Geology Reports⌕ Search

Geology topics

Fred K. Miller

Publications and source records attributed to Fred K. Miller.

18 recordsLinked to original sources
USGS2014

A compilation of K-Ar-ages for southern California

The purpose of this report is to make available a large body of conventional K-Ar ages for granitic, volcanic, and metamorphic rocks collected in southern California. Although one interpretive map is included, the report consists primarily of a systematic listing, without discussion or interpretation, of published and unpublished ages that may be of value in future regional and other geologic studies. From 1973 to 1979, 468 rock samples from southern California were collected for conventional K-Ar dating under a regional geologic mapping project of Southern California (predecessor of the Southern California Areal Mapping Project). Most samples were collected and dated between 1974 and 1977. For 61 samples (13 percent of those collected), either they were discarded for varying reasons, or the original collection data were lost. For the remaining samples, 518 conventional K-Ar ages are reported here; coexisting mineral pairs were dated from many samples. Of these K-Ar ages, 225 are previously unpublished, and identified as such in table 1. All K-Ar ages are by conventional K-Ar analysis; no 40 Ar/ 39 Ar dating was done. Subsequent to the rock samples collected in the 1970s and reported here, 33 samples were collected and 38 conventional K-Ar ages determined under projects directed at (1) characterization of the Mesozoic and Cenozoic igneous rocks in and on both sides of the Transverse Ranges and (2) clarifying the Mesozoic and Cenozoic tectonics of the eastern Mojave Desert. Although previously published (Beckerman et al., 1982), another eight samples and 11 conventional K-Ar ages are included here, because they augment those completed under the previous two projects.

California↗
USGS2004

Preliminary geologic map of the Big Bear City 7.5' Quadrangle, San Bernardino County, California

This data set maps and describes the geology of the Big Bear City 7.5' quadrangle, San Bernardino County, California. Created using Environmental Systems Research Institute's ARC/INFO software, the data base consists of the following items: (1) a rock-unit coverage and attribute tables (polygon and arc) containing geologic contacts, units and rock-unit labels as annotation which are also included in a separate annotation coverage, bbc_anno (2) a point coverage containing structural point data and (3) a coverage containing fold axes. In addition, the data set includes the following graphic and text products: (1) A PostScript graphic plot-file containing the geologic map, topography, cultural data, a Correlation of Map Units (CMU) diagram, a Description of Map Units (DMU), an index map, a regional geologic and structure map, and an explanation for point and line symbols; (2) PDF files of the Readme (including the metadata file as an appendix), and a screen graphic of the plot produced by the PostScript plot file. The geologic map describes a geologically complex area on the north side of the San Bernardino Mountains. Bedrock units in the Big Bear City quadrangle are dominated by (1) large Cretaceous granitic bodies ranging in composition from monzogranite to gabbro, (2) metamorphosed sedimentary rocks ranging in age from late Paleozoic to late Proterozoic, and (3) Middle Proterozoic gneiss. These rocks are complexly deformed by normal, reverse, and thrust faults, and in places are tightly folded. The geologic map database contains original U.S. Geological Survey data generated by detailed field observation and by interpretation of aerial photographs. The map data was compiled on base-stable cronoflex copies of the Big Bear City 7.5' topographic map, transferred to a scribe-guide and subsequently digitized. Lines, points, and polygons were edited at the USGS using standard ARC/INFO commands. Digitizing and editing artifacts significant enough to display at a scale of 1:24,000 were corrected. Within the database, geologic contacts are represented as lines (arcs), geologic units as polygons, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum.

