Geology ReportsSearch

Geology topics

Frederick Graybeal

Publications and source records attributed to Frederick Graybeal.

5 recordsLinked to original sources

Critical minerals in subduction-related magmatic-hydrothermal systems of the United States

During the World War and Cold War eras (1910s–1990s), domestic consumption of numerous mineral commodities relied increasingly on imported supplies. Consumption reliance has since expanded to include 50 “critical minerals” (elements and mineral commodities) that are mostly to entirely imported and subject to curtailment by suppliers or supply chain disruption. New domestic supplies of critical minerals are being pursued by mining companies and by several federal departments and agencies. Information on domestic deposits and resources of critical minerals is being compiled by the U.S. Geological Survey Mineral Resources Program, which has organized investigations by mineral system, deposit type, and commodity. Production, reserves, resources, and inventories of 21 critical minerals in domestic magmatic-hydrothermal deposits related to subduction-generated magmatism, and in tailings, slag, slimes, and electrolyte from copper concentrators, smelters, and refineries that processed some deposits, are largely restricted to Western States and Alaska. The critical mineral commodities Al, Sb, As, Bi, Co, fluorite, Ga, Ge, In, Mn, Ni, Nb, Pd, Pt, potash, Re, Ta, Te, Sn, W, and V are variably concentrated in porphyry/skarn copper-(molybdenum), skarn-replacement-vein (S-R-V) tungsten, polymetallic sulfide S-R-V intermediate sulfidation (IS), high-sulfidation gold-silver, low-sulfidation gold-silver, and lithocap alunite deposit types. These deposit types occur in porphyry copper-molybdenum-gold, alkalic porphyry, porphyry tin (granite related), and reduced intrusion-related mineral systems. Production, reserves, and resources of Co, Ni, Nb, Pd, Pt, Ta, Sn, and V in subduction-related deposits in Western States are insignificant to small, mostly equivalent to months to a few years of recent annual domestic consumption (2016–2020). Significant inventories, equivalent to 2 or more years of consumption of aluminum, antimony, potash, and tungsten in unmined S-R-V tungsten, polymetallic sulfide S-R-V-IS, and lithocap alunite deposits vary from approximately 2 to 8 years. Several decades of consumption of arsenic, bismuth, fluorite, gallium, germanium, and indium exist in some polymetallic sulfide S-R-V-IS and lithocap alunite deposit types. Based on concentrations of critical minerals in reserves, resources, drill holes, and deposit domains (ore types), and in captive refinery records, the largest domestic inventories of Sb, As, Bi, Re, and Te, and possibly Ga, Ge, In, Sn, and W, are in porphyry copper-molybdenum (Cu-Mo) deposits in Alaska, Idaho, Utah, and Arizona, and in interim products of processing porphyry Cu-Mo deposit ores for recovery of copper and molybdenum. Concentrations of critical minerals in archival specimens and sample collections, although somewhat biased by collection and conservation decisions and categorization, are broadly proportionate to those in reserves, resources, and drill holes. These concentrations imply significant inventories of some critical minerals in deposits for which production, resources, and refinery records are unavailable or incomplete. Because of the large masses of ores mined and processed annually (hundreds of millions of metric tons) and in reserves and resources (hundreds of millions of metric tons to billions of metric tons), calculated inventories of critical minerals in porphyry Cu-Mo deposits are equivalent to decades and centuries of recent consumption. However, these inventories should not be considered consumable supplies without reserve definition and development of economically viable mining plans and recovery techniques. An expeditious strategy for elimination or reduction of import reliance is recovery, and improved recovery efficiency, of Sb, As, Bi, Re, and Te, and possibly Ga, Ge, In, Ni, Sn, Ti, and W; during concentration and refining of copper and molybdenum minerals in ores of operating porphyry Cu-Mo mines; and in unmined porphyry Cu-Mo resources. These chalcophile, siderophile, and lithophile critical minerals, often undetectable in ore, are concentrated (hundreds of parts per million to percents) in slimes and electrolyte during copper electrorefining or could be recovered, in part, during sulfide concentration and smelting. Other than rhenium (recovered during molybdenum refining) and tellurium, all have been routinely discarded. Subsidization (for example, commodity price guarantees, tax credits, recovery technology development), political initiative, and (or) sustained market favorability could support new production of critical mineral commodities from subduction-related magmatic-hydrothermal deposits in Western States. In addition, insufficient domestic refining capacity could relegate the large inventories of critical minerals in porphyry Cu-Mo reserves and resources (for example, Pebble, Alaska; Resolution and Copper World [Rosemont], Arizona) to exportation in concentrates and importation insecurity, fortifying their present status.

