Geology Reports⌕ Search

Geology topics

Garth E. Graham

Publications and source records attributed to Garth E. Graham.

At least 37 records · Page 2Linked to original sources

Data-driven prospectivity modelling of sediment-hosted mineral systems

Mississippi Valley-type (MVT) and clastic-dominated (CD) deposits are important sources for Zn, Pb, Ag, and Cd as well as the critical elements Ga, Ge, In, and Sb. However, mapping the drivers, sources, pathways, and traps of MVT and CD deposits within the much larger and mostly unmineralized sedimentary basins remain some of the least understood aspects of these mineral systems. Herein we address those knowledge gaps by integrating public geoscience datasets from Canada, the United States of America, and Australia using a discrete global grid system to map the continent-scale footprints of MVT and CD deposits.

Conference Paper↗

GIS-based identification of areas that have resource potential for sediment-hosted Pb-Zn deposits in Alaska

A state-wide Geographic Information System analysis was conducted to assess prospectivity for lead (Pb) and zinc (Zn) in sediment-hosted deposits in Alaska. The datasets that were utilized include publicly available geospatial datasets of lithologic, geochemical, and mineral occurrence data. Key characteristics of Pb-Zn deposits were identified in available datasets and scored with respect to relative importance. To evaluate resource potential, drainage basins of the smallest size were chosen, each of which covers approximately 100 square kilometers (km 2 ). Drainage basins are the most logical and efficient unit for evaluation because the most regionally robust dataset comes from stream sediment geochemistry. Sediment-hosted Pb-Zn deposits in Alaska include those contained in carbonate rocks (similar to Mississippi Valley Type or MVT deposits) and those contained in clastic-dominated (CD) sequences (CD Pb-Zn), historically referred to as SEDEX (sedimentary exhalative). The latter include the deposits currently being mined in the Red Dog district in the western Brooks Range. Host rocks for the two subtypes are distinct: carbonate versus fine-grained clastic rocks for CD Pb-Zn deposits. However, there are exceptions: some CD Pb-Zn deposits are hosted in carbonate layers within a thick clastic-dominated rock sequence. The statewide geologic map database contains units that commonly include mixed carbonate-clastic sequences that cannot be subdivided. The most significant difference between the two deposit types is their respective depositional environments and tectonic settings, but at the reconnaissance level of mapping in most areas of the state, these distinctions are not possible. Furthermore, nearly all critical geochemical parameters (silver [Ag], barium [Ba], Pb, Zn) are common to both types, and therefore it was not possible to do separate assessments for carbonate-hosted and CD Pb-Zn deposits. Areas identified that have moderate to high potential for sediment-hosted Pb-Zn deposits include the (1) western and central Brooks Range, referred to in this report as the Brooks Range zinc belt; (2) Seward Peninsula (and adjacent St. Lawrence Island); (3) Farewell terrane in Interior Alaska; (4) two spatially distinct belts in east-central Alaska; and (5) the central Alaska Range. All areas contain some known deposits, and that provides credibility to the scoring process. Some hydrologic unit codes (HUCs) that have high potential for sediment-hosted Pb-Zn deposits are located adjacent to areas of known deposits and indicate the potential for expansion of known Pb-Zn districts. There are a few areas that have high potential but contain no known sediment hosted Pb-Zn occurrences, prospects, or deposits. In such areas, future investigations could be focused on better defining and constraining prospectivity with additional data.

Alaska↗

Hydrogeochemistry in the Yukon-Tanana Upland region of east-central Alaska: Possible exploration tool for porphyry-style deposits

