Geology Reports⌕ Search

Geology topics

George Plafker

Publications and source records attributed to George Plafker.

At least 37 records · Page 2Linked to original sources
USGS1998

Summary terrane, mineral deposit, and metallogenic belt maps of the Russian Far East, Alaska, and the Canadian Cordillera

This report is part of a project on the major mineral deposits, metallogenesis, and tectonics of the Russian Far East, Alaska, and the Canadian Cordillera. The project is to provide critical information for collaborators and customers on bedrock geology and geophysics, tectonics, major metalliferous mineral resources, metallogenic patterns, and crustal origin and evolution of mineralizing systems for the Russian Far East, Alaska, and the Canadian Cordillera.

Open-File Report↗
USGS1997

Crustal implications of bedrock geology along the Trans-Alaska Crustal Transect (TACT) in the Brooks Range, northern Alaska

Geologic mapping of the Trans-Alaska Crustal Transect (TACT) project along the Dalton Highway in northern Alaska indicates that the Endicott Mountains allochthon and the Hammond terrane compose a combined allochthon that was thrust northward at least 90 km in the Early Cretaceous. The basal thrust of the combined allochthon climbs up section in the hanging wall from a ductile shear zone in the south through lower Paleozoic rocks of the Hammond terrane and into Upper Devonian rocks of the Endicott Mountains allochthon at the Mount Doonerak antiform, culminating in Early Cretaceous shale in the northern foothills of the Brooks Range. Footwall rocks north of the Mount Doonerak antiform are everywhere parautochthonous Permian and Triassic shale of the North Slope terrane rather than Jurassic and Lower Cretaceous strata of the Colville Basin as shown in most other tectonic models of the central Brooks Range. Stratigraphic and structural relations suggest that this thrust was the basal detachment for Early Cretaceous deformation. Younger structures, such as the Tertiary Mount Doonerak antiform, deform the Early Cretaceous structures and are cored by thrusts that root at a depth of about 10 to 30 km along a deeper detachment than the Early Cretaceous detachment. The Brooks Range, therefore, exposes (1) an Early Cretaceous thin-skinned deformational belt developed during arc-continent collision and (2) a mainly Tertiary thick-skinned orogen that is probabty the northward continuation of the Rocky Mountains orogenic belt. A down-to-the-south zone of both ductile and brittle normal faulting along the southern margin of the Brooks Range probably formed in the mid-Cretaceous by extensional exhumation of the Early Cretaceous contractional deformation.

Journal of Geophysical Research B: Solid Earth↗
USGS1997

Introduction to special section: The Trans-Alaska Crustal Transect (TACT) across Arctic Alaska

This special section of the Journal of Geophysical Research addresses the composition and structural evolution of the lithosphere in northern Alaska. Investigations reported in this section were mainly undertaken as part of the Trans‐Alaska Crustal Transect (TACT), an integrated geological and geophysical transect of the entire Alaskan lithosphere along a north‐south corridor undertaken from 1984 to 1992 (Figure 1). The onshore segment of the transect approximately follows along the route of the trans‐Alaskan pipeline; the offshore segment extends across the continental margin in the Gulf of Alaska to the Pacific plate. The TACT line is unique in that it provides a coordinated onshore/offshore geological and geophysical traverse of the North American plate in Alaska from the active convergent Pacific margin to the passive Arctic margin of the continent.

