Geology topics

G. S. Fuis

Publications and source records attributed to G. S. Fuis.

At least 19 recordsLinked to original sources

USGS2012

Evolution of deep structure along the trans-Alaska crustal transect, Chugach Mountains and Copper River Basin, southern Alaska

One of the most important results of the Trans-Alaska Crustal Transect investigations is the discovery that more than one third of the North American plate in southern Alaska (Chugach Mountains and Copper River basin) consists of tectonically underplated oceanic lithosphere. In southern Alaska, exposed accreted tectonostratigraphic terranes, include, from south to north along the transect, the Prince William, Chugach, Peninsular, and Wrangellia terranes. Chief results from seismic refraction data include the following: (1) A sequence of layers of low and high velocity (5.7–7.8 km/s), more than 10 km thick, dips gently northward, with its top at the surface in the southernmost Chugach terrane and at more than 20-km depth beneath the southern Peninsular terrane. A high-velocity layer at the top of this sequence corresponds to metabasalt in the southernmost Chugach terrane. This sequence is interpreted to be tectonically underplated fragments of the Kula plate and its sedimentary overburden. (2) An intermediate-velocity layer (6.35–6.5 km/s) at 9-km depth beneath both the northern Chugach and southern Peninsular terranes appears to extend without offset across the deep projection of the suture between these two terranes, the Border Ranges fault system. (3) A crustal “root” between depths of 19 and 57 km beneath the northern Peninsular and Wrangellia terranes appears to extend without offset across the deep projection of the suture between these two terranes, the West Fork fault system. This crustal root also appears to abut the tectonically underplated sequence to the south. Unfortunately, in results 2 and 3 the apparent crosscutting and abutting relationships can not be unambiguously resolved. Three scenarios, A, B, and C, have been offered to explain the evolution of this structure. Scenarios A and B differ in interpretation of the depth extent of the northern Chugach and southern Peninsular terranes. In scenario A these terranes extend to only 9-km depth, where they rest on an unknown middle crust, interpreted as a deeper part of the Peninsular terrane. In this scenario, the northern Chugach and southern Peninsular terrenes moved landward as a tectonic wedge, during tectonic underplating in the latest Cretaceous or early Tertiary, and uplifted the upper crust of the Peninsular terrane to the north. In scenario B, the northern Chugach and southern Peninsular terranes extend to 20-km depth. In this scenario, they were compressed but not detached and displaced during accretion. Scenarios A, B, and C differ in interpretation of the deep crustal root that appears to abut the tectonically underplated sequence. Since the Peninsular and Wrangellia terranes were at or below sea level prior to the mid-Cretaceous, the root was probably emplaced in mid-Cretaceous or younger times. In scenario A the root is lower crust of North America that moved southward during tectonic underplating of the Kula plate. In scenario B the root is, in part, tectonically underplated rocks similar to the Kula plate sequence to the south. In scenario C the root is, in part, magmatically underplated rocks.

Journal of Geophysical Research↗

USGS2012

Crustal structure of accreted terranes in southern Alaska, Chugach Mountains and Copper River Basin, from seismic refraction results

Seismic refraction data were collected along a 320-km-long "transect' line in southern Alaska, crossing the Prince William, Chugach, Peninsular, and Wrangellia terranes, and along several shorter lines within individual terranes. Velocity structure in the upper crust (less than 9-km depth) differs among the four terranes. In contrast, layers in the middle crust (9- to 25-km depth) in some case extend across projected terrane boundaries. The top of a gently north dipping sequence of low- and high-velocity layers (5.7-7.8 km/s), more than 10 km thick, extends from near the surface in the southern Chugach terrane to more than 20-km depth beneath the southern Peninsular terrane. This sequence, truncated by the suture between the Prince William and Chugach terranes, is interpreted to be an underplated "terrane' made up of fragments of the Kula plate and its sedimentary overburden that were accreted during subduction in the late Mesozoic and/or early Tertiary, during or between times of accretion of the Prince William and Chugach terranes.