A hydrogeochemical study using high resolution ICP-MS was undertaken at the Taurus and other porphyry Cu-Mo(-Au) occurrences and Ag-Au-Cu (+/- Pb, Zn) occurrences with epithermal-style characteristics in the Yukon-Tanana upland region of eastern Alaska. Surface water samples were collected from 30 sites on creeks that drain known deposits and occurrences and surrounding presumably unmineralized areas. Water samples for the entire ∼9 km length of McCord Creek, which drains the Taurus deposit, and those from streams draining the areas at and near the Bluff and Dennison porphyry occurrences have high conductivity values (492 to 1250 μS/cm) and consistently high concentrations of B (3-250 μg/L), Co (2.3 to 42 μg/L), Mn (339 to 4750 μg/L), Re (0.012 to 0.1 μg/L), and SO 4 2- (>200 mg/L), all of which are well above the median value for this data set and significantly greater than concentrations in water samples from the unmineralized areas. These are the best pathfinder elements specifically for porphyry style deposits because most of them are not anomalous in waters near epithermal occurrences. Copper concentrations are high (up to 115 μg/L) in some low-pH water samples from McCord Creek and drainages around Bluff, and a few near neutral pH waters have high molybdenum (>1 μg/L), but neither element is consistently anomalous in close vicinity to the porphyry occurrences, possibly due to a metal-poor, sulfide-poor leached cap (average of ∼50 m) that overlies supergene and hypogene mineralized zones and is the dominant rock at surface. High concentrations of Bi and/or As occur in many waters associated with mineralized areas, particularly the Bluff and Dennison occurrences. In general, the element associations related to porphyry deposits reflect the deposit mineralogy, as well as size of the footprint related to alteration and mineralization.

Alaska↗

Tectonic and magmatic controls on the metallogenesis of porphyry deposits in Alaska

Porphyry Cu and Mo deposits and occurrences are found throughout Alaska; they formed episodically during repeated subduction and arc-continent collisions spanning the Silurian to Quaternary. Porphyry systems occur in continental-margin and island arcs, which are broadly grouped into pre-accretionary or post-accretionary arcs. Pre-Mesozoic occurrences formed in continental or island arcs prior to accretion onto the margin of North America, whereas Mesozoic and younger systems formed in arcs that developed after terrane fragments were accreted to the margin of North America. As a result, older porphyry systems are typically in the interior and northern metallogenic belts, whereas the younger porphyry systems are predominantly found in the southern third of the state, closer to the modern continental margin. Alaska porphyry formation peaked in the mid-Cretaceous and continued through the Late Cretaceous to Tertiary, in association with continental-margin arcs extending from the eastern interior, into southwest Alaska and along the Alaska Peninsula and Aleutian Islands. Porphyry system formation is not generally recognized in the Early Cretaceous, Triassic, or early Paleozoic – time periods that coincide with continental collisional events or extension. Relatively few pre-accretionary porphyry systems are documented in more deeply exhumed arc segments due to low preservation potential in areas of rapid or repeated bedrock uplift and associated erosion that occurred during later tectonic events. Significant diversity is observed in porphyry occurrences across the state and even within the same region. Occurrences form in association with arc-related intrusions or intrusive complexes, that range in composition from diorite to syenite, but are commonly monzonitic to granitic. Some porphyry occurrences are associated with alkaline intrusive belts that exhibit a stronger crustal contribution to magmatic sources. Intrusions associated with porphyry formation in Alaska are commonly moderately oxidized, however, a distinct group of porphyry systems are associated with more-reduced magmas. Hydrothermal alteration described at many occurrences exhibits zoning from proximal potassic alteration to typically peripheral and(or) later sericitic alteration, that is flanked by large zones of propylitic alteration. Diversity in alteration is observed where sodic and sodic-calcic alteration is present, commonly in more-enigmatic deposits, such as Island Mountain and Chicken Mountain. Advanced argillic alteration is rare, but present in notable examples, such as the Pebble porphyry Cu(-Au-Mo) deposit. Sulfide mineralization is characterized by pyrite, chalcopyrite, molybdenite, and rare bornite hosted in veinlets, veins and disseminations in wallrocks and causative intrusions. Some porphyry systems contain abundant pyrrhotite and(or) arsenopyrite in the mineral assemblages. Systems that exhibit bornite-bearing assemblages containing abundant molybdenite are commonly arsenic- and gold-poor and tend to be associated with more oxidized arc magmas. In contrast, those systems that are pyrrhotite and(or) arsenopyrite dominant tend to be gold, arsenic, and bismuth bearing, and are commonly associated with more-reduced magmas. Exploration for porphyry occurrences in Alaska has experienced a resurgence and currently constitutes about 20% of exploration dollars in the state. Many systems lack complete descriptions, and coupled with the cost of exploration, remain incompletely explored. Additional understanding of known occurrences combined with a framework geologic understanding of porphyry-bearing metallogenic belts will likely result in new discoveries in the future.

