Geology Reports⌕ Search

Geology topics

Harold Tobin

Publications and source records attributed to Harold Tobin.

9 recordsLinked to original sources
USGS2026

3D broadband ground motion simulations of Cascadia megathrust earthquakes: Full-margin scenarios incorporating variable magnitudes and frontal thrust splay faulting

Great megathrust earthquakes (∼ M w 8–9) that rupture along the Cascadia Subduction Zone pose significant shaking and tsunami hazards to the U.S. Pacific Northwest. Although these large earthquakes are documented in the geologic record, none have been recorded with modern instrumentation, complicating regional seismic hazard assessments. To improve constraints on seismic hazard estimates for future earthquakes, we develop 3D broadband (0–10 Hz) ground‐motion simulations for 36 full‐margin megathrust earthquake scenarios through the Cascadia Coastlines and Peoples Hazards Research Hub. These simulations expand on the M9 Project ( Frankel et al. , 2018 ; Wirth, Frankel, et al. , 2018 ) by incorporating a broader range of rupture parameters—variable magnitudes, splay faulting, and geodetically informed slip distributions. Benchmarking these simulations against the Next Generation Attenuation Subduction (NGA‐Sub) ground‐motion models shows reasonable fits for non‐basin sites, although simulations predict stronger shaking at short (0–2 s) and long (6–10 s) periods. NGA‐Sub basin terms improve fits to synthetic shaking within the Seattle Basin but underpredict amplitudes by a factor of 2 at periods of 2–5 s. We also evaluate how rupture characteristics influence regional inland shaking variability and basin response in the Puget Lowlands. Larger magnitude scenarios generally cause stronger inland shaking due to farther inland extents of slip and larger strong‐motion‐generating fault patches but show little difference in basin amplification within the Puget Lowlands compared to smaller magnitude events. Along‐dip hypocenter location strongly influences overall inland shaking, with offshore (updip) hypocenters generating on average ∼45% higher shaking at long periods (>6 s) compared to onshore (downdip) hypocenters due to rupture directivity effects. Offshore splay faults minimally affect inland shaking but alter offshore deformation important for coupled ground‐shaking and tsunami scenarios. Finally, we show that rupture directivity increases amplification within the Seattle Basin through the generation and interaction of higher order mode surface waves, an effect of 3D basin geometry that cannot be captured using 1D approximations.

British Columbia, California, Oregon, Washington↗
USGS2026

The Cascadia Region Earthquake Science Center (CRESCENT): Advancing understanding of Cascadia's earthquake hazards

The Cascadia Subduction Zone (CSZ) is capable of producing large megathrust earthquakes and tsunamis, posing significant risks to the Pacific Northwest. This paper examines the seismic characteristics of the CSZ, including its offshore coupling, sparse seismicity, and a complex paleoseismic record. While recent advances in geophysical methods and data collection have improved our understanding of subduction zone processes, important uncertainties remain regarding rupture dynamics, ground shaking, and tsunami impacts. The Cascadia Region Earthquake Science Center (CRESCENT) has been established to address these challenges through coordinated research, education, and community engagement. By integrating scientific studies, fostering collaboration, and leveraging new technologies, CRESCENT seeks to improve hazard assessment and resilience in the region. This paper outlines the primary challenges and opportunities in advancing subduction zone science and enhancing societal preparedness for future CSZ events.

California, Oregon, Washington↗
USGS2025

ShakeAlert® version 3: Expected performance in large earthquakes

The ShakeAlert earthquake early warning (EEW) system partners along with U.S. Geological Survey (USGS) licensed operators deliver EEW alerts to the public and trigger automated systems when a significant earthquake is expected to impact California, Oregon, or Washington. ShakeAlert’s primary goal is to provide usable warning times before the arrival of damaging shaking. EEW is most likely to achieve this goal in large‐magnitude earthquakes. In recent years, ShakeAlert has gone through a series of upgrades to its underlying scientific algorithms aimed at improved performance during large earthquakes. Version 3 of this software recently went live in the production system and includes improvements to all algorithms. The main seismic algorithms that detect an earthquake and characterize its location, magnitude, and fault rupture orientation are faster than older versions. Other key changes include: using real‐time geodetic data to characterize the magnitude growth in large earthquakes; the introduction of an alert pause procedure to compromise between speed near the epicenter and improved accuracy at larger distances; and the inclusion of a nonergodic site‐response model in the ground‐motion predictions. ShakeAlert has achieved its primary goal of usable warning times before strong shaking at some locations in real‐time operations in recent M 6 earthquakes. Using offline tests, we demonstrate usable warning times are possible for many sites with peak shaking values of modified Mercalli intensity (MMI) 7–8 in M 7+ earthquakes and also for many MMI 8–9 sites in M 8+ earthquakes. ShakeAlert partners use a variety of MMI and magnitude thresholds in deciding when to alert their users within bounds set by the USGS. Our study shows that there is room to raise the magnitude thresholds up to about M 5.5 without adversely affecting performance in large earthquakes. The ground‐motion criteria are more complex owing to a significant drop‐off in warning times between the MMI 4 and 5 levels of predicted shaking. However, widely used ShakeAlert products, such as the MMI 3 and 4 contour products, can provide sufficiently long warning times before strong shaking in moderate‐to‐great earthquakes to enable a range of protective actions.

