EXPLORE THE ARCHIVE

Elizabeth S. Cochran

Publications and source records attributed to Elizabeth S. Cochran.

9 recordsLinked to original sources

USGS2026

Small earthquake moment magnitude and implications for frequency–magnitude scaling of injection induced earthquakes of the Raton Basin

Accurate estimation of earthquake source parameters—such as moment magnitudes, corner frequencies, and stress drops—is essential for improving seismic hazard assessments and understanding earthquake physics. In this study, moment magnitudes ( M W ) are calculated for 31,581 earthquakes associated with wastewater injection in the Raton Basin (located along the border between northern New Mexico and southern Colorado) between 2016 and 2024 using radiative transfer theory to fit coda decay envelopes. Our results show that it is feasible to estimate moment magnitudes down to M W ~1 with coda envelopes from a small local monitoring network. Significant differences were found between M W and local magnitudes ( M L ) for small earthquakes ( M < 3.0). A linear relationship was optimized to convert M L to M W : M W = 0.7 M L + 0.96 and M W = 0.73 M L + 0.99 (for the events reported by the U.S. Geological Survey), which can be applied in future studies of Raton Basin seismicity. We find that b -values calculated employing different methods and using M L are approximately 1.0, while those using M W range from 1.2 to 1.4. A larger estimate of the b -value could influence interpretations of the statistical behavior of earthquakes associated with injection and consequently seismic hazard assessments based on a magnitude–frequency distribution. The potential differences between local versus moment magnitude-based earthquake statistics should be considered in other seismically active regions.

Colorado, New Mexico↗

USGS2025

Near-fault amplification and ground motion variability during the 2019 Ridgecrest, California sequence

We estimate ground-motion variability near the 2019 M 7.1 Ridgecrest earthquake sequence. Accurate seismic hazard estimation requires understanding ground-motion spatial correlations, yet many studies lack the dense station coverage needed to resolve small-scale variability. The 2019 M 7.1 Ridgecrest earthquake sequence presents a unique opportunity to examine ground motions and their spatial correlations at a range of interstation distances. The permanent seismic network was augmented with hundreds of temporary stations including several fault-crossing nodal arrays. We compute the event ( δE i ) and within-event ( δW ij ) residuals from the observed peak ground velocity and peak ground acceleration data to isolate potential sources of ground-motion variability. We then compare δW ij between station pairs that record an event to understand the semivariance of the ground motion versus interstation distance. By fitting an exponential model to the semivariances, we determine a correlation range of 25 km for the Ridgecrest region. Although the exponential model fits the broad-scale increase of semivariance with interstation distance, we also observe smaller-scale trends. We find that ground motions are less correlated for station pairs that are near or across faults that ruptured during the 2019 Ridgecrest sequence. We also find large, positive median δW ij with relative values 2–3 times larger than nearby stations for individual stations’ near-fault traces. Near-fault amplification and greater ground-motion variability can delineate fault zones and may locally increase the seismic hazard.

California↗

USGS2025

Potential for continental scientific drilling to inform fault mechanics and earthquake science

Our understanding of fault mechanics and earthquake processes remains limited, largely due to minimal direct observations near active faults at seismogenic depths. This lack of data restricts our ability to accurately assess and mitigate both natural and human-induced seismic hazards. However, recent advancements in drilling capabilities and downhole sensing technologies offer an opportunity: the ability to observe the physical conditions within a volume near active fault zones. In this contribution, we highlight how scientific drilling can provide access to the near-fault environment, enabling measurements of the stress, temperature, fluid pressure, and rock properties at depths where ruptures initiate, propagate, and arrest. These observations are essential to refine models of earthquake nucleation and dynamic rupture, bridging gaps between laboratory experiments, numerical simulations, and surface observations. These insights can advance fundamental understanding in earthquake science but also support the development of more effective seismic hazard assessments and risk mitigation strategies.

