of EW-oriented faults and a right stepover in the Pothole fault which, given the dominant dextral-normal to normal slip inferred for this fault, would promote extension in the immediate vicinity of the BHS. Surface faulting in this region indicate Pleistocene or younger slip, and seismic imaging documents offsets of shallow strata that suggest ongoing activity on these structures. MT modeling results show that this zone also coincides with a prominent conductive anomaly, characteristic of the presence of hydrothermal alteration or hydrothermal fluids. These results point to the importance of these structures in maintaining current and long-lived shallow hydrothermal activity around the BHS. The detailed structural mapping and conceptual framework developed from this study provide critical constraints for siting a drill hole aimed at documenting reservoir characteristics and informing potential future development of these geothermal resources.

Idaho↗

USGS2016

Conductivity response to intraplate deformation: Evidence for metamorphic devolatilization and crustal‐scale fluid focusing

We present two‐dimensional electrical resistivity models of two 40 km magnetotelluric (MT) profiles across the Frome Embayment to the east of the northern Flinders Ranges, South Australia. The lower crust shows low resistivity of 10 Ω m at around 30 km depth. The middle crust is dominated by resistive (>1000 Ω m) basement rocks underlying the Flinders Ranges. Adjacent to the ranges, conductive lower crust is connected to vertical zones of higher conductivity extending to just below the brittle‐ductile transition at ∼10 km depth. The conductive zones narrow in the brittle upper crust and dip at roughly 45° beneath the surface. Zones of enhanced conductivity coincide with higher strain due to topographic loading and sparse seismicity. We propose that fluids are generated through neotectonic metamorphic devolatilization. Low‐resistivity zones display areas of fluid pathways along either preexisting faults or an effect of crustal compression leading to metamorphic fluid generation. The lower crustal conductors are responding to long‐wavelength flexure‐induced strain, while the upper crustal conductors are responding to short wavelength faulting in the brittle regime. MT is a useful tool for imaging crustal strain in response to far‐field stresses in an intraplate setting and provides important constraints for geodynamic modeling and crustal rheology.

South Australia↗

USGS2016

Three-dimensional electrical resistivity model of the hydrothermal system in Long Valley Caldera, California, from magnetotellurics

Though shallow flow of hydrothermal fluids in Long Valley Caldera, California, has been well studied, neither the hydrothermal source reservoir nor heat source has been well characterized. Here a grid of magnetotelluric data were collected around the Long Valley volcanic system and modeled in 3-D. The preferred electrical resistivity model suggests that the source reservoir is a narrow east-west elongated body 4 km below the west moat. The heat source could be a zone of 2–5% partial melt 8 km below Deer Mountain. Additionally, a collection of hypersaline fluids, not connected to the shallow hydrothermal system, is found 3 km below the medial graben, which could originate from a zone of 5–10% partial melt 8 km below the south moat. Below Mammoth Mountain is a 3 km thick isolated body containing fluids and gases originating from an 8 km deep zone of 5–10% basaltic partial melt.

California↗

USGS2016

Magnetotelluric investigation of the Vestfold Hills and Rauer Group, East Antarctica

The Vestfold Hills and Rauer Group in East Antarctica have contrasting Archean to Neoproterozoic geological histories and are believed to be juxtaposed along a suture zone that now lies beneath the Sørsdal Glacier. Exact location and age of this suture zone are unknown, as is its relationship to regional deformation associated with the amalgamation of East Gondwana. To image the suture zone, magnetotelluric (MT) data were collected in Prydz Bay, East Antarctica, mainly along a profile crossing the Sørsdal Glacier and regions inland of the Vestfold Hills and Rauer Group islands. Time-frequency analysis of the MT time series yielded three important observations: (1) Wind speeds in excess of &sim;8 m/s reduce coherence between electric and magnetic fields due to charged wind-blown particles of ice and snow. (2) Estimation of the MT transfer function is best between 1000 and 1400 UT when ionospheric Hall currents enhance the magnetic source field. (3) Nonplanar source field effects were minimal but detectable and removed from estimation of the MT transfer function. Inversions of MT data in 2-D and 3-D produce similar resistivity models, where structures in the preferred 3-D resistivity model correlate strongly with regional magnetic data. The electrically conductive Rauer Group is separated from the less conductive Vestfold Hills by a resistive zone under the Sørsdal Glacier, which is interpreted to be caused by oxidation during suturing. Though a suture zone has been imaged, no time constrains on suturing can be made from the MT data.

Journal of Geophysical Research B: Solid Earth↗

USGS2015

Imaging the magmatic system of Mono Basin, California with magnetotellurics in three--dimensions

A three–dimensional (3D) electrical resistivity model of Mono Basin in eastern California unveils a complex subsurface filled with zones of partial melt, fluid–filled fracture networks, cold plutons, and regional faults. In 2013, 62 broadband magnetotelluric (MT) stations were collected in an array around southeastern Mono Basin from which a 3D electrical resistivity model was created with a resolvable depth of 35 km. Multiple robust electrical resistivity features were found that correlate with existing geophysical observations. The most robust features are two 300 ± 50 km3 near-vertical conductive bodies (3–10 Ω·m) that underlie the southeast and north-eastern margin of Mono Craters below 10 km depth. These features are interpreted as magmatic crystal–melt mush zones of 15 ± 5% interstitial melt surrounded by hydrothermal fluids and are likely sources for Holocene eruptions. Two conductive east–dipping structures appear to connect each magma source region to the surface. A conductive arc–like structure (< 0.9 Ω·m) links the northernmost mush column at 10 km depth to just below vents near Panum Crater, where the high conductivity suggests the presence of hydrothermal fluids. The connection from the southernmost mush column at 10 km depth to below South Coulée is less obvious with higher resistivity (200 Ω·m) suggestive of a cooled connection. A third, less constrained conductive feature (4–10 Ω·m) 15 km deep extending to 35 km is located west of Mono Craters near the eastern front of the Sierra Nevada escarpment, and is coincident with a zone of sporadic, long–period earthquakes that are characteristic of a fluid-filled (magmatic or metamorphic) fracture network. A resistive feature (103–105 Ω·m) located under Aeolian Buttes contains a deep root down to 25 km. The eastern edge of this resistor appears to structurally control the arcuate shape of Mono Craters. These observations have been combined to form a new conceptual model of the magmatic system beneath Mono Craters to a depth of 30 km.

California↗