Geology Reports⌕ Search

Geology topics

Henry Trapp

Publications and source records attributed to Henry Trapp.

17 recordsLinked to original sources

Ground Water Atlas of the United States: Segment 11, Delaware, Maryland, New Jersey, North Carolina, Pennsylvania, Virginia, West Virginia

Segment 11 consists of the States of Delaware, Maryland, New Jersey, North Carolina, West Virginia, and the Commonwealths of Pennsylvania and Virginia. All but West Virginia border on the Atlantic Ocean or tidewater. Pennsylvania also borders on Lake Erie. Small parts of northwestern and north-central Pennsylvania drain to Lake Erie and Lake Ontario; the rest of the segment drains either to the Atlantic Ocean or the Gulf of Mexico. Major rivers include the Hudson, the Delaware, the Susquehanna, the Potomac, the Rappahannock, the James, the Chowan, the Neuse, the Tar, the Cape Fear, and the Yadkin-Peedee, all of which drain into the Atlantic Ocean, and the Ohio and its tributaries, which drain to the Gulf of Mexico. Although rivers are important sources of water supply for many cities, such as Trenton, N.J.; Philadelphia and Pittsburgh, Pa.; Baltimore, Md.; Washington, D.C.; Richmond, Va.; and Raleigh, N.C., one-fourth of the population, particularly the people who live on the Coastal Plain, depends on ground water for supply. Such cities as Camden, N.J.; Dover, Del.; Salisbury and Annapolis, Md.; Parkersburg and Weirton, W.Va.; Norfolk, Va.; and New Bern and Kinston, N.C., use ground water as a source of public supply. All the water in Segment 11 originates as precipitation. Average annual precipitation ranges from less than 36 inches in parts of Pennsylvania, Maryland, Virginia, and West Virginia to more than 80 inches in parts of southwestern North Carolina (fig. 1). In general, precipitation is greatest in mountainous areas (because water tends to condense from moisture-laden air masses as the air passes over the higher altitudes) and near the coast, where water vapor that has been evaporated from the ocean is picked up by onshore winds and falls as precipitation when it reaches the shoreline. Some of the precipitation returns to the atmosphere by evapotranspiration (evaporation plus transpiration by plants), but much of it either flows overland into streams as direct runoff or enters streams as base flow (discharge from one or more aquifers). The distribution of average annual runoff (fig. 2) is similar to the distribution of precipitation; that is, runoff is generally greatest where precipitation is greatest. Runoff rates range from more than 50 inches per year in parts of western North Carolina to less than 12 inches in parts of North Carolina, Virginia, and West Virginia. Parts of the seven following physiographic provinces are in Segment 11: the Coastal Plain, the Piedmont, the Blue Ridge, the New England, the Valley and Ridge, the Appalachian Plateaus, and the Central Lowland. The provinces generally trend northeastward (fig. 3). The northeastern terminus of the Blue Ridge Province is in south-central Pennsylvania, and the southwestern part of the New England Province, the Reading Prong, ends in east-central Pennsylvania. The topography, lithology, and water-bearing characteristics of the rocks that underlie the Blue Ridge Province and the Reading Prong are similar. Accordingly, for purposes of this study, the hydrology of the Reading Prong is discussed with that of the Blue Ridge Province. The Coastal Plain Province is a lowland that borders the Atlantic Ocean. The Coastal Plain is as much as 140 miles wide in North Carolina but narrows northeastward to New Jersey where it terminates in Segment 11 at the south shore of Raritan Bay. Although it is generally a flat, seaward-sloping lowland, this province has areas of moderately steep local relief, and its surface locally reaches altitudes of 350 feet in the southwestern part of the North Carolina Coastal Plain. The Coastal Plain mostly is underlain by semiconsolidated to unconsolidated sediments that consist of silt, clay, and sand, with some gravel and lignite. Some consolidated beds of limestone and sandstone are present. The Coastal Plain sediments range in age from Jurassic to Holocene and dip gently toward the ocean. The