Geology ReportsSearch

Geology topics

J.C. Hower

Publications and source records attributed to J.C. Hower.

At least 19 recordsLinked to original sources

Mercury capture by selected Bulgarian fly ashes: Influence of coal rank and fly ash carbon pore structure on capture efficiency

Mercury capture by fly ash C was investigated at five lignite- and subbituminous-coal-burning Bulgarian power plants (Republika, Bobov Dol, Maritza East 2, Maritza East 3, and Sliven). Although the C content of the ashes is low, never exceeding 1.6%, the Hg capture on a unit C basis demonstrates that the low-rank-coal-derived fly ash carbons are more efficient in capturing Hg than fly ash carbons from bituminous-fired power plants. While some low-C and low-Hg fly ashes do not reveal any trends of Hg versus C, the 2nd and, in particular, the 3rd electrostatic precipitator (ESP) rows at the Republika power plant do have sufficient fly ash C range and experience flue gas sufficiently cool to capture measurable amounts of Hg. The Republika 3rd ESP row exhibits an increase in Hg with increasing C, as observed in other power plants, for example, in Kentucky power plants burning Appalachian-sourced bituminous coals. Mercury/C decreases with an increase in fly ash C, suggesting that some of the C is isolated from the flue gas stream and does not contribute to Hg capture. Mercury capture increases with an increase in Brunauer-Emmett-Teller (BET) surface area and micropore surface area. The differences in Hg capture between the Bulgarian plants burning low-rank coal and high volatile bituminous-fed Kentucky power plants suggests that the variations in C forms resulting from the combustion of the different ranks also influence the efficiency of Hg capture. ?? 2010 Elsevier Ltd.

Applied Geochemistry

Notes on the origin of inertinite macerals in coals: Funginite associations with cutinite and suberinite

The association of fungus with plant leaves and roots is ubiquitous. While many of these occurrences are considered to be pathogenic, mycorrhizzal fungal associations with roots are essential for plant growth. Despite the common knowledge of such relationships in plant science, with a few exceptions, the fungus/leaf/root/stem association as the macerals funginite, cutinite, and suberinite in coals has not been extensively studied. In this work, examples of funginite associations with cutinite and suberinite are discussed. ?? 2010 Elsevier B.V.

International Journal of Coal Geology

Notes on the origin of inertinite macerals in coal: Evidence for fungal and arthropod transformations of degraded macerals

The role of fungus in the formation of coal macerals, both as a primary contributor in the form of a fungus fossil/maceral funginite, and in their role in degrading wood, thus producing degraded maceral forms, has been established. Fungus, in the course of breaking down the lignin and cellulose in wood, make the wood more digestible for grazers, such as arthropods. In turn, the remnants of the digested wood and anything else eaten but not completely digested are excreted and can be preserved intact; eaten by other fauna with a repeat of the cycle; or colonized by bacteria and/or coprophilous fungi with or without subsequent preservation. Ultimately, the coprolites can be preserved as a form of macrinite.

International Journal of Coal Geology

Study relationship between inorganic and organic coal analysis with gross calorific value by multiple regression and ANFIS

The relationship between maceral content plus mineral matter and gross calorific value (GCV) for a wide range of West Virginia coal samples (from 6518 to 15330 BTU/lb; 15.16 to 35.66 MJ/kg) has been investigated by multivariable regression and adaptive neuro-fuzzy inference system (ANFIS). The stepwise least square mathematical method comparison between liptinite, vitrinite, plus mineral matter as input data sets with measured GCV reported a nonlinear correlation coefficient ( R 2 ) of 0.83. Using the same data set the correlation between the predicted GCV from the ANFIS model and the actual GCV reported a R 2 value of 0.96. It was determined that the GCV-based prediction methods, as used in this article, can provide a reasonable estimation of GCV.

International Journal of Coal Preparation and Util

Did the Middlesboro, Kentucky, bolide impact event influence coal rank?