Alaska↗

USGS2012

Anatomy of a metamorphic core complex: seismic refraction/wide-angle reflection profiling in southeastern California and western Arizona

The metamorphic core complex belt in southeastern California and western Arizona is a NW-SE trending zone of unusually large Tertiary extension and uplift. Midcrustal rocks exposed in this belt raise questions about the crustal thickness, crustal structure, and the tectonic evolution of the region. Three seismic refraction/wide-angle reflection profiles, acquired and analyzed as a part of the U.S. Geological Survey's Pacific to Arizona Crustal Experiment, were collected to address these issues. The results presented here, which focus on the Whipple and Buckskin-Rawhide mountains, yield a consistent three-dimensional image of this part of the metamorphic core complex belt. The seismic refraction/wide-angle reflection data are of excellent quality and are characterized by six principal phases that can be observed on all three profiles. These phases include refractions from the near-surface and crystalline basement, reflections from boundaries in the middle and lower crust, and reflections and refractions from the upper mantle. The final model consists of a thin veneer (<2 km) of upper plate and fractured lower plate rocks (1.5–5.5 km s−1 ) overlying a fairly homogeneous basement (∼6.0 km s −1 ) and a localized high-velocity (6.4 km s −1 ) body situated beneath the western Whipple Mountains. A prominent midcrustal reflection is identified beneath the Whipple and Buckskin-Rawhide mountains between 10 and 20 km depth. This reflector has an arch-like shape and is centered beneath, or just west of, the metamorphic core complex belt. This event is underlain by a weaker, approximately subhorizontal reflection at 24 km depth. Together, these two discontinuities define a lens-shaped midcrustal layer with a velocity of 6.35–6.5 km s −1 . The apex of this midcrustal layer corresponds roughly to a region of major tectonic denudation and uplift (∼10 km) defined by surface geologic mapping and petrologic barometry studies. The layer thins to the northeast and is absent in the Transition Zone. The 6.35–6.5 km s −1 velocities are compatible with a diorite composition or a mixture of mafic and silicic rocks. This midcrustal layer is underlain by a higher-velocity lower crustal layer that is modeled as only 3–6 km thick beneath the metamorphic core complex belt and regions to the southwest. To the northeast, however, this layer thickens to 8–10 km as the midcrustal layer pinches out above it. The velocity of the lower crust is constrained by traveltime modeling and is 6.6±0.15 kms −1 beneath the western Transition Zone and the metamorphic core complex belt; higher velocities may be present farther to the southwest where the layer is thin. The velocity of the lower crust is too low to accommodate significant amount of mafic underplating at the base of the crust. Instead, we interpret the velocities to indicate that the lower crust is passively thinned beneath these regions without significant addition of mafic mantle-derived intrusions. The crust-mantle boundary does not dome up beneath the core complexes but remains approximately subhorizontal at a depth of 26–28 km or, in the case of the Whipple Mountains, actually deepens; a 3-km crustal root is modeled. This lack of upward doming of the Moho, together with the vertical alignment of the metamorphic core complex belt over what are believed to be extension-related structures in the middle and lower crust, suggest that there is no lateral offset of upper crustal deformation from deeper zones of extension, as one would expect if extension occurred along crust-penetrating shear zones (Wernicke, 1981; Wernicke et al., 1985). Instead, domed and inflated middle crust and thinned lower crust directly underlie the region of greatest thinning of the upper crust.

Journal of Geophysical Research↗

USGS2011

Images of crust beneath southern California will aid study of earthquakes and their effects

The Whittier Narrows earthquake of 1987 and the Northridge earthquake of 1991 highlighted the earthquake hazards associated with buried faults in the Los Angeles region. A more thorough knowledge of the subsurface structure of southern California is needed to reveal these and other buried faults and to aid us in understanding how the earthquake-producing machinery works in this region.

California↗

USGS2011

Seismograms offer insight into Oklahoma City bombing

The terrorist bombing of the Alfred P. Murrah Federal Building in Oklahoma City on April 19, 1995, generated seismic waves that were recorded on two permanent seismographs about 7 and 26 km away from the bombing. The seismogram recorded at 26 km shows two low-frequency wave trains, discrete sets of oscillatory signals, that begin about 10 s apart. Public release of this record prompted speculation that each wave train was caused by a different energy source. On May 23, 1995, the U.S. Geological Survey monitored the demolition of the bomb-ravaged Federal Building with portable seismographs (Figure 1). Two wave trains were picked up again. The recordings indicate that the wave trains during both the bombing and demolition represent seismic waves traveling at different velocities. We conclude that the two wave trains recorded during the bombing are consistent with a single impulsive energy source.