Open-File Report↗
USGS2003

Geologic map of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana

This data set maps and describes the geology of the Bonners Ferry 30' x 60' quadrangle, Idaho and Montana. The bedrock geology of the Bonners Ferry quadrangle consists of sedimentary, metamorphic, and granitic rocks ranging in age from Middle Proterozoic to Eocene. Bedrock units include rocks of (1) the Middle Proterozoic Belt Supergroup (2) the Middle Proterozoic Deer Trail Group, (3) the Late Proterozoic Windermere Group, (4) miogeoclinal or shelf facies lower Paleozoic rocks, and (5) Mesozoic and Tertiary granitic rocks. The Belt Supergroup, a thick sequence of argillite, siltite, quartzite, and impure carbonate rocks up to 9,000 m thick, occurs in two non-contiguous sequences in the quadrangle: (1) the Clark Fork-Eastport Sequence east of the Purcell trench and (2) the Newport Sequence in the hanging wall of the Newport Fault. Only the two lowest Belt formations of the Newport Sequence are found in the Bonners Ferry quadrangle, but these two units are part of a continuous section, which extends southwestward to the town of Newport. Belt Supergroup rocks of the Clark Fork-Eastport Sequence are separated from those of the Newport Sequence by the Newport Fault, Priest River Complex, and Purcell Trench Fault. Some formations of the Belt Supergroup show differences in thickness and (or) lithofacies from one sequence to the other that are greater than those predicted from an empirical depositional model for the distances currently separating the sequences. These anomalous thickness and facies differences suggest that there has been a net contraction along structures separating the sequences despite Eocene extension associated with emplacement of the Priest River Complex. In addition to these two Belt sequences, probable Belt rocks are present in the Priest River Complex as high metamorphic grade crystalline schist and gneiss. Northwest of the Newport Sequence of Belt Supergroup is the Deer Trail Group, a distinct Middle Proterozoic sequence of argillite, siltite, quartzite, and carbonate rocks lithostratigraphically similar to the Belt Supergroup, but separated from all Belt Supergroup rocks by the Jumpoff Joe Fault. Rocks of the Deer Trail Group are pervasively phyllitic and noticeably more deformed than rocks in the Belt Supergroup sequences. Lithostratigraphically the Deer Trail Group is equivalent to part of the upper part of the Belt Supergroup. Differences in lithostratigraphy and thickness between individual Deer Trail and Belt units and between the Deer Trail and Belt sequences as a whole indicate that they were probably much farther apart when they were deposited. The Windermere Group is a lithologically varied sequence of volcanic rocks and coarse-grained, mostly immature, clastic sedimentary rocks up to 8,000 m thick. It is characterized by extreme differences in thickness and lithofacies over short distances caused by syndepositional faulting associated with initial stages of continental rifting in the Late Proterozoic. Strata of the Windermere Group unconformably overlie only the Deer Trail Group, and are nowhere found in depositional contact with Belt Supergroup rocks. Paleozoic rocks in the Bonners Ferry quadrangle consist of a thin, fault-bounded remnant preserved within the Clark Fork-Eastport Belt Supergroup Sequence. Mesozoic granitic rocks underlie at least 50 percent of the Bonners Ferry quadrangle. They fall into two petrogenetic suites, hornblende-biotite plutons and muscovite-biotite (two-mica) plutons, most of which are Cretaceous in age. Both suites are represented in the mid-crustal Priest River Complex and in the higher level plutons that flank the complex; by far the majority of the Priest River Complex are Cretaceous, two-mica bodies. Tertiary rocks are restricted to a single small stock, numerous hypabyssal dikes that are too small to show at the scale of the map, and to cataclastic rocks related to the Newport Fault. Quaternary deposits include unconsolidated to poorl

Miscellaneous Field Studies Map↗
USGS2003

Preliminary geologic map of the San Bernardino 30' x 60' quadrangle, California (includes preliminary GIS database)

