Geology Reports⌕ Search

Geology topics

J.J. Daniels

Publications and source records attributed to J.J. Daniels.

7 recordsLinked to original sources
USGS1984

Hole-to-surface resistivity measurements at Gibson Dome (drill hole GD-1) Paradox basin, Utah

Hole-to-surface resistivity measurements were made in a deep drill hole (GD-1), in San Juan County, Utah, which penetrated a sequence of sandstone, shale, and evaporite. These measurements were made as part of a larger investigation to study the suitability of an area centered around the Gibson Dome structure for nuclear waste disposal. The magnitude and direction of the total electric field resulting from a current source placed in a drill hole is calculated from potential difference measurements for a grid of closely-spaced stations. A contour map of these data provides a detailed map of the distribution of the electric field away from the drill hole. Computation of the apparent resistivity from the total electric field helps to interpret the data with respect to the ideal situation of a layered earth. Repeating the surface measurements for different source depths gives an indication of variations in the geoelectric section with depth. The quantitative interpretation of the field data at Gibson Dome was hindered by the pressure of a conductive borehole fluid. However, a qualitative interpretation of the field data indicates the geoelectric section around drill hole GD-1 is not perfectly layered. The geoelectric section appears to dip to the northwest, and contains anomalies in the resistivity distribution that may be representative of localized thickening or folding of the salt layers.

Open-File Report↗
USGS1984

Interpretation of core and well log physical property data from drill hole UPH-3, Stephenson County, Illinois

Laboratory and well log physical property measurements show variations in the mineralogy with depth in UPH-3. Gamma ray values generally decrease with depth in the drill hole, corresponding to a decrease in the felsic mineral components of the granite. Correspondingly, an increase with depth in mafic minerals in the granite is indicated by the magnetic susceptibility, and gamma ray measurements. These mineralogic changes indicated by the geophysical well logs support the hypothesis of fractionation during continuous crystallization of the intrusive penetrated by UPH-3. Two fracture zones, and an altered zone within the granite penetrated by drill hole UPH-3 are defined by the physical property measurements. An abnormally low magnetic susceptibility response in the upper portion of the drill hole can be attributed to alteration of the rock adjacent to the sediments overlying the granite. Fracture zones can be identified from the sonic velocity, neutron, and resistivity measurements. A fracture zone, characterized by low resistivity values and low neutron values, is present in the depth interval from 1150 to 1320 m. Low magnetic susceptibility and high gamma ray values indicate the presence of felsic-micaceous pegmatites within this fracture zone. An unfractured region present from a depth of 1380 m to the bottom of the hole is characterized by an absence of physical property variations. The magnetic susceptibility and gamma ray measurements indicate a change in the amount of mafic minerals at the base of this otherwise homogenous region of the drilled interval. Abrupt changes and repeated patterns of physical properties within the drill hole may represent interruptions in the crystallization process of the melt or they may be indicative of critical temperatures for specific mineral assemblages within the intrusive.

Open-File Report↗
USGS1984

Geophysical well logs for eleven drill holes at the Colorado School of Mines Experimental Mine Site, Idaho Springs, Colorado

The following geophysical well log measurements were made in eleven drill holes above the Colorado School of Mines Experimental Mine at Idaho Springs, Colorado: (1) acoustic velocity (2) resistivity, (3) caliper, (4) gamma-gamma density, (5) neutron-thermal neutron, (6) gamma ray, (7) induced polarization (IP), (8) self potential (SP), and magnetic susceptibility. The density and acoustic velocity logs indicate extensive fracturing in each of the drill holes. Variations in the relative amount of felsic or mafic mineral components in the rocks can be inferred from the magnetic susceptibility and gamma ray well log responses. Zones containing metallic sulfide mineralization are interpreted from the IP well log response.

Open-File Report↗
USGS1983

Hole-to-surface resistivity measurements

Hole-to-surface resistivity measurements over a layered volcanic tuff sequence illustrate procedures for gathering, reducing, and interpreting hole-to-surface resistivity data. The magnitude and direction of the total surface electric field resulting from a buried current source is calculated from orthogonal potential difference measurements for a grid of closely spaced stations. A contour map of these data provides a detailed map of the distribution of the electric field away from the drill hole. Resistivity anomalies can be enhanced by calculating the difference between apparent resistivities calculated from the total surface electric field and apparent resistivities for a layered earth model.Lateral discontinutities in the geoelectric section are verified by repeating the surface field measurments for current sources in several drill holes. A qualitative interpretation of the anomalous bodies within a layered earth can be made by using a three-dimensional (3-D) resistivity model in a homogeneous half-space. The general nature of resistive and conductive bodies causing anomalies away from the source drill holes is determined with the aid of data from several source holes, layered models, and 3-D models.

Geophysics↗
USGS1976

Induced-polarization surveys applied to exploration for roll-front uranium deposits

This open-file report summarizes the oral presentation given at the 45th Annual Meeting of the Society of Exploration Geophysicists. The data analysis given here is brief because of time limitations imposed at the meeting. A more detailed analysis of the data (both geological and geophysical) will be given in subsequent publications. Our oral presentation was preceded by one given by Jeffrey Daniels and James Scott entitled "Borehole Investigations of South Texas Uranium Deposits." Statements made in their presentation that are pertinent to this report are as follows: (1) a Tertiary sandstone is the host for the South Texas uranium occurrence, (2) the roll-front geometry is similar to those found in Wyoming, and (3) the roll-front does not occur at a visually obvious change from reduced to oxidized environments. A careful comparison of the IP (induced polarization) borehole logs and lithology revealed the following general points: (1) the largest IP response logged in the boreholes occurred at the uranium roll-front, and (2) the IP response can be correlated with percentage pyrite and with variations in the percentage and type of clay present. The IP measurements reported here were made with a time-domain Huntec IP receiver. The transmitted wave-form had a two-second on-and-off period. Four windows were measured during the off-time. The second window, M2, which is given here, has a window duration of 130 milliseconds from 50 to 130 milliseconds. IP coupling is inferred not to be a serious problem in the survey data reported here, because the variations in M measurements are the same as those seen for the2 window of longest delay and length. The data presented herein are part of a broad data set which the U.S. Geological Survey has gathered on surface geophysical methods. Other people who have been involved in the data collection, interpretation, and presentation are John Cady, David Campbell, Ralph Corken, Richard Meyer, Louis O'Connor, Tommas Nash, and James Scott.

Open-File Report↗