Oklahoma↗

USGS2011

Structure of the San Fernando Valley region, California: implications for seismic hazard and tectonic history

Industry seismic reflection data, oil test well data, interpretation of gravity and magnetic data, and seismic refraction deep-crustal profiles provide new perspectives on the subsurface geology of San Fernando Valley, home of two of the most recent damaging earthquakes in southern California. Seismic reflection data provide depths to Miocene–Quaternary horizons; beneath the base of the Late Miocene Modelo Formation are largely nonreflective rocks of the Middle Miocene Topanga and older formations. Gravity and seismic reflection data reveal the North Leadwell fault zone, a set of down-to-the-north faults that does not offset the top of the Modelo Formation; the zone strikes northwest across the valley, and may be part of the Oak Ridge fault system to the west. In the southeast part of the valley, the fault zone bounds a concealed basement high that influenced deposition of the Late Miocene Tarzana fan and may have localized damage from the 1994 Northridge earthquake. Gravity and seismic refraction data indicate that the basin underlying San Fernando Valley is asymmetric, the north part of the basin (Sylmar subbasin) reaching depths of 5–8 km. Magnetic data suggest a major boundary at or near the Verdugo fault, which likely started as a Miocene transtensional fault, and show a change in the dip sense of the fault along strike. The northwest projection of the Verdugo fault separates the Sylmar subbasin from the main San Fernando Valley and coincides with the abrupt change in structural style from the Santa Susana fault to the Sierra Madre fault. The Simi Hills bound the basin on the west and, as defined by gravity data, the boundary is linear and strikes ~N45°E. That northeast-trending gravity gradient follows both the part of the 1971 San Fernando aftershock distribution called the Chatsworth trend and the aftershock trends of the 1994 Northridge earthquake. These data suggest that the 1971 San Fernando and 1994 Northridge earthquakes reactivated portions of Miocene normal faults.

California↗

USGS2010

Detailed p- and s-wave velocity models along the LARSE II transect, Southern California

Structural details of the crust determined from P-wave velocity models can be improved with S-wave velocity models, and S-wave velocities are needed for model-based predictions of strong ground motion in southern California. We picked P- and S-wave travel times for refracted phases from explosive-source shots of the Los Angeles Region Seismic Experiment, Phase II (LARSE II); we developed refraction velocity models from these picks using two different inversion algorithms. For each inversion technique, we calculated ratios of P- to S-wave velocities (VP/VS) where there is coincident P- and S-wave ray coverage.We compare the two VP inverse velocity models to each other and to results from forward modeling, and we compare the VS inverse models. The VS and VP/VS models differ in structural details from the VP models. In particular, dipping, tabular zones of low VS, or high VP/VS, appear to define two fault zones in the central Transverse Ranges that could be parts of a positive flower structure to the San Andreas fault. These two zones are marginally resolved, but their presence in two independent models lends them some credibility. A plot of VS versus VP differs from recently published plots that are based on direct laboratory or down-hole sonic measurements. The difference in plots is most prominent in the range of VP = 3 to 5 km=s (or VS ~ 1:25 to 2:9 km/s), where our refraction VS is lower by a few tenths of a kilometer per second from VS based on direct measurements. Our new VS - VP curve may be useful for modeling the lower limit of VS from a VP model in calculating strong motions from scenario earthquakes.

Bulletin of the Seismological Society of America↗

USGS2010

Locating non-volcanic tremor along the San Andreas Fault using a multiple array source imaging technique

Non-volcanic tremor (NVT) has been observed at several subduction zones and at the San Andreas Fault (SAF). Tremor locations are commonly derived by cross-correlating envelope-transformed seismic traces in combination with source-scanning techniques. Recently, they have also been located by using relative relocations with master events, that is low-frequency earthquakes that are part of the tremor; locations are derived by conventional traveltime-based methods. Here we present a method to locate the sources of NVT using an imaging approach for multiple array data. The performance of the method is checked with synthetic tests and the relocation of earthquakes. We also applied the method to tremor occurring near Cholame, California. A set of small-aperture arrays (i.e. an array consisting of arrays) installed around Cholame provided the data set for this study. We observed several tremor episodes and located tremor sources in the vicinity of SAF. During individual tremor episodes, we observed a systematic change of source location, indicating rapid migration of the tremor source along SAF. ?? 2010 The Authors Geophysical Journal International ?? 2010 RAS.