boundary between the Coastal Plain and the Piedmont Provinces is called the Fall Line (fig. 3) because falls and rapids commonly form where streams cross the contact between the consolidated rocks of the Piedmont (fig. 4) and the soft, semiconsolidated to unconsolidated sediments of the Coastal Plain. The increase in stream gradient at the Fall Line provided favorable locations for mills and other installations that harnessed water power during the early years of the Industrial Revolution, and on most major rivers, the Fall Line coincides with the head of navigation. The Piedmont Province is an area of varied topography that ranges from lowlands to peaks and ridges of moderate altitude and relief. The metamorphic and igneous rocks of this province range in age from Precambrian to Paleozoic and have been sheared, fractured, and folded. Included in this province, however, are sedimentary basins that formed along rifts in the Earth's crust and contain shale, sandstone, and conglomerate of early Mesozoic age, interbedded locally with basaltic lava flows and minor coal beds. The sedimentary rocks and basalt flows are intruded in places by diabase dikes and sills. The mountain belt of the Blue Ridge Province forms the northwestern margin of the Piedmont in most of Segment 11. This belt consists mostly of igneous and high-rank metamorphic rocks but also includes low-rank metamorphic rocks of late Precambrian age and small areas of sedimentary rocks of Early Cambrian age along its western margin. In this report, the Reading Prong of the New England Province, which is an upland that extends from east of the Susquehanna River in Pennsylvania northeastward into New Jersey (fig. 3), is treated as part of the Blue Ridge Province. Part of the Reading Prong in Pennsylvania and New Jersey and a small part of the Piedmont Province in northeastern New Jersey have been glaciated. Glacial deposits completely or partly fill some of the valleys, and the eroding action of the glacial ice removed some of the rock from the ridges. Thus, the glaciated parts of the province have a smoother topography and less relief than other parts. The Valley and Ridge Province is characterized by layered sedimentary rock that has been complexly folded and locally thrust faulted. As the result of repeated cycles of uplift and erosion, resistant layers of well-cemented sandstone and conglomerate form elongate mountain ridges and less resistant, easily eroded layers of limestone, dolomite, and shale form valleys. The rocks of the province range in age from Cambrian to Pennsylvanian. Parts of this province from central Pennsylvania into New Jersey have been glaciated, and glacial deposits fill or partially fill some of the valleys. The Appalachian Plateaus Province is underlain by rocks that are continuous with those of the Valley and Ridge Province, but in the Appalachian Plateaus the layered rocks are nearly flat-lying or gently tilted and warped, rather than being intensively folded and faulted. The boundary between the two provinces is a prominent southeast-facing scarp called the Allegheny Front in most of the northern part of Segment 11 (fig_ 5) and the Cumberland Escarpment in the southern part. The scarp faces the Valley and Ridge Province, and throughout most of the segment, the eastern edge of the Appalachian Plateaus Province is higher than the ridges in the Valley and Ridge. Like parts of the Reading Prong and the Valley and Ridge Province, the northern part of the Appalachian Plateaus Province in Pennsylvania has been glaciated. In the glaciated section, the surface is mantled by glacial drift, and the valleys are partly filled with glacial deposits. The northwestern corner of Segment 11 contains a small part of the Central Lowland Province. This flat lowland is underlain by gently dipping sedimentary rocks, some of which are the same geologic formations as those of the Appalachian Plateaus Province. The two provinces are separated by a northwest- facing scarp. Because of the small area of the Central Lowland Province within the segment and the similarity of aquifer properties with those of the glaciated part of the Appalachian Plateaus Province, the two provinces are discussed together in this report.