Seismica↗

USGS2025

Earthquake stress-drop values delineate spatial variations in maximum shear stress in the Japanese forearc lithosphere

Earthquake stress drop (Δσ) may increase with depth and stress in the brittle lithosphere. However, the range of uncertainty in Δσ and the lack of constraints on absolute stress make it difficult to establish whether they are correlated. Here, we investigate Δσ dependence on depth and maximum shear stress ( τ max ) based on ~11 years of seismicity in the northeastern Japanese forearc following the 2011 Tohoku-Oki megathrust earthquake. We interpret Δσ estimates computed using both individual spectra and spectral-ratio methods and find that Δσ exhibits a clear depth dependence within the seismically active upper ~60 km of the forearc lithosphere ( ~ 0.8 MPa per 10 km). We further compare Δσ values with quantitative τ max estimates from finite-element models of force balance. We find that median Δσ values increase with τ max in the brittle forearc lithosphere and that earthquake stress release is proportional to τ max . The dependence of Δσ on τ max explains the apparent depth dependence of Δσ and suggests that average Δσ values provide a relative measure of the stress at failure. In the northeastern Japanese forearc, Δσ values remained roughly constant in the decade following the Tohoku-Oki earthquake, suggesting negligible changes in failure stress in the forearc since the mainshock.

Communications Earth and Environment↗

USGS2025

Refinements to the attenuated propagation of local earthquake shaking (APPLES) ground-motion-based earthquake early warning algorithm

We refined the Attenuated ProPagation of Local Earthquake Shaking (APPLES) ground-motion-based earthquake early warning (EEW) approach, and directly compare APPLES performance with that of the source-characterization-based U.S. ShakeAlert EEW system for a suite of historical earthquakes in the U.S. West Coast and Japan. APPLES is an extension of the Propagation of Local Undamped Motion (PLUM) algorithm in which observed shaking intensity at seismic stations is used to forward-predict intensity distributions to surrounding areas using an attenuation model derived from an intensity prediction equation. We test new configuration options within APPLES, such as using the second highest estimated ground motion rather than the maximum, to better match median ground-motion observations and reduce alerts for small magnitude earthquakes, both of which are key alerting priorities within ShakeAlert. We evaluate these configurations alongside ShakeAlert by comparing the ground-motion estimation accuracy and available warning times relative to station observations and ShakeMap distributions. Our preferred APPLES configuration produces accurate ground-motion estimates and corresponds better with median observations compared to ShakeAlert’s estimates. This preferred configuration substantially reduces alert issuance for M < 5.0 earthquakes compared to the previous APPLES configuration, and alert-release criteria can further restrict alerts to primarily M ≥ 5.5 earthquakes without requiring magnitude estimation. Prioritizing matching median-observed ground motions may reduce APPLES warning times compared to configurations that were tuned to avoid missed alerts (such as those that use the maximum estimated ground motions), which can lead to shorter warning times compared to ShakeAlert for the same alert threshold. However, station-based warning time assessments demonstrate that APPLES can outperform ShakeAlert for high target thresholds. APPLES is a simple, independent EEW approach that may improve the robustness of EEW for the West Coast of the U.S.

California, Oregon, Washington↗

USGS2025

To heal or not to heal?: 2. The moment-recurrence time behavior of repeating earthquakes in the 2011 Prague, Oklahoma aftershock sequence is consistent with laboratory healing rates

The timing and failure conditions of an earthquake are governed by the interplay between fault reloading and restrengthening. The moment-recurrence time behavior of repeating earthquakes can give observational estimates of fault healing rates; however, it is difficult to link these observed healing rates to laboratory studies of frictional healing in part because of uncertainty in lithology. Here, we study the 2011 Prague earthquake sequence, which includes repeating earthquakes in the Arbuckle group and the granitic basement, and compare them to laboratory experiments on samples of the Arbuckle and Troy granite (representative of the basement rock) (Okamoto et al., 2025, https://doi.org/10.1029/2024JB030573 ). We find three spatially distinct groups of repeating earthquakes with different moment-recurrence behavior: (a) constant moment-recurrence time in the Arbuckle group, (b) scattered moment-recurrence time at the intersection of the foreshock-mainshock fault in the granitic basement, and (c) moment-predictable behavior outside of the foreshock-mainshock fault intersection also in the granitic basement. Our observation of stagnant healing for repeating sequences in the Arbuckle group is consistent with laboratory observations of low healing rates for moderately high pore fluid pressures in Arbuckle samples. For the moment-predictable group, the source radius that is required in order to match healing rates is consistent with source radius estimations when taking into account reasonable attenuation of the P- pulse width. Overall, we observe diverse healing behaviors in the seismic families that are consistent with laboratory healing rates, providing seismic evidence that contact-scale frictional mechanisms are relevant to large-scale earthquake dynamics.