Alaska↗
USGS1997

Digital shaded-relief image of Alaska

One of the most spectacular physiographic images of the conterminous United States, and the first to have been produced digitally, is that by Thelin and Pike ( USGS I-2206, 1991 ). The image is remarkable for its crispness of detail and for the natural appearance of the artificial land surface. Our goal has been to produce a shaded-relief image of Alaska that has the same look and feel as the Thelin and Pike image. The Alaskan image could have been produced at the same scale as its lower 48 counterpart (1:3,500,000). But by insetting the Aleutian Islands into the Gulf of Alaska, we were able to print the Alaska map at a larger scale (1:2,500,000) and about the same physical size as the Thelin and Pike image. Benefits of the 1:2,500,000 scale are (1) greater resolution of topographic features and (2) ease of reference to the U.S. Geological Survey (USGS) (1987) Alaska Map E and the statewide geologic map (Beikman, 1980), which are both 1:2,500,000 scale. Manually drawn, shaded-relief images of Alaska's land surface have long been available (for example, Department of the Interior, 1909; Raisz, 1948). The topography depicted on these early maps is mainly schematic. Maps showing topographic contours were first available for the entire State in 1953 (USGS, 1:250,000) (J.H. Wittmann, USGS, written commun., 1996). The Alaska Map E was initially released in 1954 in both planimetric (revised in 1973 and 1987) and shaded-relief versions (revised in 1973, 1987, and 1996); topography depicted on the shaded-relief version is based on the 1:250,000-scale USGS topographic maps. Alaska Map E was later modified to include hypsometric tinting by Raven Maps and Images (1989, revised 1993) as copyrighted versions. Other shaded-relief images were produced for The National Geographic Magazine (LaGorce, 1956; 1:3,000,000) or drawn by Harrison (1970; 1:7,500,000) for The National Atlas of the United States. Recently, the State of Alaska digitally produced a shaded-relief image of Alaska at 1:2,500,000 scale (Alaska Department of Natural Resources, 1994), using the 1,000-m digital elevation data set referred to below. An important difference between our image and these previous ones is the method of reproduction: like the Thelin and Pike (1991) image, our image is a composite of halftone images that yields sharp resolution and preserves contrast. Indeed, the first impression of many viewers is that the Alaskan image and the Thelin and Pike image are composites of satellite-generated photographs rather than an artificial rendering of a digital elevation model. A shaded-relief image represents landforms in a natural fashion; that is, a viewer perceives the image as a rendering of reality. Thus a shaded-relief image is intrinsically appealing, especially in areas of spectacular relief. In addition, even subtle physiographic features that reflect geologic structures or the type of bedrock are visible. To our knowledge, some of these Alaskan features have not been depicted before and so the image should provide earth scientists with a new "look" at fundamental geologic features of Alaska.

Alaska↗
USGS1995

Block rotation in east-central Alaska: A framework for evaluating earthquake potential?

Geologic and seismic data reveal a set of parallel, active, strike-slip faults in east-central Alaska between the Denali and Tintina fault systems. The faults strike northeast to north-northeast, at a high angle to the bounding dextral fault systems, and exhibit sinistral slip. We hypothesize that this set of faults divides the crust into long blocks that are rotating clockwise in response to northerly compression resulting from Pacific–North American plate convergence. We suggest that these faults have produced most of the large historical earthquakes in east-central Alaska between the Alaska Range and the Yukon River.

Geology↗
USGS1995

Earthquakes in Alaska

Earthquake risk is high in much of the southern half of Alaska, but it is not the same everywhere. This map shows the overall geologic setting in Alaska that produces earthquakes. The Pacific plate (darker blue) is sliding northwestward past southeastern Alaska and then dives beneath the North American plate (light blue, green, and brown) in southern Alaska, the Alaska Peninsula, and the Aleutian Islands. Most earthquakes are produced where these two plates come into contact and slide past each other. Major earthquakes also occur throughout much of interior Alaska as a result of collision of a piece of crust with the southern margin.

