Petrographic descriptions are given for rocks in the Yemen Arab Republic (YAR), including mainly Precambrian igneous and metamorphic rocks from the southeastern part of the country, which previously was geologically undescribed. Also included are descriptions of Cretaceous and/or Tertiary lavas of the Yemen Volcanics, Miocene(?) alkali granite, Pliocene caprock of the Guma salt dome, and late Pleistocene and Holocene basalts of the Aden Volcanic Series (?). The petrographic studies permitted the selection of 11 samples of rock for future use in obtaining isotopic analyses for age determinations. Analyses of these rock specimens for trace amounts of gold, indium, mercury, selenium, and thallium completed the geochemical studies. Results of these analyses are interpreted to show that regional geochemical exploration should be undertaken for base and precious metals near Jibal Hufash, the Manakhah area, the region around Al Bayda, the Sa'dah-Majadh area, and the Wadi Jawf area. Additional studies of trace elements in commercial salt deposits of the YAR should be made to evaluate the amounts of mercury and selenium in this industrial raw material.

Open-File Report↗

USGS1978

Tin and related elements in sediments and beach sands from Afghanistan, Iran, and Turkey

Sixty samples of sediments from stream beds, outwash plains, and beaches were collected in Afghanistan, Iran, and Turkey by Fred L. Klinger, U.S. Bureau of Mines, as part of the field work undertaken by the National Geographic-Smithsonian Pyrotechnological Expedition of 1968. Facilities for the analysis of the samples for tin and other metals were not immediately available, but in 1973 arrangements were made for analyses to be made on a time-permitting basis in the U.S. Geological Survey. The original purpose in collecting the samples was to determine whether tin was present in amounts indicative of sources for tin ores used in antiquity for the manufacture of bronze. The results of the analyses not only permitted an evaluation of the potential for tin in the localities sampled, but also afforded chemical and mineralogical data that were interpretable in the context of regional potential for other elements of current industrial use. These include gold, base metals, ferro-alloy metals, beryllium, rare earths, and barium. The original 60 samples of sand were sieved to make three size fraction (>0.707 mm, <O.707->O.177 mm, and <0.177 mm) for spectrographic and chemical analysis. Splits of these fractions were used for replicate analyses to permit evaluation of the precision of the analytical procedures. Further splitting of the <0.707->0.177 mm sand gave fractions from each sample that were separated in bromoform. Concentrates from the heavy-liquid separations were divided magnetically into six parts from most magnetic to least magnetic. These concentrates were analyzed spectrographically. The precision of the spectrographic analyses is well within the limits of precision expected from semiquantitative procedures. Such precision allows semiquantitative spectrographic procedures to be used with confidence as a valuable tool for reconnaissance investigations in which multi-element analyses are necessary. The analyses of the various fractions of sediments and sediment concentrates indicate the sample media in which an element was most likely to occur. Tin exhibited no preferential concentration into any particular medium. However, many elements with which tin is associated, and other elements of industrial use, do concentrate into one or more of the sample media. This indication of a preferred medium permits interpretation of the analyses as to the best sample medium for a particular element in the environment of western Asia. Cassiterite and/or tin were detected in many samples from Afghanistan, Iran, and Turkey, but in most of the samples the tin was present in normal crustal abundance. Sixteen samples, including seven from Afghanistan, eight from Iran, and one from Turkey contain unusually large amounts of tin. The most notable areas of anomalous tin are near Mirzaka, Qala-i-Asad, and Shah Agha in Afghanistan; near Meshed, Shir Kuh, Natanz, Nodus, and Talmesi in Iran; and on the shore of the Balck Sea just west of Trabzon in Turkey. Even in these localities the tin appears to be a minor element associated with other ores. The most common association of tin is with copper at known mineralized areas. This relation may have historical significance in the context of the development of bronze. The results of the analyses provided geochemical data on the distribution of other elements of industrial use and clearly identified nine of the ten known mineral deposits represented by the samples. The known metallization at the reported deposits may be only a part of more complex groups of metals. In Afghanistan an array of anomalous elements at the known gold placers around Mirzaka and along the Anguri River signals the presence of complex ore deposits. These elements are silver, arsenic, gold, bismuth, cadmium, copper, mercury, indium, molybdenum, lead, antimony, tin, thallium, tungsten, and zinc. They may indicate a Carlin-type gold deposit in which the wall-rocks are enriched in micron-sized particles of gold. Other localities in Afghanistan signalled by the results of the analyses to be anomalous and to merit further geochemical exploration are: (1) a reach of the Panjshir River for beryllium, lead, zinc, chromium and nickel; (2) the area near Bamian for beryllium; (3) the Siakhak village area for gold and copper; (4) around Qala-i-Asad and Shah Agha for lead, zinc, gold, and tungsten. Some attention to the distribution of monazite around Siakhak, Shahjui, Qala-i-Asad, and Shah Agha is justified to determine if this ore mineral for the rare earths and thorium is enriched over its normally expectable trace as an accessory mineral in granitic rocks, pelitic schists, and gneisses. In Iran, the pluton of granodiorite porphyry near Sar Cheshmeh, an area where a huge porphyry copper deposit was being investigated by the Geological Survey of Iran when the present samples were collected in 1968, shows as a strong geochemical anomaly for copper and molybdenum. The granitic area near Meshed is geochemically enriched persistently in beryllium, tin, and barium, and locally in gold, lanthanum, niobium, yttrium, and other elements. This area deserves a thorough regional geochemical survey for beryl and nonberyl sources of beryllium, for fluorite, and for the ores of niobium, tin, barium, the rare earths, and thorium. Other localities in Iran that merit geochemical exploration on the basis of these data are: ;1) the areas between Tabas and Deyhuk, east of Naiband, and south of Naiband for barium and zinc; (2) a locality about midway between Kerman and Sirdjan for barium, lanthanum, strontium, and zinc; (4) the Meskani copper mine area for mercury, lead, and nickel as well as copper; (5) the Talmesi copper mine area for such other elements as barium, cobalt, mercury, strontium, and zinc; (6) a small pluton of granodiorite north of Natanz for tungsten and base metals; (7) the vicinity of Zendjan for auriferous polymetallic sufide deposits; (8) gold in the gorge 15 km east of Miyaneh; and (9) the area near Nodus for gold, base metals, molybdenum, and niobium, and possibly uranium. The Harsit River basin in Turkey appears to be a suitable target for geochemical exploration for gold and low-temperature hydrothermal deposits of base metals, barium, and mercury.

