Geology topics

J. Kim

Publications and source records attributed to J. Kim.

9 recordsLinked to original sources

USGS2024

Advanced quantitative precipitation information: Improving monitoring and forecasts of precipitation, streamflow, and coastal flooding in the San Francisco Bay area

Advanced Quantitative Precipitation Information (AQPI) is a synergistic project that combines observations and models to improve monitoring and forecasts of precipitation, streamflow, and coastal flooding in the San Francisco Bay Area. As an experimental system, AQPI leverages more than a decade of research, innovation, and implementation of a statewide, state-of-the-art network of observations, and development of the next generation of weather and coastal forecast models. AQPI was developed as a prototype in response to requests from the water management community for improved information on precipitation, riverine, and coastal conditions to inform their decision-making processes. Observation of precipitation in the complex Bay Area landscape of California’s coastal mountain ranges is known to be a challenging problem. But, with new advanced radar network techniques, AQPI is helping fill an important observational gap for this highly populated and vulnerable metropolitan area. The prototype AQPI system consists of improved weather radar data for precipitation estimation; additional surface measurements of precipitation, streamflow, and soil moisture; and a suite of integrated forecast modeling systems to improve situational awareness about current and future water conditions from sky to sea. Together these tools will help improve emergency preparedness and public response to prevent loss of life and destruction of property during extreme storms accompanied by heavy precipitation and high coastal water levels—especially high-moisture laden atmospheric rivers. The Bay Area AQPI system could potentially be replicated in other urban regions in California, the United States, and worldwide.

California↗

USGS2023

CONUS404: The NCAR-USGS 4-km long-term regional hydroclimate reanalysis over the CONUS

A unique, high-resolution, hydroclimate reanalysis, 40-plus-year (October 1979–September 2021), 4 km (named as CONUS404), has been created using the Weather Research and Forecasting Model by dynamically downscaling of the fifth-generation European Centre for Medium-Range Weather Forecasts (ECMWF) atmospheric reanalysis of the global climate dataset (ERA5) over the conterminous United States. The paper describes the approach for generating the dataset, provides an initial evaluation, including biases, and indicates how interested users can access the data. The motivation for creating this National Center for Atmospheric Research (NCAR)–U.S. Geological Survey (USGS) collaborative dataset is to provide research and end-user communities with a high-resolution, self-consistent, long-term, continental-scale hydroclimate dataset appropriate for forcing hydrological models and conducting hydroclimate scientific analyses over the conterminous United States. The data are archived and accessible on the USGS Black Pearl tape system and on the NCAR supercomputer Campaign storage system.

Continental United States↗

USGS2020

Twelve-year dynamics and rainfall thresholds for alternating creep and rapid movement of the Hooskanaden landslide from integrating InSAR, pixel offset tracking, and borehole and hydrological measurements

The Hooskanaden landslide is a large (~600 m wide × 1,300 m long), deep (~30 – 45 m) slide located in southwestern Oregon. Since 1958, it has had five moderate/major movements that catastrophically damaged the intersecting U.S. Highway 101, along with persistent slow wet‐season movements and a long‐term accelerating trend due to coastal erosion. Multiple remote sensing approaches, borehole measurements, and hydrological observations have been integrated to interpret the motion behaviors of the slide. Pixel offset tracking of both Sentinel‐1 and Sentinel‐2 images was carried out to reconstruct the 3‐D displacement field of the 2019 major event, and the results agree well with field measurements. A 12‐year displacement history of the landslide from 2007 to 2019 has been retrieved by incorporating offsets from Light Detection and Ranging (LiDAR) digital elevation model (DEM) gradients and Interferometric Synthetic Aperture Radar (InSAR) processing of ALOS and Sentinel‐1 images. Comparisons with daily/hourly ground precipitation reveal that the motion dynamics are predominantly controlled by intensity and temporal pattern of rainfall. A new empirical threefold rainfall threshold was therefore proposed to forecast the dates for the moderate/major movements. This threshold relies upon antecedent water‐year and previous 3‐day and daily precipitation and was able to represent observed movement periods well. Adaptation of our threshold methodology could prove useful for other large, deep landslides for which temporal forecasting has long been generally intractable. The averaged characteristic hydraulic conductivity and diffusivity were estimated as 6.6 × 10 −6 m/s and 6.6 × 10 −4 m 2 /s, respectively, based on the time lags between rainfall pulses and slide accelerations. Hydrologic modeling using these parameters helps to explain the ability of the new rainfall threshold.

