Geology ReportsSearch

Geology topics

Glen E. Cushing

Publications and source records attributed to Glen E. Cushing.

14 recordsLinked to original sources

U.S. Geological Survey Karst Interest Group proceedings, Nashville, Tennessee, October 22-24, 2024

Karst hydrogeologic systems represent challenging and unique conditions to scientists studying groundwater flow and contaminant transport. Karst terrains are characterized by distinct and beautiful landscapes, caverns, and springs, and many of the exceptional karst areas are designated as national or state parks. The range and complexity of landforms and groundwater flow systems associated with karst terrains are enormous, perhaps more than any other aquifer type. The U.S. Geological Survey (USGS) Karst Interest Group (KIG), formed in 2000, is a loosely knit, grassroots organization of USGS and non-USGS scientists and researchers devoted to fostering better communication among scientists working on, or interested in, karst aquifers. The primary mission of the KIG is to encourage and support interdisciplinary collaboration and technology transfer among scientists working in karst areas. To accomplish its mission, the KIG has organized a series of workshops. To date (2024), nine KIG workshops, including the workshop documented in this report, have been held. The abstracts and extended abstracts provide a snapshot in time of past and current karst related studies. The USGS Water Availability and Use Science Program funded the workshop and proceedings. The planning committee for the ninth workshop includes Thomas D. Byl (USGS and Tennessee State University), Allan K. Clark (USGS), Laura M. DeMott (USGS), Eve L. Kuniansky (USGS, Emeritus), Benjamin V. Miller (USGS), and Lawrence E. Spangler (USGS, Emeritus). The workshop proceedings are edited by Eve L. Kuniansky and Lawrence E. Spangler. The field trip guide was produced by Benjamin V. Miller and Brian Ham (Tennessee Department of Environment and Conservation) and included in the proceedings from the KIG’s 2021 virtual workshop to be used on the optional field trip held on Thursday, October 24, 2024.

Open-File Report

Planetary caves: A Solar System view of processes and products

We provide the first solar system wide compendium of speleogenic processes and products. An examination of 15 solar system bodies revealed that six cave-forming processes occur beyond Earth including volcanic (cryo and magmatic), fracturing (tectonic and impact melt), dissolution, sublimation, suffusion, and landslides. Although no caves (i.e., confirmed entrances with associated linear passages) have been confirmed, 3,545 SAPs (subsurface access points) have been identified on 11 planetary bodies and the potential for speleogenic processes (and thus SAPs) was observed on an additional four planetary bodies. The bulk of our knowledge on extraterrestrial SAPs is based upon global databases for the Moon and Mars, which are bodies for which high-resolution imagery and other data are available. To further characterize most of the features beyond the Moon and Mars, acquisition (preferably global coverage) and subsequent analysis of high-resolution imagery will be required. The next few decades hold considerable promise for identifying and potentially characterizing caves across the solar system.

JGR Planets

Fundamental science and engineering questions in planetary cave exploration

Nearly half a century ago, two papers postulated the likelihood of lunar lava tube caves using mathematical models. Today, armed with an array of orbiting and fly-by satellites and survey instrumentation, we have now acquired cave data across our solar system—including the identification of potential cave entrances on the Moon, Mars, and at least six other planetary bodies. These discoveries gave rise to the study of planetary caves. To help advance this field, we leveraged the expertise of an interdisciplinary group to identify a strategy to explore caves beyond Earth. Focusing primarily on astrobiology, the cave environment, geology, robotics, instrumentation, and human exploration, our goal was to produce a framework to guide this subdiscipline through at least the next decade. To do this, we first assembled a list of 198 science and engineering questions. Then, through a series of social surveys, 114 scientists and engineers winnowed down the list to the top 53 highest priority questions. This exercise resulted in identifying emerging and crucial research areas that require robust development to ultimately support a robotic mission to a planetary cave—principally the Moon and/or Mars. With the necessary financial investment and institutional support, the research and technological development required to achieve these necessary advancements over the next decade are attainable. Subsequently, we will be positioned to robotically examine lunar caves and search for evidence of life within martian caves; in turn, this will set the stage for human exploration and potential habitation of both the lunar and martian subsurface.

JGR Planets

Martian gully activity and the gully sediment transport system

The formation process for Martian gullies is a critical unknown for understanding recent climate conditions. Leading hypotheses include formation by snowmelt in a past climate, or formation via currently active CO 2 frost processes. This paper presents an expanded catalog of >300 recent flows in gullies. The results indicate that sediment transport in current gully flows moves the full range of materials needed for gully formation. New flows are more likely to transport boulders in gullies that have pre-existing boulder-covered aprons, indicating that current flows are transporting the same materials required for gully formation overall. The distribution of gully activity frequencies can be described by a power law and indicates that the recurrence intervals for flows in individual gullies are commonly tens to hundreds of Mars years. Over the last ~300 kyr, climate variations have been modest but individual gullies have had tens to thousands of flow events. This could be sufficient to account for the entirety of gully formation in some cases, although the same processes are likely to have occurred further in the past. For any gullies that may have initiated under higher-obliquity conditions, this level of recent activity indicates that the observable morphology has been shaped by CO 2 -driven flows. These observations of sediment transport and the tempo of gully activity are consistent with gully formation entirely by CO 2 frost processes, likely with spatial and temporal variability, but with no role required for liquid water.