Geophysical Journal International↗

USGS2009

Precise location of San Andreas Fault tremors near Cholame, California using seismometer clusters: Slip on the deep extension of the fault?

We examine a 24-hour period of active San Andreas Fault (SAF) tremor and show that this tremor is largely composed of repeated similar events. Utilizing this similarity, we locate the subset of the tremor with waveforms similar to an identified low frequency earthquake (LFE) "master template," located using P and S wave arrivals to be ???26 km deep. To compensate for low signal-to-noise, we estimate event-pair differential times at "clusters" of nearby stations rather than at single stations. We find that the locations form a near-linear structure in map view, striking parallel to the SAF and near the surface trace. Therefore, we suggest that at least a portion of the tremor occurs on the deep extension of the fault, likely reflecting shear slip, similar to subduction zone tremor. If so, the SAF may extend to the base of the crust, ???10 km below the deepest regular earthquakes on the fault. ?? 2009 by the American Geophysical Union.

Geophysical Research Letters↗

USGS2007

Structure of the California Coast Ranges and San Andreas Fault at SAFOD from seismic waveform inversion and reflection imaging

[1] A seismic reflection and refraction survey across the San Andreas Fault (SAF) near Parkfield provides a detailed characterization of crustal structure across the location of the San Andreas Fault Observatory at Depth (SAFOD). Steep-dip prestack migration and frequency domain acoustic waveform tomography were applied to obtain highly resolved images of the upper 5 km of the crust for 15 km on either side of the SAF. The resulting velocity model constrains the top of the Salinian granite with great detail. Steep-dip reflection seismic images show several strong-amplitude vertical reflectors in the uppermost crust near SAFOD that define an ∼2-km-wide zone comprising the main SAF and two or more local faults. Another prominent subvertical reflector at 2–4 km depth ∼9 km to the northeast of the SAF marks the boundary between the Franciscan terrane and the Great Valley Sequence. A deep seismic section of low resolution shows several reflectors in the Salinian crust west of the SAF. Two horizontal reflectors around 10 km depth correlate with strains of seismicity observed along-strike of the SAF. They represent midcrustal shear zones partially decoupling the ductile lower crust from the brittle upper crust. The deepest reflections from ∼25 km depth are interpreted as crust-mantle boundary.

Journal of Geophysical Research B: Solid Earth↗

USGS2006

Structure of the San Andreas fault zone at SAFOD from a seismic refraction survey

Refraction traveltimes from a 46-km long seismic survey across the San Andreas Fault were inverted to obtain two-dimensional velocity structure of the upper crust near the SAFOD drilling project. The model contains strong vertical and lateral velocity variations from <2 km/s to ???6 km/s. The Salinian terrane west of the San Andreas Fault has much higher velocity than the Franciscan terrane east of the fault. Salinian basement deepens from 0.8 km subsurface at SAFOD to ???2.5 km subsurface 20 km to the southwest. A strong reflection and subtle velocity contrast suggest a steeply dipping fault separating the Franciscan terrane from the Great Valley Sequence. A low-velocity wedge of Cenozoic sedimentary rocks lies immediately southwest of the San Andreas Fault. This body is bounded by a steep fault just northeast of SAFOD and approaches the depth of the shallowest earthquakes. Multiple active and inactive fault strands complicate structure near SAFOD. Copyright 2006 by the American Geophysical Union.