Alaska↗

Cretaceous to Oligocene magmatic and tectonic evolution of the western Alaska Range: Insights from U-Pb and 40Ar/39Ar geochronology

New U-Pb and 40 Ar/ 39 Ar ages integrated with geologic mapping and observations across the western Alaska Range constrain the distribution and tectonic setting of Cretaceous to Oligocene magmatism along an evolving accretionary plate margin in south-central Alaska. These rocks were emplaced across basement domains that include Neoproterozoic to Jurassic carbonate and siliciclastic strata of the Farewell terrane, Triassic and Jurassic plutonic and volcanic rocks of the Peninsular terrane, and Jurassic and Cretaceous siliciclastic strata of the Kahiltna assemblage. Plutonic rocks of different ages also host economic mineralization including intrusion-related Au, porphyry Cu-Mo-Au, polymetallic veins and skarns, and peralkaline intrusion-related rare-earth elements. The oldest intrusive suites were emplaced ca. 104–80 Ma into the Peninsular terrane only prior to final accretion. Deformation of the northern Kahiltna succession and underlying Farewell terrane occurred at ca. 97 Ma, and more widespread deformation ca. 80 Ma involved south-vergent folding and thrusting of the Kahiltna assemblage that records collisional accretion of the Peninsular-Wrangellia terrane and juxtaposition of sediment wedges formed on the inboard and outboard terranes. More widespread magmatism ca. 75–55 Ma occurred in two general pulses, each having distinct styles of localized deformation. Circa 75–65 Ma plutons were emplaced in a transpressional setting and stitch the accreted Peninsular and Wrangellia terranes to the Farewell terrane. Circa 65–55 Ma magmatism occurred across the entire range and extends for more than 200 km inboard from the inferred position of the continental margin. The Paleocene plutonic suite generally reflects shallower emplacement depths relative to older suites and is associated with more abundant andesitic to rhyolitic volcanic rocks. Deformation ca. 58–56 Ma was concentrated along two high-strain zones, the most prominent of which is 1 km wide, strikes east-northeast, and accommodated dextral oblique motion. Emplacement of widespread intermediate to mafic dikes ca. 59–51 Ma occurred before a notable magmatic lull from ca. 51–44 Ma reflecting a late Paleocene to early Eocene slab window. Magmatism resumed ca. 44 Ma, recording the transition from slab window to renewed subduction that formed the Aleutian-Meshik arc to the southwest. In the western Alaska Range, Eocene magmatism included emplacement of the elongate north-south Merrill Pass pluton and large volumes of ca. 44–37 Ma andesitic flows, tuffs, and lahar deposits. Finally, a latest Eocene to Oligocene magmatic pulse involved emplacement of a compositionally variable but spatially concentrated suite of magmas ranging from gabbro to peralkaline granite ca. 35–26 Ma, followed by waning magmatism that coincided with initiation of Yakutat shallow-slab subduction. Cretaceous to Oligocene magmatism throughout the western Alaska Range collectively records terrane accretion, translation, and integration together with evolving subduction dynamics that have shaped the southern Alaska margin since the middle Mesozoic.

Alaska↗

Application of imaging spectroscopy for mineral exploration in Alaska: A study over porphyry Cu deposits in the eastern Alaska Range

The U.S. Geological Survey tested the utility of imaging spectroscopy (also referred to as hyperspectral remote sensing) as an aid to regional mineral exploration efforts in remote parts of Alaska. Airborne imaging spectrometer data were collected in 2014 over unmined porphyry Cu deposits in the eastern Alaska Range using the HyMap™ sensor. Maps of the distributions of predominant minerals, made by matching reflectance signatures in the remotely sensed data to reference spectra in the shortwave infrared region, do not uniquely discriminate individual rock units. However, they do highlight hydrothermal alteration associated with porphyry deposits and prospects hosted mostly within the Nabesna pluton. In and around porphyry Cu deposits at Orange Hill and Bond Creek, unique spectral signatures are related to variations in chlorite and white mica abundance and their chemical composition. This is best revealed in the longer-wavelength 2,200-nm Al-OH absorption feature positions in pixels spectrally dominated by white mica proximal to porphyry deposits. Similar spectral signatures of chlorite and white mica wavelength positions were also recognized away from the porphyry deposits; follow-up sampling identified these satellite areas to also contain Cu-Mo-Au mineralized rock. Our study confirms that airborne imaging spectroscopy has application for regional mineral exploration in exposed mountainous terrain in Alaska.