The Middlesboro Basin, southeastern Kentucky, occurs on the Cumberland Overthrust Sheet and includes a ca. 5.5-km diameter impact structure. The Lower and Middle Pennsylvanian coal-bearing strata are faulted, with some evidence for shock metamorphism. The event post-dated the latest-Pennsylvanian-early-Permian thrusting and was likely prior to late-Mesozoic entrenchment of drainages. The impact of a 0.5-km meteor traveling at ca. 60,000??km/h would release about 1??EJ, the approximate equivalent of the instantaneous combustion of 30??Mt of coal. The coal rank, while increased slightly above the regional level, still is within the upper portion of the high volatile A bituminous rank range. This helps to constrain the depth of burial at the time of the impact. The coal would have had to have been at a depth of a few kilometers to have avoided a more substantial rank increase. In addition, it is possible that some of the coal rank increase might be attributable to movements along the cross-cutting Rocky Face fault, unrelated to the impact. ?? 2009 Elsevier B.V. All rights reserved.

International Journal of Coal Geology

Notes on the origin of inertinite macerals in coals: Observations on the importance of fungi in the origin of macrinite

Macrinite is a, generally, rare inertinite maceral, often incorporating remnants and fragments of other macerals, including vitrinite, liptinite, and other inertinite. The associated inertinites include multiple forms of funginite. Funginite is also commonly found in association with vitrinite of slightly elevated reflectance and with degraded varieties of vitrinite. Together with the highly degraded macrinite, the latter two associations are here inferred to be part of a continuum of fungal and microbial degradation of peat. In any case, the origin of some macrinite is potentially distinct from that of inertinite generated by fire. ?? 2009 Elsevier B.V. All rights reserved.

International Journal of Coal Geology

Tales from a distant swamp: Petrological and paleobotanical clues for the origin of the sand coal lithotype (Mississippian, Valley Fields, Virginia)

Tournasian (Mississippian) Price Formation semianthracites (Rmax = 2.40%) in the Valley Fields of southwestern Virginia contain a lithotype described in an early-20th-century report as a "sand" coal. The Center for Applied Energy Research inherited a collection of coals containing sand coal specimens, making it possible to study the lithotype from the long-closed mines. The sand coal consists of rounded quartz sand and maceral assemblages (secretinite, corpogelinite, and rounded collotelinite) along with banded collotelinite, vitrodetrinite, and inertodetrinite assemblages. The association of rounded macerals and similar-size quartz grains suggests transport. Oxidation rims surrounding the rounded collotelinite provides further evidence for transport. Due to the semianthracite rank, palynology could not be performed. Stratigraphic evidence indicates that the Lepidodendropsis flora would have been the dominant mire vegetation. Pteridosperms in this assemblage could have contributed resin rodlets, subsequently metamorphosed to collogelinite or secretinite. While a resin rodlet origin is an intriguing possibility for the origin of the rounded macerals (at least some of the rounded maceral, the rounded collotelinite clearly has a different origin), we cannot definitively prove this origin. ?? 2008 Elsevier B.V. All rights reserved.

International Journal of Coal Geology

The investigation of chemical structure of coal macerals via transmitted-light FT-IR microscopy by X. Sun

A recent paper by Sun [X. Sun, Spectrochim. Acta A 62 (1-3) (2005) 557] attempts to characterize a variety of liptinite, termed "barkinite", from Chinese Permian coals. The component identified does not appear to fundamentally differ from previously-described liptinite macerals included in the International Committee for Coal and Organic Petrology's system of maceral nomenclature. Further, chemical comparisons made with macerals from coals of different rank and age are flawed because the author did not account for changes in chemistry with rank or for the chemical changes associated with botanical changes through geologic time. The author has not satisfactorily proved his hypothesis that the component differs morphologically or chemically from known liptinite-group macerals. ?? 2006 Elsevier B.V. All rights reserved.

Spectrochimica Acta - Part A: Molecular and Biomol

Petrography, palynology, and paleoecology of the Lower Pennsylvanian Bon Air coal, Franklin County, Cumberland Plateau, southeast Tennessee