Alaska↗
USGS1994

Circum-North Pacific tectonostratigraphic terrane map

The companion tectonostratigraphic terrane and overlap assemblage of map the Circum-North Pacific presents a modern description of the major geologic and tectonic units of the region. The map illustrates both the onshore terranes and overlap volcanic assemblages of the region, and the major offshore geologic features. The map is the first collaborative compilation of the geology of the region at a scale of 1:5,000,000 by geologists of the Russian Far East, Japanese, Alaskan, Canadian, and U.S.A. Pacific Northwest. The map is designed to be a source of geologic information for all scientists interested in the region, and is designed to be used for several purposes, including regional tectonic analyses, mineral resource and metallogenic analyses (Nokleberg and others, 1993, 1994a), petroleum analyses, neotectonic analyses, and analyses of seismic hazards and volcanic hazards. This text contains an introduction, tectonic definitions, acknowledgments, descriptions of postaccretion stratified rock units, descriptions and stratigraphic columns for tectonostratigraphic terranes in onshore areas, and references for the companion map (Sheets 1 to 5). This map is the result of extensive geologic mapping and associated tectonic studies in the Russian Far East, Hokkaido Island of Japan, Alaska, the Canadian Cordillera, and the U.S.A. Pacific Northwest in the last few decades. Geologic mapping suggests that most of this region can be interpreted as a collage of fault-bounded tectonostratigraphic terranes that were accreted onto continental margins around the Circum- . orth Pacific mainly during the Mesozoic and Cenozoic (Fujita and ewberry, 1983; 1987; Parfenov, 1984, 1991; Howell, 1985; Watson and Fujita, 1985; Parfenov and Natal'in, 1984; Jones and others. 1987; Monger and Berg, 1987, Fujita and Cook. 1990; Zonenshain and others. 1990; Natal'in, 1991, 1993; Moore and others, 1992; Silberling and others, 1992; Nokleberg and others. 1992, 1993, 1994a; Parfenov and others. 1993; Plaflcer and Berg, 1994; Tabor, 1994). This map is the result of extensive geologic mapping and associated tectonic studies in the Russian Far East, Hokkaido Island of Japan, Alaska, the Canadian Cordillera, and the U.S.A. Pacific Northwest in the last few decades. Geologic mapping suggests that most of this region can be interpreted as a collage of fault-bounded tectonostratigraphic terranes that were accreted onto continental margins around the Circum- . orth Pacific mainly during the Mesozoic and Cenozoic (Fujita and ewberry, 1983; 1987; Parfenov, 1984, 1991; Howell, 1985; Watson and Fujita, 1985; Parfenov and Natal'in, 1984; Jones and others. 1987; Monger and Berg, 1987, Fujita and Cook. 1990; Zonenshain and others. 1990; Natal'in, 1991, 1993; Moore and others, 1992; Silberling and others, 1992; Nokleberg and others. 1992, 1993, 1994a; Parfenov and others. 1993; Plaflcer and Berg, 1994; Tabor, 1994). On the companion map and in the descriptions bel?w· terranes are interpreted according to inferred tectonic environments. These environments are (I) cratonai; (2) passive continental margin; (3) metamorphosed continental margin; (4) continental-margin arc; (5) island arc; (6) oceanic crust, seamount, and ophiolite; (7) accretionary wedge and subduction zone: (8) turbidite basin; and (9) metamorphic for terranes that are too highly-deformed and metamorphosed to de~ermine the original tectonic environment. For terranes with complex geologic histories, the chosen color indicates the tectonic environment most prevalent during this history of the terrane. The tectonic environments inf~rred for igneous rocks are both temporal and genetic. The temporal environments are preaccretion and postaccretion. The genetic environments are subduction-related, rift-related, and collisional (anatectic)- related. In addition to terranes, the map also depicts postaccretion units that include: (I) Cenozoic and Mesozoic overlap assemblages of sedimentary and volcanic rocks that are deposited across two or more terranes that formed generally after accretion of most terranes in the region; (2) Cenozoic and Mesozoic basinal deposits that occur within a terrane or on the craton; (3) plutonic rocks. The postaccretion igneous units