Scientific Investigations Report

Descriptive models for epithermal gold-silver deposits

Epithermal gold-silver deposits are vein, stockwork, disseminated, and replacement deposits that are mined primarily for their gold and silver contents; some deposits also contain substantial resources of lead, zinc, copper, and (or) mercury. These deposits form in the uppermost parts of the crust, at depths less than about 1,500 meters below the water table, and at temperatures below about 300 °C. Most epithermal gold-silver deposits are genetically related to hydrothermal systems associated with subaerial volcanism and intrusion of calc-alkaline magmas along convergent plate margins. These deposits formed throughout most of geologic time, although most known deposits are Cenozoic, which reflects preferential preservation of these shallowly formed deposits in tectonically unstable regions. Epithermal gold-silver deposits range in size from tens of thousands to greater than 1 billion metric tons of ore and have gold contents of 0.1 to greater than 30 grams per metric ton and silver contents of less than 1 to several thousand grams per metric ton. Historically, these deposits have been an important source of gold and silver and are estimated to contain about 8 percent of global gold. The wide range of tonnage-grade characteristics makes epithermal gold-silver deposits an attractive target for small and large exploration and mining companies. This report constitutes a new descriptive model for epithermal gold-silver deposits. It summarizes characteristics of known deposits, including their geological, geophysical, geochemical, and geoenvironmental aspects. Models concerning the genesis of epithermal gold-silver deposits are discussed. The application of descriptive and genetic aspects of the model to mineral exploration and resource assessment of undiscovered deposits is described. Finally, areas where additional research is needed to better understand the genesis of these deposits are identified. An extensive summary table outlining the characteristics of about 100 epithermal gold-silver deposits is included as an appendix; this summary table includes most of the world’s largest epithermal gold-silver deposits, and many smaller, well-studied deposits.

Scientific Investigations Report

Geologic map of the Patagonia Mountains, Santa Cruz County, Arizona

The Patagonia Mountains contain two large porphyry Cu-Mo systems each with separate associated hypogene and supergene zones, two high-grade Cu-Mo breccia pipes, one large epithermal Ag-Pb-Zn-Mn deposit, and numerous additional areas of base- and precious-metal mineralization all zoned around a Laramide-age composite batholith of intermediate composition. Compilations and new work by Vikre and others (2014) have identified as many as eight separate intrusive phases of the batholith and five separate hydrothermal events spanning at least 16 m.y., in addition to a supergene enrichment event of middle Tertiary age. The geologic map presents a spatial context for this important new information that is intended to support further work in this highly mineralized region. Several spatial databases provide data for the geologic map of the Patagonia Mountains in Arizona. The data can be viewed and queried in ArcGIS 10, a geographic information system; a geologic map is also available in PDF format. All products are available online only.

Arizona

Concealed basalt-matrix diatremes with Cu-Au-Ag-(Mo)-mineralized xenoliths, Santa Cruz Porphyry Cu-(Mo) System, Pinal County, Arizona

The Santa Cruz porphyry Cu-(Mo) system near Casa Grande, Arizona, includes the Sacaton mine deposits and at least five other concealed, mineralized fault blocks with an estimated minimum resource of 1.5 Gt @ 0.6% Cu. The Late Cretaceous-Paleocene system has been dismembered and rotated by Tertiary extension, partially eroded, and covered by Tertiary-Quaternary basin-fill deposits. The mine and mineralized fault blocks, which form an 11 km (~7 miles) by 1.6 km (~1 mile) NE-SW–trending alignment, represent either pieces of one large deposit, several deposits, or pieces of several deposits. The southwestern part of the known system is penetrated by three or more diatremes that consist of heterolithic breccia pipes with basalt and clastic matrices, and subannular tuff ring and maar-fill sedimentary deposits associated with vents. The tephra and maar-fill deposits, which are covered by ~485 to 910 m (~1,600–3,000 ft) of basin fill, lie on a mid-Tertiary erosion surface of Middle Proterozoic granite and Late Cretaceous porphyry, which compose most xenoliths in pipes and are the host rocks of the system. Some igneous xenoliths in the pipes contain bornite-chalcopyrite-covellite assemblages with hypogene grades >1 wt % Cu, 0.01 ounces per ton (oz/t) Au, 0.5 oz/t Ag, and small amounts of Mo (<0.01 wt %). These xenoliths were derived from mineralized rocks that have not been encountered in drill holes, and attest to additional, possibly higher-grade deposits within or subjacent to the known system. The geometry, stratigraphy, and temporal relationships of pipes and tephras, interpreted from drill hole spacing and intercepts, multigenerational breccias and matrices, reequilibrated and partially decomposed sulfide-oxide mineral assemblages, melted xenoliths, and breccia matrix compositions show that the diatremes formed in repeated stages. Initial pulses of basalt magma fractured granite, porphyry, and other crustal rocks during intrusion, transported multi-sized fragments of these rocks upward, and partially melted small fragments. Rapid decompression of magma induced catastrophic devolatilization that ruptured overlying rocks to the surface, and generated fragment-volatile suspensions that abraded conduits into near-vertical cylindrical structures. Fragments entrained in suspensions were milled and sorted, and ejected as basal surge, pyroclastic deposits, and airfall tephra that built tuff rings around vents and filled vent depressions. Comminuted m- to mm-sized fragments of wall rocks in magma and suspensions that remained in conduits solidified as heterolithic breccias. Subsequent pulses of basalt magma ascended through the same conduits, brecciated older heterolithic breccias, devolatilized, and quenched, leaving two or more generations of nested and mingled heterolithic breccias and internal zones of fluidized fragments. Tephra and maar-fill deposits from later eruptions are composed of more hydrous and oxidized minerals than earlier tephras, reflecting a higher proportion of water in transport fluid which, based on fluid inclusion populations in mineralized xenoliths, was saline water and CO 2 . The large vertical extent (~600 m; ~2,000 ft) of basalt matrix in pipes, near-paleosurface matrix vesiculation, and plastically deformed basalt lapilli indicates that diatreme eruptions were predominantly phreatic. Diatreme xenoliths represent crustal stratigraphy and, as in the Santa Cruz system, provide evidence of concealed mineral resources that can guide exploration drilling through cover. Vectors to the source of bornite-dominant xenoliths containing >1% Cu and significant Au and Ag could be determined by refinement of breccia pipe geometries, by reassembly of mineralized fault blocks using modal, chemical, and temporal characteristics of hydrothermal mineral assemblages and fluid inclusions, and by paleodrainage analysis.