Oregon↗

USGS2019

Compressibility and particle crushing of Krishna-Godavari Basin sediments from offshore India: Implications for gas production from deep-water gas hydrate deposits

Depressurizing a gas hydrate reservoir to extract methane induces high effective stresses that act to compress the reservoir. Predicting whether a gas hydrate reservoir is viable as an energy resource requires enhanced understanding of the reservoir’s compressibility and susceptibility to particle crushing in response to elevated effective stress because of their impact on the long-term permeability and geomechanical stability of the reservoir. This study investigates physical and geomechanical properties of natural sediments with and without tetrahydrofuran (THF) hydrate subjected to high effective stresses of up to 25 MPa. Experimental results show the stiffness of hydrate-free sediments is mainly governed by the stress state and history, while the stiffness of hydrate-bearing sediments reflects both the grain supporting nature of the interconnected hydrate phase and stress effects. The Poisson’s ratio of hydrate-bearing sediments at low stresses is dominated by the Poisson’s ratio of the interconnected pore-filling phases, and dominated at high stresses by elastic properties of both the skeleton and pore-filling phases. The stress-void ratio responses of hydrate-bearing sediments above the pre-consolidation stress yields a slightly convex-downward trend, suggesting compressibility is influenced by the stiffness of THF hydrate and sediment grains rather than only by void space reduction. The shape of the compression index (Cc) trend may be attributed to an increasing effective gas hydrate saturation as the total pore volume decreases under loading. The results also show that the presence of THF hydrate in sediments can mitigate particle crushing by suppressing particle rearrangement and supporting a portion of the load that would otherwise have to be carried by the sediment. Therefore, the loss of hydrate crystals during gas production may exacerbate sand crushing.

Marine and Petroleum Geology↗

USGS2019

Permeability anisotropy and relative permeability in sediments from the National Gas Hydrate Program Expedition 02, offshore India

Gas and water permeability through hydrate-bearing sediments essentially governs the economic feasibility of gas production from gas hydrate deposits. Characterizing a reservoir’s permeability can be difficult because even collocated permeability measurements can vary by 4-5 orders of magnitude, due partly to differences between how various testing methods inherently measure permeability in different directions and at different scales. This study uses a customized flow anisotropy cell to investigate geomechanical and hydrological properties of hydrate-bearing sediments focusing on permeability anisotropy (i.e., horizontal, kh, to vertical, kv, permeability ratio) and relative permeability. Two cores recovered during India’s National Gas Hydrate Program Expedition 02 (NGHP-02) are tested in this study. Near in situ effective vertical stress, ~ 2MPa, the permeability anisotropy is approximately kh/kv = 1.86 for the “seal core” (from a fine-grained non-reservoir overburden sedimentary section) and kh/kv = 4.24 for the gas hydrate reservoir score with tetrahydrofuran (THF) hydrate saturation Sh = 0.8. Permeability anisotropy increases exponentially with effective vertical stress, as described by kh/kv = α(σv/MPa)^β, with α = 1.6, β = 0.22 for seal sediment and α = 3, β = 0.5 for THF hydrate-bearing sediment. Results imply the measured permeability from permeameter tests with vertical flow may underestimate the reservoir’s flow performance, which is mainly horizontal (radial) toward a vertical well. Hydrates in sediment increase the gas-entry pressure and residual water saturation, but decrease the water retention curve’s shape factor (m), resulting in a steeper curve. Distributions of available pore space sizes for flow in sediment with and without THF hydrate (Sh = 0.8) follow a log-normal distribution. Hydrate formation decreases the apparent mean pore size from ~10 µm to ~2 µm, without evidently changing the pore size distribution's standard deviation. Gas hydrate dissociation increases effective permeability and relative permeability to gas.

Journal of Marine and Petroleum Geology↗

USGS2009

Biomineralization associated with microbial reduction of Fe 3+ and oxidation of Fe 2+ in solid minerals

Iron-reducing and oxidizing microorganisms gain energy through reduction or oxidation of iron, and by doing so play an important role in the geochemical cycling of iron. This study was undertaken to investigate mineral transformations associated with microbial reduction of Fe 3+ and oxidation of Fe 2+ in solid minerals. A fluid sample from the 2450 m depth of the Chinese Continental Scientific Drilling project was collected, and Fe 3+ -reducing and Fe 2+ -oxidizing microorganisms were enriched. The enrichment cultures displayed reduction of Fe 3+ in nontronite and ferric citrate, and oxidation of Fe 2+ in vivianite, siderite, and monosulfide (FeS). Additional experiments verified that the iron reduction and oxidation was biological. Oxidation of FeS resulted in the formation of goethite, lepidocrocite, and ferrihydrite as products. Although our molecular microbiological analyses detected Thermoan-aerobacter ethanolicus as a predominant organism in the enrichment culture, Fe 3+ reduction and Fe 2+ oxidation may be accomplished by a consortia of organisms. Our results have important environmental and ecological implications for iron redox cycling in solid minerals in natural environments, where iron mineral transformations may be related to the mobility and solubility of inorganic and organic contaminants.

