Geology Reports⌕ Search

Geology topics

H. E. Belkin

Publications and source records attributed to H. E. Belkin.

28 records · Page 2Linked to original sources
USGS1993

Sampling and major element chemistry of the recent (A.D. 1631-1944) Vesuvius activity

Detailed sampling of the Vesuvius lavas erupted in the period A.D. 1631-1944 provides a suite of samples for comprehensive chemical analyses and related studies. Major elements (Si, Ti, Al, Fetotal, Mn, Mg, Ca, Na, K and P), volatile species (Cl, F, S, H2O+, H2O- and CO2), and ferrous iron (Fe2+) were determined for one hundred and forty-nine lavas and five tephra from the A.D. 1631-1944 Vesuvius activity. The lavas represent a relatively homogeneous suite with respect to SiO2, TiO2, FeOtotal, MnO and P2O5, but show systematic variations among MgO, K2O, Na2O, Al2O3 and CaO. The average SiO2 content is 48.0 wt.% and the rocks are classified as tephriphonolites according to their content of alkalis. All of the lavas are silica-undersaturated and are nepheline, leucite, and olivine normative. There is no systematic variation in major-element composition with time, over the period A.D. 1631-1944. The inter-eruption and intra-eruption compositional differences are the same magnitude. The lavas are highly porphyritic with clinopyroxene and leucite as the major phases. Fractionation effects are not reflected in the silica content of the lavas. The variability of MgO, K2O, Na2O, and CaO can be modelled as a relative depletion or accumulation of clinopyroxene. ?? 1993.

Journal of Volcanology and Geothermal Research↗
USGS1993

Fluid inclusion studies of ejected nodules from plinian eruptions of Mt. Somma-Vesuvius

Mt. Somma-Vesuvius (Naples, Italy) has erupted potassium-rich and silica-undersaturated products during a complicated history of plinian and non-plinian events. Coarse-grained cognate nodules are commonly found in the pyroclastics and are upper crustal in origin. We examined cumulate and subeffusive nodules from the 3800 y.B.P. Avellino. A.D. 79 Pompei, and A.D. 472 Pollena eruptions. Silicate-melt and liquid-vapor fluid inclusion studies in clinopyroxene from both types of nodules have been used to assess the fluids attending crystallization and to place constraints on the pressure and temperature of nodule formation. Thermometric and volumetric data from primary and pseudosecondary CO2-H2O and CO2 and coeval silicate-melt fluid inclusions indicate that they were trapped at a pressure of ???1 to ???2.5 kbar at ???1200??C. This suggests a crystallization depth of ???4 to ???10 km. The H2O-bearing fluid inclusions are abundant from plinian eruptions in contrast to non-plinian eruptions where H2O-bearing fluid inclusions were rare. The presence of primary H2O-CO2 fluid inclusions indicates that an immiscible, supercritical H2O-CO2 fluid was in the nodule-forming environment. The H2O-bearing fluid inclusions in plinian nodules may record a higher pre-eruptive H2O content in the bulk magma that is dramatically reflected in the eruption dynamics. ?? 1993.

Journal of Volcanology and Geothermal Research↗
USGS1991

Rock chemistry and fluid inclusion studies as exploration tools for ore deposits in the Sila batholith, southern Italy

The Sila batholith is the focus of an extensive petrogenetic research program, which includes an assessment of its potential to host granite-related ore deposits. Univariate and multivariate statistical techniques were applied to major- and minor-element rock geochemical data. The analysis indicates that the highest potential for mineralization occurs in corundum-normative, peraluminous, unfoliated, relatively late-stage plutons. The plutons are enriched in Rb, Nb, Ta and U, but depleted in Fe, Mg and Sr. The K/Rb, Ba/Rb, Rb/Sr and Rb 3 /Ba·Sr·K indices and high R -factor scores of Si-K-Rb are typical of mineralized granitic rocks. A reconnaissance fluid inclusion study indicates that the sub-solidus rock was infiltrated by solutions of widely different temperatures (50–416°C) and variable salinities (0 to ∼26 wt.% NaCl equivalent). The higher-temperature solutions probably represent granite or magmatic-related Hercynian fluids, whereas the lower-temperature fluids may be either Hercynian or Alpine in age. Fluids with characteristics typical of mineralized “porphyry” systems have not been recognized.