Geophysical Research Letters↗

USGS2006

Surface fault slip associated with the 2004 Parkfield, California, earthquake

Surface fracturing occurred along the San Andreas fault, the subparallel Southwest Fracture Zone, and six secondary faults in association with the 28 September 2004 (M 6.0) Parkfield earthquake. Fractures formed discontinuous breaks along a 32-km-long stretch of the San Andreas fault. Sense of slip was right lateral; only locally was there a minor (1-11 mm) vertical component of slip. Right-lateral slip in the first few weeks after the event, early in its afterslip period, ranged from 1 to 44 mm. Our observations in the weeks following the earthquake indicated that the highest slip values are in the Middle Mountain area, northwest of the mainshock epicenter (creepmeter measurements indicate a similar distribution of slip). Surface slip along the San Andreas fault developed soon after the mainshock; field checks in the area near Parkfield and about 5 km to the southeast indicated that surface slip developed more than 1 hr but generally less than 1 day after the event. Slip along the Southwest Fracture Zone developed coseismically and extended about 8 km. Sense of slip was right lateral; locally there was a minor to moderate (1-29 mm) vertical component of slip. Right-lateral slip ranged from 1 to 41 mm. Surface slip along secondary faults was right lateral; the right-lateral component of slip ranged from 3 to 5 mm. Surface slip in the 1966 and 2004 events occurred along both the San Andreas fault and the Southwest Fracture Zone. In 1966 the length of ground breakage along the San Andreas fault extended 5 km longer than that mapped in 2004. In contrast, the length of ground breakage along the Southwest Fracture Zone was the same in both events, yet the surface fractures were more continuous in 2004. Surface slip on secondary faults in 2004 indicated previously unmapped structural connections between the San Andreas fault and the Southwest Fracture Zone, further revealing aspects of the structural setting and fault interactions in the Parkfield area.

Bulletin of the Seismological Society of America↗

USGS2004

Upper crustal structure from the Santa Monica Mountains to the Sierra Nevada, Southern California: Tomographic results from the Los Angeles Regional Seismic Experiment, Phase II (LARSE II)

In 1999, the U.S. Geological Survey and the Southern California Earthquake Center (SCEC) collected refraction and low-fold reflection data along a 150-km-long corridor extending from the Santa Monica Mountains northward to the Sierra Nevada. This profile was part of the second phase of the Los Angeles Region Seismic Experiment (LARSE II). Chief imaging targets included sedimentary basins beneath the San Fernando and Santa Clarita Valleys and the deep structure of major faults along the transect, including causative faults for the 1971 M 6.7 San Fernando and 1994 M 6.7 Northridge earthquakes, the San Gabriel Fault, and the San Andreas Fault. Tomographic modeling of first arrivals using the methods of Hole (1992) and Lutter et al. (1999) produces velocity models that are similar to each other and are well resolved to depths of 5-7.5 km. These models, together with oil-test well data and independent forward modeling of LARSE II refraction data, suggest that regions of relatively low velocity and high velocity gradient in the San Fernando Valley and the northern Santa Clarita Valley (north of the San Gabriel Fault) correspond to Cenozoic sedimentary basin fill and reach maximum depths along the profile of ???4.3 km and >3 km , respectively. The Antelope Valley, within the western Mojave Desert, is also underlain by low-velocity, high-gradient sedimentary fill to an interpreted maximum depth of ???2.4 km. Below depths of ???2 km, velocities of basement rocks in the Santa Monica Mountains and the central Transverse Ranges vary between 5.5 and 6.0 km/sec, but in the Mojave Desert, basement rocks vary in velocity between 5.25 and 6.25 km/sec. The San Andreas Fault separates differing velocity structures of the central Transverse Ranges and Mojave Desert. A weak low-velocity zone is centered approximately on the north-dipping aftershock zone of the 1971 San Fernando earthquake and possibly along the deep projection of the San Gabriel Fault. Modeling of gravity data, using densities inferred from the velocity model, indicates that different velocity-density relationships hold for both sedimentary and basement rocks as one crosses the San Andreas Fault. The LARSE II velocity model can now be used to improve the SCEC Community Velocity Model, which is used to calculate seismic amplitudes for large scenario earthquakes.