Arizona

A review of silver-rich mineral deposits and their metallogeny

Mineral deposits with large inventories or high grades of silver are found in four genetic groups: (1) volcanogenic massive sulfide (VMS), (2) sedimentary exhalative (SEDEX), (3) lithogene, and, (4) magmatichydrothermal. Principal differences between the four groups relate to source rocks and regions, metal associations, process and timing of mineralization, and tectonic setting. These four groups may be subdivided into specific metal associations on ternary diagrams based on relative metal contents. The VMS deposits rarely contain more than 15,600 t Ag (500 Moz). Grades average 33 g/t Ag. Variable Ag- Pb-Zn-Cu-Au ± Sn concentrations are interpreted as having been derived both from shallow plutons and by leaching of the volcanic rock pile in regions of thin or no continental crust and the mineralization is syngenetic. Higher silver grades are associated with areas of abundant felsic volcanic rocks. The SEDEX deposits rarely contain more than 15,600 t Ag (500 Moz). Grades average 46 g/t Ag. Silver, lead, and zinc in relatively consistent proportions are leached from sedimentary rocks filling rift-related basins, where the continental crust is thin, and deposited as syngenetic to diagenetic massive sulfides. Pre-mineral volcanic rocks and their detritus may occur deep within the basin and gold is typically absent. Lithogene silver-rich deposits are epigenetic products of varying combinations of compaction, dewatering, meteoric water recharge, and metamorphism of rift basin-related clastic sedimentary and interbedded volcanic rocks. Individual deposits may contain more than 15,600 t Ag (500 Moz) at high grades. Ores are characterized by four well-defined metal associations, including Ag, Ag-Pb-Zn, Ag-Cu, and Ag-Co-Ni-U. Leaching, transport, and deposition of metals may occur both in specific sedimentary strata and other rock types adjacent to the rift. Multiple mineralizing events lasting 10 to 15 m.y., separated by as much as 1 b.y., may occur in a single basin. Gold is absent at economic levels. The magmatic-hydrothermal silver-rich deposits are epigenetic and related to cordilleran igneous and volcanic suites. Six magmatic-hydrothermal districts each contain more than 31,000 t Ag (1,000 Moz) with grades of veins >600 g/t Ag. Mineralization occurs as veins, massive sulfides in carbonate rocks, and disseminated deposits including porphyry silver deposits, a proposed exploration model. Most deposits are epithermal with low-sulfidation alteration assemblages. Deposits are often telescoped and well-zoned. All large and high-grade magmatic-hydrothermal deposits appear confined to regions of relatively thick continental crust above Cenozoic consuming plate margins on the eastern side of the Pacific Rim. Silver in these deposits may be partly derived by hydrothermal leaching of rocks under or adjacent to the deposits. Specific metal associations in SEDEX and lithogene deposits may reflect confinement of fluid flow to and derivation of metals from specific source rock types. Variable metal associations in VMS and magmatichydrothermal deposits may reflect derivation of metals from a more diverse suite of rocks by convecting hydrothermal systems and processes related to the generation of magma. The discovery rate for silver-rich deposits has accelerated during the past decade, with new deposit types, metal associations, and exploration models being identified that provide numerous exploration and research opportunities.

Book chapter