Geology Reports⌕ Search

Geology topics

Greg N. McDonald

Publications and source records attributed to Greg N. McDonald.

5 recordsLinked to original sources
USGS2022

How similar was the 1983 Mw 6.9 Borah Peak earthquake rupture to its surface-faulting predecessors along the northern Lost River fault zone (Idaho, USA)?

We excavated trenches at two paleoseismic sites bounding a trans-basin bedrock ridge (the Willow Creek Hills) along the northern Lost River fault zone to explore the uniqueness of the 1983 M w 6.9 Borah Peak earthquake compared to its prehistoric predecessors. At the Sheep Creek site on the southernmost Warm Springs section, two earthquakes occurred at 9.8−14.0 ka (95% confidence) and 6.5−7.1 ka; each had ∼1.9 m of vertical displacement. About 4 km to the southeast, across the Willow Creek Hills, two ruptures at the Arentson Gulch site on the northernmost Thousand Springs section occurred at 9.0−14.7 ka and 6.1−7.5 ka with ∼1.9 m of vertical displacement each. We synthesize these and previous paleoseismic results into a model of five postglacial (<15 ka) ruptures along a ∼65 km reach of the northern Lost River fault zone. Our results show that the Borah Peak earthquake (34 km; 0.9 m mean displacement) was unique compared to previous ruptures that had both longer and shorter rupture lengths (∼25−38 km), more displacement (mean of ∼1.3−1.4 m), and equal or greater magnitude ( M w 6.9−7.1) than that in the 1983 earthquake. These ruptures support a hypothesis of variable rupture length and displacement on the northern Lost River fault zone and show that predecessors to the 1983 rupture have passed unimpeded through the Willow Creek Hills. Our work demonstrates that normal faults are capable of producing variable spatial-temporal patterns of rupture that, together with comparisons of fault geometry and historical rupture length, improve our understanding of fault segmentation and help inform models of earthquake rupture probability.

Idaho↗
USGS2020

Fault trace mapping and surface-fault-rupture special study zone delineation of the Wasatch Fault Zone, Utah and Idaho

The Wasatch fault zone (WFZ) is a 220-mile-long (350-km) fault zone divided into 10 structural segments extending from southeastern Idaho to central Utah. The central five segments of the WFZ underlie the densely populated Wasatch Front region, where the majority of Utah’s population and economy are proximal to the fault zone. The West Valley fault zone (WVFZ) is an antithetic structure related to the WFZ and runs through the Salt Lake Valley. Communities on or adjacent to the WFZ are at risk of earthquake damage, due to their proximity to the fault zones. During 2016–2018, the Utah Geological Survey and a U.S. Geological Survey collaborator performed updated fault mapping of 39 7.5' quadrangles along the WFZ using recently acquired high-resolution topographic data derived from airborne light detection and ranging (lidar) elevation data. Previous geologic mapping, paleoseismic investigations, historical aerial photography, and field investigations were also used to identify and map surface fault traces and infer fault locations. Special study zones were delineated around fault traces to facilitate understanding of the surface-rupturing hazard and associated risk. Defining these special study zones encourages the creation and implementation of municipal and county geologic-hazard ordinances dealing with hazardous faults. We identified potential paleoseismic investigation sites where fault scarps appear relatively pristine, are located in geologically favorable settings, and where additional earthquake timing data would be beneficial to the continued earthquake research of the WFZ. The fault geometries, attributes, and special study zones were published in the online Utah Geologic Hazards Portal simultaneously with this Report of Investigation (RI). This report contains supplementary material describing the data and methods used to perform the mapping and in locating potential paleoseismic investigation sites in the study area. This work is critical to raise awareness of earthquake hazards in areas of Utah experiencing rapid growth.

Idaho, Utah↗
USGS2014

Holocene and latest Pleistocene paleoseismology of the Salt Lake City segment of the Wasatch Fault Zone, Utah, at the Penrose Drive Trench Site

