Geology topics

Greg M. Stock

Publications and source records attributed to Greg M. Stock.

At least 19 recordsLinked to original sources

USGS2024

Field evidence and indicators of rockfall fragmentation and implications for mobility

Rockfall fragmentation can play an important role in hazard studies and the design of protective measures. However, the current lack of modeling tools that incorporate rock fragmentation mechanics is a limitation to enhancing studies and design. This research investigates the fragmentation patterns of rockfalls and analyzes the resulting distribution of fragment sizes within corresponding rockfall deposits. We focus on small rock fragments, which provide insights into the dynamics of the rockfall event and can be used as input for numerical modeling. We analyzed multiple rockfall events from locations worldwide, each exhibiting different degrees of fragmentation. Using image analysis techniques, we mapped all visible blocks, determined their volumes, and measured the distances they travelled from the initial point of impact. A key finding is the identification of three indicators of fragmentation. First, in cases where fragmentation was largely absent, we observed a trend of increasing block size with distance from the impact point or source area, which aligns with previously published findings. However, for energetic rockfall events characterized by intense fragmentation, we observed that small fragments exhibited longer travel distances compared to larger fragments. This distinction allowed us to differentiate blocks primarily resulting from the disaggregation process from those primarily resulting from dynamic fragmentation, with implications for rockfall mobility. Second, although the size distribution of rockfall deposits exhibits a power-law scaling for volumes larger than a minimum size threshold corresponding to a rollover of the distribution, in some case studies a deviation from power-law scaling is observed, indicating a process of larger block comminution due to fragmentation. Third, we found that rockfalls with fragmentation experience reduced mobility, indicated by higher reach angles, and higher lateral dispersion showing a wider distribution of trajectories. We interpret these findings as being directly related to the energy-consuming nature of fragmentation, which prevents farther deposition of fragmented rock blocks.

Albacete province, Lombardy and Aosta Valley, Yose↗

USGS2022

Rainfall triggering of post-fire debris flows over a 28-year period near El Portal, California, USA

Wildfires frequently affect the steep hillslopes near El Portal, California (United States), a small community established during the California Gold Rush in the mid-1800s. In addition to the historical significance of El Portal, State Route 140 (SR 140) is a major transportation and economic corridor connecting the San Joaquin Valley to Yosemite National Park (YNP). In 2019, an estimated 4.5 million tourists visited and accessed YNP via SR 140. In the years after wildfires, the burned watersheds produced debris flows during intense rainfall, impacting the El Portal community and motorists traveling on SR 140 and local roads. The steepness of the hillslopes and confinement of the valley limit options for mitigating debris-flow risk. As such, emergency managers are left with evacuation orders or temporary road closures as the best options for risk reduction. The effectiveness of these options is highly dependent on establishing an accurate local rainfall intensity-duration threshold that officials can use to guide emergency response actions and timing. We present an overview of the rainfall conditions that initiated 12 post-fire debris-flow events near El Portal from 1991 to 2018 and objectively define rainfall intensity-duration thresholds from triggering rainfall rates. Our results highlight the modest rainfall rates that triggered debris flows in these steep watersheds, while radar data from more recent events (2012–2018) portray the spatial variability of intense rainfall in the area. Additional rainfall monitoring is needed to provide a robust rainfall threshold that will effectively mitigate risk for residents and motorists while minimizing the impact of road closures and evacuations.

California↗

USGS2020

Progress and lessons learned from responses to landslide disasters

Landslides have the incredible power to transform landscapes and also, tragically, to cause disastrous societal impacts. Whereas the mechanics and effects of many landslide disasters have been analyzed in detail, the means by which landslide experts respond to these events has garnered much less attention. Herein, we evaluate nine landslide response case histories conducted by the U.S. Geological Survey over the past two decades and summarize the event history, the response conducted, and the lessons learned from each event. We group the responses into three categories—providing event context from past events, addressing ongoing hazards, and acquiring data for the future—and present the nine case studies accordingly. We also summarize the progress in landslide response that has been made over the past two decades, including insights and advancements on the preparation for such events, the use of new technologies, and the importance of clear communication between all parties during disasters. We believe that exchanging and sharing experiences such as these will promote more clear and successful approaches for responses to landslide disasters in the future.

