Geology topics

J. L. Belli

Publications and source records attributed to J. L. Belli.

8 recordsLinked to original sources

USGS1982

Geohydrology of the valley-fill aquifer in the Elmira area, Chemung County, New York

This report is the third in a series of 11 map sets decpicting hydrogeologic conditions in selected upstate New York aquifers. Geohydrologic data are compiled on seven maps at 1:24,000 scale. Together the maps provide a comprehensive overview of a major valley-fill aquifer in western Chemung County. Included are maps of surficial geology, geologic sections, soil-zone permeability, water-table altitude, aquifer thickness, estimated well yield, and land use. The maps are designed to enable the State to make decisions on waste-disposal plans that could adversely affect the aquifer and community water systems. (USGS)

Open-File Report↗

USGS1982

Geohydrology of the valley-fill aquifer in the South Fallsburgh-Woodbourne area, Sullivan County, New York

This report is the ninth in a series of map sets depicting geohydrologic conditions in selected aquifers in upstate New York. Geohydrologic data are compiled on six maps at 1:24,000 scale. Together the maps provide a comprehensive overview of a major valley-fill aquifer in southeastern Sullivan County. The maps include surficial geology, geologic sections, aquifer thickness, water-infiltration potential of soil zone, potentiometric surface elevations, well yields, and land use. The valley-fill deposits consist of alluvial silt and sand, glacial outwash (sand and gravel), ice-contact sand and gravel, till, and lacustrine silt and clay. The sand and gravel beds have relatively high permeabilities whereas the till, silt, and clay deposits have relatively low permeabilities. Water-table conditions prevail in unconfined sand and gravel whereas artesian conditions prevail within sand and gravel confined by silty deposits. The aquifer is recharged throughout, where the land surface is most permeable and is greatest along the margin of the valley, where runoff from the hillsides is concentrated. The use of land overlying the aquifer is predominantly commercial, agricultural, and residential with lesser industrial uses. (USGS)

New York↗

USGS1982

Geohydrology of the valley-fill aquifer in the Jamestown area, Chautauqua County, New York

This report is the sixth in a series of 11 map sets depicting geohydrologic conditions in selected aquifers in upstate New York. Geohydrologic data are compiled on six maps at 1:24,000 scale. Together, the maps provide a comprehensive overview of a major valley-fill aquifer in southeastern Chautauqua County. The maps include surficial geology, geologic sections, water-infiltration potential of soil zone, aquifer thickness, potentiometric-surface elevations and land use. The valley-fill deposits consist of alluvial silt and sand, glacial-outwash (sand and gravel), ice-contact sand and gravel, till, and lacustrine silt and clay. The sand and gravel beds have relatively high permeabilities whereas the till, silt and clay deposits have relatively low permeabilities. Water-table conditions prevail in u nconfined sand and gravel beds along the valley margin. Artesian conditions prevail in confined sand and gravel buried under silt and clay in the middle of the valley. Recharge occurs mainly along the margin of the valley, where the land surface is highly permeable and runoff from the hillsides is concentrated. The use of land overlying the aquifer is predominantly agricultural and residential with lesser amounts of commercial and industrial uses. (USGS)

New York↗

USGS1982

Geohydrology of the valley-fill aquifer in the Ramapo and Mahwah rivers area, Rockland County, New York

This report is the eighth in a series of 11 map sets depicting geohydrologic conditions in selected aquifers in upstate New York. Geohydrologic data are compiled on six maps at 1:24,000 scale. Together, the maps provide a comprehensive overview of a major valley-fill aquifer in southeastern Rockland County. The maps include surficial geology, geologic sections, water-infiltration potential of soil zone, aquifer thickness, water-table elevations, well yields, and land use. The valley-fill deposits consists of alluvial silt and sand, glacial outwash (sand and gravel), ice-contact sand and gravel, till, and lacustrine silt and clay. The sand and gravel beds have relatively high permeabilities, whereas the till, silt, and clay deposits have relatively low permeabilities. Water-table conditions prevail in unconfined sand and gravel along the Ramapo River valley and much of the Mahwah River valley. Artesian conditions prevail in confined sand and gravel buried under silt and clay and till in parts of the Mahway valley. The aquifer is recharged throughout, where the land surface is most permeable and is greatest along the margin of the valley, where runoff from the hillsides is concentrated. The use of land overlying the aquifer is predominantly commercial, agricultural and residential, with lesser industrial uses. (USGS)

Open-File Report↗

USGS1982

Geohydrology of the valley-fill aquifer in the Endicott-Johnson City area, Broome County, New York