Bulletin of the Seismological Society of America↗

USGS2004

Seismic velocity models for the Denali fault zone along the Richardson Highway, Alaska

Crustal-scale seismic-velocity models across the Denali fault zone along the Richardson Highway show a 50-km-thick crust, a near vertical fault trace, and a 5-km-wide damage zone associated with the fault near Trans-Alaska Pipeline Pump Station 10, which provided the closest strong ground motion recordings of the 2002 Denali fault earthquake. We compare models, derived from seismic reflection and refraction surveys acquired in 1986 and 1987, to laboratory measurements of seismic velocities for typical metamorphic rocks exposed along the profiles. Our model for the 1986 seismic reflection profile indicates a 5-km-wide low-velocity zone in the upper 1 km of the Denali fault zone, which we interpret as fault gouge. Deeper refractions from our 1987 line image a 40-km wide, 5-km-deep low-velocity zone along the Denali fault and nearby associated fault strands, which we attribute to a composite damage zone along several strands of the Denali fault zone and to the obliquity of the seismic line to the fault zone. Our velocity model and other geophysical data indicate a nearly vertical Denali fault zone to a depth of 30 km. After-shocks of the 2002 Denali fault earthquake and our velocity model provide evidence for a flower structure along the fault zone consisting of faults dipping toward and truncated by the Denali fault. Wide-angle reflections indicate that the crustal thickness beneath the Denali fault is transitional between the 60-km-thick crust beneath the Alaska Range to the south, and the extended, 30-km-thick crust of the Yukon-Tanana terrane to the north.

Alaska↗

USGS2003

Data report for the main line of the PSINE seismic survey across the San Andreas Fault and SAFOD Site near Parkfield, California

In October and November 1998, the U.S. Geological Survey, Virginia Polytechnic Institute, Stanford University, and Geometrics Corporation jointly acquired a highresolution seismic reflection/refraction profile across the San Andreas Fault Zone (SAFZ) and the proposed San-Andreas-Fault-Observatory-at-Depth (SAFOD) drill site located near Parkfield, California (Fig. 1a). We refer to this seismic survey as the Parkfield Seismic Imaging-Ninety Eight (PSINE) survey, the highest-resolution seismic survey yet completed across the SAF in central California. This report, which presents acquisition parameters and example shot gathers for the PSINE seismic survey, is intended to provide necessary information for those who wish to use the PSINE data for research. The PSINE survey is part of the proposed SAFOD investigation: a proposed study to investigate physical and chemical properties and processes that control deformation and earthquake generation within the SAF zone by drilling into the active trace of the fault (Zoback et al., 1998; www.earthscope.org). Geological and geophysical investigations are planned prior to, during, and after completion of the borehole. The PSINE survey, which was one of the pre-drilling investigations, was designed to determine the subsurface stratigraphic and structural relations in the vicinity of the proposed drill site, to better locate the target fault zone within the subsurface, and to image obstacles that may impede drilling. Data acquisition parameters, experiment setup, and parameters needed to work with the PSINE data are provided in this report. The PSINE data provide useful reflective images (Catchings et al., in prep; Rymer et al., in prep; Hole et al.,) and velocity data (Catchings et al., 2002) in the vicinity of the SAFOD drill site and the San Andreas fault.

California↗

USGS2003

Fault systems of the 1971 San Fernando and 1994 Northridge earthquakes, southern California: Relocated aftershocks and seismic images from LARSE II

We have constructed a composite image of the fault systems of the M 6.7 San Fernando (1971) and Northridge (1994), California, earthquakes, using industry reflection and oil test well data in the upper few kilometers of the crust, relocated aftershocks in the seismogenic crust, and LARSE II (Los Angeles Region Seismic Experiment, Phase II) reflection data in the middle and lower crust. In this image, the San Fernando fault system appears to consist of a decollement that extends 50 km northward at a dip of ???25?? from near the surface at the Northridge Hills fault, in the northern San Fernando Valley, to the San Andreas fault in the middle to lower crust. It follows a prominent aseismic reflective zone below and northward of the main-shock hypocenter. Interpreted upward splays off this decollement include the Mission Hills and San Gabriel faults and the two main rupture planes of the San Fernando earthquake, which appear to divide the hanging wall into shingle- or wedge-like blocks. In contrast, the fault system for the Northridge earthquake appears simple, at least east of the LARSE II transect, consisting of a fault that extends 20 km southward at a dip of ???33?? from ???7 km depth beneath the Santa Susana Mountains, where it abuts the interpreted San Fernando decollement, to ???20 km depth beneath the Santa Monica Mountains. It follows a weak aseismic reflective zone below and southward of the mainshock hypocenter. The middle crustal reflective zone along the interpreted San Fernando decollement appears similar to a reflective zone imaged beneath the San Gabriel Mountains along the LARSE I transect, to the east, in that it appears to connect major reverse or thrust faults in the Los Angeles region to the San Andreas fault. However, it differs in having a moderate versus a gentle dip and in containing no mid-crustal bright reflections.

Geology↗

USGS2001

Seismic mapping of shallow fault zones in the San Gabriel Mountains from the Los Angeles Region Seismic Experiment, southern California

During the Los Angeles Region Seismic Experiment (LARSE), a reflection/refraction survey was conducted along a profile (line 1) extending from Seal Beach, California, northeastward to the Mojave Desert and crossing the Los Angeles and San Gabriel Valley basins and San Gabriel Mountains. In most shot gathers from the southern and central San Gabriel Mountains, clear secondary arrivals are seen that merge, or appear to merge, with first arrivals at three locations, including the location of the Vincent thrust fault, an exposed late Mesozoic/early Cenozoic megathrust. These secondary arrivals are interpretable as reflections in the shallow crust (<5 km depth) from a concave-upward interface that projects to the surface in the north near the Vincent thrust fault, is offset in its central part at the San Gabriel fault (an old branch of the San Andreas fault), and terminates in the south at 1 to 2 km depth at the southern mountain front. The velocity structure above and below this interface strongly suggests it is the Vincent thrust fault: intermediate velocities (6.2 km/s), consistent with mylonites overlying the Vincent thrust fault, are observed above it; lower velocities (5.8 km/s), consistent with the Pelona Schist underlying the Vincent thrust fault, are observed below it. Problems arise, however, in attempting to match this reflector to the exposed Vincent thrust fault, which is seen in outcrops east of line 1. The Vincent thrust fault is shallower than the reflector in most places. An unmapped structure (steep fault, monocline, or thrust fault) is required between line 1 and the outcrops that either drops the Vincent thrust fault down to the depths of the reflector or repeats the Vincent thrust fault beneath line 1 in the footwall of another thrust fault. An alternative interpretation of the reflector is a deep greenstone horizon within the Pelona Schist, although this alternative is not favored by the velocity structure. Copyright 2001 by the American Geophysical Union.

California↗

USGS2001

Crustal structure and tectonics from the Los Angeles basin to the Mojave Desert, southern California

A seismic refraction and low-fold reflection survey, known as the Los Angeles Region Seismic Experiment (LARSE), was conducted along a transect (line 1) extending from Seal Beach, California, to the Mojave Desert, crossing the Los Angeles and San Gabriel Valley basins and San Gabriel Mountains. The chief result of this survey is an interpreted cross section that addresses a number of questions regarding the crustal structure and tectonics of southern California that have been debated for decades and have important implications for earthquake hazard assessment. The results (or constraints) are as follows. (1) The maximum depth of the Los Angeles basin along line 1 is 8–9 km. (2) The deep structure of the Sierra Madre fault zone in the northern San Gabriel Valley is as follows. The Duarte branch of the Sierra Madre fault zone forms a buried, 2.5-km-high, moderately north dipping buttress between the sedimentary and volcanic rocks of the San Gabriel Valley and the igneous and metamorphic rocks of the San Gabriel Mountains. (For deeper structure, see following.) (3) There are active crustal décollements in southern California. At middle-crustal depths, the Sierra Madre fault zone appears to sole into a master décollement that terminates northward at the San Andreas fault and projects southward beneath the San Gabriel Valley to the Puente Hills blind thrust fault. (4) The dip and depth extent of the San Andreas fault along line 1 dips steeply (∼83°) northward and extends to at least the Moho. (5) The subsurface lateral extent of the Pelona Schist in southern California is as follows. Along line 1, the Pelona Schist underlies much, if not all of the San Gabriel Mountains south of the San Andreas fault to middle-crustal depths. North of the San Andreas fault, it is apparently not present along the transect.

California↗