Delaware, Maryland, New Jersey, North Carolina, Pe↗

Three-dimensional steady-state simulation of flow in the sand-and-gravel aquifer, southern Escambia County, Florida

The sand-and-gravel aquifer is the only freshwater aquifer in southern Escambia County, Florida and is the source of public water supply for the area, including the City of Pensacola. The aquifer was simulated by a two-layer, digital model to provide hydrologic information for water resource planning. The lower layer represents the main-producing zone; the upper layer represents all of the aquifer above the main-producing zone including an unconfined zone and discontinuous perched, confined , and confining zones. The model was designed for steady-state simulation and predicts the response of the aquifer (changes in water levels) to groundwater pumping where steady-state conditions have been reached. Input to the model includes matrices representing constant-head nodes, starting head, transmissivity of layer 1, leakance between layers 1 and 2, lateral hydraulic conductivity of layer 2, and altitude of the base layer 2. The sources of water to the model are from recharge by infiltrated precipitation (estimated from base runoff), inflow across boundaries, and induced recharge from river leakance in periods of prolonged groundwater pumping. Model output includes final head and drawdown for each layer and total values for discharge and recharge in the model area. The model was calibrated for 1972 pumping and tested by simulating pumpages during 1939-40, 1958, and 1977. Sensitivity analyses showed water levels in both layers were most sensitive to changes in the recharge matrix and least sensitive to river leakage. Suggestions for further development of the model include subdivision and expansion of the grid, assignment of storage coefficients for transient simulations, more intensive study of the stream-aquifer relations, and consideration of the effects of infiltration basins on recharge. (Author 's abstract)

Water-Resources Investigations Report↗

Test well DO-CE 88 at Cambridge, Dorchester County, Maryland

Test well DO-CE 88 at Cambridge, Maryland, penetrated 3,299 feet of unconsolidated Quaternary, Tertiary and Cretaceous sediments and bottomed in quartz-monzonite gneiss. The well was drilled to provide data for a study of the aquifer system of the northern Atlantic Coastal Plain. Twenty-one core samples were collected. Six sand zones were tested for aquifer properties and sampled for ground-water chemistry. Point-water heads were measured at seven depths. Environmental heads (which ranged from - 18.33 to + 44.16 feet relative to sea level)indicate an upward component of flow. A temperature log showed a maximum temperature of 41.9 degrees Celsius and a mean temperature gradient of 0.00838 degrees Celsius per foot. The water analyses delineated the freshwater-saltwater transition zone between 2,650 and 3,100 feet. The ground water changes progressively downward from a sodium bicarbonate to a sodium chloride character. Clays in the analyzed core samples belong to the montmorillonite and kaolinite groups, and mean cation exchange capacity ranged from 8.3 to 38.9 milliequivalents per 100 grams. Vertical and horizontal hydraulic conductivities measured in cores ranged from 1.5 x 10 6 to 1.3 feet per day and from 7.3 x 10 -6 to 1.3 feet per day, respectively, but the most permeable sands were not cored. Porosity was 1.5 percent in the quartz monzonite bedrock and ranged from 22.4 to 41 percent in the overlying sediments. Transmissivities from aquifer tests ranged from 25 to 850 feet squared per day; horizontal hydraulic conductivities ranged from.2.5 to 85 feet squared per day, and intrinsic permeabilities ranged from 0.8 to 23 micrometers squared. Fossils identified in core samples include palynomorphs, dinoflagellates, and foraminifers.

Water Supply Paper↗

Test well DO-CE 88 at Cambridge, Dorchester County, Maryland

Test well DO-CE 88 at Cambridge, Maryland, penetrated 3,299 feet of unconsolidated Quaternary, Tertiary and Cretaceous sediments and bottomed in quartz-monzonite gneiss. The well was drilled to provide data for a study of the aquifer system of the northern Atlantic Coastal Plain. Twenty-one core samples were collected. Six sand zones were tested for aquifer properties and sampled for ground-water chemistry. Point-water heads were measured at seven depths. Environmental heads (which ranged from -18.33 to +44.16 feet relative to sea level) indicate an upward component of flow. A temperature log showed a maximum temperature of 41.9 degrees Celsius and a mean temperature gradient of 0.00838 degrees Celsius per foot. The water analyses delineated the freshwater-saltwater transition zone between 2,650 and 3,100 feet. The ground water changes progressively downward from a sodium bicarbonate to a sodium chloride character. Clays in the analyzed core samples belong to the montmorillonite and kaolinite groups, and mean cation exchange capacity ranged from 8.3 to 38.9 milliequivalents per 100 grams. Vertical and horizontal hydraulic conductivities measured in cores ranged from 1.5 x 10-s to 1.3 feet per day and from 7.3 x 10-6 to 1.3 feet per day, respectively, but the most permeable sands were not cored. Porosity was 1.5 percent in the quartz monzonite bedrock and ranged from 22.4 to 41 percent in the overlying sediments. Transmissivities from aquifer tests ranged from 25 to 850 feet squared per day, horizontal hydraulic conductivities ranged from 2.5 to 85 feet squared per day, and intrinsic permeabilities ranged from 0.8 to 23 micrometers squared. Fossils identified in core samples include palynomorphs, dinoflagellates, and foraminifers.