Alaska↗

Multiscale hyperspectral imaging of the Orange Hill Porphyry Copper Deposit, Alaska, USA, with laboratory-, field-, and aircraft-based imaging spectrometers

In the past decade, use of hyperspectral imaging (imaging spectroscopy) for mineral exploration and mining operations has been increasing at different spatial scales. In this paper, we focus on recent trends in applying imaging spectrometer data to: 1) airborne imaging of high latitude deposits, 2) field-based imaging of outcrops, and 3) laboratory-level imaging of geologic samples. Comparing mineral information derived from imaging spectrometer data acquired at these three scales in Alaska in areas of exposed porphyry Cu-Au-Mo deposits, Orange Hill and Bond Creek, we find notable consistency in identifications of spectrally predominant minerals, including white mica, chlorite, clays, and gypsum. Variations in the wavelength position of white mica 2200 nm Al-OH absorption seen at the airborne level are echoed by finerscale field and laboratory imaging, with wavelength positions spanning the 2199 to 2207 nm range. The longerwavelength micas associated with porphyry formation are more phengitic in composition, and thus distinct from mica in plutonic and volcanic arc rocks not affected by magmatic-hydrothermal fluids. The hillside imagery, collected on a cloudy day that would have precluded aircraft survey, gave comparable result to airborne and laboratory data, indicating field-based imaging spectroscopy can be a feasible alternative to airborne survey for accessible targets. Direct spectral observation of molybdenite in rocks collected from the Orange Hill deposit demonstratesthat additional important mineral information can be revealed with laboratory level imaging spectroscopy that is difficult to obtain in coarser scale data, commonly due to low areal extent of target minerals. The spatial association of the clinochlore + white mica and long wavelength white mica spectral classes to multi-element Cu-Mo-Au anomalies from geochemical analyses of rocks and sediments support a causative relationship with magmatic-hydrothermal alteration. Mineral maps from the airborne data were used to guide field sampling that found additional CuMo-Au mineralized areas, which were previously unknown or unreported. The results from this study provide support for utilization of imaging spectroscopy for assisting mineral exploration in other portions of the state of Alaska as well as other areas at high latitudes. Imaging spectroscopy has the potential to provide targeting information for follow-up sampling and investigations, potentially reducing subsequent exploration costs.

Alaska↗

Hyperspectral surveying for mineral resources in Alaska

Alaska is a major producer of base and precious metals and has a high potential for additional undiscovered mineral resources. However, discovery is hindered by Alaska’s vast size, remoteness, and rugged terrain. New methods are needed to overcome these obstacles in order to fully evaluate Alaska’s geology and mineral resource potential. Hyperspectral surveying is one method that can be used to rapidly acquire data about the distributions of surficial materials, including different types of bedrock and ground cover. In 2014, the U.S. Geological Survey began the Alaska Hyperspectral Project to assess the applicability of this method in Alaska. The primary study area is a remote part of the eastern Alaska Range where porphyry deposits are exposed. In collaboration with the Alaska Division of Geological and Geophysical Surveys, the University of Alaska Fairbanks, and the National Park Service, the U.S. Geological Survey is collecting and analyzing hyperspectral data with the goals of enhancing geologic mapping and developing methods to identify and characterize mineral deposits elsewhere in Alaska.

Alaska↗

Geospatial compilation of results from field sample collection in support of mineral resource investigations, Western Alaska Range, Alaska, July 2013

This Data Series summarizes results from July 2013 sampling in the western Alaska Range near Mount Estelle, Alaska. The fieldwork combined in situ and camp-based spectral measurements of talus/soil and rock samples. Five rock and 48 soil samples were submitted for quantitative geochemi­cal analysis (for 55 major and trace elements), and the 48 soils samples were also analyzed by x-ray diffraction to establish mineralogy and geochemistry. The results and sample photo­graphs are presented in a geodatabase that accompanies this report. The spectral, mineralogical, and geochemical charac­terization of these samples and the sites that they represent can be used to validate existing remote-sensing datasets (for example, ASTER) and future hyperspectral studies. Empiri­cal evidence of jarosite (as identified by x-ray diffraction and spectral analysis) corresponding with gold concentrations in excess of 50 parts per billion in soil samples suggests that surficial mapping of jarosite in regional surveys may be use­ful for targeting areas of prospective gold occurrences in this sampling area.