The San Bernardino 30'x60' quadrangle, southern California, is diagonally bisected by the San Andreas Fault Zone, separating the San Gabriel and San Bernardino Mountains, major elements of California's east-oriented Transverse Ranges Province. Included in the southern part of the quadrangle is the northern part of the Peninsular Ranges Province and the northeastern part of the oil-producing Los Angeles basin. The northern part of the quadrangle includes the southern part of the Mojave Desert Province. Pre-Quaternary rocks within the San Bernardino quadrangle consist of three extensive, well-defined basement rock assemblages, the San Gabriel Mountains, San Bernardino Mountains, and the Peninsular Ranges assemblages, and a fourth assemblage restricted to a narrow block bounded by the active San Andreas Fault and the Mill Creek Fault. Each of these basement rock assemblages is characterized by a relatively unique suite of rocks that was amalgamated by the end of the Cretaceous and (or) early Cenozoic. Some Tertiary sedimentary and volcanic rocks are unique to specific assemblages, and some overlap adjacent assemblages. A few Miocene and Pliocene units cross the boundaries of adjacent assemblages, but are dominant in only one. Tectonic events directly and indirectly related to the San Andreas Fault system have partly dismembered the basement rocks during the Neogene, forming the modern-day physiographic provinces. Rocks of the four basement rock assemblages are divisible into an older suite of Late Cretaceous and older rocks and a younger suite of post-Late Cretaceous rocks. The age span of the older suite varies considerably from assemblage to assemblage, and the point in time that separates the two suites varies slightly. In the Peninsular Ranges, the older rocks were formed from the Paleozoic to the end of Late Cretaceous plutonism, and in the Transverse Ranges over a longer period of time extending from the Proterozoic to metamorphism at the end of the Cretaceous. Within the Peninsular Ranges a profound diachronous unconformity marks the pre-Late Cretaceous-post-Late Cretaceous subdivision, but within the Transverse Ranges the division appears to be slightly younger, perhaps coinciding with the end of the Cretaceous or extending into the early Cenozoic. Initial docking of Peninsular Ranges rocks with Transverse Ranges rocks appears to have occurred at the terminus of plutonism within the Peninsular Ranges. During the Paleogene there was apparently discontinuous but widespread deposition on the basement rocks and little tectonic disruption of the amalgamated older rocks. Dismemberment of these Paleogene and older rocks by strike-slip, thrust, and reverse faulting began in the Neogene and is ongoing. The Peninsular Ranges basement rock assemblage is made up of the Peninsular Ranges batholith and a variety of metasedimentary rocks. Most of the plutonic rocks of the batholith are granodiorite and tonalite in composition; primary foliation is common, mainly in the eastern part. Tertiary sedimentary rocks of the Los Angeles Basin crop out in the Puente and San Jose Hills along with the spatially associated Glendora Volcanics; both units span the boundary between the Peninsular Ranges and San Gabriel Mountains basement rock assemblages. The San Gabriel Mountains basement rock assemblage includes two discrete areas, the high standing San Gabriel Mountains and the relatively low San Bernardino basin east of the San Jacinto Fault. The basement rock assemblage is characterized by a unique suite of rocks that include anorthosite, Proterozoic and Paleozoic gneiss and schist, the Triassic

California↗
USGS2000

Digital geologic map of the Butler Peak 7.5' quadrangle, San Bernardino County, California

Open-File Report 00-145, is a digital geologic map database of the Butler Peak 7.5' quadrangle that includes (1) ARC/INFO ( Environmental Systems Research Institute ) version 7.2.1 Patch 1 coverages, and associated tables, (2) a Portable Document Format (.pdf) file of the Description of Map Units, Correlation of Map Units chart, and an explanation of symbols used on the map, btlrpk_dcmu.pdf, (3) a Portable Document Format file of this Readme, btlrpk_rme.pdf (the Readme is also included as an ascii file in the data package), and (4) a PostScript plot file of the map, Correlation of Map Units, and Description of Map Units on a single sheet, btlrpk.ps. No paper map is included in the Open-File report, but the PostScript plot file (number 4 above) can be used to produce one. The PostScript plot file generates a map, peripheral text, and diagrams in the editorial format of USGS Geologic Investigation Series (I-series) maps.

California↗
USGS1977

Comparison of granitic intrusions in the Pelona and Orocopia Schists, southern California

Dating of some small plutons in the San Gabriel and Chocolate Mountains, southern California, yields Miocene K-Ar ages. A single granodiorite pluton that has been segmented by branches of the San Jacinto fault intrudes the Pelona Schist and yields ages of 14.0 to 18.6 million years. Several quartz monzonite plutons in the Chocolate Mountains, 235 kilometers to the southeast and on the opposite side of the San Andreas fault, yield ages ranging from 20.0 to 23.4 m.y. At least one pluton in the Chocolate Mountains intrudes the Orocopia Schist, a probable equivalent of the Pelona Schist. Chemical, modal, textural, mineralogical, and apparent K-Ar age differences suggest that the two groups of plutons are not offset parts of a single body, but the differences do not preclude the two groups from being related in a general way.

California↗