Geology Reports⌕ Search

Geology topics

J.W. Whitney

Publications and source records attributed to J.W. Whitney.

17 recordsLinked to original sources
USGS2007

GIS methodology for quantifying channel change in Las Vegas, Nevada

This study applies spatial analyses to examine the consequences of accelerated urban expansion on a hydrologic system over a period of 24 years. Three sets of historical aerial photos are used in a GIS analysis to document the geomorphic history of Las Vegas Wash, which drains the rapidly growing Las Vegas urban area in southern Nevada. New spatial techniques are introduced to make quantitative measurements of the erosion at three specific time intervals in the hydrologic evolution of the channel and floodplain. Unlike other erosion studies that use two different elevation surfaces to assess erosion, this study used a single elevation surface to remove systematic and nonsystemic elevation errors. The spatial analysis quantifies channel changes for discrete time periods, calculates erosion volumes, and provides a foundation to examine how the specific mechanisms related to urban expansion have affected Las Vegas Wash. The erosion calculated over 24 years is the largest documented sediment loss attributed to the effect of rapid urban growth. ?? 2007 American Water Resources Association.

Journal of the American Water Resources Associatio↗
USGS2007

Geology of the Yucca Mountain site area, southwestern Nevada

Yucca Mountain in southwestern Nevada is a prominent, irregularly shaped upland formed by a thick apron of Miocene pyroclastic-flow and fallout tephra deposits, with minor lava flows, that was segmented by through-going, large-displacement normal faults into a series of north-trending, eastwardly tilted structural blocks. The principal volcanic-rock units are the Tiva Canyon and Topopah Spring Tuffs of the Paintbrush Group, which consist of volumetrically large eruptive sequences derived from compositionally distinct magma bodies in the nearby southwestern Nevada volcanic field, and are classic examples of a magmatic zonation characterized by an upper crystal-rich (>10% crystal fragments) member, a more voluminous lower crystal-poor (<5% crystal fragments) member, and an intervening thin transition zone. Rocks within the crystal-poor member of the Topopah Spring Tuff, lying some 280 m below the crest of Yucca Mountain, constitute the proposed host rock to be excavated for the storage of high-level radioactive wastes. Separation of the tuffaceous rock formations into subunits that allow for detailed mapping and structural interpretations is based on macroscopic features, most importantly the relative abundance of lithophysae and the degree of welding. The latter feature, varying from nonwelded through partly and moderately welded to densely welded, exerts a strong control on matrix porosities and other rock properties that provide essential criteria for distinguishing hydrogeologic and thermal mechanical units, which are of major interest in evaluating the suitability of Yucca Mountain to host a safe and permanent geologic repository for waste storage. A thick and varied sequence of surficial deposits mantle large parts of the Yucca Mountain site area. Mapping of these deposits and associated soils in exposures and in the walls of trenches excavated across buried faults provides evidence for multiple surface-rupturing events along all of the major faults during Pleistocene and Holocene times; these paleoseismic studies form the basis for evaluating the potential for future earthquakes and fault displacements. Thermoluminescence and U-series analyses were used to date the surficial materials involved in the Quaternary faulting events. The rate of erosional downcutting of bedrock on the ridge crests and hillslopes of Yucca Mountain, being of particular concern with respect to the potential for breaching of the proposed underground storage facility, was studied by using rock varnish cation-ratio and 10 Be and 36 Cl cosmogenic dating methods to determine the length of time bedrock outcrops and hillslope boulder deposits were exposed to cosmic rays, which then served as a basis for calculating long-term erosion rates. The results indicate rates ranging from 0.04 to 0.27 cm/k.y., which represent the maximum downcutting along the summit of Yucca Mountain under all climatic conditions that existed there during most of Quaternary time. Associated studies include the stratigraphy of surficial deposits in Fortymile Wash, the major drainage course in the area, which record a complex history of four to five cut-and-fill cycles within the channel during middle to late Quaternary time. The last 2-4 m of incision probably occurred during the last pluvial climatic period, 22-18 ka, followed by aggradation to the present time. Major faults at Yucca Mountain-from east to west, the Paintbrush Canyon, Bow Ridge, Stagecoach Road, Solitario Canyon, Fatigue Wash, Windy Wash, and Northern and Southern Crater Flat Faults-trend predominantly north, are spaced 1-5 km apart, have bedrock displacements ranging from 125 m to as much as 500 m, and exhibit Quaternary movements of several centimeters to a few meters. Displacements are predominantly down to the west, and bedrock/alluvium contacts commonly are marked by fault-line scarps. The predominant northerly fault trend changes to a more northeasterly trend in adjacent areas south