Alaska↗

Targeting Cu–Au and Mo resources using multi-media exploration geochemistry: An example from Tyonek Quadrangle, Alaska Range, Alaska

Regional stream and pond sediment, panned concentrate, and water sampling at and around known mineral occurrences in the Tyonek quadrangle, Alaska Range, Alaska were undertaken to determine geochemical signatures in the different media. For sediment samples, two different size fractions (− 80 mesh and − 230 mesh) were analyzed. Elevated concentrations (mostly ~ 2 × median) of elements such as As, Au, Cd, Cu, Mo, Pb, and/or Zn were measured in both size fractions in streams draining known occurrences as well as from several other locations. Gold, molybdenite, arsenopyrite, and/or Cu minerals identified in panned concentrates explain some of these elevated values. Water samples from most stream, pond and seep sediment sample sites were analyzed by high-resolution ICP-MS methodology. Relative high concentrations of constituents (including Mo, Re, As, Tl, and/or Cu and/or SO 4 ) were commonly measured in waters where high metal concentrations were also measured in corresponding sediments and/or heavy mineral concentrates. However, water chemistry yielded higher contrast of upper quartile and anomalous groups relative to median values than observed in sediments. Elevated As, Mo and/or Re probably relate both to deposit mineralogy and the higher solubility of these metals (compared to that of Cu, Pb, Zn) under the predominantly oxidized and near-neutral pH conditions. Our pilot study indicates that, despite large input of snowmelt and very low absolute concentrations (μg/L), water chemistry can be useful for delineating sulfide-bearing mineral occurrences in this region.

Alaska↗

Hydrogeochemical exploration: A reconnaissance study on northeastern Seward Peninsula, Alaska

A reconnaissance hydrogeochemical study employing high-resolution/high-sensitivity inductively coupled plasma mass spectrometry analysis of stream and seep water samples ( n = 171) was conducted in an area of limited bedrock exposure on the northeastern Seward Peninsula, Alaska. Sampling was focused in drainages around four main areas—at the Anugi Pb-Zn-Ag occurrence and in streams upstream of historically and currently mined placer gold deposits in the Candle Creek, Utica, and Monument Mountain areas. The objective of the study was to determine whether distribution of elevated metal concentrations in water samples could “see” through sediment cover and provide evidence of bedrock sources for base metals and gold. Some observations include (1) elevated Ag, As, Pb, and Zn concentrations relative to the study area as a whole in stream and seep samples from over and downstream of part of the Anugi Pb-Zn-Ag prospect; (2) abrupt downstream increases in Tl and Sb ± Au concentrations coincident with the upstream termination of productive placer deposits in the Inmachuk and Old Glory Creek drainages near Utica; (3) high K, Mo, Sb, and F throughout much of the Inmachuk River drainage near Utica; and (4) elevated As ± base metals and Au at two sites along Patterson Creek near the town of Candle and three additional contiguous sites identified when an 85th percentile cut-off was employed. Molybdenum ± gold concentrations (>90th percentile) were also measured in samples from three sites on Glacier Creek near Monument Mountain. The hydrogeochemistry in some areas is consistent with limited stream-sediment data from the region, including high Pb-Zn-Ag-As concentrations associated with Anugi, as well as historical reports of arsenopyrite-bearing veins upstream of placer operations in Patterson Creek. Chemistry of samples in the Inmachuk River-Old Glory Creek area also suggest more laterally extensive stibnite- (and gold-?) bearing veining than is currently known in the Old Glory Creek drainage. Our results indicate that hydrogeochemistry can be a useful method of geochemical exploration and offer targets for follow-up rock, soil, and subsurface sampling to ascertain the presence of mineralized bedrock.