Book chapter↗

USGS2020

Remote thermal detection of exfoliation sheet deformation

A growing body of research indicates that rock slope failures, particularly from exfoliating cliffs, are promoted by rock deformations induced by daily temperature cycles. Although previous research has described how these deformations occur, full three-dimensional monitoring of both the deformations and the associated temperature changes has not yet been performed. Here we use integrated terrestrial laser scanning (TLS) and infrared thermography (IRT) techniques to monitor daily deformations of two granitic exfoliating cliffs in Yosemite National Park (CA, USA). At one cliff, we employed TLS and IRT in conjunction with in situ instrumentation to confirm previously documented behavior of an exfoliated rock sheet, which experiences daily closing and opening of the exfoliation fracture during rock cooling and heating, respectively, with a few hours delay from the minimum and maximum temperatures. The most deformed portion of the sheet coincides with the area where both the fracture aperture and the temperature variations are greatest. With the general deformation and temperature relations established, we then employed IRT at a second cliff, where we remotely detected and identified 11 exfoliation sheets that displayed those general thermal relations. TLS measurements then subsequently confirmed the deformation patterns of these sheets showing that sheets with larger apertures are more likely to display larger thermal-related deformations. Our high-frequency monitoring shows how coupled TLS and IRT allows for remote detection of thermally induced deformations and, importantly, how IRT could potentially be used on its own to identify partially detached exfoliation sheets capable of large-scale deformation. These results offer a new and efficient approach for investigating potential rockfall sources on exfoliating cliffs.

California↗

USGS2020

Opportunities and challenges for restoration of the Merced River through Yosemite Valley, Yosemite National Park, USA

Successful river restoration requires understanding and integration of multiple disciplinary perspectives, including evaluations of past and ongoing watershed processes, local geomorphic response, and impacts unique to human activity. Nowhere is this more apparent than along the Merced River in Yosemite National Park, USA, where both an outstanding natural landscape and the consequences of over a century of human disturbances continue to interact. An intact upstream watershed highlights the importance here of local impacts on geomorphic response. Incision and the resulting decoupling of the channel from its adjacent late-Holocene floodplain are consequences of reduced channel roughness, likely from de-snagging the river, and instream gravel mining in the 19th and early 20th century. Riparian-zone disturbance by visitor use has damaged riparian vegetation and soils, inducing channel widening. Revetments and channel-spanning bridges, the latter being visible and oft-cited impacts to fluvial processes, have distorted the natural evolution of meanders and induced local channel narrowing. The historical rate of sediment export from Yosemite Valley has greatly exceeded replenishment from upstream and lateral sources, creating a deficit that now inhibits recovery via passive restoration of more natural channel form and function. Climate change may amplify now-diminished fluvial processes but also exacerbate the rate of sediment export. These conditions, reflecting a complex intersection of geologic history, modern geomorphic processes, and human interactions, demonstrate how a limited influx of sediment coupled with intensive human use can have long-term consequences for riverine conditions, restoration opportunities, and social engagement with the riverine landscape.

California↗

USGS2020

Rock strength properties of granitic rocks in Yosemite Valley, Yosemite National Park, California

Yosemite National Park, located in the central part of California’s Sierra Nevada mountains, is a glacially carved landscape filled with iconic rock formations such as Cathedral Peak, El Capitan, and Half Dome. Igneous rocks, consisting primarily of variations of granite, granodiorite, and tonalite, make up the majority of the bedrock geology and their overall strength supports the spectacular cliffs and domes of Yosemite Valley that draw many visitors to the park. These same sheer cliffs also are the source areas for frequent rock falls, which, in addition to being the primary mechanism for cliff formation, can also pose a hazard to visitors and infrastructure located below. To obtain rock strength parameters for use in assessing rock-fall potential in Yosemite National Park, we conducted a comprehensive rock mechanics laboratory testing program on a set of granitic rocks that form many of the cliffs in Yosemite Valley.

California↗

USGS2020

Quantifying 40 years of rockfall activity in Yosemite Valley with historical Structure-from-Motion photogrammetry and terrestrial laser scanning