Open-File Report↗

USGS1977

Data from geologic investigations in the Yemen Arab Republic during 1976

The results of semiquantitative spectrographic analyses for 31 elements in 126 specimens of rocks from the Yemen Arab Republic, collected mainly during February 1976 from the Precambrian area in the southeastern part of the country, provide background data for use in geochemical evaluation of areas potentially favorable for mineral deposits. Gold and thorium were undetected; the lower limits of determination are 10 parts per million (ppm) and 20 ppm, respectively. For the other elements, the abundances follow geochemical norms for crustal distribution: (1) Fe, Nb, and Zr in Holocene weathering products; (2) Ca and Sr in Pliocene limestone; (3) Mo in Pliocene(?) or Miocene(?) dikes; (4) Be, La, and Sn in Miocene(?) alkalic granite; (5) As, Be, and La in Tertiary and/or Cretaceous felsic tuff; (6) V in Tertiary and/or Cretaceous carbonaceous sedimentary rocks interbedded with volcanic rocks; (7) Be, La, Sn, and Zr in Tertiary and/or Cretaceous undivided volcanics; (8) Sn and W in Precambrian felsite and pegmatite; (9) Co, Cr, Ni, and Ti in Precambrian mafic rocks; (10) Mg and Sr in Precambrian marble and calcsilicate rocks; (11) Y in Precambrilan schist; (12) B and Sc dispersed in rocks of many ages; and (13) Ag, Ba, Bi, Cd, Cu, Mn, Pb, Sb, Sn, and Zn in a hydrothermal replacement deposit in Precambrian sediment. None of the rocks contained as much as 205 ppm equivalent uranium. The highest values for Ag, Cu, Pb, Zn, and Cd were obtained on a sample of hydrothermally altered siltstone not personally collected by the writers. It was said to have come from the Ma'rib area in the eastern part of the Yemen Arab Republic. The source must be studied, because this single sample is high-grade base-metal ore. Among the samples collected by the writers, the economically most significant are altered tuffs, ignimbrites, and felsites exposed between Jibal Hufash and Manakhah on the road from Hudaydah to San'a'. They are strongly anomalous for As and weakly anomalous, variously, for Hg, Mo, and Pb, which elements may constitute an epigenetic dispersion pattern from hidden sulfide deposits. Inasmuch as chalcopyrite and native copper have been reported in the vicinity of Jabal Haraz in the Manakhah area, the rocks of the Yemen Volcanics in this region should be explored for base-metal sulfide deposits. The first results of paleontologic examinations of fossils collected during 1975 and 1976 are presented, as are a list of Landsat images covering the Yemen Arab Republic, and a selected bibliography of reports on geology and the allied sciences relating to the Yemen Arab Republic.

Open-File Report↗

USGS1976

Trace elements in some rocks and slag from the Yemen Arab Republic and their bearing on the iron ore near Sa'dah

Thirty-seven samples of rocks, saprolite, laterite, gossan, and slag were collected in the Yemen Arab Republic during June-July 1975 when field work was conducted to refine an interpretation of the regional geology made from LANDSAT-1 images by M. J. Grolier. These samples we reanalyzed in the laboratories of the U. S. Geological Survey, and the results were interpreted for use in programs of economic development as a guide for the evaluation of mineral resources in the Yemen Arab Republic. The work was undertaken as part of the program of the U. S. Agency for International Development with the cooperation of the Mineral and Petroleum Authority, Ministry of Economy, Yemen Arab Republic.

Open-File Report↗