Bulletin of the Seismological Society of America↗
USGS2025

Slab tearing and segmented subduction termination driven by transform tectonics

Subduction may terminate when a mid-ocean ridge approaches a trench, introducing buoyant lithosphere that resists subduction, leading to slab detachment and plate boundary reconfiguration. Yet, the spatial and temporal dynamics of slab tearing remain enigmatic due to a lack of modern examples. Here, we integrate new seismic images with regional seismicity to investigate an actively fragmenting subduction system at northern Cascadia’s ridge-trench-fault triple junction where subduction termination is imminent. Our analyses reveal a broad shear-zone initiated at ~4 Ma by exploiting ridge-parallel fabrics of nascent oceanic lithosphere and progressively localized into a mature trench-perpendicular transform boundary. This process severed an oceanic microplate and enabled its diminished subduction relative to adjacent subducting lithosphere. Downdip, we image trench-parallel slab tears offset by the transform, suggesting lateral tear propagation was intersected by the transform boundary, facilitating efficient decoupling of the microplate while allowing adjacent subduction to continue. We propose a 4D model where transform boundaries drive laterally diachronous slab fragmentation and subduction termination.

Vancouver, Washington↗
USGS2024

Late-Quaternary surface displacements on accretionary wedge splay faults in the Cascadia Subduction Zone: Implications for megathrust rupture

Because splay faults branch at a steep dip angle from the plate-boundary décollement in an accretionary wedge, their coseismic displacement can potentially result in larger tsunamis with distinct characteristics compared to megathrust-only fault ruptures, posing an enhanced hazard to coastal communities. Elsewhere, there is evidence of coseismic slip on splay faults during many of the largest subduction zone earthquakes, but our understanding of potentially active splay faults and their hazards at the Cascadia subduction zone remains limited. To identify the most recently active splay faults at Cascadia, we conduct stratigraphic and structural interpretations of near-surface deformation in the outer accretionary wedge for the ~400 km along-strike length of the landward vergence zone. We analyze recently acquired high-frequency sparker seismic data and crustal-scale multi-channel seismic data to examine the record of deformation in shallow slope basins and the upper ~1 km of the surrounding accreted sediments and to investigate linkages to deeper décollement structure. We present a new fault map for widest, most completely locked portion of Cascadia from 45 to 48°N latitude, which documents the distribution of faults that show clear evidence of recent late Quaternary activity. We find widespread evidence for active splay faulting up to 30 km landward of the deformation front, in what we define as the active domain, and diminished fault activity landward outside of this zone. The abundance of surface-deforming splay faults in the active outer wedge domain suggests Cascadia megathrust events may commonly host distributed shallow rupture on multiple splay faults located within 30 km of the deformation front.

British Columbia, California, Oregon, Washington↗
USGS2024

Subducting plate structure and megathrust morphology from deep seismic imaging linked to earthquake rupture segmentation at Cascadia

The origin of rupture segmentation along subduction zone megathrusts and linkages to the structural evolution of the subduction zone are poorly understood. Here, regional-scale seismic imaging of the Cascadia margin is used to characterize the megathrust spanning ~900 km from Vancouver Island to the California border, across the seismogenic zone to a few tens of kilometers from the coast. Discrete domains in lower plate geometry and sediment underthrusting are identified, not evident in prior regional plate models, which align with changes in lithology and structure of the upper plate and interpreted paleo-rupture patches. Strike-slip faults in the lower plate associated with oblique subduction mark boundaries between regions of distinct lower plate geometry. Their formation may be linked to changes in upper plate structure across long-lived upper plate faults. The Juan de Fuca plate is fragmenting within the seismogenic zone at Cascadia as the young plate bends beneath the heterogeneous upper plate resulting in structural domains that coincide with paleo-rupture segmentation.

Oregon, Washington↗
USGS2021

Toward an integrative geological and geophysical view of Cascadia subduction zone earthquakes

The Cascadia subduction zone (CSZ) is an exceptional geologic environment for recording evidence of land level changes, tsunamis, and ground motion that reveals at least 19 great megathrust earthquakes over the past 10 kyr. Such earthquakes are among the most impactful natural hazards on Earth, transcend national boundaries, and can have global impact. Reducing the societal impacts of future events in the U.S. Pacific Northwest and coastal British Columbia, Canada requires improved scientific understanding of megathrust earthquake rupture, recurrence, and corresponding hazards. Despite substantial knowledge gained from decades of research, large uncertainties remain about the characteristics and frequencies of past CSZ earthquakes. In this review, we summarize geological, geophysical, and instrumental evidence relevant to understanding megathrust earthquakes along the CSZ and associated uncertainties. We discuss how the evidence constrains various models of great megathrust earthquake recurrence in Cascadia and identify potential paths forward for the earthquake science community.

British Columbia, Oregon, Washington↗
USGS2017

Bedrock geology of DFDP-2B, central Alpine Fault, New Zealand

During the second phase of the Alpine Fault, Deep Fault Drilling Project (DFDP) in the Whataroa River, South Westland, New Zealand, bedrock was encountered in the DFDP-2B borehole from 238.5–893.2 m Measured Depth (MD). Continuous sampling and meso- to microscale characterisation of whole rock cuttings established that, in sequence, the borehole sampled amphibolite facies, Torlesse Composite Terrane-derived schists, protomylonites and mylonites, terminating 200–400 m above an Alpine Fault Principal Slip Zone (PSZ) with a maximum dip of 62°. The most diagnostic structural features of increasing PSZ proximity were the occurrence of shear bands and reduction in mean quartz grain sizes. A change in composition to greater mica:quartz + feldspar, most markedly below c. 700 m MD, is inferred to result from either heterogeneous sampling or a change in lithology related to alteration. Major oxide variations suggest the fault-proximal Alpine Fault alteration zone, as previously defined in DFDP-1 core, was not sampled.

New Zealand Journal of Geology and Geophysics↗