Geology Reports⌕ Search

Geology topics

H.J. Knebel

Publications and source records attributed to H.J. Knebel.

At least 19 recordsLinked to original sources
USGS2017

The sedimentary framework of the southern basin of Lake George, New York

Information from 240 km of high-resolution seismic reflection profiles has been analyzed to show the bathymetric and subsurface configuration of southern Lake George in the southeastern corner of the Adirondack Mountains, New York. Three units have been identified and sampled in 13 piston cores as long as 7 m and 4 grab samples; they are glacial drift, glaciolacustrine nonorganic clay, and Holocene lake mud rich in organic material. Three deep bedrock basins controlled glacial, glaciolacustrine, and postglacial deposition within the lake. Glaciolacustrine clay is more than 30 m thick in these basins but is generally absent in water depths less than 20 m. An unconformity separates glaciolacustrine clay from overlying Holocene mud in water depths less than 30 m, but the contact is conformable and transitional in deeper water. The unconformity may have originated from subaqueous or subaerial erosion during a low stage of lake level which probably occurred between 10,000 and 700 yr B.P. Holocene lake mud is thin to absent in the shallower waters separating the three basins, but reaches 15-m thickness near the entrance to The Narrows. A new radiocarbon date of 6950 ?? 60 yr B.P. was obtained from a wood fragment which was found in the Holocene lake mud. We found no clear evidence of postglacial tectonic disturbances of the lake sediments although recent releveling profiles suggest that the Adirondack Mountains are undergoing contemporary uplift.

New York↗
USGS2002

Processes controlling the remobilization of surficial sediment and formation of sedimentary furrows in north-central Long Island Sound

Sidescan sonar, bathymetric, subbottom, and bottom-photographic surveys and sediment sampling have improved our understanding of the processes that control the complex distribution of bottom sediments and benthic habitats in Long Island Sound. Although the deeper (>20 m) waters of the central Sound are long-term depositional areas characterized by relatively weak bottom-current regimes, our data reveal the localized presence of sedimentary furrows. These erosional bedforms occur in fine-grained cohesive sediments (silts and clayey silts), trend east-northeast, are irregularly spaced, and have indistinct troughs with gently sloping walls. The average width and relief of the furrows is 9.2 m and 0.4 m, respectively. The furrows average about 206 m long, but range in length from 30 m to over 1,300 m. Longitudinal ripples, bioturbation, and nutclam shell debris are common within the furrows. Although many of the furrows appear to end by gradually narrowing, some furrows show a "tuning fork" joining pattern. Most of these junctions open toward the east, indicating net westward sediment transport. However, a few junctions open toward the west suggesting that oscillating tidal currents are the dominant mechanism controlling furrow formation. Sedimentary furrows and longitudinal ripples typically form in environments which have recurring, directionally stable, and occasionally strong currents. The elongate geometry and regional bathymetry of Long Island Sound combine to constrain the dominant tidal and storm currents to east-west flow directions and permit the development of these bedforms. Through resuspension due to biological activity and the subsequent development of erosional bedforms, fine-grained cohesive sediment can be remobilized and made available for transport farther westward into the estuary.

Journal of Coastal Research↗
USGS2000

Distribution of surficial sediment in Long Island Sound and adjacent waters: Texture and total organic carbon

The surficial sediment distribution within Long Island Sound has been mapped and described using bottom samples, photography, and sidescan sonar, combined with information from the geologic literature. The distributions of sediment type and total organic carbon (TOC) reveal several broad trends that are largely related to the sea-floor geology, the bathymetry, and the effects of modern tidal- and wind-driven currents. Sediment types are most heterogeneous in bathymetrically complex and shallow nearshore areas; the heterogeneity diminishes and the texture fines with decreasing bottom-current energy. Lag deposits of gravel and gravelly sand dominate the surficial sediment texture in areas where bottom currents are the strongest (such as where tidal flow is constricted) and where glacial till crops out at the sea floor. Sand is the dominant sediment type in areas characterized by active sediment transport and in shallow areas affected by fine-grained winnowing. Silty sand and sand-silt-clay mark transitions within the basin from higher- to lower-energy environments, suggesting a diminished hydraulic ability to sort and transport sediment. Clayey silt and silty clay are the dominant sediment types accumulating in the central and western basins and in other areas characterized by long-term depositional environments. The amount of TOC in the sediments of Long Island Sound varies inversely with sediment grain size. Concentrations average more than 1.9% (dry weight) in clayey silt, but are less than 0.4% in sand. Generally, values for TOC increase both toward the west in the Sound and from the shallow margins to the deeper parts of the basin floor. Our data also suggest that TOC concentrations can vary seasonally.