Rockfalls and rockslides are often dominant geomorphic processes in steep bedrock landscapes, but documenting their occurrence can be challenging, requiring frequent monitoring and well resolved spatial data. Repeat application of remote sensing methods such as Terrestrial Laser Scanning (TLS) and Structure-from-Motion (SfM) photogrammetry can detect even very small rockfalls, but typically these acquisitions span only years and may not record rockfall activity representative of longer-term rates of cliff erosion. Inventory databases can extend rockfall records, but are commonly incomplete and prone to observation bias. We employed TLS and SfM on two adjacent cliffs (El Capitan and Middle Brother) in Yosemite Valley, integrating semi-annual data collections from 2010 to 2017 with “historical” (archival) SfM models derived from oblique photographs taken in 1976. Comparing the 1976 SfM models against more recent data allows for more accurate and precise rockfall detection and volume measurement over a 40-year period. Change detection indicates that 235 rockfalls occurred from the two cliffs, more than twice as many events as are recorded in Yosemite's inventory database. Although individual rockfall volumes reported in the inventory database vary from those measured by SfM-TLS, reported cumulative volumes are similar to measured volumes, likely because the large-volume events that account for most of the cumulative volume tend to be widely observed and well-documented. Volume-frequency relationships indicate that the cliffs erode predominantly by less frequent, larger-volume rockfalls, at rates of 0.9 to 1.7 mm/yr. Our study demonstrates how integrated SfM and TLS measurements, especially utilizing SfM models derived from historical imagery, allow detection and quantification of rockfalls spanning several decades, complementing and improving inventory databases, informing rockfall hazard assessment, and providing longer-term rates of cliff erosion.

California↗

USGS2020

A new data set of granitic rock strength values from Yosemite Valley, California: Applications to rock fall assessment

To explore connections between rock strength and rock falls, we undertook a comprehensive rock mechanics testing program for six granitic rock types in Yosemite Valley (California, USA) where rock falls are a common geomorphic and sometimes hazardous process. We collected samples from boulders located at the base of cliffs, with the inherent assumption that the intact boulders should provide reasonable estimates of full-strength values. Our testing program included unconfined compressive strength tests, triaxial compressive strength tests, Brazilian tensile strength tests, and Mode I fracture toughness strength testing using two different types of samples – chevron bend (CB) and cracked chevron notched Brazilian disk (CCNBD). Our results, consisting of 88 individual tests, provide the most detailed evaluation of rock strength in Yosemite Valley to date. These results provide the data needed to evaluate the various failure modes (e.g., shear failure of wedge instabilities, tensile failure of overhangs) that might be expected for rock falls from cliffs in Yosemite. We expect that these data will provide an important resource for the evaluation of rock falls and other geomorphological studies in Yosemite National Park.

California↗

USGS2019

Detection of rock bridges by infrared thermal imaging and modeling

Characterization of rock discontinuities and rock bridges is required to define stability conditions of fractured rock masses in both natural and engineered environments. Although remote sensing methods for mapping discontinuities have improved in recent years, remote detection of intact rock bridges on cliff faces remains challenging, with their existence typically confirmed only after failure. In steep exfoliating cliffs, such as El Capitan in Yosemite Valley (California, USA), rockfalls mainly occur along cliff-parallel exfoliation joints, with rock bridges playing a key role in the stability of partially detached exfoliation sheets. We employed infrared thermal imaging (i.e., thermography) as a new means of detecting intact rock bridges prior to failure. An infrared thermal panorama of El Capitan revealed cold thermal signatures for the surfaces of two granitic exfoliation sheets, consistent with the expectation that air circulation cools the back of the partially detached sheets. However, we also noted small areas of warm thermal anomalies on these same sheets, even during periods of nocturnal rock cooling. Rock attachment via rock bridges is the likely cause for the warm anomalies in the thermal data. 2-D model simulations of the thermal behavior of one of the monitored sheets reproduce the observed anomalies and explain the temperature differences detected in the rock bridge area. Based on combined thermal and ground-based lidar imaging, and using geometric and rock fracture mechanics analysis, we are able to quantify the stability of both sheets. Our analysis demonstrates that thermography can remotely detect intact rock bridges and thereby greatly improve rockfall hazard assessment.

California↗

USGS2019

Extent of the Last Glacial Maximum (Tioga) glaciation in Yosemite National Park and vicinity, California

Yosemite National Park, located in the central Sierra Nevada in California, is an icon of the U.S. National Park system. It is famous for its many spectacular geologic features, which include the towering cliffs and hanging waterfalls of Yosemite Valley and the rounded granite domes, deep blue lakes, and jagged peaks and spires of the high country. More subtle but just as spectacular are the vast areas of polished granite, linear scratches, and isolated boulders scattered across the landscape. All of these features owe their origin, at least in part, to glaciers. Glaciers originating at the crest of the Sierra Nevada flowed down preexisting river canyons numerous times throughout the Quaternary Period (the past 2.6 million years). Although the field evidence for past glaciations is necessarily incomplete, at least seven distinct glacial periods have been identified in the Sierra Nevada, spanning a minimum of 1.5 million years. This map shows the extent of alpine icefields and associated valley glaciers in Yosemite National Park and vicinity during the most recent large glaciation, known as the Last Glacial Maximum, a globally recognized cold period characterized by low sea levels and the growth of ice sheets and mountain glaciers. In the Sierra Nevada, the Last Glacial Maximum glaciation is referred to as the Tioga glaciation. By virtue of being the most recent of the large Pleistocene glaciations, the evidence for the Tioga glaciation is abundant and relatively well preserved in the Yosemite landscape. The Tioga glaciation likely involved at least two, and perhaps as many as four, major glacial advances spanning the interval from approximately 27,000 to 15,000 years ago; the largest of these, representing the maximum ice extent shown on the map, occurred from approximately 21,000 to 18,000 years ago. Although it is possible that the various Tioga-age glaciers in the study area attained their maximum extents at slightly different times during the Last Glacial Maximum, for the purposes of this map we assume that they reached their maximum extents simultaneously. The maximum ice extent shown here may have occupied certain areas only briefly. During the maximum extent of the Tioga glaciation, glaciers and ice fields covered most areas in and around Yosemite National Park above 2,700 meters elevation, having a profound impact on the Yosemite landscape. In addition to sculpting most of the granite monoliths for which the park is famous, glaciation also dictated the distribution of many geological, hydrological, and ecological features. Thus, the lasting effects of Tioga glaciation are still readily observable in Yosemite National Park today.

California↗

USGS2019

Relaxation response of critically stressed macroscale surficial rock sheets

Rock environments both underground and on Earth’s surface show indications of energetic macroscale fracture. In tunnels and excavations, these manifest as rockbursts—energetic explosions of rock that can damage engineering projects, and may pose ongoing financial and safety risk as rock stresses adjust during post-failure relaxation. In natural settings at the surface, evidence for rockbursts exist in the form of tent-like structures of ruptured exfoliation sheets, but few direct observations of such events exist, precluding the analysis of how natural rock formations may evolve after rupture. Here we investigate the post-failure evolution of a granitic rock dome following rapid fracture events (i.e., surficial rockbursts) that occurred in California, USA during 2014–2016. Building upon previous work that showed a thermal stress origin for the observed fracturing, we investigate the return to background stress conditions (i.e., stress relaxation) observed in both short- (week, month) and long-term (multi-year) rock deformation trends. Acoustic emissions, deformation, and environmental monitoring data indicate that partially detached rock sheets forming the surface of the dome undergo fracture aperture closing during cooling periods, concurrent with reduction of rock stress by the source of forcing (i.e., thermal stress). However, with sufficient critical and/or subcritical fracture, our observations also show that rock sheets can become decoupled from the source of stress, resulting in a long-term return to background stress conditions. Our results provide insight into the cyclic and likely ephemeral nature of rock fracture in surficial rock domes, as well as in underground rockburst environments.

Rock Mechanics and Rock Engineering↗

USGS2018

Rapid 3-D analysis of rockfalls

Recent fatal and damaging rockfalls in Yosemite National Park indicate the need for rapid response data collection methods to inform public safety and assist with management response. Here we show the use of multiple-platform remote sensing methods to rapidly capture pertinent data needed to inform management and the public following a several large rockfalls from El Capitan cliff in Yosemite Valley, California.

GSA Today↗

USGS2018

Thermal influences on spontaneous rock dome exfoliation

Rock domes, with their onion-skin layers of exfoliation sheets, are among the most captivating landforms on Earth. Long recognized as integral in shaping domes, the exact mechanism(s) by which exfoliation occurs remains enigmatic, mainly due to the lack of direct observations of natural events. In August 2014, during the hottest days of summer, a granitic dome in California, USA, spontaneously exfoliated; witnesses observed extensive cracking, including a ~8000 kg sheet popping into the air. Subsequent exfoliation episodes during the following two summers were recorded by instrumentation that captured—for the first time—exfoliation deformation and stress conditions. Here we show that thermal cycling and cumulative dome surface heating can induce subcritical cracking that culminates in seemingly spontaneous exfoliation. Our results indicate that thermal stresses—largely discounted in dome formation literature—can play a key role in triggering exfoliation and therefore may be an important control for shaping domes worldwide.