Stratigraphy, palynology, petrography, and geochemistry of the Bon Air coal from the Armfield, Dotson, Rutledge, and Shakerag mine sites of Franklin County, Tennessee suggest that Bon Air seams at all sites were small (??? 1.0 mile, 1.6 km), spatially distinct paleomires that evolved from planar to domed within the fluviodeltaic Lower Pennsylvanian Raccoon Mountain Formation. Of observed palynoflora, 88-97% are from lycopsids prevalent in the Westphalian. Densosporites palynomorphs of small lycopsids (e.g., Omphalophloios) dominate at the shale-hosted Armfield site, while Lycospora palynoflora of large arboreous lycopsids (especially Lepidodendron, with lesser Lepidophloios harcourtii and Lepidophloios hallii) dominate where intercalated siltstone/sandstone/shale hosts the coal (all other sites). Palynoflora of other lycopsids (Sigillaria and Paralycopodites), tree ferns, seed ferns, small ferns, calamites, and cordaites are generally minor. Genera of clastic-associated Paralycopodites are most common in Shakerag's coal (??? 10%), yet quite rare in Rutledge or Dotson coals. Overall, the palynomorph assemblages suggest that the Bon Air paleomires were forest swamps, and Early Pennsylvanian in age (Westphalian A, Langsettian). Dominant macerals at all sites are vitrinites, with fine collodetrinite (from strongly decomposed plant debris) more common than coarser collotelinite (from well-preserved plant fragments), and with lesser inertinites (fusinite and semifusinite) and liptinites (dominantly sporinite). Shakerag's coal has greatest abundance (mineral-matter-free) of collotelinite (up to 47%) and total vitrinite (74-79%) of any sites, but lowest liptinite (12-14.5%) and inertinite (7-11%). The Dotson and Rutledge seams contain moderate liptinite (21-23%) and highest inertinite (36-37%), lowest vitrinite (??? 41%), and lowest collotelinite (13-15%). Armfield's seam has relatively high liptinite (26-28%) and vitrinite (56.5-62%), but rather low inertinite (12-15%). Moderately high ash (11.0-20.0%) and low to moderate sulfur (1.24% avg.) are typical, but ash may locally be up to 38% and sulfur up to 2.9%. Volatile matter (32.1-41.3%), calorific value (33.3-34.9 MJ/kg MAF), moisture (2.2-3.4%), and vitrinite reflectance (0.70-0.84% Rmax; 0.64-0.79% Rrandom) place the Bon Air's rank as high-volatile-A bituminous (hvAb). The Armfield coal was probably a channel-distal paleomire, perhaps an oxbow lake or floodplain depression, which domed and then subsided back to planarity prior to burial. Features of its basal and uppermost benches suggest low-lying, often-flooded (but periodically dry) mires marked by fluvial influxes and diverse lycopsid growth. These include variable inertinite, common palynoflora of both small lycopsids (Omphalophloios-like) and large arboreous ones (Lepidophloios and Lepidodendron), minor but significant palynoflora of subaerial levee or levee/mire transition species (especially Paralycopodites), moderate to high ash, variable sulfur, and elevated levels of commonly fluvial trace elements (e.g., Al, Cr, REEs, Rb, Sr, Th, V, Y, and Zr). These benches also contain high total vitrinite, high collotelinite/collodetrinite ratios, and clays with moderate to low kaolinite/quartz ratios, all consistent with the near-neutral pH and limited peat degradation that typify such planar mires. By contrast, middle benches at Armfield reflect mires domed above the land surface, less-often flooded, less-preservational, and of lower pH: coals have lower ash, vitrinite, and collotelinite, less palynoflora of both large arboreous lycopsids and Paralycopodites, and high proportions of kaolinite, liptinite, and Densosporites. Similar data at Shakerag suggest that its mire also grew from planar to domed. However, more abundant Paralycopodites, a kaolinite-poor but quartz-and-illite-rich underclay, benches alternately ash-rich and ash-poor, and an upper bench truncated by channel sandstone, suggest that it was channel-proximal and pron

International Journal of Coal Geology

Determination of coalbed methane potential and gas adsorption capacity in Western Kentucky coals

The Illinois Basin has not been developed for Coalbed Methane (CBM) production. It is imperative to determine both gas content and other parameters for the Kentucky portion of the Illinois Basin if exploration is to progress and production is to occur in this area. This research is part of a larger project being conducted by the Kentucky Geological Survey to evaluate the CBM production of Pennsylvanian-age western Kentucky coals in Ohio, Webster, and Union counties using methane adsorption isotherms, direct gas desorption measurements, and chemical analyses of coal and gas. This research will investigate relationships between CBM potential and petrographic, surface area, pore size, and gas adsorption isotherm analyses of the coals. Maceral and reflectance analyses are being conducted at the Center for Applied Energy Research. At the Indiana Geological Survey, the surface area and pore size of the coals will be analyzed using a Micrometrics ASAP 2020, and the CO2 isotherm analyses will be conducted using a volumetric adsorption apparatus in a water temperature bath. The aforementioned analyses will be used to determine site specific correlations for the Kentucky part of the Illinois Basin. The data collected will be compared with previous work in the Illinois Basin and will be correlated with data and structural features in the basin. Gas composition and carbon and hydrogen isotopic data suggest mostly thermogenic origin of coalbed gas in coals from Webster and Union Counties, Kentucky, in contrast to the dominantly biogenic character of coalbed gas in Ohio County, Kentucky.