Long Island Sound↗
USGS1999

Seafloor environments in the Long Island Sound estuarine system

Four categories of modern seafloor sedimentary environments have been identified and mapped across the large, glaciated, topographically complex Long Island Sound estuary by means of an extensive regional set of sidescan sonographs, bottom samples, and video-camera observations and supplemental marine-geologic and modeled physical-oceanographic data. (1) Environments of erosion or nondeposition contain sediments which range from boulder fields to gravelly coarse-to-medium sands and appear on the sonographs either as patterns with isolated reflections (caused by outcrops of glacial drift and bedrock) or as patterns of strong backscatter (caused by coarse lag deposits). Areas of erosion or nondeposition were found across the rugged seafloor at the eastern entrance of the Sound and atop bathymetric highs and within constricted depressions in other parts of the basin. (2) Environments of bedload transport contain mostly coarse-to-fine sand with only small amounts of mud and are depicted by sonograph patterns of sand ribbons and sand waves. Areas of bedload transport were found primarily in the eastern Sound where bottom currents have sculptured the surface of a Holocene marine delta and are moving these sediments toward the WSW into the estuary. (3) Environments of sediment sorting and reworking comprise variable amounts of fine sand and mud and are characterized either by patterns of moderate backscatter or by patterns with patches of moderate-to-weak backscatter that reflect a combination of erosion and deposition. Areas of sediment sorting and reworking were found around the periphery of the zone of bedload transport in the eastern Sound and along the southern nearshore margin. They also are located atop low knolls, on the flanks of shoal complexes, and within segments of the axial depression in the western Sound. (4) Environments of deposition are blanketed by muds and muddy fine sands that produce patterns of uniformly weak backscatter. Depositional areas occupy broad areas of the basin floor in the western part of the Sound. The regional distribution of seafloor environments reflects fundamental differences in marine-geologic conditions between the eastern and western parts of the Sound. In the funnel-shaped eastern part, a gradient of strong tidal currents coupled with the net nontidal (estuarine) bottom drift produce a westward progression of environments ranging from erosion or nondeposition at the narrow entrance to the Sound, through an extensive area of bedload transport, to a peripheral zone of sediment sorting. In the generally broader western part of the Sound, a weak tidal-current regime combined with the production of particle aggregates by biologic or chemical processes, cause large areas of deposition that are locally interrupted by a patchy distribution of various other environments where the bottom currents are enhanced by and interact with the seafloor topography.

Marine Geology↗
USGS1997

Physical processes affecting the sedimentary environments of Long Island Sound

A modeling study was undertaken to simulate the bottom tidal-, wave-, and wind-driven currents in Long Island Sound in order to provide a general physical oceanographic framework for understanding the characteristics and distribution of seafloor sedimentary environments. Tidal currents are important in the funnel-shaped eastern part of the Sound, where a strong gradient of tidal-current speed was found. This current gradient parallels the general westward progression of sedimentary environments from erosion or non-deposition, through bedload transport and sediment sorting, to fine-grained deposition. Wave-driven currents, meanwhile, appear to be important along the shallow margins of the basin, explaining the occurrence of relatively coarse sediments in regions where tidal currents alone are not strong enough to move sediment. Finally, westerly wind events are shown to locally enhance bottom currents along the axial depression of the sound, providing a possible explanation for the relatively coarse sediments found in the depression despite tide- and wave-induced currents below the threshold of sediment movement. The strong correlation between the near-bottom current intensity based on the model results and the sediment response as indicated by the distribution of sedimentary environments provides a framework for predicting the long-term effects of anthropogenic activities.