Alaska↗

Advanced Land Observing Satellite (ALOS) Phased Array Type L-Band Synthetic Aperture Radar (PALSAR) mosaic for the Kahiltna terrane, Alaska, 2007-2010

The U.S. Geological Survey (USGS) has initiated a multi-disciplinary study investigating the applicability of remote sensing technologies for geologic mapping and identification of prospective areas for base and precious metal deposits in remote parts of Alaska. The Kahiltna terrane in southwestern Alaska was selected for investigation because of its known mineral deposits and potential for additional mineral resources. An assortment of technologies is being investigated to aid in remote analysis of terrain, and includes imaging spectroscopy (hyperspectral remote sensing), high spatial resolution electro-optical imagery, and Synthetic Aperture Radar (SAR). However, there are significant challenges to applying imaging spectroscopy and electro-optical imagery technologies in this area because of the low solar angle for parts of the year, seasonal periods of darkness and snow cover, and the frequently cloudy weather that characterizes Alaska. Synthetic Aperture Radar (SAR) was selected because this technology does not rely on solar illumination and has all-weather capability. The USGS has compiled a continuous, cloud-free 12.5-meter resolution radar mosaic of SAR data of approximately 212,000 square kilometers to examine the suitability of this technology for geologic mapping. This mosaic was created from Advanced Land Observing Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR) data collected from 2007 to 2010 spanning the Kahiltna terrane and the surrounding area. Interpretation of these data may help geologists understand past geologic processes and identify areas with potential for near-surface mineral resources for further ground-based geological and geochemical investigations.

Alaska↗

Timing of ore-related magmatism in the western Alaska Range, southwestern Alaska

This report presents isotopic age data from mineralized granitic plutons in an area of the Alaska Range located approximately 200 kilometers to the west-northwest of Anchorage in southwestern Alaska. Uranium-lead isotopic data and trace element concentrations of zircons were determined for 12 samples encompassing eight plutonic bodies ranging in age from approximately 76 to 57.4 millions of years ago (Ma). Additionally, a rhenium-osmium age of molybdenite from the Miss Molly molybdenum occurrence is reported (approx. 59 Ma). All of the granitic plutons in this study host gold-, copper-, and (or) molybdenum-rich prospects. These new ages modify previous interpretations regarding the age of magmatic activity and mineralization within the study area. The new ages show that the majority of the gold-quartz vein-hosting plutons examined in this study formed in the Late Cretaceous. Further work is necessary to establish the ages of ore-mineral deposition in these deposits.

Alaska↗

Tectonic evolution and Cretaceous gold metallogenesis of southwestern Alaska

Cretaceous gold metallogenesis in southwestern Alaska comprises three distinct episodes related to the accretionary evolution of northwestern North America. The oldest mineralizing event is characterized by 112 Ma Cu-Au-Bi-Te porphyry-type(?) veining in the zoned Bonanza and adjacent plutons that intruded rocks of the Nyac terrane. Tectonic reconstructions and limited geological and geochemical data suggest that Cu-Au mineralization in the Nyac district may be related to terminal subduction during accretion of the Togiak-Koyukuk arc. The subsequent 100 to 89 Ma metallogenic event is a product of subduction-related magmatism immediately following accretion of the Peninsular-Alexander-Wrangellia superterrane and includes formation of the giant Pebble porphyry Cu-Au-Mo deposit. Pebble underwent a complex history of highly oxidized magmatism that is isotopically linked to enriched lithosphere or metasomatized mantle sources. Pebble and other porphyryrelated plutons were emplaced as a consequence of changes in plate motion and onset of dextral transpression along the continental margin to the southeast of their present-day locations. The final 75 to 65 Ma metallogenic event is regionally the most extensive. It followed a ~15-m.y.-long magmatic lull and is related to enigmatic subduction-related magmatism in the western part of the Alaska Range and the Kuskokwim basin. This event resulted in the formation of porphyry, reduced pluton-related, orogenic, and possible epithermal Au deposits. In the better-studied relatively low-relief areas of the Kuskokwim basin, many of the mineralized systems are spatially associated with ilmenite-series monzonite to quartz monzonite composite plutons that have isotopic signatures consistent with derivation from crustally contaminated mantle sources. These pluton-hosted Au deposits comprise low-sulfide stockworks, sheeted veins, and/or breccias in the cupolas of moderately differentiated intrusions that contain high Au; anomalous As, Bi, Sb, and/or Te; and have variable, but not uneconomic, Cu concentrations. In addition, Au, Sb, and/or Hg deposits hosted by competent NE-trending granite porphyry dike-sill complexes or along faults in flysch are widespread in the Kuskokwim basin. These deposits, including the giant Donlin Creek Au deposit, formed at shallow crustal levels and are classified here as epizonal orogenic Au deposits and related Hg and Sb lodes. Mesozonal orogenic Au deposits were formed along the margins of the uplifting Willow Creek pluton that is now exposed along the southern side of the Talkeetna Mountains batholith. Recent discoveries in the rugged Alaska Range comprise less well-studied porphyry Au-Cu (Whistler, Island Mountain), epithermal(?) Au (Terra), and reduced pluton-hosted Au deposits (Estelle). The cause of the broad latest Cretaceous magmatism associated with the final metallogenic event is enigmatic, but indicates widespread high heat flow possibly related to flat-slab subduction, lithospheric mantle delamination, or escape tectonics. Plutonism postdated regional folding and coincided with periods of movement along regional faults and formation of the NE-trending structural fabric. Magmatism resulted from initiation of transpressional faulting in more landward positions during oblique subduction of the Kula plate. Crustal contamination of mantle melts, either near their source or during ascent through the thick flysch of the Kuskokwim basin, produced low oxidation state magmas and controlled much of the metallogeny, particularly for those deposits that display similarities to both reduced porphyry Au-Cu deposits and, to a lesser degree, reduced intrusion-related Au systems. High heat flow also induced crustal melting and metamorphic devolatilization to form orogenic Au deposits. A transition to extension at ~60 Ma recorded elsewhere in Alaska temporally corresponds to termination of gold deposit formation in southwestern Alaska. The multiple periods of gold metallogenesis in southwestern Alaska offer a wide variety of targets for exploration within discrete parts of the region.