Conference Paper

An approach toward a combined scheme for the petrographic classification of fly ash: Revision and clarification

Hower and Mastalerz's classification scheme for fly ash is modified to make more widely acceptable. First, proper consideration is given to the potential role of anthracite in the development of isotropic and anisotropic chars. Second, the role of low-reflectance inertinite in producing vesicular chars is noted. It is shown that noncoal chars in the fuel can potentially produce chars that have the potential to stretch the limits of the classification. With care, it is possible to classify certain biomass chars as being distinct from coal-derived chars.

Energy and Fuels

Geochemistry, petrology, and palynology of the Pond Creek coal bed, northern Pike and southern Martin counties, Kentucky

The geochemistry, petrology, and palynology of the Duckmantian-age Pond Creek coal bed were investigated in northern Pike and southern Martin counties, eastern Kentucky. The coal bed exhibits significant vertical variation in the investigated geochemical parameters, with many diagenetic overprints of the original geochemistry. Included in the range of geochemical signatures are the presence of elements, particularly TiO2 and Zr, suggesting the detrital influences at the time of deposition of a low-vitrinite durain; a high CaO zone with elevated B/Be, both suggesting marine influence, in a lithotype in the middle of the coal bed; and the postdepositional emplacement of pyrite in the uppermost lithotype. Individual lithotypes, each representing distinct depositional environments, all complicated to some degree by diagentic overprints, comprise the complex history of the coal bed. ?? 2004 Elsevier B.V. All rights reserved.

International Journal of Coal Geology

Mercury content of the Springfield coal, Indiana and Kentucky

With pending regulation of mercury emissions in United States power plants, its control at every step of the combustion process is important. An understanding of the amount of mercury in coal at the mine is the first step in this process. The Springfield coal (Middle Pennsylvanian) is one of the most important coal resources in the Illinois Basin. In Indiana and western Kentucky, Hg contents range from 0.02 to 0.55 ppm. The variation within small areas is comparable to the variation on a basin basis. Considerable variation also exists within the coal column, ranging from 0.04 to 0.224 ppm at one Kentucky site. Larger variations likely exist, since that site does not represent the highest whole-seam Hg nor was the collection of samples done with optimization of trace element variations in mind. Estimates of Hg capture by currently installed pollution control equipment range from 9-53% capture by cold-side electrostatic precipitators (ESP) and 47-81% Hg capture for ESP + flue-gas desulfurization (FGD). The high Cl content of many Illinois basin coals and the installation of Selective Catalytic Reduction of NOx enhances the oxidation of Hg species, improving the ability of ESPs and FGDs to capture Hg. ?? 2005 Elsevier B.V. All rights reserved.

International Journal of Coal Geology

Subtle structural influences on coal thickness and distribution: Examples from the Lower Broas-Stockton coal (Middle Pennsylvanian), Eastern Kentucky Coal Field, USA

The Lower Broas-Stockton coal is a heavily mined coal of the Central Appalachian Basin. Coal thickness, distribution, composition, and stratigraphic position were compared with basement structure, gas and oil field trends, and sequence strat- igraphic and paleoclimate interpretations to better understand the geology of the Stockton coal bed in eastern Kentucky. The thickest coal occurs south of the Warfield structural trend and east of the Paint Creek Uplift, two basement-related structures. Along the Warfield trend, coal beds in the underlying Peach Orchard coal zone locally merge with the Stockton coal to form a seam more than 3 m thick. Other areas of thick coal occur in elongate trends. Two pairs of elongate, conjugate trends in Stockton coal thickness are interpreted as regional paleofractures that influenced paleotopography and groundwater during peat accumulation. Compositional group analyses indicate that the Stockton peat infilled depressions in the paleotopography as a topogenous to soligenous mire codominated by tree ferns and lycopsid trees. Flooding from adjacent paleochannels is indicated by partings and seam splits along the margins of the mineable coal body. One or more increments of low-vitrinite coal, dominated by tree ferns and shrubby, Densosporites-producing lycopsids occur at all sample sites. Similar assemblages have been previously used to identify ombrogenous, domed mire origins for Early and Middle Pennsylvanian coals in which ash yields were less than 10%. It is difficult, however, to reconcile ombrogenous conditions with the partings in the Stockton coal in this area. Low-ash, low-vitrinite increments may have been formed in topogenous to soligenous mires with periodic drying or water-table fluctuations, rather than widespread doming. This is consistent with interpretations of increasingly seasonal paleoclimates in the late Middle and Late Pennsylvanian and fracture-influenced groundwater conditions. ??2005 Geological Society of America.