Nature Communications↗

USGS2018

Thermally induced fracture of macroscale surficial granite sheets

Geologically diverse landforms around the world show indications of energetic macroscale fracture. These fractures are sometimes displayed dramatically as so-called “A-tents”, whereby relatively thin rock sheets push upwards and fracture, forming tent-like voids beneath the ruptured sheets. The origin and formation of such features has been a topic of considerable interest and analysis for over a century. Here we show that thermally-induced stresses, coincident with particularly hot days during particularly hot years, were responsible for recent (2014-2016) energetic ruptures of rock sheets forming a granitic exfoliation dome in California, USA. Through a three-year field effort, we found that subcritical fracture occurred due to diurnal and seasonal cumulative thermal stresses. However, our analyses also indicate that subsequent critical fracture could only have been reached if thermal stresses acted in concert with existing tectonic stresses. Thus, we offer a superposition triggering mechanism (background tectonic stresses with cyclic thermal stresses) to explain these rock fracture features.

Conference Paper↗

USGS2017

Assessing rockfall susceptibility in steep and overhanging slopes using three-dimensional analysis of failure mechanisms

Rockfalls strongly influence the evolution of steep rocky landscapes and represent a significant hazard in mountainous areas. Defining the most probable future rockfall source areas is of primary importance for both geomorphological investigations and hazard assessment. Thus, a need exists to understand which areas of a steep cliff are more likely to be affected by a rockfall. An important analytical gap exists between regional rockfall susceptibility studies and block-specific geomechanical calculations. Here we present methods for quantifying rockfall susceptibility at the cliff scale, which is suitable for sub-regional hazard assessment (hundreds to thousands of square meters). Our methods use three-dimensional point clouds acquired by terrestrial laser scanning to quantify the fracture patterns and compute failure mechanisms for planar, wedge, and toppling failures on vertical and overhanging rock walls. As a part of this work, we developed a rockfall susceptibility index for each type of failure mechanism according to the interaction between the discontinuities and the local cliff orientation. The susceptibility for slope parallel exfoliation-type failures, which are generally hard to identify, is partly captured by planar and toppling susceptibility indexes. We tested the methods for detecting the most susceptible rockfall source areas on two famously steep landscapes, Yosemite Valley (California, USA) and the Drus in the Mont-Blanc massif (France). Our rockfall susceptibility models show good correspondence with active rockfall sources. The methods offer new tools for investigating rockfall hazard and improving our understanding of rockfall processes.

Landslides↗

USGS2016

Rockfall triggering by cyclic thermal stressing of exfoliation fractures

Exfoliation of rock deteriorates cliffs through the formation and subsequent opening of fractures, which in turn can lead to potentially hazardous rockfalls. Although a number of mechanisms are known to trigger rockfalls, many rockfalls occur during periods when likely triggers such as precipitation, seismic activity and freezing conditions are absent. It has been suggested that these enigmatic rockfalls may occur due to solar heating of rock surfaces, which can cause outward expansion. Here we use data from 3.5 years of field monitoring of an exfoliating granite cliff in Yosemite National Park in California, USA, to assess the magnitude and temporal pattern of thermally induced rock deformation. From a thermodynamic analysis, we find that daily, seasonal and annual temperature variations are sufficient to drive cyclic and cumulative opening of fractures. Application of fracture theory suggests that these changes can lead to further fracture propagation and the consequent detachment of rock. Our data indicate that the warmest times of the day and year are particularly conducive to triggering rockfalls, and that cyclic thermal forcing may enhance the efficacy of other, more typical rockfall triggers.

California↗

USGS2014

Quantitative rock-fall hazard and risk assessment for Yosemite Valley, Yosemite National Park, California

Rock falls are common in Yosemite Valley, California, posing substantial hazard and risk to the approximately four million annual visitors to Yosemite National Park. Rock falls in Yosemite Valley over the past few decades have damaged structures and caused injuries within developed regions located on or adjacent to talus slopes highlighting the need for additional investigations into rock-fall hazard and risk. This assessment builds upon previous investigations of rock-fall hazard and risk in Yosemite Valley and focuses on hazard and risk to structures posed by relatively frequent fragmental-type rock falls as large as approximately 100,000 (cubic meters) in volume.

California↗

USGS2014

Detecting thermally driven cyclic deformation of an exfoliation sheet with lidar and radar

Rock falls from steep, exfoliating cliffs are common in many landscapes. Of the many mechanisms known to trigger rock falls, thermally driven deformation is among the least quantified, despite potentially being a prevalent trigger due to its occurrence at all times of year. Here we present the results of a field-based monitoring program using instrumentation, ground-based lidar, and ground-based radar to investigate the process of thermally driven deformation of an exfoliation sheet, and the ability of remote sensing tools to capture cyclic expansion and contraction patterns. Our results indicate that thermally driven exfoliation occurs on diurnal cycles and can be measured at the submillimeter to centimeter scale using high-resolution strain gauges, short-range (2 km) radar interfer-ometry.

Conference Paper↗