Geology Reports⌕ Search

Geology topics

Itiya Aneece

Publications and source records attributed to Itiya Aneece.

8 recordsLinked to original sources

Hyperspectral narrowband imaging spectroscopy: A new paradigm for Earth observation

This editorial introduces the Special Issue entitled “Hyperspectral Narrowband Imaging Spectroscopy: A New Paradigm for Earth Observation” in the August 2026 issue of Photogrammetric Engineering & Remote Sensing (PE&RS), the flagship journal of the American Society for Photogrammetry and Remote Sensing (ASPRS). This volume represents the fourth dedicated hyperspectral special issue published in PE&RS, following earlier contributions by Thenkabail et al. (2025, 2024a, 2024b), and continues ASPRS’s commitment to advancing cutting‑edge imaging spectroscopy research and its applications across Earth system science. Remote sensing is undergoing one of the most profound transformations in its history. The emergence of hyperspectral narrowband (HNB) imaging spectroscopy data, capable of acquiring hundreds of contiguous, narrow spectral bands, has shifted the discipline from observing Earth in a handful of broad spectral windows to capturing continuous spectral signatures of the Planet. This transition marks a decisive break from the multispectral paradigm that has dominated satellite remote sensing for nearly five decades, driven by the advent of new orbital imaging spectrometers such as EnMAP, PRISMA, and NASA’s EMIT, and by the forthcoming Surface Biology and Geology (SBG) mission ((Pires Silva et al., 2026; Bourriz et al., 2025; Thenkabail et al., 2025; Chabrillat et al., 2024; Aneece et al., 2024; Dave et al., 2024; Thenkabail et al., 2024a; Thenkabail et al., 2024b; Thenkabail, 2024a; Thenkabail, 2024b; Thompson et al., 2022; Kokaly et al., 2022; Aneece & Thenkabail, 2022; Cawse Nicholson et al., 2021; Guanter et al., 2021; Vangi et al., 2021; Thenkabail et al., 2021). These missions (e.g., Table 1) deliver unprecedented spectral fidelity, improved signal to noise ratios, and global coverage capabilities, enabling a new era of quantitative, spectroscopy based Earth observation. Where multispectral broadbands (MBBs) provide only a few discrete measurements along the electromagnetic spectrum, HNB systems deliver rich, diagnostic information that enables scientists to characterize Earth’s surface with unprecedented biochemical, biophysical, and structural detail (Figure 1a, 1b). The implications for environmental monitoring, agriculture, water resources, and mineral exploration are profound. Several overarching themes emerge: • Spectral fidelity matters. The ability to preserve subtle absorption features is essential for mineral mapping, vegetation trait retrieval, and biochemical modeling. • AI and deep learning are indispensable. From destriping to classification, modern analytics must be scalable, label‑efficient, and capable of exploiting the full spectral–spatial richness of HNB data. • Physics‑based and data‑driven approaches must converge. Radiative transfer models such as PROSAIL, enhanced with localized soil parameterizations, remain foundational for biophysical retrievals and model‑based inference. • Dimensionality reduction and feature extraction are critical. Techniques such as L1‑ISOMAP demonstrate that intelligent manifold learning can unlock the structure of fused, high‑dimensional datasets. • Next‑generation architectures must be interactive and multimodal. ICTNet exemplifies the future of hyperspectral classification: hybrid, synergistic, and capable of modeling both local textures and global spectral dependencies.

Photogrammetric Engineering and Remote Sensing (PE↗

Comparing DESIS hyperspectral and Landsat 10 simulated superspectral data for crop type classification in California's Central Valley

To advance crop type mapping in support of global food and water security, this study compared three spectral configurations: (A) the full 60-band DLR Earth Sensing Imaging Spectrometer (DESIS) hyperspectral narrowband (HNB) dataset, (B) a 14-band subset of DESIS-derived HNBs aligned with the planned Landsat 10 (formerly Landsat Next) spectral configuration (400–1000 nm), and (C) DESIS-based simulations of Landsat 10 superspectral broadbands. The analysis was conducted in California’s Central Valley, hereafter referred to as “the Central Valley”, during the peak growing month of August. DESIS imagery from August 2021, 2022, and 2023 was used sequentially for model development, testing, and independent validation. Over these three years, DESIS provided extensive hyperspectral coverage of much of the 4 million hectares in the Central Valley’s. Analyses were performed on Google Earth Engine using two pixel-based supervised classifiers, Random Forest (RF) and Support Vector Machine (SVM), to differentiate three major crop classes: row crops, grapes and tree crops, and winter wheat/fallow/other. The highest overall accuracy (86%) was achieved using SVM in combination with either the full DESIS hyperspectral dataset or the 14 DESIS narrowbands corresponding to Landsat 10. This finding aligns with earlier studies showing a small number of strategically positioned narrowbands can be optimal for crop type classification. Use of the narrowband datasets resulted in substantially higher accuracy (overall accuracy of 86%) compared to the simulated Landsat 10 broadbands (overall accuracy of 75%), supporting previous studies highlighting the utility of narrowbands. Despite the high accuracy using August imagery, the study indicates more granular crop type classification will require multi-temporal observations spanning the full phenological cycle (June–October), especially for a large number of crop classes. Acquiring task-based hyperspectral imagery over such large areas throughout the growing season remains operationally challenging. In contrast, Landsat 10 superspectral imagery could provide routine coverage across seasons and years that is practical and scalable for future large area crop type mapping and agricultural monitoring.

California↗

Landsat-derived rainfed and irrigated-area product for conterminous United States for the year 2020 (LRIP30 CONUS 2020) using supervised and unsupervised machine learning on the cloud

Accurate maps of irrigated and rainfed croplands are crucial for assessing global food and water security. Irrigated croplands yield two to four times more grain and biomass than rainfed croplands. To meet rising food demand, the proportion of cropland that is irrigated must be increased globally. Because agriculture uses 80% to 90% of global fresh water, understanding changes in cropland extent, crop type, and irrigation is critical for meeting nutritional needs sustainably. The United States has one of the most productive rainfed and irrigated croplands in the world and is a leading producer and exporter of agricultural crops. Precise maps of irrigated and rainfed croplands in the United States are crucial for assessing the current and the future agricultural production capacity in supporting food security. We developed a 30-m resolution rainfed and irrigated area map for the conterminous United States derived from 2019 to 2021 multi-date Landsat-8 data (LRIP30 CONUS 2020). A total of 96 harmonized spectral bands comprising monthly median value composites of eight bands (blue, green, red, NIR, SWIR1, SWIR2, TIR, and enhanced vegetation index [EVI]) were used. A cropland mask was then applied, and reference data were sourced from various sources. A pixel based supervised random forest classifier, and pixel based unsupervised ISODATA clustering classifier were implemented on Google Earth Engine and the ERDAS Imagine workstation to classify, identify, map, and assess accuracies of irrigated and rainfed cropland areas. The LRIP30 CONUS 2020 product achieved an overall accuracy of 93.9%. The irrigated and rainfed classes had producer's accuracies of 90.2% and 95.7%, respectively, and user's accuracies of 90.8% and 95.4%, respectively. The total net cropland area was estimated at 139.4 million hectares (Mha), of which 94.9 Mha (68%) was classified as rainfed and 44.5 Mha (32%) was classified as irrigated. State level summaries highlight regional differences and their implications for national and global food and water security.

conterminous United States↗

Artificial neural network multilayer perceptron models to classify California’s crops using Harmonized Landsat Sentinel (HLS) data

Advances in remote sensing and machine learning are enhancing cropland classification, vital for global food and water security. We used multispectral Harmonized Landsat 8 Sentinel-2 (HLS) 30-m data in an artificial neural network (ANN) multi-layer perceptron (MLP) model to classify five crop classes (cotton, alfalfa, tree crops, grapes, and others) in California's Central Valley. The ANN MLP model, trained on 2021 data from the United States Department of Agriculture's Cropland Data Layer, was validated by classifying crops for an independent year, 2022. Across the five crop classes, the overall accuracy was 74%. Producer's and user's accuracies ranged from 65% to 87%, with cotton achieving the highest accuracies. The study highlights the potential of using deep learning with HLS time series data for accurate global crop classification.

California↗

Automated Cropland Fallow Algorithm (ACFA) for the Northern Great Plains of USA

Cropland fallowing is choosing not to plant a crop during a season when a crop is normally planted. It is an important component of many crop rotations and can improve soil moisture and health. Knowing which fields are fallow is critical to assess crop productivity and crop water productivity, needed for food security assessments. The annual spatial extent of cropland fallows is poorly understood within the United States (U.S.). The U.S. Department of Agriculture Cropland Data Layer does provide cropland fallow areas; however, at a significantly lower confidence than their cropland classes. This study developed a methodology to map cropland fallows within the Northern Great Plains region of the U.S. using an easily implementable decision tree algorithm leveraging training and validation data from wet (2019), normal (2015), and dry (2017) precipitation years to account for climatic variability. The decision trees automated cropland fallow algorithm (ACFA) was coded on a cloud platform utilizing remotely sensed, time-series data from the years 2010–2019 to separate cropland fallows from other land cover/land use classes. Overall accuracies varied between 96%-98%. Producer’s and user’s accuracies of cropland fallow class varied between 70-87%.

International Journal of Digital Earth↗

Global cropland-extent product at 30-m resolution (GCEP30) derived from Landsat satellite time-series data for the year 2015 using multiple machine-learning algorithms on Google Earth Engine cloud

Executive Summary Global food and water security analysis and management require precise and accurate global cropland-extent maps. Existing maps have limitations, in that they are (1) mapped using coarse-resolution remote-sensing data, resulting in the lack of precise mapping location of croplands and their accuracies; (2) derived by collecting and collating national statistical data that are often subjective, leading to substantial uncertainties in cropland-area estimates, as well as their locations; and (3) extracted from one or more classes of a land use–land cover product in which cropland classes are not the focus of mapping, leading to their mixing with other classes and creating significant errors of omission and commission. These limitations can be overcome by producing high-resolution cropland-extent maps using satellite-sensor data, such as Landsat 30-m resolution or higher. The most fundamental cropland product is the high-resolution cropland-extent map because all higher level cropland products, such as crop-watering method (that is, whether crops are irrigated or rainfed), crop types, cropping intensities, cropland fallows, crop productivity, and crop-water productivity, are dependent on a precise and accurate cropland-extent product. Given these realities, the overarching goal of this study was to produce a Landsat satellite-derived global cropland-extent product at 30-m resolution. The work, which involved a paradigm shift in how global cropland-extent maps are produced, involved the following five key steps: (1) petabyte-scale computing that involved multiyear, 8- to 16-day, time-series Landsat 30-m resolution data for the global land surface; (2) composition of analysis-ready data (ARD) cubes; (3) creation of a large global-reference data hub for machine learning; (4) use of multiple machine-learning algorithms (MLAs) by writing software and computing in the cloud; and (5) Google Earth Engine (GEE) cloud computing. The five key steps involved nine distinct phases. First, the world was segmented into 74 agroecological zones (AEZs). Second, Landsat 8- to 16-day data were used to time-composite 10-band (blue, green, red, near-infrared, short-wave infrared band 1, short-wave infrared band 2, thermal infrared, enhanced vegetation index, normalized difference water index, and normalized difference vegetation index) Landsat 30-m resolution data cubes for every 2- to 4-month time period during 3- to 4-year periods (stated as nominal-year 2015 or, simply, 2015), along with two additional 30-m resolution bands (Shuttle Radar Topography Mission elevation, and slope) in each of the 74 AEZs. Third, more than 100,000 reference-training data samples were collected using ground data (some of which were collected using a mobile application), as well as submeter- to 5-m-resolution, very high-resolution imagery sourced from other reliable sources. Fourth, reference-training data were used to create a knowledge base for separating cropland from noncropland. Fifth, MLAs such as the pixel-based supervised random forest and support-vector machines were written on the GEE using Python and JavaScript. Sixth, object-based recursive hierarchical segmentation algorithm was used, in addition to MLAs, to overcome uncertainties. Seventh, MLAs used the knowledge base to classify and separate cropland from noncropland. Eighth, accuracy assessment was conducted by generating error matrices for each of the 74 AEZs using 19,171 independent validation-data samples. Ninth, cropland areas were computed for all countries of the world and compared with United Nation’s (UN’s) Food and Agricultural Organization (FAO) and other national statistics. The outcome was a Landsat-derived global cropland-extent product at 30-m resolution (GCEP30), which has an overall accuracy of 91.7 percent. For the cropland class, producer’s accuracy was 83.4 percent, and user’s accuracy was 78.3 percent. GCEP30 calculated (using direct pixel count) the global net-cropland area (GNCA) for the year 2015 as 1.873 billion hectares (~12.6 percent of the Earth’s terrestrial area). The continental cropland distribution as a percentage of GNCA was Asia, 33 percent; Europe, 25.5 percent; Africa, 16.7 percent; North America, 14.4 percent; South America, 8.1 percent; and Australia and Oceania, 2.4 percent. The worldwide cropland areas in GCEP30 for 2015 were higher by 236 to 299 million hectares (Mha) compared to national statistics reported elsewhere for the same year (for example, in Food and Agriculture Organization’s corporate statistical database [FAOSTAT] and in the monthly irrigated and rainfed crop areas [MIRCA] database). The global cropland area reported for 2015 increased by 344 Mha (22.5 percent), compared to the year 2000. During the same period (2000–2015), the world’s population increased by 20 percent. Whereas some of these areal increases are real increases in cropland areas, others are due to the types of data, methods, and approaches used. Using the highest known resolution (compared to previous coarse-resolution global products) enabled this study to capture fragmented croplands. Coarse-resolution data compute areas on the basis of subpixels, which, for a large proportion of certain land use–land cover classes, will show only a certain percentage of the total pixel area as actual area. Subpixel areas can lead to substantial uncertainties in area computation, as determining the exact fraction of cropland areas within a coarse-resolution pixel is resource intensive and subject to errors. Other innovations in GCEP30 include reference-data hubs, machine learning, and cloud computing. Cropland areas in 214 countries, territories, departments, and regions were calculated for the year 2015 using GCEP30, on the basis of UN’s global administrative unit layers (GAUL) boundaries. The 10 leading countries in terms of cropland area (as a percentage of the GNCA) were India (9.6 percent), United States (8.95 percent), China (8.82 percent), Russia (8.32 percent), Brazil (3.42 percent), Ukraine (2.32 percent), Canada (2.29 percent), Argentina (2.05 percent), Indonesia (2 percent), and Nigeria (1.91 percent). Together, these 10 countries occupy 50 percent of the global cropland, and they have 52 percent of the global population. Their combined cropland area increased by 2 percent between 2000 and 2015, compared to the substantial increase in population of 517 million (15.5 percent). Together, India, United States, China, and Russia encompass 36 percent of the total area. In the United States and Canada, from 2000 to 2015, cropland decreased by about 2 percent, whereas their populations increased by 14 and 13 percent, respectively. The additional food requirements in these 10 countries, which are caused by increased populations, as well as increasing nutritional demands, are met by production increases in existing cropland or through virtual food trade, or both. More than 18 countries, territories, departments, or regions had 60 percent or more of their geographic area as cropland: Republic of Moldova, San Marino, and Hungary had more than 80 percent of the country’s area as cropland; Denmark, Ukraine, Ireland, and Bangladesh, 70 to 80 percent; and Uruguay, Netherlands, United Kingdom, Spain, Lithuania, Poland, Gaza Strip, Czechia, Italy, India, and Azerbaijan, 60 to 70 percent. Europe and South Asia can be considered agricultural capitals of the world, on the basis of their percentages of geographic area as cropland. United States, China, and Russia, which all have high cropland areas, are ranked second, third, and fourth in the world; India is ranked first. However, the amount of cropland as a percentage of the country’s geographic area is relatively very low for United States (18.3 percent), China (17.7 percent), and Russia (9.5 percent), whereas it is 60.5 percent for India. Most African and South American countries, territories, departments, or regions have less than 15 percent of their geographic area as cropland. China and India together house 36 percent of the world’s population; however, between 2000 and 2015, the amount of China’s cropland area fell by 18.9 percent, owing to urban expansion and the abandonment of farmlands caused by demographic changes (that is, the movement of population from villages to cities). In contrast, China’s population grew by 10 percent. The amount of India’s cropland increased by 8.5 percent, whereas its population grew by 20 percent. This study showed that, out of the 10 leading cropland countries, Ukraine, Nigeria, Russia, and Indonesia showed an 18 to 31 percent increase in cropland areas, on the basis of GCEP30 by the year 2015, compared to 2000. Nigeria’s cropland area increased by 25 percent, and its population increased by 31 percent in the same period. In these countries, food security is maintained by cropland expansion, productivity increases, and virtual food trade. Nevertheless, this trend of increasing net-cropland area and productivity will likely become difficult to maintain, owing to diminishing arable lands and plateauing of 50 years of continual yield increases, requiring policymakers to explore novel and data-supported approaches to solving future food security issues. The GCEP30 product, which can be browsed at full resolution at www.croplands.org , has been released for public download and use through U.S. Geological Survey (USGS)–National Aeronautics and Space Administration (NASA) Land Processes Distributed Active Archive Center (see https://lpdaac.usgs.gov/news/release-of-gfsad-30-meter-cropland-extent-products/ ).

Professional Paper↗

A meta-analysis of global crop water productivity of three leading world crops (wheat, corn, and rice) in the irrigated areas over three decades

The overarching goal of this study was to perform a comprehensive meta-analysis of irrigated agricultural Crop Water Productivity (CWP) of the world’s three leading crops: wheat, corn, and rice based on three decades of remote sensing and non-remote sensing-based studies. Overall, CWP data from 148 crop growing study sites (60 wheat, 43 corn, and 45 rice) spread across the world were gathered from published articles spanning 31 different countries. There was overwhelming evidence of a significant increase in CWP with an increase in latitude for predominately northern hemisphere datasets. For example, corn grown in latitude 40–50° had much higher mean CWP (2.45 kg/m³) compared to mean CWP of corn grown in other latitudes such as 30–40° (1.67 kg/m³) or 20–30° (0.94 kg/m³). The same trend existed for wheat and rice as well. For soils, none of the CWP values, for any of the three crops, were statistically different. However, mean CWP in higher latitudes for the same soil was significantly higher than the mean CWP for the same soil in lower latitudes. This applied for all three crops studied. For wheat, the global CWP categories were low (≤0.75 kg/m³), medium (>0.75 to <1.10 kg/m³), and high CWP (≥1.10 kg/m³). For corn the global CWP categories were low (≤1.25 kg/m³), medium (>1.25 to ≤1.75 kg/m³), and high (>1.75 kg/m³). For rice the global CWP categories were low (≤0.70 kg/m³), medium (>0.70 to ≤1.25 kg/m³), and high (>1.25 kg/m³). USA and China are the only two countries that have consistently high CWP for wheat, corn, and rice. Australia and India have medium CWP for wheat and rice. India’s corn, however, has low CWP. Egypt, Turkey, Netherlands, Mexico, and Israel have high CWP for wheat. Romania, Argentina, and Hungary have high CWP for corn, and Philippines has high CWP for rice. All other countries have either low or medium CWP for all three crops. Based on data in this study, the highest consumers of water for crop production also have the most potential for water savings. These countries are USA, India, and China for wheat; USA, China, and Brazil for corn; India, China, and Pakistan for rice. For example, even just a 10% increase in CWP of wheat grown in India can save 6974 billion liters of water. This is equivalent to creating 6974 lakes each of 100 m³ in volume that leads to many benefits such as acting as ‘water banks’ for lean season, recreation, and numerous ecological services. This study establishes the volume of water that can be saved for each crop in each country when there is an increase in CWP by 10%, 20%, and 30%.

International Journal of Digital Earth↗

Accuracies achieved in classifying five leading world crop types and their growth stages using optimal Earth Observing-1 Hyperion hyperspectral narrowbands on Google Earth Engine

As the global population increases, we face increasing demand for food and nutrition. Remote sensing can help monitor food availability to assess global food security rapidly and accurately enough to inform decision-making. However, advances in remote sensing technology are still often limited to multispectral broadband sensors. Although these sensors have many applications, they can be limited in studying agricultural crop characteristics such as differentiating crop types and their growth stages with a high degree of accuracy and detail. In contrast, hyperspectral data contain continuous narrowbands that provide data in terms of spectral signatures rather than a few data points along the spectrum, and hence can help advance the study of crop characteristics. To better understand and advance this idea, we conducted a detailed study of five leading world crops (corn, soybean, winter wheat, rice, and cotton) that occupy 75% and 54% of principal crop areas in the United States and the world respectively. The study was conducted in seven agroecological zones of the United States using 99 Earth Observing-1 (EO-1) Hyperion hyperspectral images from 2008–2015 at 30 m resolution. The authors first developed a first-of-its-kind comprehensive Hyperion-derived Hyperspectral Imaging Spectral Library of Agricultural crops (HISA) of these crops in the US based on USDA Cropland Data Layer (CDL) reference data. Principal Component Analysis was used to eliminate redundant bands by using factor loadings to determine which bands most influenced the first few principal components. This resulted in the establishment of 30 optimal hyperspectral narrowbands (OHNBs) for the study of agricultural crops. The rest of the 242 Hyperion HNBs were redundant, uncalibrated, or noisy. Crop types and crop growth stages were classified using linear discriminant analysis (LDA) and support vector machines (SVM) in the Google Earth Engine cloud computing platform using the 30 optimal HNBs (OHNBs). The best overall accuracies were between 75% to 95% in classifying crop types and their growth stages, which were achieved using 15–20 HNBs in the majority of cases. However, in complex cases (e.g., 4 or more crops in a Hyperion image) 25–30 HNBs were required to achieve optimal accuracies. Beyond 25–30 bands, accuracies asymptote. This research makes a significant contribution towards understanding modeling, mapping, and monitoring agricultural crops using data from upcoming hyperspectral satellites, such as NASA’s Surface Biology and Geology mission (formerly HyspIRI mission) and the recently launched HysIS (Indian Hyperspectral Imaging Satellite, 55 bands over 400–950 nm in VNIR and 165 bands over 900–2500 nm in SWIR), and contributions in advancing the building of a novel, first-of-its-kind global hyperspectral imaging spectral-library of agricultural crops (GHISA: www.usgs.gov/WGSC/GHISA).

Remote Sensing↗