Icarus

A roadmap for planetary caves science and exploration

While researchers have pondered the possibility of extraterrestrial caves for more than 50 years, we have now entered the incipient phase of planetary caves exploration. Our knowledge of planetary caves varies from body to body. Earth represents the most advanced level of exploration, but many unanswered questions remain. Beyond Earth, identification of possible caves is most advanced for the Moon and Mars , with hundreds of documented candidate cave entrances and several proposed cave mission concepts. To date, the community has catalogued 2,660 SAPs on eight planetary bodies (excluding Earth) across our Solar System. Planetary caves science has the potential to significantly expand over the next decade. A potential roadmap for planetary cave research and exploration is discussed.

Nature Astronomy

Science and technology requirements to explore caves in our Solar System

We are in the incipient phase of exploring the subterranean realm of our Solar System. Planetary caves research offers interdisciplinary, cross-planetary body investigations spanning geology, climatology, astrobiology, robotics, and human use. Caves are of great importance in advancing our understanding of planetary processes and the search for life beyond Earth. Given these advances, a diverse and interdisciplinary community of planetary caves researchers has emerged. Their activities have been partially documented by a series of workshops and conferences over the last thirteen years (Titus & Boston, 2012; Wynne et al, 2016; Titus et al., 2020, submitted). These meetings brought together scientists and engineers from around the world to discuss both science needs (i.e., geology, habitability, and astrobiology), as well as engineering challenges (e.g., mobility, navigation, and communications) for cave research on other planetary bodies. It was determined at the last planetary caves conference that a goals and/or roadmap document, like those of the Assessment and Advisory Groups, was needed. This white paper is our initial conception of such an effort.

Bulletin of the AAS

Conceptual model for the removal of cold-trapped H2O ice on the Mars northern seasonal springtime polar cap

The transport of H 2 O ice along the retreating north polar seasonal CO 2 ice cap has previously been modeled and observed. Spectral observations show that H 2 O ice forms on the interior of the seasonal cap, while thermal observations show these regions to be consistent with CO 2 ice. Prior to the sublimation of the seasonal CO 2 , the observed H 2 O ice deposits are diminished—and because H 2 O ice sublimation rates are extremely slow while in direct thermal contact with CO 2 ice, an alternate removal process must be operating. We propose a model where the process of removing these H 2 O deposits starts with insolation‐induced basal sublimation of the underlying CO 2 ice. This sublimed gas would “seep” upward and into the interface between the two ices, increasing pressure until the gas pressure fractures the cold‐trapped H 2 O ice. Small fragments would be suspended while larger fragments would be pushed aside, exposing the underlying CO 2 ice.

Geophysical Research Letters

The flood lavas of Kasei Valles, Mars

Both the northern and southern arms of Kasei Valles are occupied by platy-ridged flood lavas. We have mapped these flows and examined their morphology to better understand their emplacement. The lavas were emplaced as high-flux, turbulent flows (exceeding 10 6 m 3 s −1 ). Lava in southern Kasei Valles can be traced back up onto the Tharsis rise, which is also the likely source of lavas in the northern arm. These eruptions were similar to, but somewhat smaller than, the Athabasca Valles flood lava in Elysium Planitia, with estimated volumes of > 1200 km 3 here and 5000 km 3 in Athabasca Valles. The flood lavas in both Kasei and Athabasca Valles have evidence for distal inflation as well as widespread drainage or volume loss in medial areas; this may be an important characteristic of many large, recent Martian eruptions. Despite their great size and flux, the Kasei Valles flood lavas are only a late modification to the valley system capable of only modest local erosion. The more vigorous Athabasca Valles lava may have been capable of somewhat more erosion in its smaller valley system.

Icarus

Martian cave air-movement via Helmholtz resonance

Infrasonic resonance has previously been measured in terrestrial caves by other researchers, where Helmholtz resonance has been suggested as the plausible mechanism resulting in periodic wind reversals within cave entrances. We extend this reasoning to possible Martian caves, where we examine the characteristics of four atypical pit craters (APCs) on Tharsis, suggested as candidate cave entrance locations. The results show that, for several possible cave air movement periods, we are able to infer the approximate cave volumes. The utility of inferring cave volumes for planetary cave exploration is discussed.