This report is the tenth in a series of 11 map sets depicting geohydrologic conditions in selected aquifers in upstate New York. Geohydrologic data are compiled on five maps at 1:24,000 scale. Together, the maps provide a comprehensive overview of a major valley-fill aquifer in southwestern Broome County. The maps include surficial geology, geologic sections, aquifer thickness, water-infiltration potential of soil zone, potentiometric-surface altitude, and land use. The valley-fill deposits consist of alluvial silt and sand, glacial outwash (sand and gravel), ice-contact sand and gravel, till, and lacustrine silt and clay. The sand and gravel beds have relatively high permeabilities whereas the till, silt, and clay deposits have relatively low permeabilities. Water-table conditions are found in unconfined sand and gravel, whereas artesian conditions prevail within sand and gravel confined by silty deposits. Recharge occurs over the entire surface of the aquifer, due to permeable land-surface conditions, but is greatest along the margin of the valley, where runoff from the hillsides is concentrated, and near streams. The use of land overlying the aquifer is predominantly commercial and residential with lesser amounts of agricultural and industrial uses. (USGS)

New York↗

USGS1982

Geohydrology of the preglacial Genesee Valley, Monroe County, New York

This report is last in a series of 11 map sets depicting geohydrologic conditions in selected aquifers in upstate New York. Geohydrologic data are compiled on five maps at 1:24,000 scale. Together the maps provide a comprehensive overview of a buried glacio-fluvial aquifer in Monroe County. The maps include surficial geology, geologic sections, bedrock topography, water-infiltration potential of soil zone, potentiometric surface altitude, and land use. The buried-valley deposits consist of ice-contact sand and gravel, till, and glaciolacustrine sand, silt, and clay. The sand and gravel have relatively high permeabilities whereas the till, silt, and clay deposits have relatively low permeabilities. Water-table conditions prevail in unconfined sand and gravel, whereas artesian conditions prevail in the northern part of the system within sand and gravel confined by silty deposits. Recharge occurs principally over the southern part of the aquifer, due to permeable land-surface conditions. Ground-water movement is towards the Irondequoit Bay and Lake Ontario, where discharge occurs. Several communities have wells capable of producing several hundred gallons per minute from the aquifer. The use of land overlying the aquifer is predominantly residential with lesser amounts of industrial uses. (USGS)

New York↗

USGS1982

Geohydrology of the valley-fill aquifer in the Sprout and Fishkill creeks area, Dutchess County, New York

This report is the fifth in a series of 11 map sets depicting geohydrologic conditions in selected aquifers in upstate New York. Geohydrologic data are compiled on six maps at 1:24,000 scale. Together the maps provide a comprehensive overview of a major valley-fill aquifer in southwestern Dutchess County and a small part of Putnan County. The maps include surficial geology, geologic sections, water-infiltration potential of soil zone, aquifer thickness, water-table elevations and land use. The valley-fill deposits consist of alluvial silt and sand, glacial-outwash (sand and gravel), ice-contact sand and gravel, till, and lacustrine silt and clay. The sand and gravel have relatively high permeabilities whereas the till, silt and clay deposits have relatively low permeabilities. Saturated layers of sand and gravel underlie confining layers of silt and clay, and also underlie confining till. The water-infiltration potential of the soil zone of the valley-fill varies widely. Aquifer thickness data is sparse, especially data on the lower confined aquifer layers. Water-table elevations within the surface aquifer are gently sloping, directing ground-water flow towards streams into which discharge occurs. The use of land overlying the aquifer is predominantly agricultural and residential, with lesser amounts of commercial and industrial uses. (USGS)

Open-File Report↗

USGS1982

Geohydrology of the valley-fill aquifer in the Corning area, Steuben County, New York

This report is the seventh in a series of 11 map sets depicting geohydrologic conditions in selected aquifers in upstate New York. Geohydrologic data are compiled on six maps at 1:24,000 scale. Together, the maps provide a comprehensive overview of a major valley-fill aquifer in southeastern Steuben County. The maps include surficial geology, geologic sections, water-infiltration potential of soil zone, aquifer thickness, potentiometric-surface elevations, and land use. The valley-fill deposits consist of alluvial silt, sand, and gravel, glacial-outwash (sand and gravel), till, and lacustrine silt and clay. The sand and gravel beds have relatively high permeabilities, whereas the till and silt deposits have relatively low permeabilities. Water-table conditions prevail in unconfined sand and gravel along the valley margin. Artesian conditions are found locally in sand and gravel confined under silt and clay in the middle of the valley. Recharge occurs nearly everywhere on the valley floor, but principally along the margin of the valley, where highly permeable land surface conditions exist, and runoff from the hillsides is concentrated. The use of land overlying the aquifer is a mixture of residential, commercial, agricultural, and industrial uses.

New York↗