Nevada↗
USGS2005

Geomorphic control of radionuclide diffusion in desert soils

Diffusion is a standard model for the vertical migration of radionuclides in soil profiles. Here we show that diffusivity values inferred from fallout 137CS profiles in soils on the Fortymile Wash alluvial fan, Nye County, Nevada, have a strong inverse correlation with the age of the geomorphic surface. This result suggests that radionuclide-bound particles are predominantly transported by infiltration rather than by bulk-mixing processes such as wetting/ drying, freeze/thaw, and bioturbation. Our results provide a preliminary basis for using soil-geomorphic mapping, point-based calibration data, and the diffusion model to predict radionuclide trans desert soils within a pedotransfer-function approach. Copyright 2005 by the American Geophysical Union.

Geophysical Research Letters↗
USGS2003

A methodology for probabilistic fault displacement hazard analysis (PFDHA)

We present a methodology for conducting a site-specific probabilistic analysis of fault displacement hazard. Two approaches are outlined. The first relates the occurrence of fault displacement at or near the ground surface to the occurrence of earthquakes in the same manner as is done in a standard probabilistic seismic hazard analysis (PSHA) for ground shaking. The methodology for this approach is taken directly from PSHA methodology with the ground-motion attenuation function replaced by a fault displacement attenuation function. In the second approach, the rate of displacement events and the distribution for fault displacement are derived directly from the characteristics of the faults or geologic features at the site of interest. The methodology for probabilistic fault displacement hazard analysis (PFDHA) was developed for a normal faulting environment and the probability distributions we present may have general application in similar tectonic regions. In addition, the general methodology is applicable to any region and we indicate the type of data needed to apply the methodology elsewhere.

Earthquake Spectra↗
USGS2001

Evaluation of the location and recency of faulting near prospective surface facilities in Midway Valley, Nye County, Nevada

Evaluation of surface faulting that may pose a hazard to prospective surface facilities is an important element of the tectonic studies for the potential Yucca Mountain high-level radioactive waste repository in southwestern Nevada. For this purpose, a program of detailed geologic mapping and trenching was done to obtain surface and near-surface geologic data that are essential for determining the location and recency of faults at a prospective surface-facilities site located east of Exile Hill in Midway Valley, near the eastern base of Yucca Mountain. The dominant tectonic features in the Midway Valley area are the north- to northeast-trending, west-dipping normal faults that bound the Midway Valley structural block-the Bow Ridge fault on the west side of Exile Hill and the Paint-brush Canyon fault on the east side of the valley. Trenching of Quaternary sediments has exposed evidence of displacements, which demonstrate that these block-bounding faults repeatedly ruptured the surface during the middle to late Quaternary. Geologic mapping, subsurface borehole and geophysical data, and the results of trenching activities indicate the presence of north- to northeast-trending faults and northwest-trending faults in Tertiary volcanic rocks beneath alluvial and colluvial sediments near the prospective surface-facilities site. North to northeast-trending faults include the Exile Hill fault along the eastern base of Exile Hill and faults to the east beneath the surficial deposits of Midway Valley. These faults have no geomorphic expression, but two north- to northeast-trending zones of fractures exposed in excavated profiles of middle to late Pleistocene deposits at the prospective surface-facilities site appear to be associated with these faults. Northwest-trending faults include the West Portal and East Portal faults, but no disruption of Quaternary deposits by these faults is evident. The western zone of fractures is associated with the Exile Hill fault. The eastern zone of fractures is within Quaternary alluvial sediments, but no bedrock was encountered in trenches and soil pits in this part of the prospective surface facilities site; thus, the direct association of this zone with one or more bedrock faults is uncertain. No displacement of lithologic contacts and soil horizons could be detected in the fractured Quaternary deposits. The results of these investigations imply the absence of any appreciable late Quaternary faulting activity at the prospective surface-facilities site.