Journal of Geochemical Exploration↗
USGS1989

The campi flegrei (Italy) geothermal system: A fluid inclusion study of the mofete and San Vito fields

A fluid inclusion study of core from the Mofete 1, Mofete 2, Mofete 5, San Vito 1, and San Vito 3 geothermal wells (Campi Flegrei, Campania, Italy) indicates that the hydrothermal minerals were precipitated from aqueous fluids (??CO2) that were moderately saline (3-4 wt.% NaCl equiv.) to hypersaline (> 26 wt.% NaCl equiv.) and at least in part, boiling. Three types of primary fluid inclusions were found in authigenic K-feldspar, quartz, calcite, and epidote: (A) two-phase [liquid (L) + vapor (V)], liquid-rich inclusions with a range of salinity; (B) two-phase (L + V), vaporrich inclusions with low salinity; and (C) three-phase [L + V + crystals (NaCL)], liquid-rich inclusions with hypersalinity. Results of microthermometric and crushing studies are reported for twenty drill core samples taken from the lower portions of the five vertical wells. Data presented for selected core samples reveal a general decrease in porosity and increase in bulk density with increasing depth and temperature. Hydrothermal minerals commonly fill fractures and pore-spaces and define a zonation pattern, similar in all five wells studied, in response to increasing depth (pressure) and temperature. A greenschist facies assemblage, defined by albite + actinolite, gives way to an amphibolite facies, defined by plagioclase (andesine) + hornblende, in the San Vito 1 well at about 380??C. The fluid inclusion salinity values mimic the saline and hypersaline fluids found by drilling. Fluid inclusion V/L homogenization temperatures increase with depth and generally correspond to the extrapolated down-hole temperatures. However, fluid inclusion data for Mofete 5 and mineral assemblage data for San Vito 3, indicate fossil, higher-temperature regimes. A limited 87Sr/86Sr study of leachate (carbonate) and the leached cores shows that for most samples (except San Vito 3) the carbonate deposition has been from slightly 87Sr-enriched fluids and that Sr isotopic exchange has been incomplete. However, San Vito 3 cores show an approach to fluid/rock Sr equilibrium with a fluid similar to modern ocean water in 87Sr/86Sr ratio. The Campi Flegrei volcanic system has evolved undersaturated products, mostly trachyte, and defines a large (??? 12 km) caldera. The hydrothermal system developed in this location can be used as an analog for fossil systems in similar trachytic environments. The potential for ore mineralization is expressed by the recognition, from fluid inclusion and drilling data, of ore-forming environments such as boiling and brine stratification. ?? 1989.

Journal of Volcanology and Geothermal Research↗
USGS1987

Evidence for Late-Paleozoic brine migration in Cambrian carbonate rocks of the central and southern Appalachians: Implications for Mississippi Valley-type sulfide mineralization