Society of Economic Geologists Special Publication↗

Geologic setting, sedimentary architecture, and paragenesis of the Mesoproterozoic sediment-hosted Sheep Creek Cu-Co-Ag deposit, Helena embayment, Montana

The northern margin of the Helena Embayment contains extensive syngenetic to diagenetic massive pyrite horizons that extend over 25 km along the Volcano Valley-Buttress fault zone and extend up to 8 km basinward (south) within the Mesoproterozoic Newland Formation. The Sheep Creek Cu-Co deposit occurs within a structural block along a bend in the fault system, where replacement-style chalcopyrite mineralization is spatially associated mostly with the two stratigraphically lowest massive pyrite zones. These mineralized pyritic horizons are intercalated with debris flows derived from synsedimentary movement along the Volcano Valley-Buttress fault zone. Cominco American Inc. delineated a geologic resource of 4.5 Mt at 2.5% Cu and 0.1% Co in the upper sulfide zone and 4 Mt at 4% Cu within the lower sulfide zone. More recently, Tintina Resources Inc. has delineated an inferred resource of 8.48 Mt at 2.96% Cu, 0.12% Co, and 16.4 g/t Ag in the upper sulfide zone. The more intact upper sulfide zone displays significant thickness variations along strike thought to represent formation in at least three separate subbasins. The largest accumulation of mineralized sulfide in the upper zone occurs as an N-S–trending body that thickens southward from the generally E trending Volcano Valley Fault and probably occupies a paleograben controlled by normal faults in the hanging wall of the Volcano Valley Fault. Early microcrystalline to framboidal pyrite was accompanied by abundant and local barite deposition in the upper and lower sulfide zones, respectively. The sulfide bodies underwent intense (lower sulfide zone) to localized (upper sulfide zone) recrystallization and overprinting by coarser-grained pyrite and minor marcasite that is intergrown with and replaces dolomite. Silicification and paragenetically late chalcopyrite, along with minor tennantite in the upper sulfide zone, replaces fine-grained pyrite, barite, and carbonate. The restriction of chalcopyrite to inferred synsedimentary E- and northerly trending faults and absence of definitive zonation with respect to the Laramide Volcano Valley Fault in the lower sulfide zone suggest a diagenetic age related to basin development for the Sheep Creek Cu-Co-Ag deposit.

