Geology Reports⌕ Search

Geology topics

J.B. Martin

Publications and source records attributed to J.B. Martin.

20 records · Page 2Linked to original sources

Hydrologic monitoring of a deep-well waste-injection system near Pensacola, Florida, March 1970 - March 1977

This report presents hydraulic and chemical data collected at a deep-well waste-injection system near Pensacola, Florida. Since injection began in July 1963, about 13.3 billion gallons of industrial acidic waste containing nitric acid, inorganic salts and numerous organic compounds have been injected into a saline-water-filled limestone aquifer. Wellhead pressure at two injection wells averaged 180 pounds per square inch in March 1977 and the hydraulic pressure gradient was 0.53 pound per square inch per foot of depth to the top of the injection zone. Increases in pressure since 1970 at two wells used to monitor the injection zone at sites located 1.9 miles north and 1.5 miles south of the injection site have been about 22 and 29 pounds per square inch. The pressure in a shallow monitor well, penetrating the first permeable zone above the 220-foot-thick confining bed, declined about 4 pounds per square inch. No changes were detected in the chemical character of water from the shallow monitor well and the north monitor well, but since late 1973, concentrations of bicarbonate and dissolved organic carbon in water from the south monitor well have increased. (Woodard-USGS)

Water-Resources Investigations Report↗

Hydrologic monitoring of a waste-injection well near Milton, Florida, June 1975 - December 1976

This report presents the hydraulic and chemical data collected from June 1, 1975 to December 31, 1976 through a monitoring program at a deep-well waste-injection system at the American Cyanamid Company's plant near Milton, Florida. The injection system consists of a primary injection well, a standby injection well, and two deep monitor wells all completed open hole in the lower limestone of the Floridan aquifer and one shallow-monitor well completed in the upper limestone of the Floridan aquifer. Two of the monitor wells and the standby injection well are used to observe hydraulic and geochemical effects of waste injection in the injection zone at locations 1,025 feet southwest, 1,560 feet south, and 1.55 miles northeast of the primary injection well. The shallow-monitor well, used to observe any effects in the first permeable zone above the 200-foot-thick confining bed, is 28 feet north of the primary injection well.

Florida↗