Maryland↗

Water in the Pensacola, Florida area

The Pensacola, Florida, area, comprising Escambia and Santa Rosa Counties, has abundant water of good quality. Most of the freshwater used, about 101 million gallons per day, comes from the surficial sand-and-gravel aquifer. The deeper Floridan aquifer locally contains saltwater, and is used in places for industrial waste disposal. Surface water is used for cooling and waste disposal, but is available for additional development. Water problems around Pensacola are localized, but they include saltwater encroachment, contamination of ground water by industrial wastes, high iron concentration, corrosiveness, and nitrate in ground water, and flooding. These problems point up the need for continued monitoring of the water resource. (Kosco-USGS)

Florida↗

Preliminary hydrologic budget of the sand-and-gravel aquifer under unstressed conditions: with a section on water-quality monitoring, Pensacola, Florida

The sand-and-gravel aquifer is the only freshwater aquifer in southern Escambia County, Fla. Problems related to the development of the aquifer include sustained yield, contamination, and saltwater intrusion. A digital model was applied to the sand-and-gravel aquifer in central and southern Escambia County treating the aquifer 's 'main producing zone ' as a discrete, leaky, confined aquifer. Under conditions of no pumping, most values for the final-head matrix agreed with assumed values within 4 feet in the area of principal interest. Discharge per unit land area was 1.04 cubic feet per second per square mile, in close agreement with the base runoff streams maintained by the aquifer. Total natural aquifer discharge within the area of principal interest determined by the model was 159 million gallons per day. The applicability of the present non-unique calibration for predicting the effects of pumping is questionable; a multilayered model may be required. Effluent infiltrating from holding lagoons for spray irrigation at the Scenic Hills Sewage Plant may have affected the quality of local perched ground water in the sand-and-gravel aquifer. Observation wells drilled near areas of heavy pumping around Bayou Chico indicated no saltwater intrusion. (Woodard-USGS)

Florida↗

Exploratory water well, St. George Island, Florida

A 1,026-foot well was drilled into the Floridan aquifer on St. George Island in search of a supply of water for residential development in 1971. This is the only well on the island on record to have been drilled below 200 feet for water. The well was abandoned; water flowing from the well was saline. It had a specific conductance of 7,500 micromhos per centimeter at 25° Celsius. The specific conductances of samples taken at drilling depths 217-1,026 feet ranged from 3,140 to 39,600, with the maximum value at 470 ft. A composite geophysical and lithologic log of the well shows spontaneous potential, single-point resistance, gamma-ray, neutron, gamma-gamma, and caliper logs. Well-site notes, a written description of cuttings samples, a graph showing the relation of specific conductance of water samples to the depth of the well at time of sampling, and four chemical analyses of the water are included in the report.