International Journal of Speleology

Analysis of local slopes at the InSight landing site on Mars

To evaluate the topography of the surface within the InSight candidate landing ellipses, we generated Digital Terrain Models (DTMs) at lander scales and those appropriate for entry, descent, and landing simulations, along with orthoimages of both images in each stereopair, and adirectional slope images. These products were used to assess the distribution of slopes for each candidate ellipse and terrain type in the landing site region, paying particular attention to how these slopes impact InSight landing and engineering safety, and results are reported here. Overall, this region has extremely low slopes at 1-meter baseline scales and meets the safety constraints of the InSight lander. The majority of the landing ellipse has a mean slope at 1-meter baselines of 3.2°. In addition, a mosaic of HRSC, CTX, and HiRISE DTMs within the final landing ellipse (ellipse 9) was generated to support entry, descent, and landing simulations and evaluations. Several methods were tested to generate this mosaic and the NASA Ames Stereo Pipeline program dem_mosaic produced the best results. For the HRSC-CTX-HiRISE DTM mosaic, more than 99 % of the mosaic has slopes less than 15°, and the introduction of artificially high slopes along image seams was minimized.

Space Science Reviews

Candidate cave entrances on Mars

This paper presents newly discovered candidate cave entrances into Martian near-surface lava tubes, volcano-tectonic fracture systems, and pit craters and describes their characteristics and exploration possibilities. These candidates are all collapse features that occur either intermittently along laterally continuous trench-like depressions or in the floors of sheer-walled atypical pit craters. As viewed from orbit, locations of most candidates are visibly consistent with known terrestrial features such as tube-fed lava flows, volcano-tectonic fractures, and pit craters, each of which forms by mechanisms that can produce caves. Although we cannot determine subsurface extents of the Martian features discussed here, some may continue unimpeded for many kilometers if terrestrial examples are indeed analogous. The features presented here were identified in images acquired by the Mars Odyssey's Thermal Emission Imaging System visible-wavelength camera, and by the Mars Reconnaissance Orbiter's Context Camera. Select candidates have since been targeted by the High-Resolution Imaging Science Experiment. Martian caves are promising potential sites for future human habitation and astrobiology investigations; understanding their characteristics is critical for long-term mission planning and for developing the necessary exploration technologies.

Journal of Cave and Karst Studies

MGS-TES thermal inertia study of the Arsia Mons Caldera

Temperatures of the Arsia Mons caldera floor and two nearby control areas were obtained by the Mars Global Surveyor (MGS) Thermal Emission Spectrometer (TES). These observations revealed that the Arsia Mons caldera floor exhibits thermal behavior different from the surrounding Tharsis region when compared with thermal models. Our technique compares modeled and observed data to determine best fit values of thermal inertia, layer depth, and albedo. Best fit modeled values are accurate in the two control regions, but those in the Arsia Mons' caldera are consistently either up to 15 K warmer than afternoon observations, or have albedo values that are more than two standard deviations higher than the observed mean. Models of both homogeneous and layered (such as dust over bedrock) cases were compared, with layered-cases indicating a surface layer at least thick enough to insulate itself from diurnal effects of an underlying substrate material. Because best fit models of the caldera floor poorly match observations, it is likely that the caldera floor experiences some physical process not incorporated into our thermal model. Even on Mars, Arsia Mons is an extreme environment where CO2 condenses upon the caldera floor every night, diurnal temperatures range each day by a factor of nearly 2, and annual average atmospheric pressure is only around one millibar. Here, we explore several possibilities that may explain the poor modeled fits to caldera floor and conclude that temperature dependent thermal conductivity may cause thermal inertia to vary diurnally, and this effect may be exaggerated by presence of water-ice clouds, which occur frequently above Arsia Mons.

Journal of Geophysical Research E: Planets

Joint analysis of visible and infrared images

Analysis of data combining daytime visible reflected, daytime IR emitted, and nighttime IR emitted images allows us to isolate the physical effects of topography, albedo, and thermal inertia. To a good approximation, these physical influences interact linearly so that maps showing topographic shading, albedo, and relative thermal inertia can be produced by simple algebraic manipulation of the co-registered images. The shading map resembles an airbrush, shaded relief portrayal of the surface, and can be used as the input for quantitative reconstruction of topography by photoclinometry (shape-fromshading). We demonstrate the method with imagery from the NASA 2001 Mars Odyssey Thermal Emission Imaging System (THEMIS), a dataset that could support mapping most of Mars in this way at 100 m resolution .

Photogrammetric Engineering and Remote Sensing

Preparing for THEMIS controlled global Mars mosaics

We have begun work to prepare for producing controlled 2001 Mars Odyssey THEMIS infrared (IR) and visible (VIS) global mosaics of Mars. This effort is being coordinated with colleagues from Arizona State University and on the THEMIS team who plan to address radiometric issues in making such mosaics. We are concentrating on geometric issues. Several areas of investigation are now in progress, including: a) characterizing the absolute pointing accuracy of THEMIS images; b) investigating whether automatic tie point matching algorithms could be used to provide connections between overlapping THEMIS images; c) developing algorithms to allow for the photogrammetric (bundle) adjustment of the THEMIS IR (line scanner) camera images. Our primary goal in this pilot study effort will be to make several test control THEMIS mosaics and better determine which methods could be used, which require development, and what level of effort is required, in order to make large regional or global controlled THEMIS mosaics.

Conference Paper