Nevada↗
USGS2000

Geologic and geophysical characterization studies of Yucca Mountain, Nevada, a potential high-level radioactive-waste repository

In recognition of a critical national need for permanent radioactive-waste storage, Yucca Mountain in southwestern Nevada has been investigated by Federal agencies since the 1970's, as a potential geologic disposal site. In 1987, Congress selected Yucca Mountain for an expanded and more detailed site characterization effort. As an integral part of this program, the U.S. Geological Survey began a series of detailed geologic, geophysical, and related investigations designed to characterize the tectonic setting, fault behavior, and seismicity of the Yucca Mountain area. This document presents the results of 13 studies of the tectonic environment of Yucca Mountain, in support of a broad goal to assess the effects of future seismic and fault activity in the area on design, long-term performance, and safe operation of the potential surface and subsurface repository facilities.

Nevada↗
USGS1993

Relict colluvial boulder deposits as paleoclimatic indicators in the Yucca Mountain region, southern Nevada

Early to middle Pleistocene boulder deposits are common features on southern Nevada hillslopes. These darkly varnished, ancient colluvial deposits stand but in stark contrast to the underlying light-colored bedrock of volcanic tuffs, and they serve as minor divides between drainage channels on modern hillslopes. To demonstrate the antiquity of these stable hillslope features, six colluvial boulder deposits from Yucca Mountain, Nye County, Nevada, were dated by cation- ratio dating of rock varnish accreted on boulder surfaces. Estimated minimum ages of these boulder deposits range from 760 to 170 ka. Five additional older deposits on nearby Skull and Little Skull Mountains and Buckboard Mesa yielded cation-ratio minimum-age estimates of 1.38 Ma to 800 ka. An independent cosmogenic chlorine-36 surface exposure date was obtained on one deposit, which confirms an estimated early to middle Quaternary age. These deposits have provided the oldest age estimates for unconsolidated hillslope deposits in the southwestern United States. We suggest that the colluvial boulder deposits were produced during early and middle Pleistocene glacial/pluvial episodes and were stabilized during the transition to drier interglacial climates. By comparison to modern periglacial environments, winter minimum monthly temperatures of -3 to -5 °C were necessary to initiate freeze-thaw conditions of such vigor to physically weather relatively large volumes of large boulders from the upper hillslopes of the Yucca Mountain area. These conditions imply that early and middle Pleistocene glacial winter temperatures were at least 1 to 3 °C colder than existed during the last Pleistocene glacial episode and 7 to 9 °C colder than present. We conclude that at least several early and middle Pleistocene glacial episodes were colder, and perhaps wetter, than glacial episodes of the late Pleistocene in the southern Great Basin. Geomorphic processes necessary to form these colluvial boulder deposits are not active on modern hillslopes in the southern Great Basin. In addition, the lack of young, relatively unvarnished colluvial boulder deposits on these hillslopes suggests that boulder-forming conditions did not exist during the late Pleistocene in this region. Modern semiarid hillslope processes primarily erode colluvium during infrequent high-intensity storms. The preservation of old, thin hillslope deposits and the less-than-2-m incision by hillslope runoff adjacent to these deposits, however, indicate that extremely low denudation rates have occurred on resistant volcanic hillslopes in the southern Great Basin during Quaternary time.

Nevada↗
USGS1990

Uranium-series dating of secondary carbonates near Yucca Mountain, Nevada. Applications to tectonic, paleoclimatic, and paleohydrologic problems

Near-surface accumulations of secondary carbonates are common in the soils and sediments of the Yucca Mountain area. These carbonates contain small amounts of uranium that allow dating by the uranium-series disequilibrium method. Preliminary results from the Yucca Mountain area indicate that the U-series methods can (1) identify multiple episodes of tectonic fracturing, (2) provide a chronologic framework for paleoclimatically significant eolian deposits, and (3) place constraints on the probable source of waters from which the carbonates precipitated.

Conference Paper↗
USGS1986

Upper Pleistocene and Holocene lakes in the An Nafud, Saudi Arabia

Two major lake periods were discovered in the sand sea of An Nafud and the surrounding areas. In Upper Pleistocene large lakes occurred around the dune area and in the interior of the sand sea. Their deposits were formed between 34 000 and 24 000 BP. The lakes were not conformous to the present dune relief. They had an extension of several km2 and a depth of ca. 10 m. Holocene lakes (8 400-5 400 BP) were of minor extension and restricted to the interdune depressions. Lake sediments consist of cemented sand, calcareous crusts and diatomites. Upper Pleistocene lakes were fresh water lakes, the Halocene lakes were mostly swamps depending on rising and falling aquifers in the dunes. Plant remains as pollen and macro rests show that the environmental changes didn't exceed the system of semidesert comparable to the modern plant cover. However, the Upper Pleistocene lake deposits contain some more soudanian elements as the Holocene sediments in the pollen spectra. Climatically the lake formations are interpreted as depending on a stronger influence of the mediterranean cyclones or an interaction of them with monsoonal air masses. ?? 1986 Dr W. Junk Publishers.

Hydrobiologia↗
USGS1982

Preliminary geological investigation of the Bir Hayzan diatomite deposit, Kingdom of Saudi Arabia, with a section on selected physical properties and implications for future geophysical exploration

A 2.2-m-thick lake bed composed entirely of diatomite was found in the southwestern arm of the Nafud sand sea, about 67 km east of Tayma in northwestern Saudi Arabia. Its stratigraphic position above eolian sand and below a large barchanoid dune indicates deposition during an exceptional period of pluvial climate in an otherwise arid sand desert. Radiocarbon-dated carbonate lake beds found in similar stratigraphic settings in other parts of the Nafud suggest that the diatomite was deposited in the late Pleistocene epoch sometime between 32,000 and 20,000 years ago. Diatomite of the same pluvial episode has also been found in the Afar region of Ethiopia. Four samples of the diatomite were analyzed for major chemical components and 32 minor and trace elements. Two of the samples appeared to be representative of the lake bed. These samples contained about 85 percent SiO2, 2.34 percent Fe2O3, 1 4 percent Al2O3, and 8.27 percent ignition loss, with only traces of CaO, P2O5, MgO, Na2O, and TiO2. The high content of silica and low contents of alumina, iron oxide, lime, and other constituents indicate low contamination. Analyses of samples from the two atypical units indicate a small amount of contamination, probably clay or mica, in the basal unit and addition of iron oxide and carbonate by ground water in an isolated green-colored unit. Chemically the Bi'r Hayzan diatomite compares favorably with commercial deposits from other parts of the world. Low bulk densities of 0.64 g/cm3 (30-40 lbs/ft3) and an average porosity of 63 percent for five samples also suggest the deposit is of industrial grade. Further studies are recommended to determine: (1) the size and extent of the deposit and (2) the suitability of the diatomite for commercial applications. As means to these ends, electrical-resistivity surveys following winter rains are suggested to determine both the extent and thickness of the lake bed beneath the overlying sand dunes. A complete species identification of the diatom association and further laboratory testing of physical properties of the diatomite also should be made. Further exploration in the Nafud is recommended to locate other possible diatomite deposits.

Open-File Report↗