Conference Paper↗
USGS1996

Seafloor environments in Cape Cod Bay, a large coastal embayment

Cape Cod Bay is a glacial, semi-enclosed embayment that has a patchy distribution of modern seafloor sedimentary environments of erosion or nondeposition, deposition, and sediment reworking. Sidescan-sonar records and supplemental bathymetric, sedimentary, subbottom, and physical-oceanographic data indicate that the characteristics and distribution of these three categories of bottom environments are controlled by a combination of geologic and oceanographic processes that range from episodic to long-term and from regional to local. (1) Environments of erosion or nondeposition comprise exposures of bedrock, glacial drift, and coarse lag deposits that contain sediments (where present) ranging from boulder fields to gravelly coarse-to-medium sands. These environments are dominant on the shallow margins of the bay (water depths < 30 m) where they reflect sediment resuspension, winnowing, and transport during modern northerly storms. (2) Environments of deposition are blanketed by fine-grained sediments ranging from muds to muddy fine sands. These environments are dominant across the floor of the central basin (water depths = 30–60 m) where fine-grained sediments (derived from regional and local sources and emplaced primarily during episodic wind- and density-driven flow) settle through the water column and accumulate under weak bottom currents during nonstorm conditions. (3) Environments of sediment reworking contain patches with diverse textures ranging from gravelly sands to muds. These environments occupy much of the transitional slopes between the margins and the basin floor and reflect a combination of erosion and deposition. The patchy distribution of sedimentary environments within the bay reflects not only regional changes in processes between the margins and the basin but local changes within each part of the bay as well. Small-scale patchiness is caused by local changes in the strengths of wave- and wind-driven currents and (on the margins) by local variations in the supply of fine-grained sediments. This study indicates areas within Cape Cod Bay where fine-grained sediments and associated contaminants are likely to be either moved or deposited. It also provides a guide to the locations and variability of benthic habitats.

Cape Cod Bay↗
USGS1995

Seafloor environments within the Boston Harbor-Massachusetts Bay sedimentary system: a regional synthesis

Modern seafloor sedimentary environments within the glaciated, topographically complex Boston Harbor and Massachusetts Bay area have been interpreted and mapped from an extensive collection of sidescan sonar records and supplemental marine geologic data. Three categories of environments are present that reflect the dominant long-term processes of erosion or nondeposition, deposition, and sediment reworking. Indicates areas within the Boston Harbor-Massachusetts Bay sedimentary system where fine-grained sediments and associated contaminants are likely to be either moved or deposited. It also provides a guide to the locations and variability of benthic habitats. -from Authors

Journal of Coastal Research↗
USGS1995

Sidescan-sonar surveys of critical habitats in Long Island Sound, Connecticut

The Long Island Sound estuary is located in the most densely populated region of the U.S.. Due to the enormous surrounding population, large inputs of anthropogenic wastes and toxic chemicals, benthic habitats were degraded. To address this environmental problem, sidescan-sonar mosaics are being developed within specific areas of critical concern. Detailed bathymetric and high-resolution seismic-reflection data assist in interpretations of relief, to relate bottom features to the underlying stratigraphy, and to estimate thicknesses of surficial sediments. To date, several continuous-coverage sidescan-sonar surveys have been completed. These surveys show that the sedimentary environments and benthic habitats in Long Island Sound vary spatially over short distances.

Conference Paper↗
USGS1995

Seafloor environments within the Boston Harbor- Massachusetts Bay sedimentary system: A regional synthesis

Modern seafloor sedimentary environments within the glaciated, topographically complex Boston Harbor and Massachusetts Bay area have been interpreted and mapped from an extensive collection of sidescan sonar records and supplemental marine geologic data. Three categories of environments are present that reflect the dominant long-term processes of erosion or nondeposition, deposition, and sediment reworking. (1) Environments of erosion or nondeposition comprise exposures of bedrock, glacial drift, coarse lag deposits, and possibly coastal plain rocks that contain sediments (where present) ranging from boulder fields to gravelly sands and occur in areas of relatively strong currents. (2) Environments of deposition contain fine-grained sediments ranging from muddy sands to muds that have accumulated in areas of predominantly weak bottom currents. (3) Environments of sediment reworking contain patches with textures ranging from sandy gravels to muds that have been produced by a combination of erosion and deposition in areas with variable bottom currents. The distribution of sedimentary environments across the Boston Harbor-Massachusetts Bay area is extremely patchy. Locally, this patchiness is due either to modifications of bottom-current strength (caused by the irregular topography and differences in water depth) or to small-scale changes in the supply of fine-grained sediments. Regional patchiness, however, reflects differences in geologic and oceanographic conditions among the estuarine, inner shelf, and basinal parts of the sedimentary system. The estuarine part of the system (Boston Harbor) is a depositional trap for fine-grained sediments because it is protected from large waves, has generally weak and variable tidal currents, and receives a large supply of fine grained detritus from natural and anthropogenic sources. The inner shelf, on the other hand, is largely an area of erosion or nondeposition due to sediment removal and redistribution during past sea-level changes, to sediment resuspension and winnowing by modern waves and currents, and to an inadequate supply of fine-grained sediments. The basinal part of the system (Stellwagen Basin) is mainly a tranquil depositional environment in which fine-grained sediments from several potential sources settle through the water column and accumulate under weak bottom currents. This study indicates areas within the Boston Harbor-Massachusetts Bay sedimentary system where fine-grained sediments and associated contaminants are likely to be either moved or deposited. It also provides a guide to the locations and variability of benthic habitats.