Special Paper of the Geological Society of America

From in-situ coal to fly ash: A study of coal mines and power plants from Indiana

This paper presents data on the properties of coal and fly ash from two coal mines and two power plants that burn single-source coal from two mines in Indiana. One mine is in the low-sulfur (<1%) Danville Coal Member of the Dugger Formation (Pennsylvanian) and the other mines the high-sulfur (>5%) Springfield Coal Member of the Petersburg Formation (Pennsylvanian). Both seams have comparable ash contents (???11%). Coals sampled at the mines (both raw and washed fractions) were analyzed for proximate/ultimate/sulfur forms/heating value, major oxides, trace elements and petrographic composition. The properties of fly ash from these coals reflect the properties of the feed coal, as well as local combustion and post-combustion conditions. Sulfur and spinel content, and As, Pb and Zn concentrations of the fly ash are the parameters that most closely reflect the properties of the source coal. ?? 2004 Elsevier B.V. All rights reserved.

International Journal of Coal Geology

Chemical and isotopic properties of kukersites from Iowa and Estonia

Kukersite samples from Estonia and Iowa were analyzed for elemental composition, functional group distribution, and carbon and hydrogen stable isotope ratios. The elemental and hydrogen isotope values, together with other analytical data, suggest a higher thermal maturity for the Iowa kukersite. The wide carbon isotopic range of 9.3??? among kukersites, with unusually negative ??13C values reaching -33.2???, indicates isotopically variable carbon sources for production of biomass, and thus major paleoceanographic differences between the environments supporting biosynthesis. ?? 2003 Elsevier Ltd. All rights reserved.

Organic Geochemistry

Multiple-bench architecture and interpretations of original mire phases - Examples from the Middle Pennyslvanian of the Central Appalachian Basin, USA

Coal seams often exhibit lateral and vertical variability in composition. When sampled as a whole seam this variability is masked. But if a seam is subdivided into correlateable components, this variability can be tested and better understood. Herein, an architectural approach is used to divide seams into intra-seam components. Clastic splits and mineral partings, as well as persistent fusain and durain layers, can be used as intra-seam bounding units to subdivide a seam into subdivisions called benches. Regional examination of Lower and Middle Pennsylvanian-age coal seams shows that many contain laterally persistent bounding surfaces that can be used to define multiple benches of coal within each seam. Inter-bench analyses from some of the most extensively mined seams in the central Appalachian Basin show that individual benches often have different spatial and quality trends. Hence, some component of whole-seam variability is a function of changes in the relative contribution of these different benches to the seam as a whole. Many coal benches also exhibit intra-bench variation in coal parameters. Intra-bench variation can be analyzed in terms of parameters such as sulfur content and ash yield in order to address changes in coal quality for regional resource evaluation. Intra-bench variation can also be analyzed in terms of a combination of palynologic, petrographic, and geochemical parameters, termed compositional groups, in order to better understand the development of the original mire systems. Compositional groups are defined by ranges of multiple criteria, which are inferred to owe their origin to the mire type in which they formed. Vertical changes in compositional groups within coal benches can be used to infer paleo-edaphic conditions during peat accumulation. If seam thickness is a product of bench configuration, and trends in compositional groups occur in benches, then trends in quality can be marginally predicted based upon seam thickness and inferred bench architecture. Additionally, changes in inter-bench and intra-bench thickness and compositional profiles can be used to infer original depositional controls, such as paleotopography, syndepositional structural movement, and syndepositional clastic influx for more accurate reserve estimates. ?? 2002 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology