Geology topics

Jaime E. Delano

Publications and source records attributed to Jaime E. Delano.

6 recordsLinked to original sources

USGS2020

Documentation of Surface Fault Rupture and Ground‐Deformation Features Produced by the 4 and 5 July 2019 Mw 6.4 and Mw 7.1 Ridgecrest Earthquake Sequence

The M w "> M w Mw 6.4 and M w "> M w Mw 7.1 Ridgecrest earthquake sequence occurred on 4 and 5 July 2019 within the eastern California shear zone of southern California. Both events produced extensive surface faulting and ground deformation within Indian Wells Valley and Searles Valley. In the weeks following the earthquakes, more than six dozen scientists from government, academia, and the private sector carefully documented the surface faulting and ground‐deformation features. As of December 2019, we have compiled a total of more than 6000 ground observations; approximately 1500 of these simply note the presence or absence of fault rupture or ground failure, but the remainder include detailed descriptions and other documentation, including tens of thousands of photographs. More than 1100 of these observations also include quantitative field measurements of displacement sense and magnitude. These field observations were supplemented by mapping of fault rupture and ground‐deformation features directly in the field as well as by interpreting the location and extent of surface faulting and ground deformation from optical imagery and geodetic image products. We identified greater than 68 km of fault rupture produced by both earthquakes as well as numerous sites of ground deformation resulting from liquefaction or slope failure. These observations comprise a dataset that is fundamental to understanding the processes that controlled this earthquake sequence and for improving earthquake hazard estimates in the region. This article documents the types of data collected during postearthquake field investigations, the compilation effort, and the digital data products resulting from these efforts.

California↗

USGS2020

Evidence for late Quaternary deformation along Crowley's Ridge, New Madrid seismic zone

The New Madrid seismic zone has been the source of multiple major (M ~7.0–7.5) earthquakes in the past 2 ka, yet the surface expression of recent deformation remains ambiguous. Crowleys Ridge, a linear ridge trending north‐south for 300+ km through the Mississippi Embayment, has been interpreted as either a fault‐bounded uplift or a nontectonic erosional remnant. New and previously published seismic reflection and shallow resistivity data show discontinuities at the ridge margins in Plio‐Pleistocene strata, yet the timing of most recent faulting and the lateral extent of these faults remain unknown. To assess Pleistocene‐to‐recent tectonic activity of Crowleys Ridge, we perform landscape‐scale geomorphic analyses, such as relief, slope, hypsometry, and drainage basin shape, on a 10‐m digital elevation model (DEM). North‐to‐south variations in geomorphic indices indicate Pleistocene‐to‐recent tectonic uplift of the southern ridge. Moreover, mapping on a <1‐m lidar‐derived DEM reveals scarps on late Pleistocene geomorphic surfaces. The scarps are primarily located along the southern ridge, trend parallel to the ridge margin discontinuously for 0.1–1 km, and vertically offset <56 ka surfaces 0.4 m with up to 6 m of tilting. These landscape‐scale patterns and scarps, integrated with discontinuities in the seismic reflection and resistivity data, provide evidence of low‐rate (<0.2 mm/year) late Quaternary tectonic activity along the southern segment of Crowleys Ridge. The interpretations agree with recent tectonic models suggesting southern Crowleys Ridge is a compressional step over in a right‐lateral fault system within the Reelfoot Rift.

Arkansas, Illinois, Kentucky, Missouri, Tennessee↗

USGS2019

Holocene earthquake history and slip rate of the southern Teton fault, Wyoming, USA

The 72-km-long Teton normal fault bounds the eastern base of the Teton Range in northwestern Wyoming, USA. Although geomorphic surfaces along the fault record latest Pleistocene to Holocene fault movement, the postglacial earthquake history of the fault has remained enigmatic. We excavated a paleoseismic trench at the Buffalo Bowl site along the southernmost part of the fault to determine its Holocene rupture history and slip rate. At the site, ∼6.3 m of displacement postdates an early Holocene (ca. 10.5 ka) alluvial-fan surface. We document evidence of three surface-faulting earthquakes based on packages of scarp-derived colluvium that postdate the alluvial-fan units. Bayesian modeling of radiocarbon and luminescence ages yields earthquake times of ca. 9.9 ka, ca. 7.1 ka, and ca. 4.6 ka, forming the longest, most complete paleoseismic record of the Teton fault. We integrate these data with a displaced deglacial surface 4 km NE at Granite Canyon to calculate a postglacial to mid-Holocene (14.4−4.6 ka) slip rate of ∼1.1 mm/yr. Our analysis also suggests that the postglacial to early Holocene (14.4−9.9 ka) slip rate exceeds the Holocene (9.9−4.6 ka) rate by a factor of ∼2 (maximum of 3); however, a uniform rate for the fault is possible considering the 95% slip-rate errors. The ∼5 k.y. elapsed time since the last rupture of the southernmost Teton fault implies a current slip deficit of ∼4−5 m, which is possibly explained by spatially/temporally incomplete paleoseismic data, irregular earthquake recurrence, and/or variable per-event displacement. Our study emphasizes the importance of minimizing slip-rate uncertainties by integrating paleoseismic and geomorphic data sets and capturing multiple earthquake cycles.

Wyoming↗

USGS2019

Four major Holocene earthquakes on the Reelfoot fault recorded by sackungen in the New Madrid seismic zone, USA

Three sequences of well-documented, major ~M7+ earthquakes (1811-1812 CE, ~1450 CE, and ~900 CE) in the New Madrid seismic zone, USA, contribute significantly to seismic hazard in the region. However, it is unknown whether this <550 yr recurrence interval has been constant throughout the Holocene given limited geomorphic evidence of prior earthquakes. We extend the record of paleoearthquakes along the Reelfoot fault via investigation of ridge-top gravitational failure features, interpreted as sackungen. The sackungen occur in bluffs along the eastern margin of the Mississippi River floodplain and are concentrated near (<15 km) the southwest-dipping Reelfoot reverse fault. A paleoseismic trench excavated across sackungen at the Paw Paw site exposed four packages of colluvial sediment that postdate 30-11 ka Peoria loess. We interpret the colluvial packages to have been deposited following episodic failure of the sackungen as a result of strong ground motions from the following sequence of earthquakes: event 4, 1640 ± 1730 BCE; event 3, 340 ± 670 CE; event 2, 1430 ± 380 CE; and event 1, 1810 ± 50 CE (2-sigma). Event timing corresponds to previously documented earthquakes and represents the longest archive of paleoearthquakes on the Reelfoot fault. If the trenched sackungen record all major Reelfoot fault earthquakes, our observations in combination with prior investigations indicate a period of quiescence from at least 11 – 4.7 ka, followed by four major seismic events culminating in the 1811-1812 CE sequence. This clustered earthquake recurrence helps place bounds on seismic-hazard and geodynamic models in the New Madrid seismic zone.

Arkansas, Missouri↗

USGS2018

Coseismic sackungen in the New Madrid seismic zone, USA

High‐resolution lidar reveals newly recognized evidence of strong shaking in the New Madrid seismic zone in the central United States. We mapped concentrations of sackungen (ridgetop spreading features) on bluffs along the eastern Mississippi River valley in northwestern Tennessee that likely form or are reactivated during large earthquakes. These sackungen are concentrated on the hanging wall of the Reelfoot reverse fault and show a preferential orientation indicating ground failure normal to fault strike. These observations suggest that the sackungen record one or more earthquakes on the southern Reelfoot fault since the deposition of the ~30‐ to 11‐ka Peoria Loess and potentially constrain the minimum intensity of near‐fault ground motion. This study demonstrates that sackungen can be used to infer fault source and mechanism and, in combination with field‐based techniques, improve paleoseismic records and seismic hazard models.

New Madrid Seismic Zone↗

USGS2017

Influence of the megathrust earthquake cycle on upper-plate deformation in the Cascadia forearc of Washington State, USA

The influence of subduction zone earthquake cycle processes on permanent forearc deformation is poorly understood. In the Cascadia subduction zone forearc of Washington State, USA, deformed and incised fluvial terraces serve as archives of longer-term (10 3 –10 4 yr) strain manifest as both fluvial incision and slip on upper-plate faults. We focus on comparing these geomorphic records in the Wynoochee River valley in the southern Olympic Mountains with short-term (10 1 yr) deformation driven by interseismic subduction zone coupling. We use optically stimulated luminescence dating and high-resolution elevation data to characterize strath terrace incision and differential uplift across the Canyon River fault, which cuts Wynoochee River terraces. This analysis demonstrates reverse slip rates of ∼0.1–0.3 mm/yr over the past ∼12–37 k.y., which agree with rates predicted by a GPS-constrained boundary element model of interseismic stress from Cascadia subduction zone coupling. Similarly, model-predicted patterns of interseismic uplift mimic the overall pattern of incision in the lower Wynoochee River valley, as revealed by strath elevations dated at 14.1 ± 1.2 ka. Agreement between modeled short-term and observed long-term records of forearc strain suggests that interseismic stress drives slip on upper-plate faults and fluvial incision in Cascadia. Consistency over multiple time scales may indicate relative stability in spatial patterns of subduction zone coupling over at least ∼10 4 yr intervals.

Washington↗