Many Lower Paleozoic limestones and dolostones in the Valley and Ridge province of the central and southern Appalachians contain 10 to 25 weight percent authigenic potassium feldspar. This was considered to be a product of early diagenesis, however, 40 Ar 39 Ar "> 40 Ar 39 Ar analyses of overgrowths on detrital K-feldspar in Cambrian carbonate rocks from Pennsylvania, Maryland, Virginia, and Tennessee yield Late Carboniferous-Early Permian ages (278–322 Ma). Simple mass balance calculations suggest that the feldspar could not have formed isochemically, but required the flux of multiple pore volumes of fluid through the rocks, reflecting regional fluid migration events during the Late-Paleozoic Alleghanian orogeny. Microthermometric measurements of fluid inclusions in overgrowths on detrital K-feldspar and quartz grains from unmineralized rocks throughout the study area indicate homogenization temperatures from 100° to 200°C and freezing point depressions of −14° to −18.5°C (18–21 wt.% NaCl equiv). The apparent similarity of these fluids to fluid inclusions in ore and gangue minerals of nearby Mississippi Valley-type (MVT) deposits suggests that the regional occurrences of authigenic K-feldspar and MVT mineralization may be genetically related. This hypothesis is supported by the discovery of authigenic K-feldspar intergrown with sphalerite in several mines of the Mascot-Jefferson City District, E. Tennessee. Regional potassic alteration in unmineralized carbonate rocks and localized occurrences of MVT mineralization are both explainable by a gravity-driven flow model, in which deep brines migrate towards the basin margin under a hydraulic gradient established during the Alleghanian orogeny. The authigenic K-feldspar may reflect the loss of K during disequilibrium cooling of the ascending brines. MVT deposits are probably localized manifestations of the same migrating fluids, occurring where the necessary physical and chemical traps are present.

Geochimica et Cosmochimica Acta↗
USGS1986

Fluid inclusion from drill hole DW-5, Hohi geothermal area, Japan: Evidence of boiling and procedure for estimating CO2 content

Fluid inclusion studies have been used to derive a model for fluid evolution in the Hohi geothermal area, Japan. Six types of fluid inclusions are found in quartz obtained from the drill core of DW-5 hole. They are: (I) primary liquid-rich with evidence of boiling; (II) primary liquid-rich without evidence of boiling; (III) primary vapor-rich (assumed to have been formed by boiling); (IV) secondary liquid-rich with evidence of boiling; (V) secondary liquid-rich without evidence of boiling; (VI) secondary vapor-rich (assumed to have been formed by boiling). Homogenization temperatures (Th) range between 196 and 347??C and the final melting point of ice (Tm) between -0.2 and -4.3??C. The CO2 content was estimated semiquantitatively to be between 0 and 0.39 wt. % based on the bubble behavior on crushing. NaCl equivalent solid solute salinity of fluid inclusions was determined as being between 0 and 6.8 wt. % after minor correction for CO2 content. Fluid inclusions in quartz provide a record of geothermal activity of early boiling and later cooling. The CO2 contents and homogenization temperatures of fluid inclusions with evidence of boiling generally increase with depth; these changes, and NaCl equivalent solid solute salinity of the fluid can be explained by an adiabatic boiling model for a CO2-bearing low-salinity fluid. Some high-salinity inclusions without CO2 are presumed to have formed by a local boiling process due to a temperature increase or a pressure decrease. The liquid-rich primary and secondary inclusions without evidence of boiling formed during the cooling process. The salinity and CO2 content of these inclusions are lower than those in the boiling fluid at the early stage, probably as a result of admixture with groundwater. ?? 1986.

Journal of Volcanology and Geothermal Research↗
USGS1979

Fluid inclusions in salt from the Rayburn and Vacherie domes, Louisiana

Core samples from the Rayburn and Vacherie salt domes in Louisiana were examined for fluid inclusions, in connection with the possible use of such domes for nuclear waste storage sites. Three types of fluid inclusions were found, brine, compressed gas, and oil (in decreasing volume percent abundance). The total amount of such fluids is small, certainly < 0.1 vol. % and probably in the range 0.01 to 0.001 volume %, but the inclusions are highly erratic in distribution. Unlike many bedded salt deposits, the brine inclusions in this salt contain fluids that are not far from simple NaCl-H2O solutions, with very little of other ions. One of three possible explanations for such fluids is that fresh water penetrated the salt at some unknown time in the past and was trapped; if such entry of fresh water has occurred in the past, it might also occur again in the future.

Open-File Report↗