Massachusetts Bay↗
USGS1994

Submerged and eroded drumlins off northeastern Massachusetts

Streamlined, oval-shaped, oriented topographic highs in Massachusetts Bay are identified as the erosional remnants of drumlins. The topographic highs correlate with outlines of lag gravel deposits on the sea floor and both the highs and lag gravel seafloor footprint have a distinct east-southeast long axis trend. This trend is similar to the preferred orientation of the long axes of drumlins in the Boston Basin and indicates the flow direction of the late Wisconsinan Laurentide Ice Sheet. Modification of the drumlins occurred during two passages of the shoreline, the first during the late Wisconsinan regression when the drumlins were only slightly eroded. The second passage of the shoreline occurred during the marine transgression, when erosion, in the form of cliff-face retreat, removed the upper part of the drumlins.

Massachusetts↗
USGS1993

Sedimentary environments within a glaciated estuarine-inner shelf system: Boston Harbor and Massachusetts Bay

Three modern sedimentary environments have been identified and mapped across the glaciated Boston Harbor estuary and adjacent inner shelf of Massachusetts Bay by means of an extensive set of sidescan sonar records and supplemental bathymetric, sedimentary, subbottom and bottom-current data. 1. (1) Environments of erosion and nondeposition appear on the sonographs either as patterns with isolated reflections (caused by outcrops of bedrock, glacial drift, and coastal plain rocks) or as patterns of strong backscatter (caused by coarse-grained lag deposits). Sediments in these environments range from boulder fields to gravelly sands with megaripples. Inside the harbor, areas of erosion or nondeposition are found primarily near mainland and insular shores and within constricted tidal channels, whereas, on the shelf, they are present over extensive areas of hummocky topography near the coast and atop local bathymetric highs offshore. 2. (2) Environments of sediment reworking are characterized on the sonographs by patterns with patches of strong to weak backscatter caused by a combination of erosional and depositional processes. These environments have diverse grain sizes that range from sandy gravels to muds. Within the harbor, the locations of reworked sediments are uncorrelated with the bottom topography, but, on the shelf, they are found on the lower flanks of bathymetric highs, within broad lows and in relatively deep water (30-50 m). 3. (3) Environments of deposition are depicted on the sonographs as uniform patterns of weak backscatter. These areas contain relatively fine-grained muddy sands and muds. Inside the harbor, depositional environments are found over extensive subtidal flats and within sheltered depressions, whereas, on the shelf, they are restricted to broad lows mainly in deep water. The extreme patchiness of modern sedimentary environments within the Boston Harbor-Massachusetts Bay system reflects the interaction between the irregular bottom topography and both geologic and oceanographic processes. The estuarine part of the system is an effective trap for fine-grained detritus because of its protected nature, low wave climate, and large supply of sediments. The open shelf, however, is largely mantled by winnowed and sorted sediments as a result of erosion during past sea-level fluctuations, sediment resuspension and transport by modern waves and currents, and a spatially variable supply of fine-grained sediments.

Massachusetts↗
USGS1992

Holocene depocenter migration and sediment accumulation in Delaware Bay: A submerging marginal marine sedimentary basin

The Holocene transgression of the Delaware Bay estuary and adjacent Atlantic coast results from the combined effect of regional crustal subsidence and eustasy. Together, the estuary and ocean coast constitute a small sedimentary basin whose principal depocenter has migrated with the transgression. A millenial time series of isopach and paleogeographic reconstructions for the migrating depocenter outlines the basin-wide pattern of sediment distribution and accumulation. Upland sediments entering the basin through the estuarine turbidity maximum accumulate in tidal wetland or open water sedimentary environments. Wind-wave activity at the edge of the tidal wetlands erodes the aggraded Holocene section and builds migrating washover barriers. Along the Atlantic and estuary coasts of Delaware, the area of the upland environment decreases from 2.0 billion m2 to 730 million m2 during the transgression. The area of the tidal wetland environment increases from 140 million to 270 million m2, and due to the widening of the estuary the area of open water increases from 190 million to 1.21 billion m2. Gross uncorrected rates of sediment accumulation for the tidal wetlands decrease from 0.64 mm/yr at 6 ka to 0.48 mm/yr at 1 ka. In the open water environments uncorrected rates decrease from 0.50 mm/yr to 0.04 mm/yr over the same period. We also present data on total sediment volumes within the tidal wetland and open water environments at specific intervals during the Holocene.

Delaware Bay↗