Montana↗

Investigation of the potential for concealed base-metal mineralization at the Drenchwater Creek Zn-Pb-Ag occurrence, northern Alaska, using geology, reconnaissance geochemistry, and airborne electromagnetic geophysics

In 2005, the U.S. Geological Survey, Bureau of Land Management, and State of Alaska cooperated on an investigation of the mineral potential of a southern part of the National Petroleum Reserve in Alaska, Howard Pass quadrangle, to provide background information for future land-use decisions. The investigation incorporated an airborne electromagnetic (EM) survey covering 1,500 mi 2 (~3,900 km 2 ), including flight lines directly over the Drenchwater Creek sediment-hosted Zn-Pb-Ag occurrence, the largest known base-metal occurrence in the survey area. Samples from the mineralized outcrop and rubblecrop contain metal concentrations that can exceed 11 percent Zn+Pb, with appreciable amounts of Ag. Soil samples with anomalous Pb concentrations are distributed near the sulfide-bearing outcrops and along a >2.5 km zone comprising mudstone, shale, and volcanic rocks of the Kuna Formation. No drilling has taken place at the Drenchwater occurrence, so alternative data sources (for example, geophysics) are especially important in assessing possible indicators of mineralization. Data from the 2005 electromagnetic survey define the geophysical character of the rocks at Drenchwater and, in combination with geological and surface-geochemical data, can aid in assessing the possible shallow (up to about 50 m), subsurface lateral extent of base-metal sulfide accumulations at Drenchwater. A distinct >3-km-long electromagnetic conductive zone (observed in apparent resistivity maps) coincides with, and extends further westward than, mineralized shale outcrops and soils anomalously high in Pb concentrations within the Kuna Formation; this conductive zone may indicate sulfide-rich rock. Models of electrical resistivity with depth, generated from inversion of electromagnetic data, which provide alongflight-line conductivity-depth profiles to between 25 and 50 m below ground surface, show that the shallow subsurface conductive zone occurs in areas of known mineralized outcrops and thins to the east. Broader, more conductive rock along the western ~1 km of the geophysical anomaly does not reach ground surface. These data suggest that the Drenchwater deposit is more extensive than previously thought. The application of inversion modeling also was applied to another smaller geochemical anomaly in the Twistem Creek area. The results are inconclusive, but they suggest that there may be a local conductive zone, possibly due to sulfides.

Professional Paper↗

Regional Fluid Flow and Basin Modeling in Northern Alaska

The foothills of the Brooks Range contain an enormous accumulation of zinc (Zn) in the form of zinc sulfide and barium (Ba) in the form of barite in Carboniferous shale, chert, and mudstone. Most of the resources and reserves of Zn occur in the Red Dog deposit and others in the Red Dog district; these resources and reserves surpass those of most deposits worldwide in terms of size and grade. In addition to zinc and lead sulfides (which contain silver, Ag) and barite, correlative strata host phosphate deposits. Furthermore, prolific hydrocarbon source rocks of Carboniferous and Triassic to Early Jurassic age generated considerable amounts of petroleum that may have contributed to the world-class petroleum resources of the North Slope. Deposits of Zn-Pb-Ag or barite as large as those in the Brooks Range are very rare on a global basis and, accordingly, multiple coincident favorable factors must be invoked to explain their origins. To improve our understanding of these factors and to contribute to more effective assessments of resources in sedimentary basins of northern Alaska and throughout the world, the Mineral Resources Program and the Energy Resources Program of the U.S. Geological Survey (USGS) initiated a project that was aimed at understanding the petroleum maturation and mineralization history of parts of the Brooks Range that were previously poorly characterized. The project, titled “Regional Fluid Flow and Basin Modeling in Northern Alaska,” was undertaken in collaboration with industry, academia, and other government agencies. This Circular contains papers that describe the results of the recently completed project. The studies that are highlighted in these papers have led to a better understanding of the following: The complex sedimentary facies relationships and depositional settings and the geochemistry of the sedimentary rocks that host the deposits (sections 2 and 3). The factors responsible for formation of the barite and zinc deposits (sections 4 and 5). The geochemical indicators or exploration tools that might be used to locate other large deposits of similar character in the Red Dog district and elsewhere (section 6). The isotopic compositions of barite and sulfide deposits (sections 7 and 8) The distribution and nature of phosphate and metalliferous oil shale localities (sections 9 and 10). The architecture, kinematics, and timing of the complex thrust systems that disrupted and redistributed the Carboniferous and younger rocks; these studies are necessary in order to make a realistic palinspastic reconstruction of the basin (sections 11 and 12). The nature and extent of the petroleum system sourced from Mississippian rocks (section 13).

Circular↗