Oklahoma↗

USGS2025

Mechanics and statistics of postseismic shaking

Analysis of two weeks of continuous post-seismic shaking after the 2019 M7.1 Ridgecrest, CA earthquake sequence using 4 nearby borehole seismometers reveals that continuous ground motions decay as Omori’s law in time and follow the Gutenberg-Richter distribution in logarithmic amplitude. The measured temporal decay in amplitudes agrees with predictions of the rate-and-state framework and indicates shaking amplitudes are proportional to the velocity of afterslip. Our ground motion-based statistical framework provides a basis to forecast shaking intensity in the minutes to hours after a large earthquake.

California↗

USGS2025

A scientific vision and roadmap for earthquake rupture forecast developments, a USGS perspective

We articulate a scientific vision and roadmap for the development of improved Earthquake Rupture Forecast models, which are one of the two main modeling components used in modern seismic hazard and risk analysis. One primary future objective is to provide fully time-dependent models that include both elastic rebound and spatiotemporal clustering nationwide, which is particularly important for shorter-term hazard and risk considerations (e.g., earthquake insurance products). We also discuss the importance and perennial challenges associated with quantifying epistemic uncertainties, including those associated with deformation-model slip rates, un-quantified sampling errors with respect to off-fault seismicity, and any spatial covariances. The need for more physics-based approaches is also emphasized, as is the benefit of adding model valuation (quantifying usefulness) to our verification and validation protocols. Given the multidisciplinary and system-level nature of this activity, modular design is critical. Future updates will also draw from best-available science by both the United States Geological Survey and the external community. The primary goal of this paper is to highlight plans that guide research and facilitate community engagement with model development, especially with respect to lowering the entry barrier for early career scientists and engineers. The paper is written so readers can focus on the sections that interest them most (see table of contents), with the Introduction and Discussion providing a stand-alone overview and summary.

Bulletin of the Seismological Society of America↗

USGS2025

Impact of gas/liquid phase change of CO2 during injection for sequestration

CO 2 sequestration in deep saline formations is an effective and important process to control the rapid rise in CO 2 emissions. The process of injecting CO 2 requires reliable predictions of the stress in the formation and the fluid pressure distributions – particularly since monitoring of the CO 2 migration is difficult – to mitigate leakage, prevent induced seismicity, and analyze wellbore stability. A key aspect of CO 2 is the gas–liquid phase transition at the temperatures and pressures of relevance to leakage and sequestration, which has been recognized as being critical for accurate predictions but has been challenging to model without ad hoc empiricisms. This paper presents a robust multiphase thermodynamics-based poromechanics model to capture the complex phase transition behavior of CO 2 and predict the stress and pressure distribution under super- and sub- critical conditions during the injection process. A finite element implementation of the model is applied to analyze the behavior of a multiphase porous system with CO 2 as it displaces the fluid brine phase. We find that if CO 2 undergoes a phase transition in the geologic reservoir, the spatial variation of the density is significantly affected, and the migration mobility of CO 2 decreases in the reservoir. A key feature of our approach is that we do not a priori assume the location of the CO 2 gas/liquid interface – or even if it occurs at all – but rather, this is a prediction of the model, along with the spatial variation of the phase of CO 2 and the change of the saturation profile due to the phase change.

Journal of the Mechanics and Physics of Solids↗