are identified by age-lithologic abbreviations and by name. These overlap assemblages and basinal deposits formed mainly during sedimentation and magmatism that occurred after accretion of terranes to each other or to a continental margin. Overlap assemblages provide minimum ages on the timing of accretion of terranes. Some Cenozoic and Mesozoic overlap assemblages and basinal deposits, as well as fragments of terranes, are extensively offset by movement along postaccretion faults. In addition, in onshore areas, the map depicts major preaccretion plutonic rocks that are limited to individual terranes. and in offshore areas. the map depicts major oceanic plates,-ocean floor magnetic lineations. oceanic spreading ridges, and seamounts. The map consists of five sheets. Sheets I and 2 depict, at a scale of I :5.000.000. the tectonostratigraphic terranes. preaccretion plutonic rocks, and postaccretion Cenozoic and Mesozoic overlap sedimentary, volcanic. and plutonic assemblages, and basinal deposits for the Circum- orth Pacific including the Russian Far East, northern Hokkaido Island of Japan, Alaska. the Canadian Cordillera, part of the U.S.A. Pacific Northwest. and adjacent offshore areas. Sheet 3 provides the list of map units for Sheets I and 2. Sheet 4 is a index map showing generalized onshore terranes and overlap assemblages for onshore parts of the Circum-North Pacific at a scale of I: I 0,000,000. Sheet 4 is a guide to the more complicated onshore features depicted on Sheets I and 2. Sheet 5 is an index map showing the major geographic regions for the Circum-North Pacific. Significant differences exist between the representation of onshore and offshore geology on Sheets I and 2. These are: (I) compared to the onshore part of the map, the offshore part is depicted in a more schematic fashion because of more limited data and because the offshore terranes and early Cenozoic and older overlap assemblages generally are obscured by extensive late Cenozoic sedimentary cover that is not shown unless thicker than two kilometers; (2) marginal contacts of offshore Cenozoic and Cretaceous sedimentary basins do not match contacts of onshore Cenozoic and Cretaceous sedimentary units because offshore basins are limited to those regions with sediment thicknesses greater than two kilometers; (3) stratigraphic columns, included at the end of this explanation. are provided only for onshore terranes because the geology of offshore terranes is generally less well-known; and (4) for simplicity, the major onshore Cenozoic sedimentary basins are generally not defined and described separately because the onshore part of the map is designed to emphasize terranes and overlap volcanic assemblages that are crucial for both for tectonic and metallogenic analyses published elsewhere (Nokleberg and others, 1993, 1994a). Several key geologic sources were used in the compilation of the map. For Alaska. the basic outcrop pattern for the map is from Beikman (1980), Gehrels and Berg (1992, 1994). Barker and others ( 1994). Brew (1994), and Moli-Stalcup and others ( 1994b). The distribution of terranes is from Jones and others (1987) and Monger and Berg (1987), with modification by Grantz and other (1991 ). Worall (199 1 ), okleberg and others (1993, 1994a), the cited references, and the Alaskan co-authors of this report. For the Canadian Cordillera. the basic outcrop pattern is from Monger and Berg ( 1987), Wheeler and other (1988). and Wheeler and McFeeley ( 1991) with modifications by the Canadian authors. For the northern part of the Russian Far East. the basic outcrop pattern is from So unov (1985) with modifications by the Russian authors. For the outhern part of the Russian Far East, the basic outcrop pattern is from Krasny (1991) and Bazhanov and Oleinik ( 1986) with modification by the Russian authors. The Russian Far East part of the map is the first attempt to define and delineate terranes in that region. In their compilation. the Russian authors utilized the methodology of U.S.A. and Canadian geologists. Because this map is the first attempt to display the terranes. Cenozoic and Mesozoic overlap assemblages. basinal deposit , and plutonic belts of the Russian Far East. the Russian author will appreciate constructive sugge tions for improving the map.