American Mineralogist↗

USGS2007

Microbial reduction of structural Fe3+ in nontronite by a thermophilic bacterium and its role in promoting the smectite to illite reaction

The illitization process of Fe-rich smectite (nontronite NAu-2) promoted by microbial reduction of structural Fe3+ was investigated by using a thermophilic metal-reducing bacterium, Thermoanaerobacter ethanolicus, isolated from the deep subsurface. T. ethanolicus was incubated with lactate as the sole electron donor and structural Fe3+ in nontronite as the sole electron acceptor, and anthraquinone-2, 6-disulfonate (AQDS) as an electron shuttle in a growth medium (pH 6.2 and 9.2, 65 ??C) with or without an external supply of Al and K sources. With an external supply of Al and K, the extent of reduction of Fe3+ in NAu-2 was 43.7 and 40.4% at pH 6.2 and 9.2, respectively. X-ray diffraction and scanning and transmission electron microscopy revealed formation of discrete illite at pH 9.2 with external Al and K sources, while mixed layers of illite/smectite or highly charged smectite were detected under other conditions. The morphology of biogenic illite evolved from lath and flake to pseudo-hexagonal shape. An external supply of Al and K under alkaline conditions enhances the smectite-illite reaction during microbial Fe3+ reduction of smectite. Biogenic SiO2 was observed as a result of bioreduction under all conditions. The microbially promoted smectite-illite reaction proceeds via dissolution of smectite and precipitation of illite. Thermophilic iron reducing bacteria have a significant role in promoting the smectite to illite reaction under conditions common in sedimentary basins.

American Mineralogist↗

USGS2006

The global lambda visualization facility: An international ultra-high-definition wide-area visualization collaboratory

The research outlined in this paper marks an initial global cooperative effort between visualization and collaboration researchers to build a persistent virtual visualization facility linked by ultra-high-speed optical networks. The goal is to enable the comprehensive and synergistic research and development of the necessary hardware, software and interaction techniques to realize the next generation of end-user tools for scientists to collaborate on the global Lambda Grid. This paper outlines some of the visualization research projects that were demonstrated at the iGrid 2005 workshop in San Diego, California.

Future Generation Computer Systems↗

USGS2003

Supra-subduction zone extensional magmatism in Vermont and adjacent Quebec: Implications for early Paleozoic Appalachian tectonics

Metadiabasic intrusions of the Mount Norris Intrusive Suite occur in fault-bounded lithotectonic packages containing Stowe, Moretown, and Cram Hill Formation lithologies in the northern Vermont Rowe-Hawley belt, a proposed Ordovician arc-trench gap above an east-dipping subduction zone. Rocks of the Mount Norris Intrusive Suite are characteristically massive and weakly foliated, have chilled margins, contain xenoliths, and have sharp contacts that both crosscut and are parallel to early structural fabrics in the host metasedimentary rocks. Although the mineral assemblage of the Mount Norris Intrusive Suite is albite + actinolite + epidote + chlorite + calcite + quartz, intergrowths of albite + actinolite are probably pseudomorphs after plagioclase + clinopyroxene. The metadiabases are subalkaline, tholeiitic, hypabyssal basalts with preserved ophitic texture. A backarc-basin tectonic setting for the intrusive suite is suggested by its LREE (light rare earth element) enrichment, negative Nb-Ta anomalies, and Ta/Yb vs. Th/Yb trends. Although no direct isotopic age data are available, the intrusions are broadly Ordovician because their contacts are clearly folded by the earliest Acadian (Silurian-Devonian) folds. Field evidence and geochemical data suggest compelling along-strike correlations with the Coburn Hill Volcanics of northern Vermont and the Bolton Igneous Group of southern Quebec. Isotopic and stratigraphic age constraints for the Bolton Igneous Group bracket these backarc magmas to the 477-458 Ma interval. A tectonic model that begins with east-dipping subduction and progresses to outboard west-dipping subduction after a syncollisional polarity reversal best explains the intrusion of deformed metamorphosed metasedimentary rocks by backarc magmas.

Geological Society of America Bulletin↗