The Salt Lake City segment (SLCS) of the Wasatch fault zone (WFZ) and the West Valley fault zone (WVFZ) compromise Holocene-active normal faults that bound a large intrabasin graben in northern Salt Lake Valley and have evidence of recurrent, large-magnitude (M ~6-7) surface-faulting earthquakes. However, at the time of this investigation, questions remained regarding the timing, displacement, and recurrence of latest Pleistocene and Holocene earthquakes on the northern SLCS and WVFZ , and whether the WVFZ is seismically independent of, or moves coseismically with, the SLCS. To improve paleoseismic data for the SLCS, we conducted a fault-trench investigation at the Penrose Drive site on the northern SLCS. Two trenches, excavated across an 11-m-high scarp near the northern end of the East Bench fault, exposed colluvial-wedge evidence for fize of six (preferred) surface-faulting earthquakes postdating to Provo-phase shoreline of Lake Bonneville (~14-18 ka). Radiocarbon and luminescence ages support earthquake times at 4.0 ± 0.5 ka (2σ) (PD1), 5.9 ± 0.7 ka (PD2), 7.5 ± 0.8 ka (PD3a), 9.7 ± 1.1 ka (PD3b), 10.9 ± 0.2 ka (PD4), and 12.1 ± 1.6 ka (PD5). At least one additional earthquake occurred at 16.5 ± 1.9 ka (PD6) based on an erosional unconformity that separates deformed Lake Bonneville sily and flat-lying Provo-phase shoreline gravel. Earthquakes PD5-PD1 yield latest Pleistocene (post-Provo) and Holocene mean recurrence intervals of ~1.6 kyr and ~1.7-1.9 kyr, respectively. Using 1.0-1.4 m of per-event vertical displacement for PD5-PD3b corroborate previously identified SLCS earthquakes at 4-10 ka. PD4 and PD5 occurred within an ~8-kyr *17-9 ka) time interval on the SLCS previously interpreted as a period of seismic quiescence, and PD6 possibly corresponds with a previously identified earthquake at ~17 ka (although both events have large timing uncertainties). The Penrose data, when combined with previous paleoseismic results, improve the latest Pleistocene-Holocene earthquake chronology of the SLCS, and demonstrate that the SLCS has been a consistently active source of large-magnitude earthquakes since the latest Pleistocene. At least nine surface-faulting earthquakes (S1-S9) have occurred since the highstand of Lake Bonneville (~18 ka). Where the SLCS earthquake record is most complete (since ~14 ka), per-site estimates of mean recurrence are similar for the latest Pleistocene (post-Provo) (~1.6 kyr), Holocene (~1.6-1.9 kyr), and late Holocene (~1.2-1.4 kyr). These SLCS paleoearthquake data indicate an essentially stable rate of earthquake recurrence since the latest Pleistocene and are important for understanding the earthquake potential of the SLCS, clarifying the seismogenic relation between the SLCS and WVFZ, and forecasting the probabilities of future large-magnitude earthquake in the Wasatch Front region.

Utah↗
USGS2012

Late Holocene earthquake history of the Brigham City segment of the Wasatch fault zone at the Hansen Canyon, Kotter Canyon, and Pearsons Canyon trench sites, Box Elder County, Utah

Of the five central segments of the Wasatch fault zone (WFZ) having evidence of recurrent Holocene surface-faulting earthquakes, the Brigham City segment (BCS) has the longest elapsed time since its most recent surface-faulting event (~2.1 kyr) compared to its mean recurrence time between events (~1.3 kyr). Thus, the BCS has the highest time-dependent earthquake probability of the central WFZ. We excavated trenches at three sites––the Kotter Canyon and Hansen Canyon sites on the north-central BCS and Pearsons Canyon site on the southern BCS––to determine whether a surface-faulting earthquake younger than 2.1 ka occurred on the BCS. Paleoseismic data for Hansen Canyon and Kotter Canyon confirm that the youngest earthquake on the north-central BCS occurred before 2 ka, consistent with previous north-central BCS investigations at Bowden Canyon and Box Elder Canyon. At Hansen Canyon, the most recent earthquake is constrained to 2.1–4.2 ka and had 0.6–2.5 m of vertical displacement. At Kotter Canyon, we found evidence for two events at 2.5 ± 0.3 ka and 3.5 ± 0.3 ka, with an average displacement per event of 1.9–2.3 m. Paleoseismic data from Pearsons Canyon, on the previously unstudied southern BCS, indicate that a post-2 ka earthquake ruptured this part of the segment. The Pearsons Canyon earthquake occurred at 1.2 ± 0.04 ka and had 0.1–0.8 m of vertical displacement, consistent with our observation of continuous, youthful scarps on the southern 9 km of the BCS having 1–2 m of late Holocene(?) surface offset. The 1.2-ka earthquake on the southern BCS likely represents rupture across the Weber–Brigham City segment boundary from the penultimate Weber-segment earthquake at about 1.1 ka. The Pearsons Canyon data result in a revised length of the BCS that has not ruptured since 2 ka (with time-dependent probability implications), and provide compelling evidence of at least one segment-boundary failure and multi-segment rupture on the central WFZ. Our paleoseismic investigations of the BCS clarify the timing, displacement, and extent of late Holocene earthquakes on the segment, and importantly, confirm the long elapsed time since the most recent earthquake on most of the BCS.

Utah↗