Open-File Report↗
USGS1993

Distribution, facies, ages, and proposed tectonic associations of regionally metamorphosed rocks in east- and south-central Alaska

Most of the exposed bedrock in east- and south-central Alaska has been regionally metamorphosed and deformed during Mesozoic and early Cenozoic time. All the regionally metamorphosed rocks are assigned to metamorphic-facies units on the basis of their temperature and pressure conditions and metamorphic age. North of the McKinley and Denali faults, the crystalline rocks of the Yukon- Tanana upland and central Alaska Range compose a sequence of dynamothermally metamorphosed Paleozoic and older(?) metasedimentary rocks and metamorphosed products of a Devonian and Mississippian continental-margin magmatic arc. This sequence was extensively intruded by postmetamorphic mid-Cretaceous and younger granitoids. Many metamorphic-unit boundaries in the Yukon-Tanana upland are low-angle faults that juxtapose units of differing metamorphic grade, which indicates that metamorphism predated final emplacement of the fault-bounded units. In some places, the relation of metamorphic grade across a fault is best explained by contractional faulting; in other places, it is suggestive of extensional faulting. Near the United States-Canadian border in the central Yukon- Tanana upland, metamorphism, plutonism, and thrusting occurred during a latest Triassic and Early Jurassic event that presumably resulted from the accretion of a terrane that had affinities to the Stikinia terrane onto the continental margin of North America. Elsewhere in the Yukon-Tanana upland, metamorphic rocks give predominantly late Early Cretaceous isotopic ages. These ages are interpreted to date either the timing of a subsequent Early Cretaceous episode of crustal thickening and metamorphism or, assuming that these other areas were also originally heated during the latest Triassic to Early Jurassic and remained buried, the timing of their uplift and cooling. This uplift and cooling may have resulted from extension. South of the McKinley and Denali faults and north of the Border Ranges fault system, medium-grade metamorphism across much of the southern Peninsular and Wrangellia terranes was early to synkinematic with the intrusion of tonalitic and granodioritic plutons of primarily Early and Middle Jurassic age in the Peninsular terrane and Late Jurassic age in the Wrangellia terrane. Areas metamorphosed during the Jurassic episode that crop out near the Border Ranges fault system were subsequently retrograded and deformed in Cretaceous and early Tertiary time during accretion of younger units to the south. North of the Jurassic metamorphic and plutonic complex, low-grade metamorphism affected the rest of the Wrangellia terrane sometime during Jurassic and (or) Cretaceous time. North of the Wrangellia terrane and immediately south of the McKinley and Denali faults, flyschoid rocks, which were deposited within a basin that separated the Wrangellia terrane from the western margin of North America, form a northeastward-tapering wedge. Within the western half of the wedge, flysch and structurally interleaved tectonic fragments were highly deformed and weakly metamorphosed; much of the metamorphism and deformation probably occurred sometime during mid- to Late Cretaceous time. In the eastern half of the wedge, flyschoid rocks form an intermediate-pressure Barrovian sequence (Maclaren metamorphic belt). Metamorphism of the Maclaren metamorphic belt was synkinematic with the Late Cretaceous to earliest Tertiary intrusion of foliated plutons of intermediate composition. Isotopic data suggest metamorphism extended into the early Tertiary and was accompanied by rapid uplift and cooling. Low- to medium-grade metamorphism throughout the wedge was probably associated with the accretion of the outboard Wrangellia terrane, as has been proposed for the Maclaren metamorphic belt. South of the Border Ranges fault system lie variably metamorphosed sequences of oceanic rocks that comprise the successively accreted Chugach, Yakutat, Ghost Rocks, and Prince William terranes. The Chugach terrane consists of three successively accreted sequences of differing metamorphic histories. Metamorphism in all the sequences was associated with north-directed underthrusting beneath either the combined Peninsular-Wrangellia terrane or the older and inner parts of the Chugach terrane. These sequences, from innermost to outermost are: (1) intermediate- to highpressure, transitional greenschist- to blueschist-facies metabasalt and metasedimentary rocks that were metamorphosed during the Early and Middle Jurassic; (2) prehnite-pumpellyite-facies melange that was metamorphosed sometime during the Jurassic and Cretaceous; and (3) low-pressure prehnite-pumpellyite- or greenschist- facies flysch and metavolcanic rocks that were initially metamorphosed during latest Cretaceous to early Tertiary time and, in the eastern Chugach Mountains, were subsequently overprinted by low-pressure amphibolite-facies metamorphism that accompanied widespread intrusion during Eocene time. A similar low-pressure-facies series also developed within melange and flysch of the Yakutat terrane; these rocks are also intruded by Eocene plutons and are correlated with similar rocks of the Chugach terrane. Seaward of the Chugach terrane are the strongly deformed but weakly metamorphosed (prehnite-pumpellyite-facies) deep-sea metasedimentary rocks and oceanic metavolcanic rocks of the Ghost Rocks and Prince William terranes. Metamorphism and deformation occurred during underthrusting of these terranes beneath the Chugach terrane in early Tertiary time and predated, perhaps by very little, intrusion by early Tertiary granitoids.