Florida↗

Water resources inventory of northwest Florida

Water resources of the 16 counties of the northwest Florida appear adequate unitl at least 2020. In the 4 westernmost counties, the sand-and-gravel aquifer and streams combined could provide 2,200 to 3,600 million gallons per day of water. Streams outside these counties could provide 5,600 million gallons per day. The Floridan aquifer could provide 220 million gallons per day. Generally, water of quality suitable for most purposes is available throughout the area, although water in smaller streams and in the sand-and-gravel aquifer is acidic and locally contains excessive iron. Water in the upper part of the Floridan aquifer is generally fresh, but saline at depth and in some coastal areas. The quantity of water available in the study area is about 8,020 to 9,420 million gallons per day and projected needs for the year 2020 range from 2,520 to 4,130 million gallons per day. ' Approximate method ' flood-prone area maps cover most of the area. (Woodard-USGS)

Florida↗

Water resources of Okaloosa County and adjacent areas, Florida

Okaloosa County, in the northwest Florida panhandle, uses the Floridan aquifer for water supply, although it also has abundant surface water and ground water in the surficial sand-and-gravel aquifer. Water levels have declined locally more than 90 feet in the upper limestone of the Floridan aquifer. The Floridan aquifer is overlain by the Pensacola clay confining bed, and the Bucatunna Clay subdivides it into two limestone units. Water in the upper limestone is generally of good quality. The lower limestone probably contains saline water. Average daily stream discharge is about 2,500 million gallons. Stream discharge does not diminish excessively during droughts, owing to high base runoff. Water levels in the Floridan aquifer will decline as long as pumping increases in the present areas of withdrawal. The decline could be alleviated by redistribution of pumping, artificial recharge, and the use of the sand-and-gravel aquifer or streams. (Woodard-USGS)

Florida↗

Hydrology of sand-and-gravel aquifer in central and southern Escambia County, Florida

The sand-and-gravel aquifer is the only fresh-water aquifer in the Pensacola area. Problems related to development of the aquifer include maximum safe yield, local contamination, local salt-water intrusion, corrosiveness of the water, areas of high iron concentration, and increasing nitrate concentration. The city of Pensacola is seeking hydrologic information, including water-quality data, to plan for future expansion of the water-supply system. This report summarizes the third year's findings of a 6-year study of the sand-and-gravel aquifer. Although the thickness of the aquifer locally exceeds 1,000 feet (300 metres) most of the clean sand layers are no more than 450 feet (140 metres) below land surface. The highest head is at the north edge of the area; the head is drawn down below sea level in areas of heavy pumping. Ground water moves southward from the northern half of the county to be intercepted near Cantonment. Virtually all ground water discharged south of Cantonment derives from local precipitation. The report contains maps showing concentrations of carbon dioxide, nitrate, and iron in water from the aquifer, potentiometric maps, geohydrologic sections, and lithologic and radioactive logs of test holes.

Florida↗

Availability of ground water for public-water supply in the Pensacola area, Florida: interim report, June 1971

Statement of the problem Earlier hydrologic studies show that ample quantities of soft water of low dissolved solids content are obtainable from the sand-and-gravel aquifer in the Pensacola area. Some wells drilled for the city of Pensacola have yielded water with unacceptably high amounts of iron and carbon dioxide, and wells have had disappointingly low yields. The city, therefore, is seeking hydrologic information, including water-quality data, in an effort to avoid the high cost of well abandonment and to plan for future expansion of the water-supply system. Objectives and approach This study is intended to provide information on the quality and quantity of water available from the sand-and-gravel aquifer, the only fresh-water aquifer in the Pensacola area, and to delineate those areas favorable for public-supply well sites. The project area is southern Escambia County, from Pensacola to S.R. (State Road) 196 north of Quintette (fig. 1). During the first year, effort was concentrated in the southern half of the area, generally south of 30°30', which approximately coincides with Interstate Highway 10 in southeastern Escambia County. The investigation included the collection of well data, chemical analyses of water samples, test drilling, radioactivity logging of test holes and other wells, and water-level measurements.

Florida↗

Geology and ground water resources of Eddy and Foster Counties, North Dakota

Eddy and Foster Counties are in east-central North Dakota, high on the eastern flank of the Williston Basin. They are underlain by 3200 to 4300 feet of Paleozoic and Mesozoic rocks that dip gently to the west. The uppermost formation, the Cretaceous Pierre Shale, lies directly beneath the glacial drift and crops out in the valleys of the James and Sheyenne Rivers. Glacial drift that covers the entire are a averages about 150 feet thick but in certain buried valleys it is as much as 400 feet thick.

North Dakota↗