Alaska↗
USGS1992

The Alaska Mineral Resource Assessment Program: Background information to accompany geologic and mineral-resource maps of the Cordova and Middleton Island quadrangles, southern Alaska

This report summarizes recent results of integrated geological, geochemical, and geophysical field and laboratory studies conducted by the U.S. Geological Survey in the Cordova and Middleton Island 1°x3° quadrangles of coastal southern Alaska. Published open-file reports and maps accompanied by descriptive and interpretative texts, tables, diagrams, and pertinent references provide background information for a mineral-resource assessment of the two quadrangles. Mines in the Cordova and Middleton Island quadrangles produced copper and byproduct gold and silver in the first three decades of the 20th century. The quadrangles may contain potentially significant undiscovered resources of precious and base metals (gold, silver, copper, zinc, and lead) in veins and massive sulfide deposits hosted by Cretaceous and Paleogene sedimentary and volcanic rocks. Resources of manganese also may be present in the Paleogene rocks; uranium resources may be present in Eocene granitic rocks; and placer gold may be present in beach sands near the mouth of the Copper River, in alluvial sands within the canyons of the Copper River, and in smaller alluvial deposits underlain by rocks of the Valdez Group. Significant coal resources are present in the Bering River area, but difficult access and structural complexities have discouraged development. Investigation of numerous oil and gas seeps near Katalla in the eastern part of the area led to the discovery of a small, shallow field from which oil was produced between 1902 and 1933. The field has been inactive since, and subsequent exploration and drilling onshore near Katalla in the 1960's and offshore near Middleton Island on the outer continental shelf in the 1970's and 1980's was not successful.

Alaska↗
USGS1989

Back-arc with frontal-arc component origin of Triassic Karmutsen basalt, British Columbia, Canada

The largely basaltic, ???4.5-6.2-km-thick, Middle to Upper Triassic Karmutsen Formation is a prominent part of the Wrangellian sequence. Twelve analyses of major and minor elements of representative samples of pillowed and massive basalt flows and sills from Queen Charlotte and Vancouver Islands are ferrotholeiites that show a range of 10.2-3.8% MgO (as normalized, H2O- and CO2-free) and related increases in TiO2 (1.0-2.5%), Zr (43-147 ppm) and Nb (5-16 ppm). Other elemental abundances are not related simply to MgO: distinct groupings are evident in Al2O3, Na2O and Cr, but considerable scatter is present in FeO* (FeO + 0.9Fe2O3) and CaO. Some of the variation is attributed to alteration during low-rank metamorphism or by seawater - including variation of Ba, Rb, Sr and Cu, but high-field-strength elements (Sc, Ti, Y, Zr and Nb) as well as Cr, Ni, Cu and rare-earth elements (REE's) were relatively immobile. REE's show chondrite-normalized patterns ranging from light-REE depleted to moderately light-REE enriched. On eleven discriminant plots these analyses fall largely into or across fields of within-plate basalt (WIP), normal or enriched mid-ocean-ridge tholeiite (MORB) and island-arc tholeiite (IAT). Karmutsen basalts are chemically identical to the stratigraphically equivalent Nikolai Greenstone of southern Alaska and Yukon Territory. These data and the fact that the Karmutsen rests on Sicker Group island-arc rocks of Paleozoic age suggest to us that: 1. (1) the basal arc, after minor carbonate-shale deposition, underwent near-axial back-arc rifting (as, e.g., the Mariana arc rifted at different times); 2. (2) the Karmutsen basalts were erupted along this rift or basin as "arc-rift" tholeiitite; and 3. (3) after subsequent deposition of carbonates and other rocks, and Jurassic magmatism, a large fragment of this basalt-sediment-covered island arc was accreted to North America as Wrangellia. The major- and minor-elemental abundances of Karmutsen basalt is modeled by first mixing primitive arc magma with enriched basaltic liquid derived either from garnet peridotite or metasomatized mantle, followed by fractionation of olivine, pyroxenes, plagioclase and spinel. ?? 1989.

Chemical Geology↗